Engineering Commons^™

Improving Near-Field Confinement Of A Bowtie Aperture Using Surface Plasmon Polaritons, Pornsak Srisungsitthisunti, Okan Ersoy, Xianfan Xu

Birck and NCN Publications

Bowtie aperture is known to produce subdiffraction-limited optical spot with high intensity. In this work, we investigate integrating a bowtie aperture with circular grooves to reduce the divergence of the near-field produced by the bowtie aperture. Numerical results indicate that surface waves reflected from circular grooves improve the field confinement of a bowtie aperture along the polarization axis. These circular grooves with period near half the wavelength of surface plasmon polaritons reduce the spot size by as much as 40% at distances between 20 and 100 nm from the surface and create a more symmetrical optical spot. (C) 2011 American …

Chaos-Assisted Emission From Asymmetric Resonant Cavity Microlasers, Susumu Shinohara, Takahisa Harayama, Takehiro Fukushima, Martina Hentschel, Satoshi Sunada, Evgenii Narimanov

Birck and NCN Publications

We study emission from quasi-one-dimensional modes of an asymmetric resonant cavity that are associated with a stable periodic ray orbit confined inside the cavity by total internal reflection. It is numerically demonstrated that such modes exhibit directional emission, which is explained by chaos-assisted emission induced by dynamical tunneling. Fabricating semiconductor microlasers with an asymmetric resonant cavity, we experimentally demonstrate the selective excitation of the quasi-one-dimensional modes by employing the device structure to preferentially inject currents to these modes and observe directional emission in good accordance with the theoretical prediction based on chaos-assisted emission.

Experimental And Theoretical Study Of Polarization-Dependent Optical Transitions In Inas Quantum Dots At Telecommunication-Wavelengths (1300-1500 Nm), Muhammad Usman, Susannah Heck, Edmund Clarke, Peter Spencer, Hoon Ryu, Ray Murray, Gerhard Klimeck

Birck and NCN Publications

observed, in contrast to recent reports for single QDJOURNAL OF APPLIED PHYSICS 109, 104510 (2011)
The design of some optical devices, such as semiconductor optical amplifiers for telecommunication applications, requires polarization-insensitive optical emission at long wavelengths (1300–1550 nm). Self-assembled InAs/GaAs quantum dots (QDs) typically exhibit ground state optical emissions at wavelengths shorter than 1300 nm with highly polarization-sensitive characteristics, although this can be modified by the use of low growth rates, the incorporation of strain-reducing capping layers, or the growth of closely-stacked QD layers. Exploiting the strain interactions between closely stacked QD layers also affords greater freedom in the choice …

Engineered Valley-Orbit Splittings In Quantum-Confined Nanostructures In Silicon, Rajib Rahman, J. Verdujin, Neerav Kharche, Gabriel Lansbergen, Purdue University Gerhard Klimeck, Lloyd Hollenberg, Sven Rogge

Birck and NCN Publications

An important challenge in silicon quantum electronics in the few electron regime is the poten- tially small energy gap between the ground and excited orbital states in 3D quantum confined nanostructures due to the multiple valley degeneracies of the conduction band present in silicon. Understanding the “valley-orbit” (VO) gap is essential for silicon qubits, as a large VO gap prevents leakage of the qubit states into a higher dimensional Hilbert space. The VO gap varies considerably depending on quantum confinement, and can be engineered by external electric fields. In this work we investigate VO splitting experimentally and theoretically in a …

Parametric Assessment Of Stress Development And Cracking In Restrained Mortars Containing Internal Curing Under Autogenous And Thermal Loading, Kambiz Raoufi, John Schlitter, Dale Bentz, Jason Weiss

Lyles School of Civil Engineering Faculty Publications

A finite element model is used to examine how the properties of cementitious mortar are related to the stress development in the dual ring test. The results of this investigation are used to explain the thermal cracking behavior of mixtures containing prewetted lightweight aggregates (LWA) by quantifying the contribution of several material properties individually. In addition to the beneficial effects of using the LWA as an internal curing agent to reduce the autogenous shrinkage of concrete, the LWA also helps to reduce the potential for thermal cracking due to a lower elastic modulus and increased stress relaxation. The rate of …

Fabrication And Realistic Modeling Of Three-Dimensional Metal-Dielectric Composites, Mark D. Thoreson, Jieran R. Fang, Alexander V. Kildishev, Ludmila J. Prokopeva, Piotr Nyga, Uday K. Chettiar, Vladimir M. Shalaev, Vladimir P. Drachev

Birck and NCN Publications

Historically, the methods used to describe the electromagnetic response of random, three-dimensional (3D), metal-dielectric composites (MDCs) have been limited to approximations such as effective-medium theories that employ easily-obtained, macroscopic parameters. Full-wave numerical simulations such as finite-difference time domain (FDTD) calculations are difficult for random MDCs due to the fact that the nanoscale geometry of a random composite is generally difficult to ascertain after fabrication. We have developed a fabrication method for creating semicontinuous metal films with arbitrary thicknesses and a modeling technique for such films using realistic geometries. We extended our two-dimensional simulation method to obtain realistic geometries of 3D …

Control System For Mass Spectrometer, Jian Xu

Purdue Polytechnic Masters Theses

Mass spectrometry (MS) is a very popular analytical methodology that measures the mass of ions using a mass spectrometer. It is widely used for determining masses of chemicals, the elemental composition of a sample and molecule structure. The process of mass spectrometry normally consists of ionizing chemical compounds to ions and measuring their ratios of mass to charge for analysis.

MS instruments consist of three modules: Ionization, Analysis and detection. A LabVIEW system was developed to control the three modules of a mass spectrometer, giving the required signals in a right sequence. Experiments can be carried out by using the …

Particle-Hole Asymmetry Of Fractional Quantum Hall States In The Second Landau Level Of A Two-Dimensional Hole System, A. Kumar, N. Samkharadze, Gabor A. Csathy, Michael J. Manfra, L. N. Pfeiffer, K. W. West

Birck and NCN Publications

We report the unambiguous observation of a fractional quantum Hall state in the Landau level of a two-dimensional-hole sample at the filling factor v = 8/3. We identified this state by a quantized Hall resistance and an activated temperature dependence of the longitudinal resistance and found an energy gap of 40 mK. Notably, the particle-hole conjugate state at filling factor v = 7/3 in our sample did not develop down to 6.9 mK. This observation is contrary to that in electron samples, in which the 7/3 state is typically more stable than the 8/3 state. We present evidence that the …

How Much Do U.S. University Students Know, And Want To Know, About Sustainability And Green Building? The Findings Of A Survey, And Possible Implications For General Elective Curricula., Jeremy R. Farner

Purdue Polytechnic Masters Theses

Using the survey approach, this investigation examined the attitudes and interest of college students at two universities in different geographic locations within the United States.  Approximately 24,000 students from all disciplines and majors at Weber State University (WSU) in Utah, and 4,000 at Purdue University in Indiana, were invited to participate in a study to determine current knowledge, familiarity, and interest in topics within the sustainability and Green Building educational arena. The goal of this study was to determine what students already know, would like to know, and how much interest there would be in developing …

Fiber Reinforced Polymer Bridge Decks, Rita E. Rodriguez-Vera, Nicolas J. Lombardi, Marcelo A.S. Machado, Judy Liu, Elisa D. Sotelino

JTRP Technical Reports

The overarching goal of this study was to perform a comprehensive evaluation of various issues related to the strength and serviceability of the FRP deck panels that are available in the industry. Specific objectives were to establish critical limit states to be considered in the design of FRP deck panel, to provide performance specifications to designers, and to develop evaluation techniques for the deck panels in service.

Two different FRP panels were studied during the research project: a sandwich panel and a pultruded panel. The sandwich panel was initially selected for the rehabilitation case study bridge. However, for a variety …

Statistical Analysis When The Data Is An Image: Eliciting Student Thinking About Sampling And Variability., Margaret A. Hjalmarson, Tamara J. Moore, Robert Delmas

School of Engineering Education Faculty Publications

Results of analysis of responses to a first-year undergraduate engineering activity are presented. Teams of students were asked to develop a procedure for quantifying the roughness of a surface at the nanoscale, which is typical of problems in Materials Engineering where qualities of a material need to be quantified. Thirty-five teams were selected from a large engineering course for analysis of their responses. The results indicate that engagement in the task naturally led teams to design a sampling plan, use or design measures of center and variability, and integrate those measures into a model to solve the stated problem. Team …

An Asset Management Framework For Addressing The New Mutcd Traffic Sign Retroreflectivity Standards, Eric Hulme, Sarah Ml Hubbard, Grant D. Farnsworth, Alexander M. Hainen, Steve M. Remias, Darcy M. Bullock

Indiana Local Technical Assistance Program (LTAP) Technical Reports

The 2009 Manual on Uniform Traffic Control Devices (MUTCD) requires that all agencies implement traffic sign management programs by January 8th, 2012. Most agencies are expected to adopt some type of systematic replacement policy based on life expectancy, augmented by visual inspection to identify signs with obvious damage. Several previous efforts have developed models based on average degradation of the retroreflective sheeting as the signs age. This paper develops a series of survival curves characterizing the percent of signs that pass the retroreflectivity standards for signs ranging from 0 to 20 years. The curves representing expected conformance with the retroreflectivity …

How Do Millennial Engineering And Technology Students Experience Learning Through Traditional Teaching Methods Employed In The University Setting?, Elizabeth A. Howard

Department of Computer Graphics Technology Degree Theses

The purpose of the study was to document and analyze how Millennial engineering and technology students experience learning in large lecture classrooms. To help achieve this purpose, perceptions Millennials have toward traditional teaching methods employed in large lecture classes were analyzed and discussed. Additionally, this study documented how Millennials experienced technology within large lecture classrooms. A learning model depicting how Millennials experience learning within the large lecture classroom was created based on the results of this study. This model employed three separate tools utilized within the large lecture classroom. These tools: Lecture, Technology, and Homework, work together to synthesize learning …

How Much Do U.S. University Students Know, And Want To Know, About Sustainability And Green Building? The Findings Of A Survey, And Possible Implications For General Elective Curriculum., Jeremy R. Farner

Purdue Polytechnic Masters Theses

Using the survey approach, this investigation examined the attitudes and interest of college students at two universities in different geographic locations within the United States.  Approximately 24,000 students from all disciplines and majors at Weber State University (WSU) in Utah, and 4,000 at Purdue University in Indiana, were invited to participate in a study to determine current knowledge, familiarity, and interest in topics within the sustainability and Green Building educational arena. The goal of this study was to determine what students already know, would like to know, and how much interest there would be in developing …

Atomistic Approach To Alloy Scattering In Si(1-X)Ge(X), Saumitra R. Mehrotra, Abhijeet Paul, Gerhard Klimeck

Birck and NCN Publications

SiGe alloy scattering is of significant importance with the introduction of strained layers and SiGe channels into complementary metal-oxide semiconductor technology. However, alloy scattering has till now been treated in an empirical fashion with a fitting parameter. We present a theoretical model within the atomistic tight-binding representation for treating alloy scattering in SiGe. This approach puts the scattering model on a solid atomistic footing with physical insights. The approach is shown to inherently capture the bulk alloy scattering potential parameters for both n-type and p-type
carriers and matches experimental mobility data.

Gpu-Based Global Illumination Using Lightcuts, Tong Zhang

Department of Computer Graphics Technology Degree Theses

Global Illumination aims to generate high quality images. But due to its high
requirements, it is usually quite slow. Research documented in this thesis was
intended to offer a hardware and software combined acceleration solution to
global illumination. The GPU (using CUDA) was the hardware part of the whole
method that applied parallelism to increase performance; the “Lightcuts”
algorithm proposed by Walter (2005) at SIGGRAPH 2005 acted as the software
method. As the results demonstrated in this thesis, this combined method offers
a satisfactory performance boost effect for relatively complex scenes.

A Cost-Benefit Analysis Of A Campus Computing Grid, Preston M. Smith

Purdue Polytechnic Masters Theses

Any major research institution has a substantial number of computer systems on its campus, often in the scale of tens of thousands. Given that a large amount of scientific computing is appropriate for execution in an opportunistic environment, a campus grid is an inexpensive way to build a powerful computational resource. What is missing, though, is a model for making an informed decision on the cost-effectives of a campus grid. In this thesis, the author describes a model for measuring the costs and benefits of building a campus computing resource based on the institution’s existing investment in computing hardware.

For …

Gis Based Pavement Maintenance: A Systematic Approach, Robert J. Kmetz

Purdue Polytechnic Directed Projects

Abstract

According to 2008 Federal Highway Administration (FHWA) statistics, there are 2,734,102 miles of paved public roads in the United Sates, with an additional 1,324,245 miles of unpaved public roads.  Road conditions deteriorate with time as the result of weather effects, deicing salts, and vehicle loads.  The most common pavement distress includes cracking, rutting, and potholes.  These pavement defects must be repaired to restore the pavement to a satisfactory service level for road users. According to the FHWA, in 2006 approximately $54.2 billion dollars was spent on maintenance and expansion, just on U.S. highways alone.

Routine maintenance is a cost …

First-Principles Analysis Of Zrn/Scn Metal/Semiconductor Superlattices For Thermoelectric Energy Conversion, Bivas Saha, Timothy D. Sands, Umesh V. Waghmare

Birck and NCN Publications

We present a first-principles density functional theory-based analysis of the electronic structure, vibrational spectra, and transport properties of ZrN/ScN metal/semiconductor superlattices aiming to understand its potential and suitability for thermoelectric applications. We demonstrate (a) the presence of Schottky barriers of 0.34 eV at the metal/semiconductor interface and (b) a large asymmetry in the electronic densities of states and flattening of electronic bands along the cross-plane directions near the Fermi energy of these superlattices, desirable for high Seebeck coefficient. The vibrational spectra of these superlattices show softening of transverse acoustic phonon modes along the growth direction and localization of ScN phonons …

Decomposition Of Unitary Matrices For Finding Quantum Circuits: Application To Molecular Hamiltonians, Anmer Daskin, Sabre Kais

Birck and NCN Publications

Constructing appropriate unitary matrix operators for new quantum algorithms and finding the minimum cost gate sequences for the implementation of these unitary operators is of fundamental importance in the field of quantum information and quantum computation. Evolution of quantum circuits faces two major challenges: complex and huge search space and the high costs of simulating quantum circuits on classical computers. Here, we use the group leaders optimization algorithm to decompose a given unitary matrix into a proper-minimum cost quantum gate sequence. We test the method on the known decompositions of Toffoli gate, the amplification step of the Grover search algorithm, …

Electric Motor & Power Source Selection For Small Aircraft Propulsion, Jeremy Fehrenbacher, David L. Stanley, Mary E. Johnson Dr., Jeffrey Honchell

Purdue Polytechnic Directed Projects

The research conducted in this project is on electrical propulsion in aviation. A Cessna 172K aircraft with a Lycoming O-320-E2D piston engine serves as a baseline measurement. Investigation of the components required for electrical flight is performed, and components are selected based on market availability and operational performance criteria.

This research focuses on electrical propulsion in the aviation industry, and is tailored to aircraft within the General Aviation sector leading to the following research question: Can current electric motor and battery technologies conceptually support flight operations for a Cessna 172K in terms of aircraft performance criteria?

The results explore the …

Mechatronics Application To Solar Tracking, Danny L. Rodriguez Jr

Purdue Polytechnic Directed Projects

The purpose of this was to design and implement a two-axis solar tracking system utilizing the National Instruments C-Rio real time controller. In order to accomplish this a prototype was modeled in CAD. This prototype used two 12 V DC motors to change a solar panel's rotation and tilt based on feedback data from three cadmium sulfide photoresistors. This configuration was chosen for its ability to create both a left-right rotational and an up/down tilt differential. In Addition this approach uses National Instruments Labview to control a solar tracking system. Using Labview add uniqueness to this project by adding a …

Bifurcation-Based Mass Sensing Using Piezoelectrically-Actuated Microcantilevers, Vijay Kumar, J. William Boley, Yushi Yang, Hendrik Ekowaluyo, Jacob K. Miller, George T.C. Chiu, Jeff F. Rhoads

Birck and NCN Publications

In conventional implementations, resonant chemical and biological sensors exploit chemomechanically-induced frequency shifts, which occur in linear systems, for analyte detection. In this letter, an alternative sensing approach, based upon dynamic transitions across saddle-node bifurcations is investigated. This technique not only has the potential to render improved sensor metrics but also to eliminate frequency tracking components from final device implementations. The present work details proof-of-concept experiments on bifurcation-based sensing, which were conducted using selectively functionalized, piezoelectrically-actuated microcantilevers. Preliminary results reveal the proposed sensing technique to be a viable alternative to existing resonant sensing methods. (C) 2011 American Institute of Physics. [doi:10.1063/1.3574920]

Quantitative Reappraisal Of The Helmholtz-Guyton Resonance Theory Of Frequency Tuning In The Cochlea, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Publications

To explore the fundamental biomechanics of sound frequency transduction in the cochlea, a two-dimensional analytical model of the basilar membrane was constructed from first principles. Quantitative analysis showed that axial forces along the membrane are negligible, condensing the problem to a set of ordered one-dimensional models in the radial dimension, for which all parameters can be specified from experimental data. Solutions of the radial models for asymmetrical boundary conditions produce realistic deformation patterns. The resulting second-order differential equations, based on the original concepts of Helmholtz and Guyton, and including viscoelastic restoring forces, predict a frequency map and amplitudes of deflections …

Single Molecule In Vivo Analysis Of Toll-Like Receptor 9 And Cpg Dna Interaction, Jiji Chen, Suman Nag, Pierre-Alexandre Vidi, Joseph Irudayaraj

Birck and NCN Publications

Toll-like receptor 9 (TLR9) activates the innate immune system in response to oligonucleotides rich in CpG whereas DNA lacking CpG could inhibit its activation. However, the mechanism of how TLR9 interacts with nucleic acid and becomes activated in live cells is not well understood. Here, we report on the successful implementation of single molecule tools, constituting fluorescence correlation/cross-correlation spectroscopy (FCS and FCCS) and photon count histogram (PCH) with fluorescence lifetime imaging (FLIM) to study the interaction of TLR9-GFP with Cy5 labeled oligonucleotide containing CpG or lacking CpG in live HEK 293 cells. Our findings show that i) TLR9 predominantly forms …

Full Dispersion Versus Debye Model Evaluation Of Lattice Thermal Conductivity With A Landauer Approach, Changwook Jeong, Supriyo Datta, Mark S. Lundstrom

Birck and NCN Publications

Using a full dispersion description of phonons, the thermal conductivities of bulk Si and Bi(2)Te(3) are evaluated using a Landauer approach and related to the conventional approach based on the Boltzmann transport equation. A procedure to extract a well-defined average phonon mean-free-path from the measured thermal conductivity and given phonon-dispersion is presented. The extracted mean-free-path has strong physical significance and differs greatly from simple estimates. The use of simplified dispersion models for phonons is discussed, and it is shown that two different Debye temperatures must be used to treat the specific heat and thermal conductivity (analogous to the two different …

Electronic Structure, Vibrational Spectrum, And Thermal Properties Of Yttrium Nitride: A First-Principles Study, Bivas Saha, Timothy D. Sands, Umesh V. Waghmare

Birck and NCN Publications

Yttrium nitride (YN) is a promising semiconductor for use in metal/semiconductor superlattices for thermoelectric applications. We determine its electronic structure, vibrational spectrum, and thermal properties using first-principles density functional theory (DFT) based simulations with a generalized gradient approximation (GGA) of the exchange correlation energy. We employ GGA+U and GW approximations in our calculations to (a) improve the accuracy of the calculation of bandgaps and (b) determine specific features of its electronic structure relevant to transport properties, such as transverse (m(t)*) and longitudinal (m(1)*) conduction band effective mass. To evaluate consequences of forming alloys of YN with other materials to its …

Performance Of Indiana’S Superpave Hma Mixtures, Ayesha Shah, Rebecca Mcdaniel

JTRP Technical Reports

This project followed the performance of a number of hot mix asphalt paving projects for seven to eight years in an attempt to relate laboratory test results to field performance. First, a small scale study compared sampling locations, specific gravity test procedures and compaction devices used on two samples from projects, one with volumetric acceptance and one with non-volumetric acceptance, to determine the best combination to use for Part 2 of the study. In Part 2, 12 projects constructed in 2001 and 2002 were sampled, tested and monitored. Laboratory testing involved determining maximum and bulk specific gravities, binder content, air …

An Atomistic Study Of Thermal Conductance Across A Metal-Graphene Nanoribbon Interface, Zhen Huang, Timothy S. Fisher, Jayathi Y. Murthy

Birck and NCN Publications

This paper presents an atomistic Green's function study of phonon transport through a heterogeneous interface between bulk TiC substrates and graphene nanoribbons (GNRs). The force constants that govern the lattice dynamical equations are obtained from first-principles density functional theory (DFT) calculations and then optimized for the Green's function formulation. Phonon vibrational properties of TiC and GNRs are investigated by lattice dynamics calculations with optimized force constants that correlate well to direct DFT results. Thermal conductances of TiC-GNR-TiC systems are studied together with TiC-GNR structures. The conductances of TiC-GNR interfaces are normalized by ribbon width and are found to converge. The …

Calculation Of Single Chain Cellulose Elasticity Using Fully Atomistic Modeling, Xiawa Wu, Robert Moon, Ashlie Martini

Birck and NCN Publications

Cellulose nanocrystals, a potential base material for green nanocomposites, are ordered bundles of cellulose chains. The properties of these chains have been studied for many years using atomic-scale modeling. However, model predictions are difficult to interpret because of the significant dependence of predicted properties on model details. The goal of this study is to begin to understand these dependencies. We focus on the investigation on model cellulose chains with different lengths and having both periodic and nonperiodic boundary conditions, and predict elasticity in the axial (chain) direction with three commonly used calculation methods. We find that chain length, boundary conditions, …