Engineering Commons^™

Analysis Of Deflection Temperature Under Load, Anand M. Jagani

Theses

Deflection Temperature Under Load (DTUL) is an experimental value commonly used by designers to characterize a plastic in a high temperature environment. This value is currently measured by a standard test procedure specified by the ASTM D-648. A theoretical analysis of this test was made and computer programs were developed to calculate the Deflection Temperaure of Plastics Under Load based upon temperature dependent flexural modulus data and temperature dependent thermal properties of the plastics of interest. The results obtained from the theoretical analysis agree closely with the experimental values found in the literature for two resins. An analysis of the …

An Inquiry Into Engineering Career Choice And Career Satisfaction, Gunars Bachs

Theses

The purpose of this thesis was to ascertain factors that motivate a person to study engineering, and to examine the aspects of engineering career satisfaction. This study was conducted as a survey by means of a mail questionnaire, which was distributed among graduates of New Jersey Institute of Technology. Another sample, comprised of master's degree recipients of NJIT who had received their bachelor's degree from other undergraduate schools, served as a control group.

Motivation factors and positive and negative aspects of the engineering career were established and ranked in order of their importance. A method to measure career satisfaction was …

Decentralized Optimal Control With Application To Dynamic Routing In Computer Communication Networks, Ning Wang

Dissertations

This research considers the dynamic routing problem of computer communication networks in the framework of decentralized control theory. The routing dynamics are modeled in terms of a state equation with multiple controllers. Routing, or control of message flow, is formulated as an optimal control problem with multiple decision makers. Each decision maker may have access to different set of information and work cooperatively to optimize a common system performance index.

Necessary and sufficient conditions for optimality are derived for a system with a deterministic and a stochastic traffic patterns under a linear information structure and a quadratic performance index. The …

Mathematical Models Of Unsteady Operation Of A Packed Column, Jen-Fu Chao

Dissertations

Analytical solutions of differential equations applicable to extraction, ion exchange, or adsorption processes in packed beds are presented. Results are given for three different cases. The first case accounts for adsorption phenomena only. The second one includes surface adsorption on particles and the effects of longitudinal dispersion in the bed. The third one deals with diffusion in particles and longitudinal dispersion in the bed. In the mathematical modelling of these three cases, a linear equilibrium relationship between the solute in the liquid phase and solute in the solid phase is used. The first case is solved using the single boundary …

The Settling Of An Arbitrary Number Of Spherical Particles Arranged On The Corners Of A Regular Polygon In A Viscous Fluid, Eric Robert Bixon

Dissertations

The creeping motion equation has been solved for the case of planar arrays of spheres settling under the influence of gravity in a viscous fluid. The solution is a general solution which applies to an arbitrary number of spheres. All particles will lie at the corners of a regular polygon. Thus, two particles side by side, three particles in an equilateral triangular array, or four spheres in a square array will be special cases of the general solution.

The solution has been obtained by a unique application of the method of reflections. Only a first correction to the drag has …

Behavior Of Joints Using Reinforced Polymer Concrete Under Seismic Loading, Ishac H. Kafrouni

Theses

This report describes the analysis and testing of two types of exterior beam-column joints conducted at New Jersey Institute of Technology. The testing program consisted of six beam column joints with varying strength cementing agents in the joint region: normal, high strength and polymer concrete. Half of the specimens contained 1.5 percent by volume of hooked end fibers. The study of the behavior of these beam column joints has indicated 2 cases of failures: a critical region in which the inelastic behavior was controlled by bending and, a critical region in which the inelastic behavior was controlled by high shear. …

Design Of A Photoreactor For The Oxidation Of Toxic Pollutants In Water By Ozone And Ultraviolet Radiation, Shahab Rashid Khan

Theses

A photoreactor has been designed to oxidize refractory chemicals found in water using ozone and ultraviolet radiation. The feasibility of the ozone/UV process has been examined by conducting experiments with three model compounds, namely, (1) o-chlorophenol (2) m-chlorophenol and (3) p-chloro phenol. For o-chlorophenol and p-chloro-phenol, reactions were very fast with ozone/UV oxidation and somewhat slower with m-chlorophenol. It is concluded that UV irradiation increases the decomposition of ozone and the resulting unstable intermediates are much more reactive than ozone. Ultraviolet light also helps in decomposing the substrate molecules. The effect of UV upon decomposition of ozone is more pronounced …

High Speed Puncture Impact Studies Of Structural Foam Plaques, Shashi B. Kumar

Theses

The constant velocity high speed impact study was conducted on different thermoplastic and thermoset structural foam plaques to study their impact behavior. Plaques of Noryl, Polycarbonate, Polystyrene and Polyurethane were carefully chosen to represent a true sample of the manufactured product. Test plaques were marked such that specimens could be tested for variation in location, thickness of the plaque and variation between plaques. High speed puncture impact experiment was conducted on each specimen and the results were analysed.

The test results showed that the impact performance varied significantly over the plaque. Noryl and Polycarbonate did not exhibit any correlation for …

An Interactive Procedure For Numerical Design Optimization, Jaehwan Lee

Theses

An interactive version of the numerical design optimization method of Pappas for the solution of nonlinear optimization problems is presented in this thesis, A designer intervention strategy is employed herein for interactive optimization to allow the designer to control and manage the optimization process. This procedure embodied in the interactive CADOP6 program is tested on the ten bench mark problems of Eason and Fenton to illustrate the designer intervented optimization process and to provide a comparison with the fully automated procedure of Pappas This designer intervented interactive program appears more effective and faster than the completely automated CADOP5 code on …

Spectral Analysis Of Brainstem Auditory Evoked Responses, Amir Hossein Massumkhani

Theses

In this study, the power spectrum density of the brainstem auditory evoked responses is estimated by the method of periodogram. Several techniques for reducing the leakage due to the finite length of data, smoothing the spectrum and reducing the ambiguity in the spectrum due to the resolution are studied. It is shown that a Hamming window reduces the leakage considerably and zero extention of the data to 512 points produces sufficient spectrum bandwidth. Three major peaks are observed at 100, 500, and 1000 Hz which are stable for different evoked responses. In one case with a delayed wave V, the …

Measurement Of Thermal Conductivity Of Polymers Using Line Source Method, Manojkumar C. Patel

Theses

The purpose of this investigation was to evaluate the Line Source technique to measure the thermal conductivity of different molten polymers. Although the results obtained using this method are within acceptable experimental error limits, due to tec reasons explained, the results are not as accurate as claimed in the literature which describe this technique.

Experimental Investigation Of An Axisymmetric Air Jet Impinging On A Flat Plate, Saibal Basu

Theses

Experimental investigation was carried out on a circular, submerged, axisymmetric turbulent air jet-with normal impingement on a smooth, flat, square lucite plate, The flow was considered to be incompressible because the velocity of the jet was not too high, with Mach Number of the order of 0.3. Three nozzle diameters of 0.375" (9,525 mm), 0.250" (6.35 mm) and 0.125" (3.175 mm) were used with Reynolds number ranging from 7,000 to 70,000.

Various flow parameters were measured to obtain the velocity and pressure distributions at the surface of the flat lucite plate and along the centerline of the normal impinging air …

Deposition Of Particles In Horozontal Parallel Plate Channel Due To Image Charge, Inertia, Viscosity And Gravity, Chi-Young Chu

Theses

This investigation was made to determine the effect on the deposition of particle in a horizontal parallel-plate channel due to the influences of image charge, viscosity, inertia and gravity. The flow considered was lamina, incompressible and steady. The flow patterns considered were uniform and fully developed with symmetry about the axis of the channel.

The governing equations derived for a particle were based on Newton's Second Law of motion. Since the resulting governing equations are linear second order differential equations, Runge-Kutta algorithm is used to solve the problem and graphical techniques is used to interpret the results of the numerical …

An Experimental Investigation Of Round Normal Impinging Jet Of Water, Dipendra Saharay

Theses

The various flow parameters of round jets of water impinging normally on a flat plate are measured experimentally. The velocity and pressure distribution along the axis of the jet at various sections of the jet parallel to the horizontal lucite striking plate and along the impinging surface was found. The nozzles used were 1/4 inch and 1/2 inch in diameter. The Reynolds number based on the nozzle diameter was 15,000 to 25,000. The distance from the jet origin to the deflecting boundary ranged from thrice the diameter of the jet to twelve and sixteen times the diameter of the jet. …

Preparation And Characterization Of Blocked Diisocyanate Monomers For Dental Applications, Stephen Richard Angeli

Theses

Six new monomers were prepared and characterized. The six monomers are blocked diisocyanate compounds. In the preparation 2,4-tolylene diisocyanate was first blocked with 2=hydroxyethyl methacrylate in the para NCO position. Six different blocking agents were then used to block the ortho NCO in the preparation of the monomers: (1) p-methoxyphenol, (2) m-methoxyphenol, (3) o-methoxyphenol, (4) p-chlorophenol, (5) m-chlorophenol, and (6) o-chlorophenol. The six monomers were characterized by mp, liquid chromatography, IR, NMR, and elemental analysis. All the characterizations show that the monomers are indeed the desired products.

The Quasisteady Approach For Thermal Analysis Of Frost Action Below Refrigerated Warehouses, Milan Kumar Bag

Theses

The quasisteady method of analysis has been used to determine the frost depth below refrigerated warehouses. For the case when the ground temperature is different from phase change temperature, the solution is obtained by numerical integration of the equation governing the phase change process. When the ground temperature approaches the phase change temperature closed form solution is obtained. The results obtained from the quasisteady method compare well with the experimental results. The results presented in this thesis should find use in the design of the refrigerated warehouses in the colder regions of the world.

Lifo Perishable Inventory (S,S,T) Model And Its Related Discount Policy, Yuan-Shyi Chiu

Theses

The objective of this thesis is to determine the optimal (s,S,T) ordering policy for a perishable inventory system with a fixed product lifetime and Poisson demand. The simulation technique is utilized to identify the optimal ordering policy which minimizes the total cost consisted of ordering, holding, shortage, and outdate costs. Upon the establishment of the optimal ordering policy, a discount policy on the outdating items is proposed to provide decision maker(s) with tradeoff between the profit and the average outdate cost.

The computer programs written in FORTRAN are designed to generate the optimal (s,S,T) ordering policy of any above-mentioned inventory …

Mathematical Model Of Temperature Profiles And Coking In A Crude Oil Heater Tube, Joseph C. Polimeni

Theses

A mathematical model to predict temperature profiles and coking of crude oil in furnace tubes is presented. The model assumes that the coking mechanism is due to a reaction in the laminar sublayer, whose rate depends upon the temperature profile. That profile is obtained by a numerical solution of the appropriate transport equations, with velocity profiles that may be laminar or turbulent, and including the temperature dependence of the crude oil properties. In addition, velocity and temperature profiles were adjusted when necessary to ensure closure of the heat and material balances. As a by-product of this study, a correction was …

The Lewis-Matheson Method On Computer, William Raymond Castner

Theses

Lewis and Matheson, in the early 1930's, developed a manual calculation technique for the solution of multicomponent distillation problems. The object of this study was to see if there would be any advantage to using the Lewis-Matheson method, once incorporated onto a computer, over current multicomponent distillation solution techniques. The immediate advantage of using the L-M technique is that it requires fewer preliminary calculations than other computer methods. It was found that the L-M technique uses about half the execution time of a typical Newton-Raphson program, while using only one tenth the computer core (memory). This was not intended to …

Kinetics Of Biodegradation Of Phenol And 2,6-Dichlorophenol, Samir Shrikant Desai

Theses

Biological removal of phenol up to 600 ppm and 2,6-dichlorophenol up to 20 ppm was studied in a well aerated fill-and-draw reactor of 41 capacity at 26 C using an activated sludge obtained from the municipal treatment plant in Livingston, N.J. Experimental evaluation of kinetic parameters showed that biodegradation of both phenol and 2,6-DCP followed zero-order kinetics. As expected, the lag time for both compounds was considerably reduced when acclimated sludge was used. However, the metabolism of 2,6-DCP was very slow even for preacclimated sludge, requiring about 36 hours to degrade only 15 ppm.. This was markedly improved by the …

Data Acquisition And Parameter Identification In Electro-Oculography, Wolfgang Poelzleitner

Theses

Electro-Oculography (EOG) is used in clinical ophthalmology to measure the time response of the corneoretinal potential (CRP) to changes in light intensity. An automatized data acquisition and system modeling link has been developed that significantly reduces processing time presently required for EOG. The data acquisition is performed on a microprocessor based instrument, which supervises the EOG-test, measures the potential and, after completion of the test, transfers the results to a mainframe computer. Parameter identification routines provide graphical representation and mathematical models for the CRP. Both nonlinear curve fitting methods and Least Squares System Identification schemes are used.

Preparation And Characterization Of Blocked Isocyanate Monomer Polymer And Equilibrium Constant Of Deblocking, Kirti P. Kamdar

Theses

A 2-Hydroxyethyl methacrylate (HEMA) adduct of toluene 2-4 diisocyanate (TDI) was prepared in petroleum ether at 35-40°C under nitrogen. In order to prepare the monomer, equimolar amounts of TDI and HEMA were reacted with P-cresol which functions as a blocking agent.,Di-butyltin dilaurate was used as a catalyst and chloranil was used as an inhibitor. The solid monomer which was obtained was recrystallized, and polymerized in chloroform using azobis isobutyronitrile as initiator.

Monomer and polymer were characterized using infrared spectroscopy, melting point, liquid chromatography gel permeation chromatography. A vapor pressure osmometric study of the polymer in three different solvents at three …

Optimization Of A New Linear Fm Detector Using Digital Signal Processing Techniques, Edward J.A. Kratt

Dissertations

This dissertation describes and synthesizes a new member of the family of FM detectors introduced earlier by Klapper and Kratt. A salient property of these detectors is low delay with excellent sensitivity. The emphasis in the new detector is on the ease of digital implementation. In addition, the new detector is also extremely linear. In congruence with the other Klapper-Kratt detectors, it makes use of zero group delay elements, balance at RF, quasi-synchronous detection and carrier cancellation. The Performance of the detector is mathematically analyzed under the conditions of a modulated input wave, sinewave [sic] interference, and noise. The results …

The Effect Of Ultrasound On The Hydrolysis Of Carbohydrates, Adel A. Khamis

Dissertations

Acid hydrolysis of dextran and cellulose were studied with and without irradiation with ultrasonic waves of different frequencies (17 - 150 KHz), and powers (0.4 - 200 w/cm²). In the case of both materials, the hydrolysis reaction was found to be first order with respect to the activity of hydrogen ions in the reaction medium. Weight average molecular weight was evaluated at different durations of the reaction course. The reaction rate of dextran was found to be proportional to the weight average molecular weight raised to the power 4/3, and raised to the power 4 for cellulose.

The …

Application Of Fuzzy Theory To Pattern Recognition, David Usechak

Dissertations

Piecewise curve approximation is used to describe boundaries of objects in pictures and waveforms. The method consists of linear and quadratic piecewise polynomial approximations in which the error must not exceed a predetermined cost threshold. A fuzzy Bayes model is used to determine if a breakpoint exists within an interval I_n or between intervals I_n and I_n+1 and to determine whether these intervals can be merged for data compaction reasons. In order to achieve these objectives a new fast algorithm has been proposed which gives good curve/object fitting. This algorithm uses a technique for generating generalized inverse …

The Quantitative Determination Of The Elemental Composition Of Coal Fly Ash Samples Using X-Ray Fluorescence, Joseph R. Cervassi

Theses

Bulk constituent elements contained in coal fly ash were measured by X-ray fluorescence spectroscopy in eight samples. Four samples were used as calibration standards for the spectrometer since their compositions were previously determined by atomic absorption spectrometry. Calibration coefficients of the standards were calculated with computer assisted regression analysis of the fluorescence spectra, and used to determine the composition of the remaining four samples. The compositions of the latter four samples, as predicted by X-ray fluorescence, were then compared to atomic absorption results. X-ray fluorescence and atomic absorption results agree best when the concentrations of elements in the standards are …

Mathematical Modeling Of The Unsteady State Glucose And Insulin Concentrations In Blood For Normal Subjects And Diabetics, Tung Shih

Theses

A mathematical model of the blood-glucose regulatory system has been developed. This model describes an oral glucose tolerance test adequately and simulates the behavior of the real physiological system using computer techniques.

Regression of the rate constants involved have been effected by conforming the theoretical functions to the data from glucose tolerance test in nonobese normal subjects, obese normal subjects, nonobese mild diabetics, obese mild diabetics, nonobese moderate diabetics and obese moderate diabetics measured by continuous sampling after oral ingestion. Most of the data were conformed within the limits of experimental error. The result of optimal parameters lead to a …

Finite Element Analysis Of The Femoral Head, Ghandikota Ramamurthy

Theses

Femoral component loosening and Prosthetic stem fractures have renewed interest in conservative alternatives to conventional total hip replacements. One such alternative is the concept of surface replacement. The objective in this study is a finite element analysis of a femoral surface replacement cup with Particular attention given to the interfacial stresses. An axisymmetric model with a grid of two-dimensional isoparametric elements is generated. This study utilizes an adaptive model so as to include the effect of bone remodeling in response to stress. The stiffness is considered to be linearly proportional to the stress in the femoral head and neck. Isotropic …

The Operational Utility Of The Walton-Mckersie Attitudinal Structuring Model In Collective Bargaining, Donald Warren

Theses

This work is an heuristic inquiry into behavioral change theory designed for application to labor/management interaction in collective bargaining. The theory itself was postulated by Richard E. Walton and Robert B. McKersie in their book A Behavioral Theory Of Labor Negotiations. The principles of their theory are highly axiomatic and their importance and validity can only be recognized through applied empirical analyses that demonstrate or refute its concept.

The aspect of the theory which is the focal point of this research pertains to the structuring and restructuring of attitudes and attendant relationships resulting from the collective bargaining process. The objective …

Mathematical Modeling Of Mass Transfer In A Hollow Fiber Dialyzer, Tzyy-Kai Yu

Theses

A mathematical model describing the flow characteristics and mass transfer has been developed for the hollow fiber dialyzer in countercurrent dialysis.

The theoretical expressions are developed from a typical Graetz problem for the stream side, and a first order differential equation for the dialyzate side. The solution of the dimensionless concentration profile is obtained as a summation of orthogonal eigenfunctions in closed form, which are given as product of an exponential function and a confluent hypergeometric function.

The analytical solution of the model has been examined by adjusting system parameters, like Sherwood number, Peclet number and the geometry of the …