Engineering Commons^™

Table 6.03, Mark E. Shaurette

Supplementary Content for <em>Demolition: Practices, Technology, and Management</em> <br>(ISBN 978-1-55753-567-2)

No abstract provided.

Throughput And Delay Analysis On Uncoded And Coded Wireless Broadcast With Hard Deadline Constraints, Xiaohang Li, Chih-Chun Wang, Xiaojun Lin

Department of Electrical and Computer Engineering Technical Reports

Multimedia streaming applications have stringent QoS requirements. Typically each packet is associated with a packet delivery deadline. This work models and considers realtime streaming broadcast over the downlink of a single cell. The broadcast capacity of the system subject to deadline constraints are studied for both uncoded and coded wireless broadcast schemes. For the uncoded scenario, an optimal transmission policy is devised based on finite-horizon dynamic programming, and a closed-form expression of the optimal throughput is developed in the asymptotic regime, as the size of the file approaches infinity. For the coded scenario, the optimal capacity in the asymptotic regime …

A Reactive Molecular Dynamics Simulation Of The Silica-Water Interface, Joseph C. Fogarty, Hasan Metin Aktulga, Ananth Y. Grama, Adri C. T. Van Duin, Sagar A. Pandit

PRISM: NNSA Center for Prediction of Reliability, Integrity and Survivability of Microsystems

We report our study of a silica-water interface using reactive molecular dynamics. This first-of-its-kind simulation achieves length and time scales required to investigate the detailed chemistry of the system. Our molecular dynamics approach is based on the ReaxFF force field of van Duin [J. Phys. Chem. A 107, 3803 (2003)]. The specific ReaxFF implementation (SERIALREAX) and force fields are first validated on structural properties of pure silica and water systems. Chemical reactions between reactive water and dangling bonds on a freshly cut silica surface are analyzed by studying changing chemical composition at the interface. In our simulations, reactions involving silanol …

Probabilistic Matching Pursuit For Compressive Sensing, Atul Divekar, Okan K. Ersoy

Department of Electrical and Computer Engineering Technical Reports

Compressive sensing investigates the recovery of a signal that can be sparsely represented in an orthonormal basis or overcomplete dictionary given a small number of linear combinations of the signal. We present a novel matching pursuit algorithm that uses the measurements to probabilistically select a subset of bases that is likely to contain the true bases constituting the signal. The algorithm is successful in recovering the original signal in cases where deterministic matching pursuit algorithms fail. We also show that exact recovery is possible when the number of nonzero coefficients is upto one less than the number of measurements. This …

Experimental Observation Of The Trapped Rainbow, Vera N. Smolyaninova, Igor Smolyaninov, Alexander V. Kildishev, V. M. Shalaev

Birck and NCN Publications

We report on the experimental demonstration of the broadband "trapped rainbow" in the visible frequency range using an adiabatically tapered optical nano waveguide. Being a distinct case of the slow light phenomenon, the trapped rainbow effect could be applied to optical computing and signal processing, such as spectroscopy on a chip, and to providing enhanced light-matter interactions. (C) 2010 American Institute of Physics.

Higher-Order Eigenmodes Of Qplus Sensors For High Resolution Dynamic Atomic Force Microscopy, Ryan C. Tung, Thorsten Wutscher, David Martinez-Martin, R. Reifenberger, Franz Giessibl, Arvind Raman

Birck and NCN Publications

The time response of tuning-fork based sensors can be improved by operating them at higher eigenmodes because a measurement takes at least one oscillation cycle in dynamic force microscopy and the oscillation period of the second eigenmode is only about one sixth of the fundamental mode. Here we study the higher-order eigenmodes of quartz qPlus sensors [Bettac et al., Nanotechnology 20, 264009 (2009); Giessibl and Reichling, Nanotechnology 16, S118 (2005); Giessibl, Appl. Phys. Lett. 76, 1470 (2000); and Giessibl, Appl. Phys. Lett. 73, 3956 (1998)], their equivalent stiffness, and piezoelectric sensitivity, while paying special attention to the influence of the …

An Experimental Investigation On Viscoelastic Behavior In Tunable, Hao-Han Hsu, Dimitrios Peroulis

PRISM: NNSA Center for Prediction of Reliability, Integrity and Survivability of Microsystems

Abstract—In this paper, the viscoelastic behavior of a tunable RF-MEMS resonator and its impacts are studied by means of direct RF measurements for the first time. This tunable resonator consists of one λ/2 coplanar waveguide (CPW) resonator and two nanocrystalline-Ni RF-MEMS varactors. S-parameters of this tunable resonator have been measured for 80 hours under a bi-state bias condition of 0 and 40 V. It is demonstrated that the resonant frequency is shifted by 90 MHz and the varactor deformed by 0.12 μm over the 80 hour period. The gap of the loaded varactor is extracted from the measured S-parameters using …

Nanoscale Metal-Metal Contact Physics From Molecular Dynamics: The Strongest Contact Size, Hojin Kim, Alejandro Strachan

Birck and NCN Publications

Using molecular dynamics we find that the tensile strength of the contacts between two clean platinum surfaces with nanoscale asperities is strongly size dependent with a maximum strength for contact lengths of approximately 5 nm. This is the first time a strongest size is observed in single crystals. The strengthening with decreasing size down to 5 nm results from a decrease in the initial density of mobile dislocations available for plastic deformation and the subsequent weakening originates from a reduction in the constraint to mechanical deformation inside the contact by the bulk.

Evaluation Of In-Situ Stiffness Of Subgrade By Resilient And Fwd Modulus, Daehyeon Kim, Yigong Ji, Nayyar Zia Siddiki

JTRP Technical Reports

Resilient modulus has been used for characterizing the stress-strain behavior of subgrade soils subjected to traffic loadings in the design of pavements. With the recent release of the M-E Pavement Design Guide, highway agencies are further encouraged to implement the resilient modulus test to improve subgrade design. A laboratory resilient modus test and a FWD test are usually used to obtain the resilient modulus of subgrade. However, the difference in the resilient modulus obtained from these two methods is considerably large due to the fact that these tests are conducted under different conditions. This difference gives engineers a significant confusion …

Travel Time Reliability In Indiana, Maria Martchouk, Fred L. Mannering, Lakhwinder Singh

JTRP Technical Reports

Travel time and travel time reliability are important performance measures for assessing traffic condition and extent of congestion on a roadway. This study first uses a floating car technique to assess travel time and travel time reliability on a number of Indiana highways. Then the study goes on to describe the use of Bluetooth technology to collect real travel time data on a freeway and applies it to obtain two weeks of data on Interstate 69 in Indianapolis. An autoregressive model, estimated based on the collected data, is then proposed to predict individual vehicle travel times on a freeway segment. …

Development Of A Structural Index As An Integral Part Of The Overall Pavement Quality In The Indot Pms, William Frederick Flora, Ghim Ping (Raymond) Ong, Kumares C. Sinha

JTRP Technical Reports

No abstract provided.

Extraordinary Transmission From High-Gain Nanoaperture Antennas, Edward C. Kinzel, Pornsak Srisungsitthisunti, Yan Li, Arvind Raman, Xianfan Xu

Birck and NCN Publications

This letter describes a bowtie nanoaperture antenna for coupling light to a subdiffraction limited near-field spot (<λ/8). The gain of the antenna is increased using a concentric grating structure to coherently diffract normally incident light toward the aperture. We experimentally demonstrate that the addition of the grating structure enhances the far-field transmission through the aperture by 6.9 times while the intensity at the near-field is increased more than 15 times. The nanoantenna is useful for applications including nanolithography and data storage.

Simulation Of Nanowire Tunneling Transistors: From The Wentzel-Kramers-Brillouin Approximation To Full-Band Phonon-Assisted Tunneling, Mathieu Luisier, Gerhard Klimeck

Birck and NCN Publications

Nanowire band-to-band tunneling field-effect transistors 􏰀TFETs􏰁 are simulated using the Wentzel– Kramers–Brillouin 􏰀WKB􏰁 approximation and an atomistic, full-band quantum transport solver including direct and phonon-assisted tunneling 􏰀PAT􏰁. It is found that the WKB approximation properly works if one single imaginary path connecting the valence band 􏰀VB􏰁 and the conduction band 􏰀CB􏰁 dominates the tunneling process as in direct band gap semiconductors. However, PAT is essential in Si and Ge nanowire TFETs where multiple, tightly-coupled, imaginary paths exist between the VB and the CB. © 2010 American Institute of Physics. 􏰂doi:10.1063/1.3386521􏰃

Chaos-Assisted Directional Light Emission From Microcavity Lasers, Susumu Shinohara, Takahisa Harayama, Takehiro Fukushima, Martina Hentschel, Takahiko Sasaki, Evgenii Narimanov

Birck and NCN Publications

We study the effect of dynamical tunneling on emission from ray-chaotic microcavities by introducing a suitably designed deformed disk cavity. We focus on its high quality factor modes strongly localized along a stable periodic ray orbit confined by total internal reflection. It is shown that dominant emission originates from the tunneling from the periodic ray orbit to chaotic ones; the latter eventually escape from the cavity refractively, resulting in directional emission that is unexpected from the geometry of the periodic orbit, but fully explained by unstable manifolds of chaotic ray dynamics. Experimentally performing selective excitation of those modes, we succeeded …

Computational Study Of An Ingan/Gan Nanocolumn Light-Emitting Diode, Christoph Boecklin, Ratko G. Veprek, Sebastian Steiger, Bernd Witzigmann

Birck and NCN Publications

A comprehensive three-dimensional analysis of the operation of an In0.4Ga0.6N/GaN nanocolumn light-emitting diode is presented. Focus is put on the investigation of the nature and location of the emitting states. Calculations of strain and polarization-induced internal fields show that the strong lateral dependence of the potential gives rise to states confined to the periphery and to the center of the nanocolumn. However, lateral confinement of states near the column center is weak such that a quantum-well-like treatment of the remaining bound states seems appropriate where coherence is lost in the lateral directions. Within this picture, a coupled and self-consistent three-dimensional …

Uncertainty Quantification Models For Micro-Scale Squeeze-Film Damping, Xiaohui Guo, Jia Li, Dongbin Xiu, Alina Alexeenko

PRISM: NNSA Center for Prediction of Reliability, Integrity and Survivability of Microsystems

Two squeeze-film gas damping models are proposed to quantify uncertainties associated with the gap size and the ambient pressure. Modeling of gas damping has become a subject of increased interest in recent years due to its importance in micro-electro-mechanical systems (MEMS). In addition to the need for gas damping models for design of MEMS with movable micro-structures, knowledge of parameter dependence in gas damping contributes to the understanding of device-level reliability. In this work, two damping models quantifying the uncertainty in parameters are generated based on rarefied flow simulations. One is a generalized polynomial chaos (gPC) model, which is a …

Use Of Dynamic Cone Penetration And Clegg Hammer Tests For Quality Control Of Roadway Compaction And Construction, Hobi Kim, Monica Prezzi, Rodrigo Salgado

JTRP Technical Reports

Soil compaction quality control presently relies on the determination of the in-place compacted dry unit weight, which is then compared with the maximum dry unit weight obtained from a laboratory compaction test. INDOT requires that the in-place dry unit weight for compacted soil be over 95% of the laboratory maximum dry unit weight. In order to determine the in-place dry unit weight, INDOT engineers generally use nuclear gauges, which are hazardous and also costly because of the required safety precautions. Thus, several alternative tests such as the Dynamic Cone Penetration Test (DCPT) and the Clegg Hammer Test (CHT) were introduced …

Geotechnical Design Based On Cpt And Pmt, Daehyeon Kim, Younjin Shin, Nayyar Siddiki

JTRP Technical Reports

This research presents the correlation of undrained shear strength based on the cone resistance from the cone penetration test (CPT) for clayey soils in Indiana. It utilized the field cone penetration test program including the CPT, the index test, the one dimensional test and the triaxial test. The cone factor, which is essential to reliable estimation of undrained shear strength from cone resistance, has been evaluated considering the plasticity index of soils. The cone factor is influenced by the penetration rate during the CPT and test methods that are used for obtaining the undrained shear strength. The rate effect of …

Monitoring And Predicting Traffic Induced Vertebrate Mortality Near Wetlands, J. Andrew Dewoody, Jamie M. Nogle, Melissa Hoover, Barny Dunning

JTRP Technical Reports

Animal-vehicle collisions are undesirable to the general public, to drivers, to insurance providers, to biologists, and presumably to the animals themselves. However, traffic-induced mortality (―roadkill‖) is difficult to mitigate in large part because scientists lack the empirical data required to understand the patterns and processes associated with roadkill. Roadkill is not randomly distributed in space or in time, but what are the primary determinants of roadkill? And do they differ across organismal groups? We monitored vertebrate roadkill at 6 wetland and 6 upland sites in Indiana twice a week for a period of 20 months to determine whether roadkill occurs …

High-Performance Concrete Bridge Decks: A Fast-Track Implementation Study Volume 2: Materials, Mateusz Radlinski, Jan Olek

JTRP Technical Reports

The purpose of this research was to examine the applicability of ternary binder systems containing ordinary portland cement (OPC), class C fly ash (FA) and silica fume (SF) for bridge deck concrete. This was accomplished in two parts, the laboratory part and a field application part.

During the laboratory studies, four ternary mixtures, each containing either 20% or 30% FA and either 5% or 7% SF were subjected to four different curing regimes (air drying, 7 days curing compound application and 3 or 7 days wet burlap curing). In general, all four ternary mixtures exhibited very good water and chloride …

Fabrication Of Conductive Interconnects By Ag Migration In Cu-Ag Core-Shell Nanoparticles, Suk Jun Kim, E A. Stach, Carol A. Handwerker

Birck and NCN Publications

Fabrication of conductive nanoparticle films is observed in Cu-Ag core-shell nanoparticles by fast diffusion of Ag at 220 degrees C from particle surfaces, leading to the formation of sintered necks of Ag at the initial particle-particle contacts. Transmission electron microscopy showed that the necks were pure Ag and that particle surfaces away from the contacts were nearly Ag-free. The extent of neck formation is controllable by the choice of initial Ag thickness. Analysis of the thermodynamics of the Ag-Cu system and the relative diffusivities of Ag and Cu provide criteria for fabrication of other core-shell two-phase systems by the same …

Library Scholars Grant Presentation, Brent K. Jesiek

Library Scholars Grant Program

The primary goal of this project is to document the historical development of computer engineering as a distinct academic discipline and professional specialty in the United States, from the origins of the field in the 1940s to the early 2000s. My research is more specifically focused on three main contexts: a) the computer industry, b) professional organizations and sub-groups, and c) academic departments, degree programs, and curricula.

Strain-Induced, Off-Diagonal, Same-Atom Parameters In Empirical Tight-Binding Theory Suitable For [110] Uniaxial Strain Applied To A Silicon Parametrization, Timothy B. Boykin, Mathieu Luisier, Mehdi Salmani-Jelodar, Gerhard Klimeck

Birck and NCN Publications

State-of-the-art transistors achieve their improved performance through strain engineering. The somewhat unusual uniaxial [110] strain is of particular importance as it provides a significant mobility increase for electrons. Empirical tight binding has shown tremendous benefits in modeling realistically large structures including standard strain conditions, but often fails to predict the correct uniaxial [110] strain behavior because most treatments neglect the same-atom different-orbital matrix elements induced by this strain. Two separate mechanisms are responsible for these conditions: Loumlwdin orbital changes and displacement of nearest-neighbor potentials. We present a model which separately includes both mechanisms via parameters whose range of validity can …

Electronic Transport In Chemical Vapor Deposited Graphene Synthesized On Cu: Quantum Hall Effect And Weak Localization, Helin Cao, Qingkai Yu, Luis A. Jauregui, J Tian, W Wu, Z Liu, Ramaneh Jalilian, D K. Benjamin, Z Jiang, J Bao, S S. Pei, Yong P. Chen

Birck and NCN Publications

We report on electronic properties of graphene synthesized by chemical vapor deposition (CVD) on copper then transferred to SiO2/Si. Wafer-scale (up to 4 in.) graphene films have been synthesized, consisting dominantly of monolayer graphene as indicated by spectroscopic Raman mapping. Low temperature transport measurements are performed on microdevices fabricated from such CVD graphene, displaying ambipolar field effect (with on/off ratio similar to 5 and carrier mobilities up to similar to 3000 cm(2)/V s) and "half-integer" quantum Hall effect, a hall-mark of intrinsic electronic properties of monolayer graphene. We also observe weak localization and extract information about phase coherence and scattering …

Note: Thermal Analog To Atomic Force Microscopy Force-Displacement Measurements For Nanoscale Interfacial Contact Resistance, Brian D. Iverson, John Blendell, Suresh Garimella

Birck and NCN Publications

Thermal diffusion measurements on polymethylmethacrylate-coated Si substrates using heated atomic force microscopy tips were performed to determine the contact resistance between an organic thin film and Si. The measurement methodology presented demonstrates how the thermal contrast signal obtained during a force-displacement ramp is used to quantify the resistance to heat transfer through an internal interface. The results also delineate the interrogation thickness beyond which thermal diffusion in the organic thin film is not affected appreciably by the underlying substrate.

A Continuum Plasticity Model That Accounts For Hardening And Size Effects In Thin Films, Abigail Hunter, Hariharanath Kavuri, Marisol Koslowski

PRISM: NNSA Center for Prediction of Reliability, Integrity and Survivability of Microsystems

We conducted three-dimensional finite element simulations of the mechanical response of passivated single crystal copper thin films with a continuum crystal plasticity model. The model introduces the formation of high density dislocation layers close to the substrate and passivation interfaces obtained from dislocation dynamics simulations. These dislocation structures are responsible for an increase in strain hardening as the film thickness decreases. The model predicts an increase in strain hardening as the film thickness decreases in agreement with experimental observation in films with thickness in the range 0.2 to 2μm.

Identification And Implementation Of Best Management Practices For Erosion And Sediment Control That Conform To Indiana Storm Water Quality Regulations And Guidance, Lynn A. Corson

JTRP Technical Reports

No abstract provided.

Development Of A Framework For Ex Post Facto Evaluation Of Highway Project Costs In Indiana, Abhishek Bhargava, Samuel Labi, Kumares C. Sinha

JTRP Technical Reports

Researchers and engineers continue to ponder over the reliability of construction cost forecasts made at the early stages of project development. After a project has been incorporated in the statewide transportation improvement program, increasingly detailed estimates of its cost are prepared at the remaining stages of project development, namely, design estimate, engineer’s estimate, and bid estimate. The accuracy of such estimates has critical consequences on contract administration and asset management in general. Most agencies do not have a methodological framework to identify projects where final cost is likely to exceed the cost estimate, or where the cost estimate is likely …

Innovative Bridge Construction Program: Implementation Of Full-Depth Bridge Deck Panels In Indiana, Robert J. Frosch, Julio A. Ramirez, Stephen Price

JTRP Technical Reports

This research evaluates the use of precast, prestressed bridge deck panels on new and existing precast, prestressed concrete girders. The evaluation focuses on the ease of construction and the ability of the system to develop composite action with the concrete girders. A system developed by the Connecticut Department of Transportation (CDOT) and Precast/Prestressed Concrete Institute New England Region (PCINER) was chosen for testing from available systems because it is representative of the current geometry of precast bridge deck panels. The CDOT system was evaluated in a series of large scale tests in which the panels were placed on a 40 …

A Truck-Mounted Scour Inspection System For Indot, Dennis Lyn, Thomas Cooper, Ranadeep Das

JTRP Technical Reports

Scour monitoring may be a useful tool for INDOT in dealing with local scour problems at bridge sites, and a truck-mounted scour-monitoring system is an attractive option offering flexibility in deployment and cost-effectiveness. This report deals with two aspects related to the further development of such a system: i) a web application that combines the latest available information regarding streamflow with relevant information regarding bridges considered susceptible to bridge scour, thereby assisting in truck-deployment decisions, and ii) development of an acoustic positioning system as a replacement of the original mechanical positioning in order to improve the ease of use.

The …