Engineering Commons^™

The Effect Of Nanoclays On The Properties Of Aspirin Modified Enteric Polymer Prepared By Hot-Melt Mixing, Nonjaros Chomcharn

Dissertations

Melt mixing in batch equipment or continuous extruders is a technique that recently gained the attention of the pharmaceutical industry. This dissertation investigates two controlled-release drug delivery systems. The first system, namely the enteric matrix, contains an active pharmaceutical ingredient (API) and plasticizer in an enteric polymer while in the second system a nanoclay is added to the enteric matrix, to produce a polymer nanocomposite. The first system employs hot-melt mixing to prepare a modified enteric matrix, as a delayed-release dosage form. Different concentrations of aspirin (ASP) ranging from 10 – 30% w/w are melt-mixed with a plasticized Eudragit® …

High Performance Digital Signal Processing: Theory, Design, And Applications In Finance, Mustafa Ugur Torun

Dissertations

The way scientific research and business is conducted has drastically changed over the last decade. Big data and data-intensive scientific discovery are two terms that have been coined recently. They describe the tremendous amounts of noisy data, created extremely rapidly by various sensing devices and methods that need to be explored for information inference. Researchers and practitioners who can obtain meaningful information out of big data in the shortest time gain a competitive advantage. Hence, there is more need than ever for a variety of high performance computational tools for scientific and business analytics. Interest in developing efficient data processing …

Influence Of Sinx/Si Interface States On Si Solar Cells, Santosh Sahoo

Dissertations

Impact of the SiN_x/n⁺-Si interface on silicon solar cell performance was investigated, where SiN_x is used as a passivation layer. Significant shifts in capacitance, conductance and leakage current characteristics were observed for metal/SiN:H/n⁺-Si MOS capacitor when it was subjected to a constant voltage stress (CVS) of +10V at room temperature. The interface trap density (D_it) across the SiN:H/n⁺-Si interface increased from 6.3 x 10⁹ to 7.5 x 10⁹ cm^-2 eV^-1 after a 500-second stress whereas the n⁺/p junction diode remained unaffected by the …

Hosx: Hospital Operations Excellence Model, Shivon S. Boodhoo

Dissertations

Hospital performance can be evaluated in four categories: (i) quality of care, (ii) process of care (iii) financial and (iv) operations productivity. Of these, ‘quality of care’ is the most widely reported and studied measure of performance, and focuses primarily on the clinical outcomes of the patient. In contrast, operations productivity and efficiency is the least studied measure, and currently there is limited ability to evaluate how efficiently the hospital has used its resources to deliver healthcare services. Cost containment in the healthcare industry is a challenging problem, and there is a lack of models and methods to benchmark hospital …

Synthesis And Characterization Of Novel Boron-Based Nanostructures And Composites, Rajen B. Patel

Dissertations

A number of nanomaterials have been synthesized by using a method that has been previously utilized to make pure boron nanostructures through the addition of different reactant gases to the process. This method was pioneered by Iqbal-Liu and will be referred to as the IL method in this dissertation. The IL method successfully created boron nanowires, boron nanoflakes, and boron nanotubes. In this dissertation, by adding methane, hydrogen sulfide, and ammonia to the process, an entire family of nanomaterials is prepared. These include nanowires, nano-heterostructures, and thin nanoplatelets of a variety of elemental compositions. These materials can be integrated with …

Reaction Mechanisms Of Hydrocarbon And Mercury Systems In The Atmosphere And In Combustion: A Theoretical Study Of Thermochemical And Kinetic Properties, Itsaso Auzmendi Murua

Dissertations

The continuing increase in the world population and the rapidly changing lifestyle and education of this population projects significant increases in energy requirements. Global warming is a worldwide major concern with a very serious potential stress on our climate threatening major changes to the environment. It is, without question, of major importance to improve the efficiency and optimize the current available combustion processes and fuel sources, to develop alternative fuels and to reduce the emissions of toxic pollutants.

The objective of this dissertation is to present thermochemical, kinetic and modeling results on two reference fuels (the land vehicle fuel isooctane …

The Effects Of Rapid Stretch Injury On Rat Neocortical Cultures, George Constandinos Magou

Dissertations

Several key biological mechanisms of traumatic injury to axons have been elucidated using in vitro stretch injury models. These models, however, are based on the experimentation of single cultures keeping productivity slow. Indeed, low yield has hindered important and well founded investigations requiring high throughput methods such as proteomic analyses. To meet this need, a multi-well high throughput injury device is engineered to accelerate and accommodate the next generation of traumatic brain injury research. This modular system stretch-injures neuronal cultures in either a 24-well culture plate format or six individual wells simultaneously. Custom software control allows the user to accurately …

Foaming Of Amorphous Drug Delivery Systems Prepared By Hot Melt Mixing And Extrusion, Graciela Terife

Dissertations

Currently there is considerable interest from both academe and pharmaceutical industry in exploring foaming processes and their products in drug delivery applications. However, there is still little knowledge of the impact of the morphology of the foamed structures on the performance of drug products in spite of some publications in this area. Therefore, the main objective of this dissertation is to gain a fundamental understanding of the correlation between foam morphology and performance of amorphous drug delivery systems, which are comprised of an Active Pharmaceutical Ingredient (API) and Polymer excipient.

The Hot Melt Extrusion (HME) process is used to compound …

Metal Based Reactive Nanocomposites Prepared By Cryomilling, Shasha Zhang

Dissertations

Aluminum is one of the most commonly used metal fuel additives for propellants, explosives, and pyrotechnics. Recent interest has been focused on replacements for aluminum as fuel additives to achieve higher combustion temperatures and stronger pressure pulses for applications in advanced munitions systems. Two applications are addressed in this work. In the applications for explosives designed to defeat stockpiles of chemical and biological weapons, it is of interest to develop multifunctional materials combining the high energy density of metal fuels with the biocidal activity of halogens. A challenge of this effort is to design and prepare powder-like Al-I2 materials which …

End-To-End Network Measurement For Wired And Wireless Networks, Khondaker Musfakus Salehin

Dissertations

A number of Internet applications require accurate characterization of different network parameters. There is, therefore, a need to determine whether the networks that carry packets for those applications comply with the requirements. Network measurement provides the means to perform this determination. This work focuses on schemes for measuring several parameters both in wired and wireless environments.

The need of measuring packet processing time (PPT) of the end hosts (i.e., workstations) in a wired network is unveiled. PPT is defined as the time elapsed between the arrival of a packet at the data-link layer and the time when the packet is …

Production Of Stable Bcs Class Ii Drug Suspensions By Melt Emulsification And Subsequent Incorporation Into Polymer Strip Films, Emanuel Joseph Vizzotti

Theses

One of the ways to improve the dissolution rate of poorly water-soluble drugs is to produce fine drug particles with increased surface area. This increase will lead to bioavailability enhancement. However, smaller drug particles are thermodynamically unstable and tend to aggregate or grow. Therefore, proper formulation and process parameters must be chosen to keep the particles small. In this study, fine drug particles of two model drugs, fenofibrate and ibuprofen, are prepared by the melt emulsification technique. The influence of suspension formulation (i.e., the inclusion of polymers and surface-active agents) on particle stability is investigated. Moreover, different agitation techniques during …

Power Dissipation And Mixing Time In A Partially Filled Pharmaceutical Reactor Equipped With A Retreat-Blade Impeller At Different Fill Ratios, Aniruddha Banerjee

Theses

Glass-lined, stirred reactors and tanks are of significant industrial importance, especially in the pharmaceutical and fine chemical industries. These reactors are manufactured with a “glass-lining,” i.e., a glass layer applied to the agitator, the inside of the reactor/tank and to any of the surfaces in contact with its contents in order to maximize corrosion resistance, facilitate reactor cleaning, and minimize product contamination. Because of glass-lining fabrication issues, a retreat blade impeller with a low impeller clearance off the tank bottom is commonly used in glass-lined reactors. In addition, since wall baffles cannot be easily mounted on the wall of glass-lining …

Heterogeneous Combustion Of Condensed Particles In Transition Regime, Deniz Yildiz

Theses

A steady-state model of heterogeneous combustion for a spherical particle is developed accounting for the transition regime of heat and mass transfer. The model assumes formation of condensed products and reaction rate controlled by the transport of oxidizer to the particle surface. The model is based on the Fuchs’ limiting sphere approach. Calculations are performed for combustion of zirconium particles of different sizes. Temperature and oxygen concentration profiles are calculated and compared to those predicted by the continuous medium transfer model. It is shown that for particles in the range from 100 nm up to 30 gm heat and mass …

Nir Light Transmission Through Skin And Muscle, Deniz Ozgulbas

Theses

Light has been used extensively in the medical field for both therapeutic and diagnostic applications. Tissue optical window or therapeutic window defines the range of wavelengths where the light has the maximum transmittance through tissue. In this range, absorption and scattering effects are relatively lower when compared to the visible or middle infrared wavelengths. Knowledge of the transmittance through tissue can help determine the effective light intensities in medical applications.

The objective of this thesis is to determine the NIR light transmission through different thicknesses of animal tissue and its spatial spread due to the scattering effect. Primarily pork skin …

Model Predictive Control For Building Temperature Regulation, Weiqiang Dong

Theses

With the rapid increase in human consumption of energy, global warming is becoming an urgent problem. According to the past research, a significant part of greenhouse gas release and electricity consumption has been connected to buildings. Heating systems are the major contributor to high energy consumption of buildings. Better methods for decreasing energy consumption of buildings should be proposed and applied.

Model predictive control is widely used in building temperature regulation. Each model predictive control has its advantage. Through the comparison of several methods, this thesis discusses their respective features. The combination of a Matlab-based modeling system CVX and model …

Methane Partial Oxidation Over Phthalocyanine Catalyst, Yuan Zhu

Theses

The partial oxidation reaction of methane over a zeolite-supported ruthenium phthalocyanine catalyst is studied in a packed bed reactor. The investigation of such reaction is desirable because partial oxidation of methane yields a synthesis gas that can be upgraded to liquid chemicals and fuels.

Reactants of this study are He-diluted CH₄ and O₂. The effluent includes unreacted CH₄ and O₂, He, CO, CO₂, H₂, and H₂O vapor. Thermal conductivity gas chromatography is applied to identify the mole fractions of reactants and products. System pressure is maintained at 50 …

Hollow Fiber Membrane-Based Air Gap Membrane Distillation, Xuan Wang

Theses

Membrane Distillation (MD) is a thermally-driven separation process. In this research, desalination of 1 % NaCl solution is achieved by one type of MD namely, Air Gap Membrane Distillation (AGMD). The characteristics of AGMD are evaluated by using a hollow-fiber-set-based compact device. Hot brine solution and cold water are passed through two different fiber sets separately: porous hydrophobic polyvinylidene fluoride hollow fibers of the E type (PVDF E) and solid polypropylene (PP) hollow fibers. Vapor from the hot brine crosses the membrane pores of the PVDF fibers and the air gap, and finally condenses over the surface of solid hollow …

Batch Foaming Of Hot Melt Extruded Excipient/Disintegrant/Api Pharmaceutical Formulations And The Study Of The Effects Of The Resulting Cellular Structures On Api Dissolution, Na Yao

Theses

This thesis focuses on the impact of a disintegrant included in a foamed immediate release system composed of a polymer excipient and an Active Pharmaceutical Ingredient (API). Indomethacin (INM) is used as model API; Eudragit® EPO (EPO) is used as polymer excipient; AcDiSol and Crospovidone (Cros) are used as two kinds of disintegrant. The main objectives are to gain an understanding of the resulting morphologies, as well as the impact of disintegrants on drug release from foamed polymeric matrices.

In the first part of this research, the Hot Melt Extrusion (HME) process is used to compound the following pharmaceutical formulations: …

Measurement Of Gas Flow Through Porous Structures Using Thz Spectroscopy, Yihui Wang

Theses

Comparing THz transmission through a sample with the transmission through free-space allows one to calculate the THz absorbance of a sample. Previous studies have focused on using THz absorbance to measure the diffusion of liquid through materials. In this study, the ability of THz spectroscopy to measure the flow of gas in a porous material, packaging foam, is investigated. Specifically, Terahertz spectroscopy from 0.5 to 0.7 THz is used to measure the THz absorption of 1, 1 -difluoroethane. Several experiments are performed to test the ability of THz spectroscopy to measure the flow of gas in a porous material: (1) …

Finite Element Modeling Of Temperature Elevation Due To Nir Exposure In Neural Tissue, Atabek Can Yucel

Theses

Near infrared (NIR) lasers have been used in various types of medical applications. Heating is one of the most important concerns in the neural tissue when illuminated with NIR light. Rodent models are frequently used to study laser-tissue interactions. As a part of ongoing research project in the neural interface laboratory, direct measurements of temperature in the rat brain cortex as a response to a pulsed sequence of NIR laser beam are available. In this thesis, finite element modeling approach is used to model and simulate the temperature elevation in neural tissue under the effect of NIR laser pulsing. Steady …

Effect Of Scan Time On Resting State Parameters, Dhruti Patel

Theses

In the past decade the interest in studying the spontaneous low-frequency fluctuations (LFF) in a resting-state brain has steadily grown. By measuring LFF (< 0.08 Hz) in blood-oxygen-level-dependent (BOLD) signals, resting-state functional magnetic resonance imaging (rs-fMRI) has proven to be a powerful tool in exploring brain network connectivity and functionality. Rs-fMRI data can be used to organize the brain into resting state networks (RSNs). In this thesis, rs-fMRI data are used to determine the minimum data acquisition time necessary to detect local intrinsic brain activity as a function of both the amplitude of low frequency fluctuations (ALFF) and the fractional amplitude of low frequency fluctuations (fALFF) in BOLD signals in healthy subjects. The data are obtained from 22 healthy subjects to use as a baseline for future rs-fMRI analysis. Voxel-wise analysis is performed on the whole brain, gray matter volume, and two previously established RSNs: the default mode network (DMN) and the visual system network, for all the subjects in this study.

Pearson’s correlation coefficients (r-values) are calculated from each subject. The entire time series for one subject is divided into 31 subsections and the r-values are calculated between each consecutive subsection in a subject. In total, there are 30 r- values. To better understand what the results mean across subjects and within subjects Fisher transformations are applied to the 30 calculated r-values for each subject to get a normal z-distribution. The mean across 22 subjects’ z-values is …

Brain Computer Interface Based Neurorehabilitation Technique Using A Commercially Available Eeg Headset, Abhineet Mishra

Theses

Neurorehabilitation has recently been augmented with the use of virtual reality and rehabilitation robotics. In many systems, some known volitional control must exist in order to synchronize the user intended movement with the therapeutic virtual or robotic movement. Brain Computer Interface (BCI) aims to open up a new rehabilitation option for clinical population having no residual movement due to disease or injury to the central or peripheral nervous system. Brain activity contains a wide variety of electrical signals which can be acquired using many invasive and non-invasive acquisition techniques and holds the potential to be used as an input to …

Hydrodynamic Effects Of A Cannula In A Usp Dissolution Testing Apparatus 2, Qianqian Liu

Theses

Dissolution testing is routinely used in the pharmaceutical industry to provide in vitro drug release information for drug development and quality control purposes. The USP Testing Apparatus 2 is the most common dissolution testing system for solid dosage forms. Usually, sampling cannulas are used to take samples manually from the dissolution medium. However, the inserted cannula can alter the normal fluid flow within the vessel and produce different dissolution testing results.

The hydrodynamic effects introduced by a permanently inserted cannula in a USP Dissolution Testing Apparatus 2 were evaluated by two approaches. Firstly, the dissolution tests were conducted with two …

Research On Mppt Methods For Photovoltaic System Based On Microgrid, Jingchu Ji

Theses

This thesis introduces some basic concepts about a microgrid. Then it discusses the structure of photovoltaic system (PVS) which contains a solar panel and simplified PV models. Next, it discusses and compares different methods for Maximum Power Point Tracking (MPPT) with PVS. It presents three types of DC-DC converters -- Buck, Boost and Buck-Boost converter. This work proposes to apply a DC-DC converter of Buck-Boost type to make PVS controllable because this type of converter has the largest range for operational region so that it can get the best result on MPPT. Finally, this thesis presents a kind of new …

Effects Of Api Particle Size On The Dissolution Rate In Molten Polymer Excipient Matrices During Hot Melt Extrusion, Conducted In A Co-Rotating Twin-Screw Extruder, Meng Li

Theses

The effect of the Active Pharmaceutical Ingredient (API) particle size on the dissolution rate in the polymer excipient during hot melt extrusion is investigated using a co-rotating twin-screw extruder with three different screw configurations. Acetaminophen (APAP) and amphiphilic polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (PVCap-PVAc-PEG) (Soluplus) are chosen as the model API and water- soluble polymer excipient, respectively. APAP is milled using a fluid energy mill (FEM) into two different particle sizes. The thermal properties of processed samples are characterized by TGA and DSC. SEM and optical microscopy are also used in the morphological studies. Under quiescent conditions, API particles …

Engineering Spores To Display G Protein-Coupled Receptors For Directed Evolution, Alyssa Misoo Kim

Theses

All human cells are surrounded by a plasma membrane made from a phospholipid bilayer, which is responsible for maintaining a biologically active species, while stopping entry of deleterious substances from the outside. G protein-coupled receptors (GPCRs) are the membrane proteins, which transmit signals across the cell membrane. GPCRs are involved in almost every physiological process, and irregular control leads to pathological conditions. Therefore, they are major drug targets. Crystal structure determination is required to understand the molecular details of activation/deactivation. However, GPCRs are difficult to crystallize because of stability issues. An efficient protein engineering system needs to be developed. The …

Admittance Control Of The Intelligent Assist Robot Manipulator For People With Duchenne Muscular Dystrophy, Madeline Corrigan

Theses

Duchenne muscular dystrophy (DMD), a neuromuscular disease with a prevalence of 1 in 3500 male births, results in characteristic muscle weakness which is progressive with age and leads to loss of independence. And, in this population, maintaining optimal quality of life depends on the preservation of self-sufficiency. Despite the loss of function, non-ambulant people with DMD retain some muscle strength, just not sufficient strength to overcome the force of gravity. There are a number of upper-limb passive and active orthotic devices that attempt to augment the loss of upper limb function in people with DMD by taking advantage of this …

Study Of Poly (L-Lactic Acid)/Poly (D-Lactic Acid) Stereocomplex As Nucleating Agent For Poly (L- Lactic Acid) Crystallization, Yuan Lao

Theses

Poly (lactic acid) (PLA) is a biodegradable polymer with good renewability and processability. However, it has some drawbacks. The Poly (lactic acid) (PLA) stereocomplex formed via the interaction between optical isomers Poly (L-lactic acid) (PLLA) and Poly (D-lactic acid) (PDLA), provides improvements on PLA thermomechanical properties. To investigate the nucleating effect brought by the PLA stereocomplex, samples of PLLA blended with different content of PDLA are prepared by the solution casting method. With different cooling rates (5, 15, 25 °C/min), DSC non-isothermal crystallization experiments are performed. The results suggest that in the presence of the stereocomplex, the PLLA crystallization temperatures …

Role Of Materials & Design On Performance Of Baseball Bats, Kim Benson-Worth

Theses

Baseball bat safety has become an increasing area of interest with more than 19 million people in the United States alone participating in this sport. An increase in injuries resulting from bat injuries has brought the performance of the bats into question. A review of several studies focusing on the effects of the material properties of various baseball bats designs were examined. From this review it is evident that player and spectator safety greatly rely on proper baseball bat design. There was a 30% reduction in the Multi-Piece Failures (MPF) of wooden bats once the requirement of a Slope of …

Detection Of Video Frame Insertion Based On Constraint Of Human Visual Perception, Lu Zheng

Theses

Recently, due to availability of inexpensive and easily-operable multimedia tools, digital multimedia technology has experienced drastic advancements. At the same time, video forgery becomes much easier and makes more difficult to validate the video content. Consequently, the origin and integrity of video can no longer be taken for granted. A methodology is developed that is capable of detecting the video frame insertion based on the constraint of human visual perception. The main idea is based on the so-called differential sensitivity. That is, that the variation of brightness of neighboring video frames has some constraint. First, the video sequence is partitioned …