Engineering Commons^™

Calibration Of Flame Ionization Detector For Chlorinated Hydrocarbons, Nahid Jabalameli

Theses

Relative Responses and Calibration Factors were developed for several volatile organic (mostly chlorinated) priority pollutant species in order to use one single stable compound (e.g.Benzene) for daily instrument calibration. This would replace the procedure of using a standard mixture of target compounds (25-35). This is of particular advantage because the standard mixture may not have all species stable or may show loss of some components relative to others due to wall adsorption in the standard (compressed gas) stainless steel cylinder.

The use of a single standard species was made possible by developing "accurate" relative response and calibration factors of all …

Investigations Into Rates And Mechanisms Of Mercury Depuration In The Killifish, Fundulus Heteroclitus, Joanne A. Korpanty

Theses

Metallothionein (MT) and glutathione (GSH) have been shown in mammalian research to play a role in the sequestration and depuration of mercury. The sulfhydryl groups on both these peptides have a strong affinity for mercury, MT for Hg²⁺ and GSH for CH₃Hg⁺. In this study, killifish (Fundulus heteroclitus) were force-fed one piece of squid laced with labelled mercuric nitrate to give a final food concentration of 20 ppm ²⁰³Hg²⁺ and 0.03 -0.05 µg g-1 Hg²⁺ total dose. Most of the mercury, 84.1 ± 12.1% (mean ± standard deviation), is depurated within the …

Characterization Of Tdi-Hema Homopolymer Prepared Via An Immiscible Solvent System. Synthesis And Investigation Of Oligodichloroketene, Manuel Montero

Theses

The objective of this thesis has been divided in two parts.

The first part is subdivided into two areas. First a "Universal" calibration curve for gel permeation chromatography (GPC) was construc-ted using different molecular weight standards of PMMA and MMA-HEMA co-polymers. By measuring the viscosity of the different molecular weight solutions and calculating the Vr, (retention volume), from GPC data, plots of In [ η ] Mw against Vr and In Mw against Vr are obtained. These curves can be used to obtain the molecular weight of any linear (not crosslinked) copolymer by simple measurements of viscosity and GPC data. …

A Study Of Worker Motivation, Farid Uddin Ahmad

Theses

This thesis mainly deals with the motivation of the production managers, engineers, technicians and production workers. The purpose is to emphasize the need for providing due motivations to an important work group of the industry who are largely ignored. An attempt has been made to amply demonstrate the various techniques for worker motivation. As the study of standard motivational theories alone cannot solve the complex motivational problems, all possible efforts have been made to relate, integrate and blend the theories with actual applications in the organizations. All the relevant and important issues connected with worker motivation have been highlighted. Points …

The Effects Of Heavy Metals On The Chick Embryo Development, Yasmin Alibhai

Theses

The following is a research report on the effects of heavy metals on the avian embryo. A total of eight metals were used in the study. The metalE included were : cobalt, copper, indium, iron, manganese, molybdenum, arsenic and cadmium. A total of 800 eggs were used for the study. Salts of each of the metal were dissolved in physiological saline and injected into the air sacs of white Leghorn chick eggs. Dose levels varied with the metal to be tested. Control eggs were injected with an equivalent volume of saline (0.1 ml per egg). The eggs were injected on …

Microcomputer Applications In Construction Layout, P. Emeruwa Anyanwu

Theses

With recent trends in computer technology, its application to the construction industry is attracting more attention. The cost of owning computer was a primary reason for small and medium sized firms not adopting its use. With the advent of micro and minicomputers, the cost have dropped dramatically. Now one can purchase an Apple Computer (the monitor, keyboard, disk drive, and printer) at less than $3,000. This makes it possible for students like me (the poverty class) to afford to own one.

This thesis explores the powerful potentials of the microcomputer and its use as an aid in construction layout. Surveying …

Energy And Economic Analysis Of Alternate Total Energy Systems, Swaminathan Balakrishnan

Theses

The purpose of this study is to evaluate the Performance of Diesel engines, gas engines, and gas turbines when used in a Total Energy System. To begin with, the history of cogeneration was studied, current literature and texts reviewed and companies which deal with these engines or turbines were contacted. Electricity and gas tariffs were obtained from the P.S.E.&G. Co. It was decided to consider an apartment complex of approximately 200,000 ft² having peak heating and cooling loads of approximately 4.92 million Btu/hr and 2.93 million Btu/hr respectively for this analysis. The average electrical demand was 520 KW. Next …

Volatile Organic Pollutant Levels In Indoor Environments From The Use Of Kerosene Heaters, Kashinath Banerjee

Theses

The indoor air pollutant levels caused by use of kerosene stoves as sources of heat in residences is of increasing concern as the use of such heaters becomes more widespread. Emission of volatile organic. species (aliphatic hydrocarbons from hexane to dodecane, cyclohexane and aromatic species including benzene, toluene, ethyl benzene, m/p xylenes, o-xylene and styrene) from these devices were measured at different sites. The organic vapor samples have been collected by adsorption on Tenax GC, and quantitatively analyzed by thermal desorption into a high Resolution capillary column gas chromatograph. Mass spectral analysis was also conducted for qualitative identification of sample …

Successful Management Techniques For Introduction Of Computerized Systems In A Production Facility, Michael James Boyle

Theses

This thesis surveys the potential for introducing significant organizational change into a manufacturing environment which is undergoing large scale capital improvement.

The first portion describes both the organizational and technological barriers present at a specific manufacturing facility. The capabilities of a computer based process control system are detailed along with its ability to fulfill the employer's particular business needs.

The next portion details the work necessary to train both management and production operators, not only on how to use this computer based equipment, but also how they themselves must change their personal modes of thinking in order to carry out …

Risk Assessment For New Products In Office Automation, Dolores Ann Canale

Theses

As investors survey the industrial growth of technology for the late 1980's one area leading the range for large potential growth is the area of office automation. Though this area has been under heavy speculation by many large firms (such as IBM, AT&T and EXXON) for the pass ten years it still remains an unexplored market for many investors. The objective of this research paper is to study the risks companies. will face developing products for this horizon.

Investors believe that success in this area, as well as, many other areas of engineering rely in large measure on the willingness …

Deposition Of Suspension In Inclined Channels Due To The Effects Of Inertia, Gravity And Image Force, I-Hsi Chu

Theses

This investigation was made to determine the effect on the deposition of particle in an inclined parallel-plate channel due to the influences of image charge, viscosity, inertia and gravity. The flow considered was lamina, imcompressible and steady. The flow patterns considered were uniform and fully developed with symmetry about the axis of the channel.

The governing equations derived for a particle were based on Newton's Second Law of motion. Since the resulting governing equations are linear second order differential equations, Runge-Kutta algorithm is used to solve the problem and graphical techniques is used to interpret the results of the numerical …

Microcomputer Controlled Instrumentation System For Studies Of Metabolic Changes In Rats, Murat Dertlioglu

Theses

The system measures the respiratory exchange in rats in a controlled experiment. An interface unit provides data, received from several measurement instruments such as gas analyzers, an electronic flowmeters, electronic thermometer and an electronic hygrometer, to the computer. The data is gathered from different chambers in a multiplexed mode.

The computer samples the chambers sequentially and prints out the results and stores them on the disk. The sampling duration of each chamber and the number of the rats to be tested can be programmed. The system can perform experiments with twelve animals, in the following arrangments, either one group of …

Computer Based Instrumentation System For Measurement Of Cardiac Output In Small Animals, Prasad L. Gavaskar

Theses

The task of the instrumentation system is to measure cardiac output in animals like rats, dogs, etc. A thermal-dilution method is used for this purpose. The temperature change due to injection of saline is picked up by thermo-couple microprobes implanted in the blood-vessel. The signal after conditioning is fed to a data acquisition system controlled by a computer.

With the help of a computer it is thus possible to monitor and control an experiment on several animals. The computer can sample the chambers sequentially. The sampling cycle duration and frequency are programmable. The data is collected and processed to determine …

Automated Instrumentation System To Monitor Behavioral Experiments, Dilip S. Gokhale

Theses

An instrumentation system has been designed to monitor behavioral experiments on monkeys. This instrumentation system is capable of performing these experiments in an automated manner without any human intervention. It is capable of monitoring these experiments concurrently in six boxes. It exhibits several features that make it more versatile than previous instrumentation systems. It is also capable of storing the data generated on to a floppy disk and later transmitting it to the mainframe.

Another feature that makes it more versatile is the flexibility of the system. Presently it is configured to run experiments with variable interval schedules. However with …

Computer Simulation For Studying The Performance Of Plasticating Extruders, K. S. Govindaraju

Theses

A Computer program for simulation of a single screw plasticating extruder is presented. The computer program simulates the performance of different size extruders with various screw geometries for plasticating and pumping different thermoplastic resins. The simulation yields valuable information on the performance of an extruder for a variety of operating conditions. The simulation program provides a means of separating the effect of one variable at a time on the overall performance of the extruders.

Performance Modeling And Simulation Of Multiple Microcomputer Systems, Moorthy Narayana Hariharan

Theses

Multiple processor systems are the logical choice for applications demanding high computing power, throughput and reliability. Moderately coupled Multiple Microprocessor systems can be applied to a variety of applications demanding high performance. The structure of Multiple Microprocessor systems is examined. Various interconnection structures are analysed for performance comparisons.

Queueing theory is a powerful tool in modeling and analysing Computer systems. Queueing models are developed for popular Multiple processor interconnection topolog es like the Shared memory, Shared bus, Star and Loop configurations.

The usefulness of Digital computer Simulation techniques in estimating the performance of Multiple processor systems is demonstrated through a …

Finite Element Analysis Of The Behavior Of Foundations Over Cavities In Soluble Rocks, Borhan Huang

Theses

Soluble rocks contain sinkhole that affect the strength of the rocks. In designing foundations in and on these formation, the effects of cavities have to be taken into account. In this study, an axisymmetric formulation has been developed to study the behavior of circular footings over spherical cavities. Parametric studies have been conducted varying the sizes and locations of openings. An approximate procedure has been employed to generate the stiffness matrix of the system. Error analysis and convergence study of the results have been performed.

Modification Of A Heat Transfer Program (Stan5) To Account For Surface Roughness And Its Application To Aerodynamic Icing, Parthasarathy R. Iyengar

Theses

In order to be able to predict the local ice accretion rate or the icing profile on an airfoil, it is necessary that a suitable heat transfer coefficient model be availabIe. A computer program has been developed which is capable of predicting the local heat transfer coefficient for a typical two dimensional icing surface. Because of the charecteristics of an icing surface, an existing computer program (STAN5) has been modified to include the effects of the following surface roughness surface curvature and boundary layer transition.

The computer program for the heat transfer coefficient has then been used with an existing …

The Application Of The Finite Element Method To Plate Stress Analysis, Yao-Zong Jen

Theses

The finite element formulation of plane elasticity and plate bending is presented and is employed in the development of the formulation of element stiffness equations and structural stiffness equations. The basic relations used to derive the finite element equations for a solid continuum are also presented. The programming organization is summarized.

The computer program cited from TAYLOR has been used to solve the deep beam problem with triangular and rectangular elements and the SAP IV program has been used to solve the plate bending problems with quadrilateral elements. Problems solved are: (1) stress distribution at the midspan of a simply …

Computer Analysis Of The Stefan Problem In Cryosurgery, Dong Hyuk Kim

Theses

Numerical solutions for determining the freezing front location vs time relation in cryosurgery are obtained by utilizing the heat transfer computer program TRUMP, which employs the explicit finite difference algorithm. The probe geometries of rectangular, cylindrical, and spherical shape with one dimensional heat flow are selected for study. Internal heat generation is considered in cylindrical and sphe¬rical probe geometries, and the difference between the solutions with and without heat generation is discussed. To verify the correctness of the TRUMP solution, comparisons are made in the freezing distance vs time relation with the Neumann's solution and the implicit enthalpy method for …

Coupled Flexural And Torsional Vibrations Of Beams, Sang Hwan Kim

Theses

This thesis deals with the vibration of a beam whose flexural and centroidal axis are not coincident. The elementary bending- twisting theory is employed to derive the equations of motion, in which the effects of rotary inertia are added to the bending displacements and the effects of warping are added to the twist. Bending translation is restricted to one direction so that one bending equation is used instead of two. The equations of motion are solved by using the boundary value problem. The exact natural frequencies are found from the frequency equation , which is obtained from the condition that …

Tourist Development And Environmental Impact Of Future Airport Construction In Athens, Greece, Vasilios Michael Halkias

Theses

The present thesis is an overall study of the suitablility of the eastern region of the Attica Peninsula in Greece, for a Tourist Development. The future construction of the new International Airport of Athens within the region is a significant factor that has been taken into account for the study.

It also examines and projects the Environmental Impacts due to the Airport construction.

The description of the studied area is presented by maps and refers to the Environmental Inventory. This Inventory examines the Water Resources of the region, Topography, Land Uses, Transportation System, Air and Noise Quality, Archaeological Sites, Utilities, …

Intelligent Computer Decision Systems, Robert J. Heath

Theses

This paper demonstrates that the concepts developed through Artificial Intelligence research are applicable to computerized information systems; and that a system of expert problem solvers and natural language interfaces exhibiting characteristics of "intelligent behavior" offer several advantages over present-day, conventional database management designs. Development of the conclusion was accomplished after an analysis and assimilation of the current literature in the field of Artificial Intelligence and participation in university symposia concerning its application to the business environment. It is concluded that incorporating the notions of learning and creativity, common sense(heuristics), and self-awareness, intelligent computer decision systems will provide managers with : …

Decision Rules Applied To Spread Spectrum Signal Detection, Richard Jae Kim

Theses

Decision rules for detection of spread spectrum signals were investigated. For each decision rule, error and erasure probabilities were analyzed. The obtained data was used to plot PE vs Pe for constant signal-to-noise ratio (SNR). With the use of the probability of a word error curves the optimum threshold setting was found for a given SNR.

FSK (orthogonal signalling) and PSK (antipodal signalling) were considered for modulating the chips. When the PE vs Pe plots for FSK and PSK were compared, PSK performed better than FSK by a ratio of 6 dB.

Finally, analog and digital correlation of the received …

The Effects Of Feedback On Operator Performance In A Production Environment, Diane L. Knoll

Theses

The objective of this thesis and it's associated research is to analyze the positive effects of feedback in a production environment. The experimental data was collected at the Ortho Pharmaceutical Corporation in New Jersey and a subsidiary company, The J. T. Clark Company, in Illinois.

The experiments involved three types of feedback indirect feedback provided to a large group of packaging operators, direct feedback provided to a small group of temporary packaging operators in a training situation, and direct feedback provided to an entire workforce of operators performing dissimilar, but interrelated tasks.

The results of these experiments were consistent with …

The Detection Of Partial Discharges In Transformer Oil, Gerald J. Fitzpatrick

Theses

The level, meaning the number and the intensity Of partial discharges that occur in transformer oil per time period of applied pulse when a high voltage is applied can be used as a measure of the quality and remaining life of the oil. The level of partial discharges at a given applied voltage can be correlated with the degree of contamination of the oil by impurities such as water and conductive particles and can be used as an indicator of the proximity of the oil to breakdown. There are several approaches to the detection of partial discharges, e.g., acoustic measurements, …

The Dry Removal Process Of Sulphur Dioxide From Flue Gases Using Aluminum Oxide, Ching-Hwang Lu

Theses

Oxidation of sulfur dioxide to sulfur trioxide and absorption on aluminum oxide pellet as a mean of removing sulfur dioxide from flue gas was studied in a packed bed reactor at various temperatures, residence times, SO₂ inlet concentrations (ppm level), and particle sizes. Three different experiments were conducted: (i) sulfation with oxygen/ozone, (ii) sulfation with oxygen only in the presence of UV radiation ( 254 nm or 366 nm ), (iii) sulfation with oxygen only. In all the experiments substantial absorption of sulfur dioxide by alumina pellet was observed. Sulfation with oxygen/ozone give the highest absorption of SO_{2 …}

Behavior Of L-Shaped Reinforced Concrete Columns Under Combined Biaxial Bending And Compression, Amar Shah

Theses

Combined biaxial and axial compression for L-shaped reinforced concrete short columns is a common design Problem. Current code, provisions and the available design aids do not offer an insight into the determination of strength and ductility of biaxially loaded reinforced concrete column. An experimental and analytical investigation of the moment-deformation behavior of biaxially loaded L-shaped short columns were undertaken. Four 1/2 scaled specimens were tested till failure. Moment-curvature and load-deflection curves were developed from the experimental and the analytical results. The analytical results were obtained using a computer program developed by Hsu (1). From the investigation it is deduced that …

Behavior Of Tee-Shaped Reinforced Concrete Columns Subjected To Biaxial Bending And Axial Compression, Antoun Romanos Nader

Theses

The investigation deals with the effect of eccentric loading on the moment-curvature relationship of reinforced concrete tee columns.

The test program consisted of two series of tee-shaped reinforced concrete columns, loaded biaxially at constant angle from the principle axes. Their end conditions were assumed to be pinned-ended.

Loads, at constant rate, were gradually applied until failure. At each loading stage, measurements were made for the strains and deflections at the mid span section.

The experimental and theoretical results of the load- deformation and moment-curvature were compared and found that the analytical approach proposed by Hsu is applicable to irregular sections …

Acrylamide Effects On Nerve Terminal Enzymes, Christopher S. E. Marlowe

Theses

Acrylamide causes a peripehral neuropathy. The biochemical mechanism by which it does so is the subject of intense investigation. One of the principal hypotheses for this mechanism centers on acrylamide's ability to inhibit glycolysis. This study examines the effects of in vivo exposure to acrylamide on the enzymes of the nerve terminal particle, the synaptosome.

A method for measuring glycolytic enzyme inhibition in the synaptosome was developed. Acrylamide (500 mg/kg) was administered to rats intraperitoneally. Synaptosomes were prepared by the method of Dodd et al, and lysed by sonication. GAPDH activity and NSE concentration were measured. GAPDH inhibition measured in …