Engineering Commons^™

How Engineering Standards Are Interpreted And Translated For Middle School, Eugene Judson, John Ernzen, Stephen Krause, James A. Middleton, Robert J. Culbertson

Journal of Pre-College Engineering Education Research (J-PEER)

In this exploratory study we examined the alignment of Next Generation Science Standards (NGSS) middle school engineering design standards with lesson ideas from middle school teachers, science education faculty, and engineering faculty (4–6 members per group). Respondents were prompted to provide plain language interpretations of two middle school Engineering Design performance expectations and to provide examples of how the performance expectations could be applied in middle school classrooms. Participants indicated the challenges and benefits of implementing these performance expectations and indicated personal experiences that helped them to interpret the performance expectations.

Quality of lessons differed depending on the performance expectation …

Quantitative Risk Evaluation Of Obstacle Limitation Surfaces For Final Approaches At Airports, Amila Silva, Alexandre G. De Barros

Journal of Aviation Technology and Engineering

Obstacle limitation surfaces (OLS) are the main safeguard against objects that can pose a hazard to aircraft operations at and around airports. The standard dimensions of the most of those surfaces were estimated using the pilot’s experience at the time when they were included in the standard documents. As a result, some of these standards may have been overestimated, while others may not provide an adequate level of safety. With airports moving to the Safety Management System (SMS) approach to design and operations safety, proper evaluation of the level of safety provided by OLS at specific sites becomes important to …

Estimation Of Performance Airspeeds For High-Bypass Turbofans Equipped Transport-Category Airplanes, Nihad E. Daidzic

Journal of Aviation Technology and Engineering

Conventional Mach-independent subsonic drag polar does not replicate the real airplane drag characteristics exactly and especially not in the drag-divergence region due to shock-induced transonic wave drag. High-bypass turbofan thrust is a complicated function of many parameters that eludes accurate predictions for the entire operating envelope and must be experimentally verified. Fuel laws are also complicated functions of many parameters which make optimization and economic analysis difficult and uncertain in the conceptual design phase. Nevertheless, mathematical models and predictions have its important place in aircraft development, design, and optimization. In this work, airspeed-dependent turbofan thrust and the new fuel-law model …

Probability Model Of Corrosion-Induced Cracking Time In Chloride-Contaminated Reinforced Concrete, Chunhua Lu, Jinmu Yang, Ronggui Liu

International Conference on Durability of Concrete Structures

Corrosion-induced concrete cover cracking caused by chloride ion is an important indication of durability limit state for marine reinforced concrete (RC) structures and can ultimately determine the structural service life. In this paper, considering the random nature of factors affecting the corrosion cracking process, a probabilistic model which expands on the deterministic model of cover cracking time is developed by using Monte Carlo simulation technique. The results showed that the time to corrosion cracking can be modelled by the Weibull distribution. Finally, the probabilistic analysis for the cracking time is applied to an in-site RC bridge girder with four different …

Progress Of Carbonation In Chloride Contaminated Concretes, Yaocheng Wang, P. A.M. Basheer, S. Nanukuttan, Y. Bai

International Conference on Durability of Concrete Structures

Concretes used in marine environment are generally under the cyclic effect of CO₂ and chloride ions (Cl^-). To date, the influence of carbonation on ingress of chloride ions in concretes has been widely studied; in comparison, study on the influence of Cl^- on the progress of carbonation is limited. During the study, concretes were exposed to independent and combined mechanisms of carbonation and chloride ingress regimes. Profiles of apparent pH and chloride concentration were used to indicate the progress of carbonation and ingress of Cl^- in concretes. From the apparent pH profile, a carbonation front …

Carbon Fiber As Anode Material For Cathodic Prevention In Cementitious Materials, Emma Qingnan Zhang, Luping Tang, Thomas Zack

International Conference on Durability of Concrete Structures

Cathodic prevention (CPre) technique is a promising method and has been used for the past two decades to prevent steel from corrosion in concrete structures. However, wide application of this technique has been restricted due to high costs of anode materials. In order to lower the cost and further improve this technique, carbon fiber composite anode has been introduced as an alternative anode material with affordable price and other outstanding properties. This paper presents the study of using carbon fiber mesh as anode material for long-term cathodic prevention system and the effect of accelerated current on macro- and microstructure of …

Investigation Of A Novel 3d Non-Destructive Evaluation For Corrosion Process In Reinforced Concrete, Guohao Fang, Biqin Dong, Ningxu Han, Feng Xing

International Conference on Durability of Concrete Structures

X-ray computed microtomography (X-ray μCT) method is proposed to trace the corrosion features of steel bar in cementitious materials. Three-dimensional corrosion morphology (including morphology of steel corrosion, corrosion products and cracks formation) are characterized and reconstructed. Experimental results demonstrate that X-ray μCT can track time-dependent development of corrosion products and the subsequent initiation and propagation of corrosion-induced cracks. In addition, scanning electron microscope (SEM) and energy dispersive spectrometer (EDS) are used to morphologically and chemically analyze the corrosion result. The microscopic analysis result is found to be in a very good agreement with the image analysis measured by X-ray μCT. …

An Experimental Study On Effect Of Steel Corrosion On The Bond–Slip Performance Of Reinforced Concrete, Xiaolin Zhang, Xuebing Liang, Hancheng Huang, Haijun Zhou

International Conference on Durability of Concrete Structures

This paper studied the effects of reinforcement corrosion on bond performance between rebar and concrete. Tests were carried out to evaluate the degradation of bond between reinforcing steel and concrete for different corrosion levels of reinforcing steel. A series of 20 specimens of different concrete strength with various reinforcing steel corrosion levels were designed and manufactured. Each specimen was casted as a 200-mm concrete cube, and a steel rebar was centrally embedded with two stirrups around it. The steel rebar were corroded using an electrochemical accelerated corrosion technique. The corrosion crack opening width and length were recorded after the corrosion …

Threshold Chloride Concentration Of Stainless Steels In Simulated Concrete Pore Solution, Hailong Wang, Jiayan Ling, Xiaoyan Sun

International Conference on Durability of Concrete Structures

To evaluate whether stainless steel can replace carbon steel as rebar in reinforced concrete structures exposed to aggressive environment, the threshold chloride concentration of carbon steel, austenitic and duplex stainless steels were experimentally studied in this paper. The solutions with pH ranging from 9.5 to 13.6 were used herein to simulate the pore liquids in both alkaline and carbonated concretes. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) tests were carried out in the solutions with chloride concentration ranging from 0 to 5.0M and at a temperature around 25°C. The activation of pitting corrosion was determined when corrosion current increased and …

Corrosion-Induced Concrete Cracking Model Considering Corrosion-Filled Paste, Jianfeng Dong, Yuxi Zhao, Yingyao Wu, Weiliang Jin

International Conference on Durability of Concrete Structures

A T_CP–T_CL model is established to describe the relationship between the thickness of the corrosion-filled paste (CP) and that of the corrosion layer (CL). This model can describe the phenomenon that the corrosion filling in the concrete pores and accumulating at the steel/concrete interface occur synchronously. Based on the T_CP–T_CL model, a corrosion-induced concrete cracking model, which can quantitatively consider corrosion-filled paste at concrete/steel interface, is proposed. Combined with damage analysis in corrosion-induced cracking process of concrete cover, the model is developed to describe the quantity of steel corrosion required to crack …

The Compressive Strength Of Cement–Slag–Calcium Sulphoaluminate Ternary System, Hu Shi, Jun Wang, Zhuqing Yu, Xiaodong Shen

International Conference on Durability of Concrete Structures

At present, there is an increasing interest on the use of calcium sulphoaluminate (C₄A₃$) in cement. In this paper, pure mineral of sulphoaluminate (C₄A₃$) was prepared in laboratory. Different dosages of steel slag and C₄A₃$ were blended into cement. The aim of this paper is to investigate the compressive strength of this ternary system. The test results show that the addition of C₄A₃$ can improve the strength of cement. Larger C₄A₃$ dosage (7%) may reduce the 28 days strength. The …

Potential For Alkali–Silica Reaction In Radiation Shielding Concrete Containing Special Aggregates, Daria Jóźwiak-Niedźwiedzka, Michał A. Glinicki, Karolina Gibas

International Conference on Durability of Concrete Structures

In the present study, the potential for the alkali–silica reaction (ASR) in radiation shielding concrete containing special aggregates is presented. The tests were performed on two kinds of aggregate: (1) high-density aggregate to absorb the gamma radiation (barite, magnetite, and hematite) and (2) mineral with high bound water content to attenuate the neutron flux (serpentinite). The optical microscopy in transparent light on thin sections, XRD and XRF method, was used to assess the mineral composition of aggregates. ASTM C1260 test method for potential alkali reactivity of aggregates was applied also to investigate the effect of different content and crystal size …

Effect Of Superabsorbent Polymers (Sap) On Fresh State Mortars With Ground Granulated Blast-Furnace Slag (Ggbs), Fernando Do Couto Rosa Almeida, Agnieszka Joanna Klemm

International Conference on Durability of Concrete Structures

Although cementitious materials are the main construction materials and worldwide produced, there is still a major concern about their sustainability and durability, especially in terms of conserving resources, reducing wastes, and decreasing the environmental impacts of repair and replacement. In general, cementitious materials are very susceptible to cracking provoked by autogenous shrinkage due to their associated self-desiccation process. The problem is even more critical in concrete with blended cements, including Portland cement with ground granulated blast-furnace slag (GGBS). The current paper evaluates efficiency of superabsorbent polymers (SAP) as internal curing agents; shrinkage reduction in mortars with different levels of cement …

Designing Repeatable Self-Healing Into Cementitious Materials, Mo Li, Shuai Fan

International Conference on Durability of Concrete Structures

Designing self-healing into cementitious materials can open a new world of opportunities for resilient concrete infrastructure under service loading conditions. The self-healing process should be robust as well as repeatable, allowing for self-repair after multiple damage events. The repeatability poses great challenges when self-healing strategies mainly rely on the formation of low-strength calcium carbonate healing product, complicated by the localized cracking behavior of cementitious materials. This study aims at formulating a new cementitious material system with designed physical and chemical characteristics that favour repeatable self-healing. Advanced experimental methods, coupled with micromechanics theory, are adopted to probe and design repeatable self-healing …

Progress In Durability Study Of Frp Materials, Zeng-Zhu Zhu, Ying-Wu Zhou, Li-Li Sui, Feng Xing, Jia Du

International Conference on Durability of Concrete Structures

During the past decades, FRP strengthened RC structures have attracted worldwide interest in both application and research. Nowadays, as more and more infrastructures are being suffered from severe corrosions due to harsh and extreme environments, the durability of FRP strengthened RC structures has generally emerged as the most important issue in research. Thus, the paper presents the latest progress in durability study of the FRP materials through an in-depth review and analysis on existing extensive investigations. The time-dependent performances of two types of FRP materials of carbon FRP (CFRP) and glass FRP (GFRP) under severe environments of humidity, high temperature, …

Durability-Based Optimal Design Methodology For Rc Members In Corrosive Environment, Saeid A. Alghamdi, Shamsad Ahmad, Adamu Lawan

International Conference on Durability of Concrete Structures

No abstract provided.

Investigation Of The Spatial Variability Of Steel Weight Loss And Corrosion Cracking: A Novel X-Ray Technique, Sopokhem Lim, Haitao Jiang, Mitsuyoshi Akiyama

International Conference on Durability of Concrete Structures

The performance of corrosion-affected RC members depends strongly on localized damages of reinforcement. Therefore, modeling the spatial variability of steel corrosion is very important for the assessment of the remaining service life of corroded structures or time for maintenance. To study the changes of spatial variability of steel weight loss over time, a continuous monitoring is necessary. In this paper, a novel procedure of X-ray technique application in monitoring the spatial growth of a corroded bar in a RC specimen is demonstrated along with the digital image processing of X-ray images to estimate the steel weight loss. The relationship of …

Influence Of Concrete Moisture Condition On Half-Cell Potential Measurement, Sylvia Kessler, Christoph Gehlen

International Conference on Durability of Concrete Structures

The detection of on-going corrosion is one of the main issues during inspection of reinforced concrete structures. The half-cell potential measurement method is the most common and established non-destructive technique to support this task. But a lot of infrastructures are exposed to rain or seawater, which can cause heterogeneous moisture condition within one component. In turn, this can have influence on the potential mapping results, and as a consequence, the interpretability of the half-cell potential measurement is impaired. This paper focuses on the influence of concrete moisture condition on half-cell potential measurement. Laboratory and practical tests’ results are analyzed qualitatively …

Electrical Response Of Mortar Saturated With Nacl Solutions Under Freeze–Thaw Cycles, Yi Wang, Fuyuan Gong, Tamon Ueda, Dawei Zhang

International Conference on Durability of Concrete Structures

This paper presents the test results of electrical response of mortar saturated with sodium chloride (NaCl) solutions under freeze–thaw cycles (FTCs). To quantitatively evaluate the salt frost damage of mortar based on its electrical response, mesoscale samples are prepared to assure the uniform pore solution concentration. The reduction of electrical resistivity shows the same tendency with elastic modulus, but with less degree. The investigation shows that electrical resistivity of mortar decreases with temperature and the phase changes can be observed based on their relationship. The freezing and thawing points decreasing with increment of solution concentration can be found, but their …

Basic Examination On Assessing Mechanical Properties Of Concrete That Has Suffered Combined Deterioration From Fatigue And Frost Damage, Hiroshi Hayashida, Yasuhiko Sato, Tamon Ueda

International Conference on Durability of Concrete Structures

An examination including an evaluation of mechanical properties of concrete that had suffered combined deterioration from fatigue and frost damage was done using cylindrical specimens. The order of deterioration and degree of deterioration of the specimens were used as variables. The examination clarified that certain mechanical properties of concrete that had undergone combined deterioration were able to be evaluated by measuring the propagation speed of ultrasonic waves. The decrease in the elastic modulus and the ultrasonic velocity that accompanies the increase in the number of freeze–thaw cycles was smaller in the specimens that experienced fatigue first and then frost damage …

The Effect Of Nano-Sio2 Dispersed Methods On Mechanical Properties Of Cement Mortar, Mingle Liu, Zonghui Zhou, Xiuzhi Zhang, Xiangzi Yang, Xin Cheng

International Conference on Durability of Concrete Structures

Nano-SiO₂ is added to the cement by using different dispersion methods, through the macroscopic mechanical properties to characterize its dispersion in the cement, it can be used to explore the best experimental process. The results show that the compressive strength of cement samples with different dispersion methods is different. When the physical dispersion method is used, the intensity is not improved, but the ultrasonic dispersion method is the smallest, and the dispersion of nano-SiO₂ is -9.11%. When the surfactant is used as dispersant, the dispersion of nano-SiO₂ by Naphthalene water reducer is the best, and the compressive …

Effect Of Nano-Sio2 Content On The Setting Time And Mechanical Properties Of Tricalcium Silicate, Zhenhai Xu, Zonghui Zhou, Xin Cheng

International Conference on Durability of Concrete Structures

Using analytically pure calcium carbonate and silica as raw materials, high purity tricalcium silicate (C₃S) is prepared by solid-state reaction. The tricalcium silicate was sintered at a temperature of 1550°C with the heat preservation time of 6 h. The final sample needs three times of calcination circles. Ultrasonic cleaning machine was used to disperse the water and different amount of nano-SiO₂ (0, 1, 2, and 3 wt%) for 5 min, then mixed with C₃S, and formed into standard blocks. The setting time and compressive strength of each age (1, 3, 7, and 28 days) was …

Effects Of Nano-Caco3 On The Properties Of Cement Paste: Hardening Process And Shrinkage At Different Humidity Levels, Yamei Cai, Pengkun Hou, Zonghui Zhou, Xin Cheng

International Conference on Durability of Concrete Structures

The hardening process and volume stability of cement pastes with and without nano-CaCO₃ (NC) were studied through investigations on the setting time and shrinkage. Results showed that NC shortened the setting time of cement paste: the initial setting time decreased by 3.9 and 11.1% when 1 and 3% NC were added, and the finial setting times were shortened by 6.2 and 15.2%, respectively. The shrinkage of cement paste was compensated by NC, and the effect was more obvious as more NC was added into the cement paste. Although the shrinkage decreased at the lower relative humidity, the degree of …

Effect Of Bfrp Grid On Crack Propagation Of Reinforced Concrete Beam With Thick-Cover Concrete, Li-Juan Cheng, Hua-Nan He

International Conference on Durability of Concrete Structures

For the purpose of solving the problem of large crack width in concrete beam with thick cover, BFRP grid is added to the concrete cover to control the crack development and to improve the distribution status of cracks. In this paper, the bending tests under four-point loading are adopted to investigate cracking properties of reinforced concrete beams with thick cover, in which BFRP grid is added. During test cracking load, crack width and the number of crack were recorded, which will be analysed later. Test results show that crack development of reinforced concrete beam with thick cover can be effectively …

Effect Of Pet Wrapping On Shear Performance Of Corroded Reinforced Concrete Columns, Dawei Zhang, Yuxi Zhao, Weiliang Jin, Tamon Ueda

International Conference on Durability of Concrete Structures

In this paper, an experimental study is presented on the influence of PET warping on shear performance, such as diagonal shear cracking load, peak load, and energy dissipation of RC columns with stirrup corrosion before strengthening. The experimental program involved an electrochemical process to accelerate the migration of chlorides from an external electrolyte into the tested columns, a wetting–drying cycle process with a controlled current to speed up the corrosion of the stirrup in the tested columns, the strengthening of corroded columns with PET warping, and a pseudostatic test to determine the shear capacity of the tested beams. The shear …

Effect Of Cured Time On Creep Of Lightweight Aggregate Concrete, Hongzhi Cui, Haibin Yang, Xiaoxiao Xu, Zitao Lin, Tommy Yiu Lo

International Conference on Durability of Concrete Structures

Creep and shrinkage are such properties that will occur in concrete when they are under load and exposed to surrounding. Since this property will cause deformation which may decrease the design strength of the concrete, it is necessary to do have more knowledge on this phenomenon. So, we will study the effect of creep on 7 and 14 days of cured time of specimens which sealed or unsealed will be considered, respectively. The specimens have shown how the concrete strains when they are under sustained load with time. Besides, the sealed specimens have shown how the basic creep is different …

Application Of Raman Spectroscopy For Tracing The Status Of Silica Fume In Cementitious Materials, Yanfei Yue, Yun Bai, Jing Jing Wang

International Conference on Durability of Concrete Structures

Silica fume (SF) is an important component for manufacturing high performance concrete (HPC), owing to its superb pozzolanic reactivity and physical filling effects. However, application of SF in concrete may cause potential hazards issues. Although using SF in slurry form can somehow reduce the potential biotoxicity, the long-term stability and status of the SF particles within cementitious materials is still uncertain. In the current study, attempts were made to use Raman spectroscopy as an innovative alternative technique for tracing and identifying the status of SF both in its original SF slurry and in a 6-month-old hydrated cement paste. Light-optical microscope …

Delayed Ettringite Formation In Fly Ash Concrete Under Moist Curing Conditions, Zhuqing Yu, Jian Ma, Hu Shi, Xiaodong Shen, Guang Ye

International Conference on Durability of Concrete Structures

During the hydration of cement, tricalcium aluminate (C₃A) reacts with gypsum and forms ettringite (AFt). Once all gypsum is consumed, ettringite can further react with remaining C₃A and form monosulfate (AFm) at 1–2 days. Normally, at early ages, ettringite all transfers to AFm phase. After several months or years, ettringite can form again if a new source of sulfate becomes available in the pore solution of the paste, viz. delayed ettringite formation. In previous study, it was found that delayed ettringite forms in Portland cement concrete when the concrete samples were cured under moist conditions, …

Study On The Disposition Of Water In Fly Ash-Based Geopolymers Using Atr–Ir, Jian Liu, Yuan Fang, Obada Kayali

International Conference on Durability of Concrete Structures

This paper addresses the question of whether the main product of low calcium fly ash-based geopolymer is a hydrate, namely, sodium aluminosilicate hydrate (N-A-S-H). The answer to this question is important for understanding geopolymer characteristics. One of these is its fire resistance. In this study, fly ash-based geopolymers were synthesized using the combination of Na₂CO₃ and Ca(OH)₂. Samples were cured at ambient temperature for 7 days, then placed in the oven at 105°C for 24 h, and then calcined at 1050°C for 48 h. IR was used to examine the produced geopolymers at each stage …

Micromechanical Modeling For Material Design Of Durable Infrastructural Materials: The Influence Of Aggregate And Matrix Modification On Elastic Behavior Of Mortars, Sumanta Das, Amit Maroli, Narayanan Neithalath

International Conference on Durability of Concrete Structures

This paper reports the fundamental difference in microstress distributions in traditional hardened cement paste with quartz inclusions and a cement paste with lightweight aggregate (LWA) inclusions using microstructurebased numerical simulation involving finite element method with periodic boundary conditions. Variation of relative stress distributions under varying component material properties and varying microstructural features in both the systems is elucidated for a comprehensive understanding. The presented microstructure-based numerical technique accurately captures the stress concentrations inside microheterogeneous systems, which is otherwise not detectible using analytical homogenization schemes. Numerical simulations reveal that strengthening and stiffening of matrix and interfacial transition zone (ITZ) with silica …