Engineering Commons^™

Damage Tracking In Laboratory Reinforced Concrete Bridge Columns Under Reverse-Cyclic Loading Using Fusion-Based Imaging, Sina Mehdinia, A K M Golam Murtuz, Thomas Schumacher, Peter Dusicka

Civil and Environmental Engineering Faculty Publications and Presentations

Fusion-based imaging using ground-penetrating radar (GPR) and ultrasonic echo array (UEA) was employed to track damage progression in the columns of two full-scale reinforced concrete (RC) bridge column-footing subassembly laboratory specimens. The specimens had different lap-splice detailing and were subjected to reverse-cyclic lateral loading simulating a subduction zone earthquake. GPR and UEA scans were performed on the east and west faces of the columns at select ductility levels. Reconstructed images were obtained using the extended total focusing method (XTFM) and fused using a wavelet-based technique. Composite images of each column's interior were created by merging the images from both sides. …

Self-Assembly Of Exfoliated Graphene Flakes As Anticorrosive Coatings For Additive Manufactured Steels, Kaleb Hood, Wen Qian, Savannah Krupa, Annie Dao, Sarah Ahmed, Samuel Olson, Jun Jiao, Multiple Additional Authors

Mechanical and Materials Engineering Faculty Publications and Presentations

This study demonstrates the feasibility of using liquid exfoliation of expandable graphite into multilayer exfoliated graphene flakes (EGFs) to form a self-assembled thin film on an air–water interface. The film can coat the surface of additive manufactured (AM) steel substrates to enhance surface properties, specifically AM 316 stainless-steel (AM316), AM 8620 steel (AM8620), and samples of the same alloys made by conventional manufacturing (CM) processes. Liquid exfoliation offers a high yield route for an EGF coating that can cover up to 95% of the sample surface with a single application. The thin, flexible EGFs can coat a rough AM metal …

Direct Spectroscopic Observation Of Cross-Plane Heat Transfer In A Two-Dimensional Van Der Waals Heterostructure, Du Chen, Matthieu Fortin-Deschênes, Yuchen Lou, Huiju Lee, Kenji Watanabe, Takaaki Taniguchi, Fengnian Xia, Peijun Guo, Multiple Additional Authors

Mechanical and Materials Engineering Faculty Publications and Presentations

Two-dimensional (2D) transition metal chalcogenides (TMDs) have drawn significant attention in recent years due to their extraordinary optical and electronic properties. As heat transfer plays an important role in device performance, various methods such as optothermal Raman spectroscopy and time-domain thermoreflectance have been developed to measure the thermal conductivity and interfacial thermal conductance in 2D van der Waals (vdW) heterostructures. Here, we employ the vibrational-pump-visible-probe (VPVP) spectroscopy to directly visualize the heat transfer process in a heterostructure of multilayer h-BN and monolayer WS2. Following an impulsive vibrational excitation of h-BN in the mid-infrared, we probe the heat transfer …

Flow Development And Entrainment In Turbulent Particle-Laden Jets, Laura K. Shannon, Bianca Viggiano, Raúl Bayoán Cal, L. G. Mastin, Alexa R. Van Eaton, Stephen Solovitz

Mechanical and Materials Engineering Faculty Publications and Presentations

Explosive eruptions expel volcanic gases and particles at high pressures and velocities. Within this multiphase fluid, small ash particles affect the flow dynamics, impacting mixing, entrainment, turbulence, and aggregation. To examine the role of turbulent particle behavior, we conducted an analogue experiment using a particle-laden jet. We used compressed air as the carrier fluid, considering turbulent conditions at Reynolds numbers from approximately 5,000 to 20,000. Two different particles were examined: 14-μm diameter solid nickel spheres and 13-μm diameter hollow glass spheres. These resulted in Stokes numbers between 1 and 35 based on the convective scale. The particle mass percentage in …

A Unified Understanding Of Minimum Lattice Thermal Conductivity, Yi Xia, Dale Gaines, Jiangang He, Koushik Pal, Zhi Li, Mercouri G. Kanatzidis, Vidvuds Ozolinš, Chris Wolverton

Mechanical and Materials Engineering Faculty Publications and Presentations

We propose a first-principles model of minimum lattice thermal conductivity based on a unified theoretical treatment of thermal transport in crystals and glasses.

A Novel Deep Learning, Camera, And Sensorbased System For Enforcing Hand Hygiene Compliance In Healthcare Facilities, Samyak Shrimali, Christof Teuscher

Electrical and Computer Engineering Faculty Publications and Presentations

Hospital-acquired infections are a major cause of death worldwide, and poor hand hygiene compliance is a primary reason for their spread. This paper proposes an artificial intelligence, microcontroller, and sensor-based system that monitors and improves staff hand hygiene compliance at various critical points in a hospital. The system uses a Convolutional Neural Network (CNN) to detect and track if staff have followed the WHO hand rub/hand wash guidelines at alcohol dispensers, hospital sinks, and patient beds. The system also uses RFID tags, vibration motors, LEDs, and a central server to identify staff, alert them of their cleaning requirements, monitor their …

The Networked Nitrous Node: A Low-Power Field-Deployable Cots-Based N2o Gas Sensor Platform, Ronaldo Leon, Wenyu Bi, Eyal Eynis, Travis Johnson, Wei Yan, David C. Burnett, John M. Acken

Electrical and Computer Engineering Faculty Publications and Presentations

We present a wireless nitrous oxide (N 2 O) gas sensor system consisting of a commercial high-current infrared N 2 O sensor wrapped in a “smart” sensor framework to make it suitable for battery-powered deployment. This framework consists of wireless mesh networking, data storage, additional environmental sensors, and a gas sensor power control circuit managed by a central microcontroller. The N 2 O sensor is the first order consumer of power and sampling N 2 O at approximately ten minute intervals yields an estimated system lifetime of 63 days when using four 18650 Li-ion batteries. The node stores data locally …

A Pwm Method For Reducing Dv/Dt And Switching Losses In Two-Stage Power Converters, Mahima Gupta, Abhijeet Prem

Electrical and Computer Engineering Faculty Publications and Presentations

Today's semiconductor devices are accompanied by high switching frequencies (> kilo-hertz) and small transition times (< micro-seconds). Such fast transition times are accompanied by undesirable effects such as voltage overshoots at the load terminals, ground leakage currents, wide-band electromagnetic noise, etc. With the advent of wide band-gap devices, several applications are moving towards higher switching frequency operation with at-least an order of magnitude reduction in transition times. While these characteristics are considered necessary to break the next-generation barriers in power density, efficiency and applicability, the undesirable effects due to faster transitions are expected to present obstacles. This work proposes a PWM approach to modify the shape of the switching voltages to overcome the disadvantages of the fast transition times without any increase in switching losses. In fact, several of the switching transitions feature ZVS operation, resulting in reduced switching losses. The paper discusses the analytical details of the approach using a simple DC-DC boost-buck converter and extends it to a DC to three-phase AC converter using the principles of space vector modulation. The paper presents detailed simulation and comparative results in terms of voltage over-shoots over long cables, loss calculations and electromagnetic noise. Results from a laboratory-scale working prototype confirm the benefits of the proposed approach in terms of EMI and loss reduction.

When Less Is More: How Increasing The Complexity Of Machine Learning Strategies For Geothermal Energy Assessments May Not Lead Toward Better Estimates, Stanley P. Mordensky, John Lipor, Jacob Deangelo, Erick R. Burns, Cary R. Lindsey

Electrical and Computer Engineering Faculty Publications and Presentations

Previous moderate- and high-temperature geothermal resource assessments of the western United States utilized data-driven methods and expert decisions to estimate resource favorability. Although expert decisions can add confidence to the modeling process by ensuring reasonable models are employed, expert decisions also introduce human and, thereby, model bias. This bias can present a source of error that reduces the predictive performance of the models and confidence in the resulting resource estimates.

Our study aims to develop robust data-driven methods with the goals of reducing bias and improving predictive ability. We present and compare nine favorability maps for geothermal resources in the …

Global Water Level Variability Observed After The Hunga Tonga-Hunga Ha’Apai Volcanic Tsunami Of 2022, Adam Thomas Devlin, David A. Jay, Stefan Talke, Jiayi Pan

Civil and Environmental Engineering Faculty Publications and Presentations

The eruption of the Hunga Tonga-Hunga Ha'apai volcano on 15 January 2022 provided a rare opportunity to understand global tsunami impacts of explosive volcanism and to evaluate future hazards, including dangers from “volcanic meteotsunamis” (VMTs) induced by the atmospheric shock waves that followed the eruption. The propagation of the volcanic and marine tsunamis was analyzed using globally distributed 1 min measurements of air pressure and water level (WL) (from both tide gauges and deep-water buoys). The marine tsunami propagated primarily throughout the Pacific, reaching nearly 2 m at some locations, though most Pacific locations recorded maximums lower than 1 m. …

Experimental Evaluations Of The Impact Of An Additive Oxidizing Electronic Air Cleaner On Particles And Gases, Yicheng Zeng, Aurélie Laguerre, Elliott T. Gall, Mohammad Heidarinejad, Brent Stephens

Mechanical and Materials Engineering Faculty Publications and Presentations

Electronic air cleaning (EAC) technologies have garnered significant attention for use in buildings. Many EAC technologies rely on the addition of reactive constituents to indoor air to react with gas-phase compounds, enhance particle deposition, and/or inactivate microorganisms. However, limited data are available on the efficacy of many EAC technologies and their potential to form chemical byproducts during operation. Here we experimentally evaluate the indoor air quality impacts, specifically targeting particles and gases but not microbial constituents, of a commercially available additive oxidizing EAC that generates positive and negative ions and hydrogen peroxide (H2O2). Tests were conducted in a large unoccupied …

Bodyslam: Feasibility Of Tracking Human Kinematics With Simultaneous Localization And Mapping (Slam), Sepehr Laal

Dissertations and Theses

We evaluated a new wearable technology that fuses inertial sensors and cameras for tracking human kinematics. These devices use on-board simultaneous localization and mapping (SLAM) algorithms to localize the camera within the environment. Significance of this technology is in its potential to overcome many of the limitations of the other dominant technologies. Our results demonstrate this system often attains an estimated orientation error of less than 1° and a position error of less than 4cm as compared to a robotic arm. This demonstrates that SLAM's accuracy is adequate for many practical applications for tracking human kinematics.

Advanced Industrial Lubricants And Future Development Trends Of Tribo-Systems For Tribological Performance Evaluation, George Totten, Simon C. Tung, Undrakh Mishigdorzhiyn

Mechanical and Materials Engineering Faculty Publications and Presentations

It is possible to solve challenges in the global automotive and manufacturing industries by using a multidisciplinary approach to advanced industrial lubricants, their tribological performance evaluation, and new surface engineering techniques for prospective tribosystems. Three types of approaches are reported in this Special Issue (SI): (1) Advance surface engineering technologies and protective coatings [1–4]; (2) Multipurpose lubricants with nano-additives for better performance [5–8]; (3) Oil degradation simulation thermo-oxidative ageing and dynamic degradation processes [9–12].

Cyclic Behavior Of Transitional Fine-Grained Soils In Northern Willamette Valley, Frank Jarman

Civil and Environmental Engineering Master's Project Reports

As discussed within studies from Idriss and Boulanger (2008) and Bray and Sancio (2006), the undrained cyclic shear behavior of low-plasticity fine-grained soils will transition between liquefaction (sand-like behavior) to cyclic softening (clay-like behavior) over a narrow range of plasticity index (PI). Despite not being sufficiently understood, the cyclic behavior of low plasticity silts has become an increasingly important field of study due to the significant impact it has on ground deformations and infrastructure failure in areas that are seismically active. Laboratory tests were performed on soils by third party consultants on a site located in the northern Willamette Valley, …

Liquefaction Triggering In Low-Plasticity Silts And Effects Of Liquefaction-Induced Lateral Spreading On A Reinforced-Concrete Pile, Jared A. Martinez

Civil and Environmental Engineering Master's Project Reports

Liquefaction triggering and post-liquefaction effects on lateral loading of deep foundations is an emerging area of study. This project presents: the results of cyclic direct simple shear (CDSS) testing on a low-plasticity alluvial silt collected in Portland, Oregon; and analysis of the combined effects of liquefaction-induced lateral spreading on a reinforced-concrete pile using data collected from a shake table test. The former research determines the liquefaction susceptibility and post-liquefaction characteristics of a local transitional soil using stress-controlled CDSS testing, the latter explores the complex lateral loading a reinforced-concrete pile undergoes during seismic loading with liquefaction-induced lateral spreading of the ground …

Ce-Qual-W2 Performance Assessment Modeling 1979 Grh Flume Study, Logan Negherbon

Civil and Environmental Engineering Master's Project Reports

In an early review of numerical reservoir hydrodynamic models, the US Army Corps of Engineers developed a physical model at the US Army Waterways Experiment Station to assess the performance of modeling cold water underflow with numerous 2-dimensional and 3-dimensional numerical hydrodynamic models. Within this effort, the precursor for CE-QUAL-W2, the Laterally Averaged Reservoir Model, was defined and applied with limited success in representing the vertical velocity profile and outflow temperatures series collected from the physical model in the General Reservoir Hydrodynamics flume. CE-QUAL-W2 has since been modified from this early form in numerous ways including incorporation of higher order …

Data From: Warming Of The Columbia River, 1853 To 2018, Malia Hanae Scott, Stefan Talke, David Jay, Heida Diefenderfer

Civil and Environmental Engineering Faculty Datasets

Water temperature is a critical ecological indicator; however, few studies have statistically modeled century-scale trends in riverine or estuarine water temperature, or their cause. Here, we recover, digitize, and analyze archival temperature measurements from the 1850s onward to investigate how and why water temperatures in the lower Columbia River are changing. To infill data gaps and explore changes, we develop regression models of daily historical Columbia River water temperature using time-lagged river flow and air temperature as the independent variables. Models were developed for 3 time periods (mid-19 th , mid-20 th , and early 21 st century), using archival …

Warming Of The Columbia River, 1853 To 2018, Malia Hanae Scott, Stefan Talke, David Jay, Heida Diefenderfer

Civil and Environmental Engineering Faculty Publications and Presentations

Water temperature is a critical ecological indicator; however, few studies have statistically modeled century-scale trends in riverine or estuarine water temperature, or their cause. Here, we recover, digitize, and analyze archival temperature measurements from the 1850s onward to investigate how and why water temperatures in the lower Columbia River are changing. To infill data gaps and explore changes, we develop regression models of daily historical Columbia River water temperature using time-lagged river flow and air temperature as the independent variables. Models were developed for 3 time periods (mid-19 th , mid-20 th , and early 21 st century), using archival …

Detecting Fast Frequency Events In Power System: Development And Comparison Of Two Methods, Hussain A. Alghamdi, Midrar Adham, Umar Farooq, Robert B. Bass

Electrical and Computer Engineering Faculty Publications and Presentations

In power systems, frequency deviation from nominal value can occur due to reasons such as loss of generation, loss of load, or major faults in the grid. Such frequency fluctuations can lead to serious subsequent outages and damages to both end-user and utility equipment. Therefore, a proper frequency deviation detection methodology must be in place to effectively identify frequency events in a timely manner. This manuscript provides a comparative analysis between two frequency deviation detection algorithms. One is based on signal processing and statistical analysis. The other is a regression-based algorithm. Both of these algorithms have multiple adjustable parameters, making …

Droplet Capture In A Fiber Array, Karl Cardin, Christophe Josserand, Raúl Bayoán Cal

Mechanical and Materials Engineering Faculty Publications and Presentations

Droplets interacting with fiber arrays is ubiquitous in nature, textiles, microelectromechanical devices, and fog harvesting. The phenomena of droplet impact on an equidistant array of fibers is experimentally investigated. Drop tower tests are performed to characterize the droplet dynamics in the absence of the effects of gravity which could deform fibers and bias equilibrium configurations. Results show that contact line dissipation is largely responsible for arresting the droplet. Additionally, the penetration length is affected by fiber flexibility. A model is developed predicting the droplet penetration dynamics which shows good agreement with experiments.

Trust Model System For The Energy Grid Of Things Network Communications, Narmada Sonali Fernando, Zhongkai Zheng, John M. Acken, Robert B. Bass

Electrical and Computer Engineering Faculty Publications and Presentations

Network communication is crucial in the Energy Grid of Things (EGoT). Without a network connection, the energy grid becomes just a power grid where the energy resources are available to the customer uni-directionally. A mechanism to analyze and optimize the energy usage of the grid can only happen through a medium, a communications network, that enables information exchange between the grid participants and the service provider. Security implementers of EGoT network communication take extraordinary measures to ensure the safety of the energy grid, a critical infrastructure, as well as the safety and privacy of the grid participants. With the dynamic …

Evolution Of Eddy Viscosity In The Wake Of A Wind Turbine, Luis Martínez-Tossas, Juliaan Bossuyt, Nicholas Hamilton, Raul Bayoan Cal

Mechanical and Materials Engineering Faculty Publications and Presentations

The eddy viscosity hypothesis is a popular method in wind turbine wake modeling for estimating turbulent Reynolds stresses. We document the downstream evolution of eddy viscosity in the wake of a wind turbine from experimental and large-eddy-simulation data.Wake eddy viscosity is isolated from its surroundings by subtracting the inflow profile, and the driving forces are identified in each wake region. Eddy viscosity varies in response to changes in turbine geometry and nacelle misalignment with larger turbines generating stronger velocity gradients and shear stresses. We propose a model for eddy viscosity based on a Rayleigh distribution. Model parameters are obtained from …

Realization Of Multi-Valued Logic Using Optical Quantum Computing, Sophie Choe

Dissertations and Theses

Quantum computing is a paradigm of computing using physical systems, which operate according to quantum mechanical principles. Since 2017, functioning quantum processing units with limited capabilities are available on the cloud. There are two models of quantum computing in the literature: discrete variable and continuous variable models. The discrete variable model is an extension of the binary logic of digital computing with quantum bits |0⟩ and |1⟩ . In the continuous variable model, the quantum state space is infinite-dimensional and the quantum state is expressed with an infinite number of basis elements.

In the physical implementation of quantum computing, however, …

Pcl And Dmso2 Composites For Bio-Scaffold Materials, Jae-Won Jang, Kyung-Eun Min, Cheolhee Kim, Chien Wern, Sung Yi

Mechanical and Materials Engineering Faculty Publications and Presentations

Polycaprolactone (PCL) has been one of the most popular biomaterials in tissue engineering due to its relatively low melting temperature, excellent thermal stability, and cost-effectiveness. However, its low cell attraction, low elastic modulus, and long-term degradation time have limited its application in a wide range of scaffold studies. Dimethyl sulfone (DMSO2) is a stable and non-hazardous organosulfur compound with low viscosity and high surface tension. PCL and DMSO2 composites may overcome the limitations of PCL as a biomaterial and tailor the properties of biocomposites. In this study, PCL and DMSO2 composites were investigated as a new bio-scaffold material to increase …

Design And Analysis Of High Performance Magnetic Gears For Magnetomechanical Thrusters, Ho Yin Wong

Dissertations and Theses

This dissertation is devoted to investigating the performance potential of coaxial radial flux modulating magnetic gears for use in propulsive thruster applications. The research has focused on studying magnetic gear designs suitable for use in electric aircraft drivetrains and electric boat thrusters. Consequent pole, flux concentration and Halbach rotor magnetic gear typologies have been analyzed and compared with respect to their torque density performance for the first time. It is shown that the Halbach rotor magnetic gear holds the greatest potential with respect to achieving volumetric and mass torque densities parity with an equivalent mechanical gear.

A high volumetric torque …

Uncertainty Quantification And Fragility Development Of Deteriorating Rc Bridge Piers, Ayush Bhandari

Dissertations and Theses

Corrosion can reduce structural capacity and increase the risk of bridge damage/failure under extreme events. The impact of corrosion on seismic fragility of bridges has been well studied. However, the methodology used in most existing studies requires detailed information on the structural design and condition of a bridge, which is a major hindrance in conducting seismic risk assessment for a large population of bridges. Furthermore, existing studies do not adequately address the time-dependency of uncertainties associated with fragility curve development. This study presents a methodology to generate time-dependent seismic fragility curves for deteriorating highway bridges based only on the limited …

Surface Roughness Prediction In End Milling Processes Considering The Vibration Of The Cutting Tool, Yubin Lee

Dissertations and Theses

Purpose: Machining is a manufacturing process for making the desired design with dimensional tolerance and surface roughness. Despite the development of engineering technology, predicting machined surface roughness is still challenging since there are various factors, such as material properties, tool material properties, the rigidity of the machine tool, and the use of coolant. In particular, tool vibration is the most critical factor since it makes it challenging to obtain the desired quality of the machined product by unintentionally making a tool move. Therefore, surface finish was explored in this study, considering cutting tool vibration under various axial depth-of-cuts and feed …

Design And Optimization With Quantum And Memristor Platforms, Yiwei Li

Dissertations and Theses

The complexity and diversity of modern computing challenges have made it difficult for traditional computers to efficiently handle tasks such as computer-aided design, design optimization, and combinatorial problems within a reasonable time frame. In applications such as bitcoin mining and robotic control, power consumption and circuit size are critical factors. To overcome these limitations, this dissertation examines alternative computing technologies such as quantum computers and hybrid memristive circuits. The research demonstrates that these technologies hold the potential to offer more efficient and effective solutions for particular problems, whether in terms of faster computation or reduced power consumption.

Quantum Algorithm For Mining Frequent Patterns For Association Rule Mining, Abdirahman Alasow, Marek Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

Maximum frequent pattern generation from a large database of transactions and items for association rule mining is an important research topic in data mining. Association rule mining aims to discover interesting correlations, frequent patterns, associations, or causal structures between items hidden in a large database. By exploiting quantum computing, we propose an efficient quantum search algorithm design to discover the maximum frequent patterns. We modified Grover’s search algorithm so that a subspace of arbitrary symmetric states is used instead of the whole search space. We presented a novel quantum oracle design that employs a quantum counter to count the maximum …

Crack Detection In An Aluminium Oxide Grinding Wheel By Impact Hammer Tests, Yubin Lee, David Turcic, Dan Danks, Chien Wern

Mechanical and Materials Engineering Faculty Publications and Presentations

Grinding is widely used as the last step of the manufacturing process when a good surface finish and precise dimensional tolerances are required. However, if the grinding wheels have cracks, they may lead to a hazardous working environment and produce poor tolerance in machined products. Therefore, grinding wheels should be inspected for cracks before being mounted onto the machine. In this study, a novel method of finding possible internal cracks in the aluminium oxide grinding wheel will be explored by examining the natural frequency and displacement of wheels using an impact hammer testing method. Grinding wheels were cracked into two …