Engineering Commons^™

Structural Health Monitoring Of Bridges Using Wireless Sensor Networks, Seyed Behrad Ghazi Sharyatpanahi

Theses

Structural Health Monitoring, damage detection and localization of bridges using Wireless Sensor Networks (WSN) are studied in this thesis. The continuous monitoring of bridges to detect damage is a very useful tools for preventing unnecessary costly and emergent maintenance. The optimal design aims to maximize the lifetime of the system, the accuracy of the sensed data, and the system reliability, and to minimize the system cost and complexity

Finite Element Analysis (FEA) is carried out using LUSAS Bridge Plus software to determine sensor locations and measurement types and effectively minimize the number of sensors, data for transmission, and volume of …

Development Of A Finite Element Method For Light Activated Polymers, Craig Hamel

Theses

Traditional Shape Memory Polymers (SMPs) belong to a class of smart materials which have shown promise for a wide range of applications. They are characterized by their ability to maintain a temporary deformed shape and return to an original parent permanent shape. The first SMPs developed responded to changes in temperature by exploiting the difference in modulus and chain mobility through the glass transition temperature. However, in recent years, new SMPs have been developed that respond to other stimuli besides temperature; these can include electricity, magnetism, changes in chemical concentration, and even light.

In this thesis, we consider the photo-mechanical …

Simulation Of Electronic And Optical Properties Of Graphene, Biao Leng

Theses

Graphene is a recently discovered two-dimensional crystal. Due to its excellent electronic properties, transport properties, optical properties, and many other features, it has tremendous potential for applications in many areas. This thesis discusses the structure and properties of graphene using several different models of graphene and carries out detailed theoretical studies and calculations of its electronic and optical properties. Using two modules of Materials Studio, CASTAP and Doml3, four graphene models have been constructed. Their electronic and optical properties have also been calculated via these two modules. By comparing the results of calculations with experimental results and the literature, the …

Differentiation Of Mouse Embryonic Stem Cells Into Insulin-Producing Cells: Optimization To Enhance The Overall Differentiation Efficiency, Xiaotang Ma

Theses

Embryonic stem cells have the potential to differentiate into multiple cell types including insulin-producing cells (IPCs), which is becoming one of the promising cell sources for treating type 1 diabetes mellitus. However, in order to achieve functional stem cell-derived cells, it is important to generate more mature IPCs and to keep long-term viability post differentiation process. In this study, we varied several factors including different embryonic body culture conditions, digested cells seeding density and various coatings required for differentiation to optimize a previously established protocol to enhance the overall differentiation efficiency. Moreover, a three-dimensional in vitro collagen tissue culture system …

Thermal Properties Of Graphene, Vishal Vijay Nakhate

Theses

The two-dimensional (2D) monolayer structure of carbon atoms were initially considered as unstable. The 2D materials have recently been discovered and many researchers have started analyzing these materials. Graphene, a two-dimensional allotrope of graphite with sp2 bonded carbon atoms, is arranged in honeycomb structure. Graphene has excellent thermal conductivity and can be considered as a potential material for applications in the electronics industry where heating of materials is a serious concern.

In this study, thermal properties of p and n doped graphene nanosheets and nanoribbons are studied as function of percentage composition of the dopants and the direction of dissipation …

Tendon Reflex Protocol For Exploring The Mechanisms Associated With Whole Body Vibration, Ikechukwu Okeke

Theses

Whole body vibration (WBV) machines have in recent years been widely used as rehabilitation equipment. Whole body vibration has been shown to have positive effects on muscle response. Cerebral palsy (CP) is a neurodevelopmental condition that includes a group of non-progressive, but often changing, motor impairment syndromes arising in the early stages of human development. The aim of this project was to design a protocol and related instruments to assess the tendon reflex in response to WBV. Both a press pedal used for measuring the force exerted by the foot and a hammer used for measuring the stimulating force were …

Behavior Of Deformed Dermal Fibroblasts Seeded On A Silicon Membrane Under High Levels Of Strain, Laura Osorno

Theses

The main objective of this thesis is to understand, from a molecular perspective, the morphological and functional abnormalities of human dermal fibroblasts as a response to deformation produced by a normal force that can lead to the potential formation of stretch marks in pregnant women, adolescents, and people with Cushing's syndrome. The main function of dermal fibroblasts is to produce the essential fibrous components of the extracellular matrix (ECM) of the skin.

In order to study the mechanism of stretch mark formation, neonatal human dermal fibroblasts were seeded on a silicon membrane for controlled deformation. Upon reaching a confluence of …

Review Of Steganalysis Of Digital Images, Xinlei Pan

Theses

Steganography is the science and art of embedding hidden messages into cover multimedia such as text, image, audio and video. Steganalysis is the counterpart of steganography, which wants to identify if there is data hidden inside a digital medium. In this study, some specific steganographic schemes such as HUGO and LSB are studied and the steganalytic schemes developed to steganalyze the hidden message are studied. Furthermore, some new approaches such as deep learning and game theory, which have seldom been utilized in steganalysis before, are studied. In the rest of thesis study some steganalytic schemes using textural features including the …

Processing And Characterization Of Graphene And Graphene On Silicon, Cheng Peng

Theses

Graphene has become a promising material for applications in many areas including electronic devices, batteries and space crafts. Although it has a bright future, the commercial production of graphene has not yet been realized. In this thesis, an overview of the properties and applications of graphene is presented. The early research of preparing graphene and its composites is summarized, which gives the basis to synthesize graphene and improve the process. In this study, graphene oxide (GO) and graphene have been successfully made using graphite; graphene layer has been coated on the surface of a silicon wafer. The resulting specimens are …

Design, Construction And Characterization Ofa Magnetic Augmented Rotation System (Mars) Based Wind Turbine, Da Li

Theses

Magnetic Augmented Rotation System (MARS) works by magnetic field coupling, to transfer torque from the driver to the rotor without contact. This characteristic has significant applications to the wind turbine but research in combination of MARS and wind turbine has not been done in the literature. In this thesis, a small-scale wind turbine is designed, built and characterized in a prototype wind tunnel. The test results are analyzed and computer-aided software simulation is used as an auxiliary method to understand the mechanism of MARS. The power coefficient of this new wind turbine is estimated to be about 40%. The “gear …

Optical Properties Of Black Silicon - An Analysis, Suramya Sekhri

Theses

Silicon is the preeminent solar cell material of the day because it is the first semiconductor that was learned to commercialize and continues to be the principal semiconducting material used in photovoltaic technology for the manufacture of solar cells. Silicon, an indirect band gap semiconducting material, has a reflectance of about 30% in the visible range of wavelengths. Standard Silicon solar cells are not entirely useful in the infrared spectrum region. In order to enhance the performance of Silicon solar cells, reflectance losses must be minimized and absorption must be maximized. In the solar cell industry, anti-reflection (AR) coating is …

Experimental Determination Of The Agitation Requirements For Solids Suspension In Dissolution Systems Using A Mini Paddle Apparatus, Yang Song

Theses

Dissolution testing is a critical step in quality control of manufactured final products in the pharmaceutical industry. The United State Pharmacopeia (USP) Dissolution Testing Apparatus 2 (paddle) is the most widely used dissolution test devices in the pharmaceutical industry to formulate solid drug dosage forms and to develop quality control specifications for its manufacturing process.

Mini vessels and mini paddle dissolution testing systems are smaller versions of the USP 2 Apparatus. The concept of the mini paddle apparatus is similar to that of the USP 2 setup but it is scaled down about to 1/5 of the volume and 40% …

Effect Of Impeller Submergence On Power Dissipation And Solids Suspension In Mixing Systems Equipped With Pitch-Blade Turbines, Yufeng Song

Theses

Mixing and dispersion of solids in a liquid is a process frequently encountered in the pharmaceutical industry and often conducted in cylindrical baffled tanks stirred by mechanical impellers. In operations where the liquid level is decreased (as often which emptying the tank) the process must be stopped when the solids are no longer suspended. In this work, the minimum agitation to suspend solids (Njs) when the liquid level was lowered, and the impeller submergence S_b changed as a result were determined for the case of a six-blade, pitch-blade turbine (6-PBT) impeller. The power consumed by the impeller …

Bio-Medicinal Application For Plasma Electrolytic Oxidation Of Metals, Zunjian Yang

Theses

Plasma electrolytic oxidation (PEO), a novel method for forming ceramic coatings on metals, has been researched extensively in recent times. By applying high voltage between dielectric thin films, a plasma micro-arc is induced through penetration of breakdown in film boiling layer. Such a method takes advantage of high processing time, low equipment requirement and advanced coating performance.

Titanium alloys, Ti-6Al-4V and pure Titanium Grade 2, are two of most common Titanium alloys in daily use. Both of such Titanium alloys show great potential utilization in bio-medicinal application, especially in implants, for its excellent biocompatibility, high tensile strength, and high elastic …

Molecular Modeling Of Sigma 1 And Sigma 2 Receptor Ligands: Pharmacophore Development And Comparison Using Discotech And Bioactivity Prediction Comparison Of Ab Initio And Density Functional Comfa Studies For Spiro And Other Receptor Ligands, Lisa M. Kardos

Dissertations

The role of the biological receptor is currently being studied by researchers in medicine. Information about sigma receptors in particular can be gained by studying the ligands associated with each type, sigma 1 or sigma 2. Sigma 1 receptor ligands consist of drug candidates that often have psychiatric and neurological applications; sigma 2 receptor ligands consist of drug candidates that have been linked with cancer treatment among other applications.

Molecular modeling of biological receptor ligands often encompasses pharmacophore development and Comparative Molecular Field Analysis (CoMFA). Pharmacophore models are developed to understand the unique features such as binding groups that make …

Reliability Study Of Zr And Al Incorporated Hf Based High-K Dielectric Deposited By Advanced Processing, Md Nasir Uddin Bhuyian

Dissertations

Hafnium-based high-x dielectric materials have been successfully used in the industry as a key replacement for SiO₂ based gate dielectrics in order to continue CMOS device scaling to the 22-nm technology node. Further scaling according to the device roadmap requires the development of oxides with higher x values in order to scale the equivalent oxide thickness (EOT) to 0.7 nm or below while achieving low defect densities. In addition, next generation devices need to meet challenges like improved channel mobility, reduced gate leakage current, good control on threshold voltage, lower interface state density, and good reliability. In order to …

Optical Properties Of Strain-Engineered Multilayer Si/Sige Nanostructures, Selina Akter Mala

Dissertations

The long carrier radiative lifetimes in indirect band gap semiconductors such as crystalline Si (c-Si) and Ge impede the development of efficient light-emitting devices and lasers. Multilayer Si/SiGe nanostructures are considered to be the strong candidates for efficient and high-speed optoelectronic devices integrated into CMOS platforms. Since c-Si and Ge have a considerable lattice mismatch of ~ 4.2%, Si/Si_1-xGe_x(x < 0.5) nanostructures in the form of nano-layers (NLs) or cluster multilayers (CMs) modify the band structure and create non-uniform strain distribution. Engineering of Si/Si_1-xGe_xnanostructures with the predicted composition and interface abruptness, which controls spatial separation between electrons and holes and carrier radiative recombination rate, is critical in producing the desired fast and efficient photoluminescence …

Electronic, Optical, Mechanical And Thermoelectric Properties Of Graphene, Sarang Vilas Muley

Dissertations

Graphene, a two-dimensional allotrope of graphite with sp² bonded carbon atoms, is arranged in honeycomb structure. Its quasi one-dimensional form is graphene nanoribbon (GNR). Graphene related materials have been found to display excellent electronic, chemical, mechanical properties along with uniquely high thermal conductivity, electrical conductivity and high optical transparency. With excellent electrical characteristics such as high carrier transport properties, quantum Hall effect at room temperature and unusual magnetic properties, graphene has applications in optoelectronic devices.

Electronically, graphene is a zero bandgap semiconductor making it essential to tailor its structure for obtaining specific band structure. Narrow GNRs are known to …

Monitoring Of Cerebellar Injury Using Micro Ecog Signals In Ketamine/Xylazine Treated Rats, Gokhan Ordek

Dissertations

Much of the cerebellar research has been conducted in anesthetized animals, particularly using ketamine/xylazine combination in rats, and yet the absolute impact of the anesthesia on the neural circuit remains unanswered . In the current study, spontaneous electrical activity and sensory evoked potentials from the cerebellar surface with chronically implanted, flexible-substrate, multielectrode arrays in rats were collected and analyzed with the motor cortex signals. The power spectra and the intercontact coherence plots of the spontaneous activity in the awake-quiet animals extended up to 800 Hz in the cerebellum and only up to 200 Hz in the motor cortex. Ketamine/xylazine anesthesia …

Modeling Biodegradation Settlement Of Municipal Solid Waste (Msw) Based On Measurement Of Landfill Gas And Degradable Solids In Leachate Recirculated Bioreactors, Vatsal Atulkumar Shah

Dissertations

The purpose of this work is two-fold: 1) to understand the phenomenon of the biodegradation process of municipal solid waste (MSW) in leachate recirculated bioreactors, and 2) to create a realistic predictive model based on this understanding which is capable of supporting a laboratory-to-field relationship for bioreactor landfills. Biodegradation is best described by loss of mass; however, primary researchers have assumed the phenomenon to be purely volume loss and modeled best by mechanical processes using a conservation of energy approach. It is suggested that the phenomenon requires a fundamental understanding of biodegradation process which results in a loss of mass, …

Developing An Insulin Producing Tissue Using Mouse Embryonic Stem Cells, Neha Mahendrakumar Jain

Dissertations

This thesis describes derivation of pancreatic insulin producing cells (IPCs) from mouse embryonic stem cells and development of three-dimensional (3D) engineered tissue system to provide physiologic culture conditions for IPCs. Upon using a previously established protocol, IPCs have been successfully derived from mouse embryonic stem cells and characterized in vitro . IPCs not only express classical markers of pancreatic beta cells but also exhibit glucose responsive behavior. Interestingly while deriving IPCs from mouse embryonic stem cells, islet endothelial cells have also been identified and successfully isolated from the culture. Derivation of a pure population of endothelial cells expressing specific markers …

Expert System For Energy Optimization Of Buildings Using Sustainable And Resilient Strategies, Victoria Ann Scala

Dissertations

An expert system is developed using the science of heuristics to better model energy usage in existing commercial buildings and to predict future improvements more accurately. The software performs an initial audit analysis of all the major building systems including building envelope, HVAC, lighting, office equipment and appliances, water and hot water, and waste handling. A novel feature of the expert system is that it analyzes energy flow within the building more interactively and cohesively, as opposed to looking at each system individually as do most energy analysis tools on the current market. Both forward and backward chaining strategies are …

Inkjet Printing Multifunctional Chromatic Sensors And Chromism Study, Aide Wu

Dissertations

The thermochromism and chemochromism of polydiacetylene (PDAs) and PDA/ZnO nano composites have been systematically studied by attentuated total reflection (ATR)- Fourier transform infrared (FTIR), temperature-dependent Raman, colorimetric (using optical densitometry) and differential scanning calorimetry (DSC). Reversibility of PDAs has been enhanced by the formation of chelation between the carboxylic groups on side chain of diacetylene and Zn ion. The thermochromatic transition temperature increases with the concentration of ZnO.

Thin films of polydiacetylene (PDAs) and PDA/ZnO nanocomposites have been successfully fabricated by inkjet printing both solution type and suspension type ink. Results suggest that PDA monomers are well-aligned and closely packed …

Continuous Polymer Coating Of Host Particles By Hollow Fiber-Based Crystallizers, Dengyue Chen

Dissertations

Currently, no technique is available to continuously film coat nano-sized drug particles with a polymer to produce large amounts of free-flowing coated particles. In this work, Eudragit RL 100 and Poly (D, L-lactide-co-glycolide) (PLGA) are chosen as the coating polymers; Cosmo 55 (550 nm silica particles), Aerosi l 200 (hydrophilic 12 nm silica), Aerosil R974 (hydrophobic 12 nm silica) and Griseofulvin (10 lam drug particles) are chosen as the host particles. Two novel crystal l izers are designed and fabricated to continuously coat the host particles with different polymers: solid hollow fiber cooling crystallizer (SH FCC) and porous hollow fiber …

Polymeric Nitrogen By Plasma Enhanced Chemical Vapor Deposition, El Mostafa Benchafia

Dissertations

With the urgent need for new environmentally-friendly energetic materials, the field of polymeric nitrogen, predicted to be a high energy density energetic, is now at a critical stage in its development. In spite of extensive first principles calculations regarding the existence and stability of different polymeric nitrogen structures, their successful syntheses have been rare. This dissertation describes the first detailed study of a plasma-enhanced chemical vapor deposition (PECVD) approach to the synthesis of polymeric nitrogen. PECVD provides non-equilibrium conditions known to produce high pressure-temperature phases. Molecular nitrogen mixed with hydrogen and argon is used as the gas phase precursor to …

Fem Of Electrospinning Compared To Inkjet Printing Model, Maikel Ghaly

Theses

Electrospinning is a process that uses electrostatic forces to produce nanofibers, or fibers in the nano scale. Nanofibers are widely used in many fields like drug delivery and tissue engineering. Nowadays, it is gaining much attention in the research community as an advantageous process. However, there are many parameters that controlnanofiber formation. This research intends to develop a model of electrospinning on the basis of an inkjet printer technique by using a computer aided simulation (COMSOL). Inkjet printing is a technique that delivers small volumes at high repetitions which can betransported by electrostatic forces through the air onto their intended …

An Electrospinning Apparatus For The Production Of Heterogeneous Scaffolds And Their Application In Cartilage Regeneration, Andrew Ryan Hollingsworth

Theses

The human body contains a vast array of soft and hard tissues, each with their own unique set of physical, chemical, mechanical, and electrical properties. It is the combination of these tissues that allows the human body to function as it does. However, these tissues are subject to wear, fatigue, and injury and thus can potentially limit the functions of the body. Therefore, tissue engineering has sought various natural and synthetic materials that can be used for fabrication of cellular scaffolds that have the ability to promote cellular attachment, proliferation, differentiation, and eventual whole tissue formation for replacement and repair …

Assessment Of Flood Protection Strategies For Combined Critical Infrastructure Failure And Hurricane/Storm Surge Events In The Meadowlands Area, Nisharg Dipakkumar Dalwadi

Theses

As a result of a wide-reaching comprehensive post-Sandy NJIT project entitled "Flood Mitigation Engineering Resource Center (FMERC)", a detailed investigation of alternative measures for flood mitigation in the Meadowlands area was completed in June 2014. The project involved the assessment of flood impacts, and the evaluation of a range of structural and non-structural capital improvement measures, maintenance, operations and regulatory measures, and broad system design and redundancy measures.

The basic objective of this thesis is to develop an innovative procedure for the enumeration and simulation of probability-weighted combined events, e.g., Oradell dam failure under various scenarios (sunny day, water level, …

An Embedded System Supporting Dynamic Partial Reconfiguration Of Hardware Resources For Morphological Image Processing, Gyana Ranjan Sahu

Theses

Processors for high-performance computing applications are generally designed with a focus on high clock rates, parallelism of operations and high communication bandwidth, often at the expense of large power consumption. However, the emphasis of many embedded systems and untethered devices is on minimal hardware requirements and reduced power consumption. With the incessant growth of computational needs for embedded applications, which contradict chip power and area needs, the burden is put on the hardware designers to come up with designs that optimize power and area requirements.

This thesis investigates the efficient design of an embedded system for morphological image processing applications …

Fates Of Spilt Oil And Factors Affecting The Bio-Degradation Of Oil: A Review, Amogh-Ranganath Chakravarthy

Theses

The usage of crude oil and its products is increasing; in turn, the number of spills is also going up. The inland spills are the more recurrent spills in the U.S today. This review article deals with the weathering of oils, which commences just after oil spills into the environment with various processes such as evaporation, dissolution, photo-oxidation, dispersion, emulsification and bio-degradation along with other possible fates. Biodegradation is one of the most significant processes of weathering which depends on oil physical and chemical characteristics, environmental characteristics, pH, salinity and oil concentration. There is a range of oil concentration for …