Engineering Commons^™

Agitation Of Dilatant Fluids, Vijay Jang Datta

Theses

No abstract provided.

Centering In Parallel Channel Systems, Allen Katz

Dissertations

Several types of signal processing systems in which the signal flows along parallel channels in a fashion similar to the auditory system have been investigated. The effect of excitation with signals containing both single and multiple spectral peaks (formants) was considered. In particular, the effect of nonlinear interaction between channels, referred to as centering, in the presence of noise was studied.

These systems were investigated for their value, both as information processing networks and as models of the auditory system.

The analysis indicates that parallel channel systems, in general, exhibit excellent performance in the presence of noise, and that a …

Prediction Of The Physical Properties Of Pure Gases And Liquids, James L. Filson

Theses

A computer programmed system for the estimation of physical properties of pure compounds from minimum data input on compound type and structure was developed for both gas and liquid phase conditions.

The properties of the gas phase which can be obtained include:

• gas volume
• compressibility
• normal boiling point
• volume at the normal boiling point
• critical temperature, pressure, volume compressibility
• vapor pressure
• Riedel factor
• acentric factor
• ideal heat capacity
• heat capacity at constant pressure
• heat capacity at constant volume
• dipole moment
• intermolecular distance
• hard sphere volume
• viscosity at low pressure
• viscosity at elevated pressure
• thermal conductivity at low pressure
• thermal conductivity …

A Simulation Model Capable Of Performing The Calculations Involved In Defining A Crude Preheat Train, Robert G. Parker

Theses

A simulation model has been developed for a system of ex changers to preheat the feed to a crude distillation unit. In conjunction, a Fortran program for the performance of the model calculations by digital computer was written. Two types of preheat system were simulated, a single train system and a split (or parallel) train system. A number of features were included in the program for flexibility and versatility. A particular effort was made to have the model represent as economical a preheat system as possible.

The model program was used to obtain computer-calculated results for both single-train and split-train …

Incineration Of Solid/Liquid Human Waste, Theodore Joseph Wayne

Theses

This thesis encompasses the design criteria required to produce an effective incineration system for the disposal of solid/liquid human waste. Coupled with the overall design parameters is an investigation of the chemical decomposition of the waste during the incineration process, odor treatment and control, and the physiological effects on the human body due to the inhalation of the toxic gases given off during the combustion of human waste.

The variables involved in the combustion process are studied and equations presented that relate the combustion variables of flame temperature, residence time and air requirements. These equations are tested based upon published …

A Nomograph For The Rapid Solution Of The Arrhenius Equation, Joseph John Lamont

Theses

There are presently no calculational aids for the rapid computation of the Arrhenius parameters of the chemical reaction rate equations.

Two nomographs for solving the Arrhenius equation for the relative reaction rate constants at different temperatures, and for computing activation energies and frequency factors are presented. Several graphs and tables of the relative reaction rate constant as a function of activation energy and temperature are also presented.

The nomographs, graphs and tables can be used, singly or combined, in lieu of numerical calculation for the solution for Arrhenius parameters, or the computation of rate constants.

A computer program included in …

Computer Model For Reactor Design Of An Ethane Cracking Unit, Derek J. Lough

Theses

The purpose of this thesis is to develop a Fortran [sic] Computer Program to model the radiation section of a pyrolysis tube reactor designed for cracking 100 percent ethane feed. The model calculates the length of the tubular reactor required to obtain a specified ethane conversion or the ethane conversion for a specified reactor length. The resulting solution yields a conversion profile, a temperature profile, and the reactor residence time as a function of tube length. From this data it can be determined if the design is adequate and lies within the reactor model's constraints.

Sidelobe Suppression In Chirp Radar Systems, Stephen N. Honickman

Dissertations

Pulse radars extend target range detection by increasing the transmitted pulse width. On the other hand, target resolution is enhanced by reducing the system pulse width. These dichotomous requirements led to the invention of chirp radar systems which achieve greater target resolution for a given detectable range by frequency modulating the carrier frequency of the transmitted pulse. Along with the advent of chirp radars came the extremely simple and reliable technique of chirp signal generation known as "passive generation". However, one of the undesirable features of "passive generation" lies in the infinite time required for transmission of the resultant pulse, …

Local Mole Fraction Equations For The Excess Free Energy Of Mixing, Jose Mario Marina

Dissertations

An extensive study of local mole fraction equations aimed at obtaining a two parameter expression for the Excess Free Energy of miscible and immiscible systems has been undertaken.

Initially our approach was to modify existing equations by substituting those parameters reflecting interaction between like molecules by the pure component energies of vaporization. This resulted in a one parameter modification of the three parameter Wilson equation, which correlates data poorly and a two parameter modification of the NRTL equation which correlates binary miscible data with fair accuracy. A modification of the Scatchard-Hildebrand equation, where mole fractions are substituted by local mole …

A New Technique For Steady State And Transient Analyses Of Incompressible Flow Networks, George V. Catanzaro

Theses

A new technique for the calculation of the transient or the steady-state mass flow rate and pressure distribution in incompressible flow networks is presented. Employing the matrix method of network analysis, the nodal continuity and branch momentum equations are solved simultaneously to obtain explicit relations giving the unknown nodal pressures and branch mass flow rates. In this manner, the transient or the steady-state behavior of incompressible flow networks with arbitrary configuration having nodal sources and sinks as well as branch transducers can be determined. In contrast with the conventional steady-state network analysis methods, the new technique can be extended to …

A Study Of Heat Transfer And Inlet Flow Behavior In Molten Polymer Systems, Min Ho Choi

Theses

Two separate studies have been done in the present work: one to study the entrance effects in flow in molten polymer systems and the other to investigate the heat transfer to thermally softened flowing polymer.

The equipment for the entrance effect was designed to study the isothermal flow behavior of a polymer melt in the entrance region. The main object of this investigation was to find the entrance length for the melt to relax and to separate the pressure drop into viscous and elastic effect. Due to the failure in developing a proper pressure measuring device the experiment was not …

The Reaction Of O-Propylphenyl Azide With Di-N-Propylamine, Seyed Ziaeddin Razavi

Theses

Nitration of n-propylbenzene resulted in O-nitro-n-propylbenzene. Reduction of this compound gave o-n-Propylphenyl azide was prepared by diazotization of o-n-propylaniline followed by treatment with sodium azide.

Photolysis of o-n-propylphenyl azide in di-n-propyl-amine yielded two new azepines, 2-di-n-propylamino-3n-propyl-3H azepine and 2-di-n-propylamino-7-n-propy1-7H-azepine. Their structures were assigned on the basis of their physical properties (i.e. I.R., U.V., N.M.R., N.S. and elemental analysis).

Photolysis of the azide at room temperature gave 26.9% o-n-propylaniline and 4.3% 2-di-n-propylamino-3-n-propy1-3H azepine, but when the photolysis was carried out in the presence of the triplet photosensitizer (xanthen-9-one) the yield of o-n-propylaniline was increased to 34.6% and the yield of 2-di-n-propylamino-3n-propy1-3H-azepine …

Stability Analysis Of A Continuous Stirred Tank Reactor With An Autocatalytic Reaction, David Elliot Rosenberg

Theses

The basic principles of stability analysis are set forth, including the development of a mathematical model, steady state analysis, integration of the dynamic system equations, and predictions of transient responses. The equations for the mathematical model are developed for a continuous stirred tank reactor with a cooling jacket, containing an autocatalytic reaction, in unsteady state operation. These equations are numerically integrated to obtain a good picture of reactor dynamics about the steady state. State variable methods, including the classical linearization theorems and Lyapunov's Second Method, are utilized to predict bounds of stable reactor behavior. A discussion of the shortcomings of …

Transverse Vibration Of A Class Of Orthotropic Plates, Nicholas J. De Capua

Dissertations

This study determines the eigenvalues, eigenvectors, and nodal patterns of a class of orthotropic plates whose geometry is governed by the equation

(x/a)^α + (y/b)^β = 1,

where the parameters a, b, a, and a permit the plate geometry to vary over a range which includes the rhombus, circle, ellipse, square, and rectangle.

Variable thickness, inplane forces, and mixed or discontinuous boundary conditions are also considered. The following assumptions have been employed:

i). plate is thin with respect to other dimensions,

ii). deflections are small,

iii). rotary inertia and shear are neglected.

The method of analysis employed is …

A Theoretical And Experimental Study Of The Mechanism Of Axoplasmic Convection In Nerve Fibers Driven By Peristaltic Surface Waves, Robert John Biondi

Dissertations

In the study of cell biology, investigators have found that substances which are produced within the cell nucleus are sometimes found throughout the cell at points distant from the site of production. In the case of nerve cells (neurons), this is particularly dramatic because of the unusual elongated geometry of these cells.

A neuron possesses a cylindrical tubular extension called an "axon" or "axis cylinder" which is characterized by a large length-to-diameter ratio (10³-10⁶). The existence of a continuous proximo-distal flow of axoplasm within these cylindrical axons has now been demonstrated by numerous investigators. In …

Continuous Interfacial Polycondensation Of Nylon 6-10, Sumer Raj Hundia

Theses

Nylon 6-10 has been prepared by continuous interfacial polycondensation hexamethylenedlamine and sebacoyl chloride in a stirred system. The effect of monomer concentration and stirring on the intrinsic viscosity of the polyamide 6-10 solution in m-cresol was measured.

As stirring (RPM) and monomer increased the intrinsic and the polymer yield through a maximum. Diffusion coefficients (D_AB) for hexamethylenedlamine were for hexamethylenedlamine were and were used for the calculations of j_D factors and K/DAB ratios. A relationship and j_D factors was established by a correlation curve.

Development Of An Apparatus To Obtain Temperature Profiles Of Molten Flowing Polymers, Ismail Kemal Saltuk

Theses

The object of this investigation is to develop and test an apparatus to predict temperature profiles of polymer melts in laminar flow in a heat exchanger, with non-isothermal wall conditions.

A commercial polyethylene melt is pumped at various flow rates through a smooth 0.957 in. I.D. pipe. The entrance temperature of polymer is maintained uniform.

Radially distributed six thermocouples (0.062 in. 0.D.) are placed at 2.5 ft. intervals from the entrance of heat exchanger. Immersion of these probes parallel to the flow direction, reduced the errors due to the conduction of heat from the tube wall to the thermocouple stems. …

Theoretical And Experimental Evaluation Of Cardiac State Utilizing Indicator Dilution Methods For Nonuniform Ventricular Mixing, Stanley Myron Welland

Dissertations

This research is directed toward the development and application of a new approach to the evaluation of cardiac work to diagnose cardiac state. A procedure has been developed for calculating the work performed on the fluid by the left ventricle during the heartbeat. The procedure involves the continuous direct measurement of ventricular fluid mixture temperature during and following the controlled injection, through a catheter, of a known volume of cold saline into the left ventricle. The measured mixture temperatures are used to calculate continuous ventricular volumes during the systolic and diastolic functions of the heartbeat. Plotting measured ventricular pressure versus …

A Kinetic Study Of The Anionic Polymerization Of Neopentylethylene Oxide, Albert Edward Meisinger

Dissertations

Kinetic data for the anionic polymerization of bulk neopentylethylene oxide were determined. The initiator used for this study was potassium t-butoxide. Polymerization runs were made at temperatures of 39.9, 60.0 and 80.3°C using monomer to initiator ratios of 50/1 and 20/1.

The polymerization reaction was found to follow pseudo first order kinetics up to about 60% polymerization and second order after this. The energy of activation for the propagation reaction was found to be 17.4 ± 1.2 K cal/mole and 18.5 ± 1.5 K cal/mole, respectively, for the pseudo first order and second order portions of the polymerization. The value …

On The Classification Of The Solution Space Of Linear Anisotropic Elasticity, Richard Clement Carman

Dissertations

A method is developed within the framework of Synge's function-space interpretation of problems in linear elasticity which allows the consideration of solutions to problems for anisotropic media in terms of the solutions of a corresponding isotropic problem and corresponding simpler anisotropic problems. The isotropic solution and simpler anisotropic solutions establish points in each of the statically and kinematically admissible spaces for the anisotropic problem. The established points are used to define sets of vectors in the statically and kinematically admissible spaces. The linear independence of these vectors can then be determined by a pair of criteria developed in this work. …

Continuous Esterification Of Lactic Acid With N-Butyl Alcohol, Robert Dix

Dissertations

A model is proposed for the reactions occurring when an aqueous 30% lactic acid solution is contacted with a primary alcohol, normal butanol. Kinetic and equilibrium data for the esterification reactions of monomeric lactic acid and dimeric lactic acid were determined in a series of experiments using an ideal overflow back-mix reactor. The variables studied were reaction temperature and catalyst concentration.

It was determined that the significant reactions occurring within this system are the esterification of monomeric lactic acid with n-butanol and the esterification of dimeric lactic acid with n-butanol. Other reactions that may be postulated to occur within the …

A Study Of The Dynamics Of Gas Adsorption In An Air Fluidized Bed, William Charles Zalewski

Dissertations

The dynamics of gas adsorption was studied in an air fluidized bed containing activated alumina particles. The adsorption studies made with a fixed bed and in the transition region between minimum fluidization velocity and 2.0 times minimum fluidization velocity, compliment work done at higher velocities. With adsorption, particle motion controlled the overall dynamics of the fluidized bed. A different approach in applying the two phase fluidization model was necessary to satisfactorily describe unsteady state adsorption in fluidized beds. Experimental and theoretical results were compared in frequency response plots to obtain a rigorous comparison. Good agreement was obtained for flow rates …

Correlation And Prediction Of Diffussion Coefficients In Binary Gas Systems, Raymond Gerald Bailey

Theses

A correlation was developed for estimating binary gas diffusion coefficients by the reference substance method, in this case using the viscosity of air and subsequently its corresponding temperature. The derivation was made by the linear least square analysis of 65 different binary systems comprising 161 separate data points at temperatures ranging from 193°K. to 1200°K. At any given temperature only the critical molal volume and the molecular weights of the two gases of interest are required to calculate the diffusion coefficient. The correlation based on the viscosity of air had an average error of 7.67%. The correlation using temperature had …

The Absorption Of Hydrogen Chloride From Dilute Air Mixtures, Edgar L. Demarest

Theses

A study was made of the absorption of hydrogen chloride from air mixtures containing from 1 to 40 mgm. HCl/liter (1000 to 40000 mgm./m.³), using a.4" diameter tower packed with 2" Intalox saddles, irrigated with water or with sodium hydroxide solutions of 0.3% to 3.8% concen?tration. Gas flow rates of 177 to 752 lbs./(hr.)(ft.²) were investigated at three liquid rates: 2960 ; 4260, and 5700 lbs./(hr/)(ft.²). All data were collected below the flooding point.

Correlations of the height of a transfer unit with the superficial gas velocity were prepared for water and for sodium …

Aiir Pollution Emissions From Turbine Powered Aircraft, Raymond Arthur Filippini

Theses

The major pollutants that are emitted by jet aircraft include: particulate matter (soot), carbon monoxide, aldehydes, hydrocarbons, and nitrogen oxides. The first of the pollutants, particulate matter (smoke), constitutes not only a visual nuisance but is also a potential health problem. The rest, which are not visible, are irritants and in high enough concentrations can be toxic.

Since pollutants emitted by jet aircraft are of the same type as those given off by a car, a direct comparison is possible. In one landing take off cycle (LTO), a four engine jet aircraft emits the same amount of particulate matter as …

The Relation Of Heat Transfer To Power Consumption Of Liquids In Turbulent Flow, John D. Bien

Theses

The relationship between the heat transfer ability and the power input requirement of liquid coolants in a turbulent heat transfer condition was investigated. A correlation in terms of the liquid physical properties and the required volumetric flow was proposed and the use of this correlation in selection of liquids as coolant was discussed. The optimum condition for a high heat transfer/power input ratio was also discussed.

Phosphate Removal From Sewage Using A Combination Of Ferric Chloride And A Polymeric Flocculant, Ravindra C. Patel

Theses

The present work is concerned with a newer technique and approach to the problem of phosphate removal from waste water. This includes the removal of phosphate from the sample of activated sludge, i.e., a sample from the aeration tank of the secondary sewage treatment. The phosphate is removed by using ferric chloride as a precipitating agent and a cationic polyelectrolyte (P.E.) as a flocculating agent. Results of this study showed that: (a) P.E. addition gives a significant improvement in phosphate removal over that obtained by ferric chloride alone. In some cases the phosphate removal increased from 92 to 96.5 per …

A Digital Computer Simulation Of A Batch Or Semi-Batch Reactor, Robert Edward Viczorek

Theses

A digital computer simulation of a batch or semi-batch reaction was developed. The system consisted of a jacketed, agitated vessel equipped with a temperature controller modulating a control valve in the stream to the jacket. The reaction was liquid phase, and the jacket medium was liquid.

The program was written in a general form so as to be applicable to any liquid phase reaction with minimum modification.

A numerical technique was employed using initial values of the process variables in the first cycle of calculations for a time interval, and then using average values for further iterations. The simulation proceeded …

Heat And Mass Transfer In The Lyophilizatiuon Of Pharmaceuticals In Vials By Conduction Heating, William Warren Walsh

Theses

This thesis investigates the lyophilization of pharmaceuticals in vials by conductive heat transfer. The process phase diagram and methods of determining the solution eutectic temperature are reviewed. The theoretical considerations of heat and mass transfer pertaining to this process are discussed.

Lyophilization tests of distilled water and of mannitol solutions are used to indicate the relationship between vacuum chamber total pressure and the product/vial interface temperature. Experiments with 10% lactose solutions are used to determine the effect of shelf fluid temperature, product height and chamber vacuum on product/vial interface temperature. Test on a pharmaceutical product are used to confirm the …

The Transferability Of Force Constants Among Olefins, John Martin Comerford

Theses

A normal coordinate analysis of the in-plane vibrations of ethylene was performed using a modified valence force field, a modified Urey-Bradley force field and a hybrid orbital force field. The B_2u species of isobutene was also analyzed. An attempt was made to transfer force constants from ethylene and thereby solve the A₁ species of isobutene, but a solution could not be obtained. This suggests that simple transference of force constants is not feasable in this case.

The potential energy distributions obtained for ethylene are discussed. The normal coordinates calculated in this work are appended.