Engineering Commons^™

Low Energy Implantation Of Boron With Decaborane Ions, Maria Angela Albano

Dissertations

The goal of this dissertation was to determine the feasibility of a novel approach to forming ultra shallow p-type junctions (tens of nm.) needed for future generations of Si MOS devices. In the new approach, B dopant atoms are implanted by cluster ions obtained by ionization of decaborane (B₁₀H₁₄)vapor. Each B atom carries only ~9% of the cluster kinetic energy and the B dose per unit charge is 10 times larger than in the case of monomer ion beams. Thus, the problems of spacecharge, limiting the extraction and transport of low energy (< = 1 keV) beams of B⁺ ions, can …

A Conceptual Framework Of Cost/Benefit Justification For Ergonomic Projects To Reduce Musculoskeletal Disorders In The Workplace, Nitipong Boon-Long

Dissertations

A framework for justifying ergonomic projects to the overall cost savings is developed which estimates the extent of musculoskeletal disorders (MSDs) exposures to a specific industry. A cost structure is developed to estimate the investment needed for an ergonomics program and the costs related to MSDs problems including workers' compensation costs, work-related costs, and labor turnover costs. Data was adopted from sources including Bureau of Labor Statistics (BLS), the Healthcare Cost and Utilization Project (HCUP-3), and estimates suggested in OSHA's former Ergonomics Standard. Top fifteen manufacturing industries with the highest MSDs rates were selected to apply the framework. Results showed …

Scheduling Algorithms For High-Speed Switches, Jinhui Li

Dissertations

The virtual output queued (VOQ) switching architecture was adopted for high speed switch implementation owing to its scalability and high throughput. An ideal VOQ algorithm should provide Quality of Service (QoS) with low complexity. However, none of the existing algorithms can meet these requirements.

Several algorithms for VOQ switches are introduced in this dissertation in order to improve upon existing algorithms in terms of implementation or QoS features. Initially, the earliest due date first matching (EDDFM) algorithm, which is stable for both uniform and non-uniform traffic patterns, is proposed. EDDFM has lower probability of cell overdue than other existing maximum …

Fractionation & Segregation Of Suspended Particles Using Acoustic And Flow Fields, Nazhat Aboobaker

Dissertations

The fractionation of particles by size or by density has many applications in a variety of technologies. Decontamination and separation of fine sediments is useful in treating sediments. The application of acoustic standing wave fields for the fractionation and segregation of suspended particles was studied.

The above technology was implemented at the bench scale by building a Plexiglas chamber. Two ultrasound transducers were fixed to opposite sides of the chamber to generate the acoustic standing wave field. The technology was evaluated using silica dioxide (Si02) (1-5 ~tm) and silicon carbide (SiQ (5-20 ~tm) particle suspensions in deionized water. Due to …

2d And 3d Surface Image Processing Algorithms And Their Applications, Jianlin Gao

Dissertations

This doctoral dissertation work aims to develop algorithms for 2D image segmentation application of solar filament disappearance detection, 3D mesh simplification, and 3D image warping in pre-surgery simulation. Filament area detection in solar images is an image segmentation problem. A thresholding and region growing combined method is proposed and applied in this application. Based on the filament area detection results, filament disappearances are reported in real time. The solar images in 1999 are processed with this proposed system and three statistical results of filaments are presented.

3D images can be obtained by passive and active range sensing. An image registration …

An Investigation Of Centrifugal Blood-Cell Separation, Timothy Edward Roche

Dissertations

This dissertation investigated the centrifugal, batch separation of whole blood into subpopulations of red blood cells (erythrocytes) and white blood cells (leukocytes). Separations took place in a custom-built centrifuge (using a seal-less, anti-twisting feed/withdrawal system) containing, a 25-ml capacity separation chamber. The blood separation chamber had dart-shaped geometry in the radial plane and a constant depth in the axial direction. Separation experiments were performed on whole bovine blood at varying hematocrit, centrifuge speed, and batch duration. A small, companion study of whole human blood separation runs also were conducted; they concentrated on batch duration effect and achieved superior separations.

A …

Channel Estimation And Signal Enhancement For Ds-Cdma Systems, Kun Wang

Dissertations

This dissertation focuses on topics of Bayesian-based multiuser detection, space-time (S-T) transceiver design, and S-T channel parameter estimation for direct-sequence code-division multiple-access (DS-CDMA) systems.

Using the Bayesian framework, various linear and simplified nonlinear multiuser detectors are proposed, and their performances are analyzed. The simplified non-linear Bayesian solutions can bridge the performance gap between sub-optimal linear multiuser detectors and the optimum multiuser detector.

To further improve the system capacity and performance, S-T transceiver design approaches with complexity constraint are investigated. Novel S-T receivers of low-complexity that jointly use the temporal code-signature and the spatial signature are proposed. Our solutions, which lead …

An Experimental Study Of Dry Particle Coating : Devices, Operating Parameters And Applications, Michelle Ramlakhan Mohan

Dissertations

Dry particle coating, which mechanically coats fine guest particles onto the surfaces of larger host particles, without binders or solvents, is investigated. Several systems of host and guest particles are coated in different devices to study various aspects of dry particle coating. The devices used are Magnetically Assisted Impaction Coating (MAIC) device, Mechanofusion, and the Hybridizer.

MAIC is used to coat fine SiO₂ guest particles onto the surface of larger cornstarch and cellulose host particles. This is done to simultaneously improve the flowability of the host particles, as well as reduce their hydrophilicity. Dry particle coating is used to …

Modeling, Design And Scheduling Of Computer Integrated Manufacturing And Demanufacturing Systems, Ying Tang

Dissertations

This doctoral dissertation work aims to provide a discrete-event system-based methodology for design, implementation, and operation of flexible and agile manufacturing and demanufacturing systems. After a review of the current academic and industrial activities in these fields, a Virtual Production Lines (VPLs) design methodology is proposed to facilitate a Manufacturing Execution System integrated with a shop floor system. A case study on a back-end semiconductor line is performed to demonstrate that the proposed methodology is effective to increase system throughput and decrease tardiness. An adaptive algorithm is proposed to deal with the machine failure and maintenance. To minimize the environmental …

Transit Productivity Analysis In Heterogeneous Conditions Using Data Envelopment Analysis With An Application To Rail Transit, Manuel J. Martinez

Dissertations

This dissertation extends transit productivity analysis by developing a new method of Data Envelopment Analysis (DEA), the linear programming approach to productivity analysis. The new model analyzes productivity of transit working under heterogeneous operating conditions. It is named Two-Farrell DEA for it applies DEA in two stages, DEA (1), that calculates the productivity frontiers at given operating conditions and DEA (2), that uses inputs adjusted by multipliers calculated in DEA (l). The model Two Farrell DEA calculated productivity benchmarks for each rail transit agency and estimated its potential for higher revenue or lower expense improvement. Additionally, the results identify two …

Joint Source Channel Coding For Progressive Image Transmission, Minyi Zhao

Dissertations

Recent wavelet-based image compression algorithms achieve best ever performances with fully embedded bit streams. However, those embedded bit streams are very sensitive to channel noise and protections from channel coding are necessary. Typical error correcting capability of channel codes varies according to different channel conditions. Thus, separate design leads to performance degradation relative to what could be achieved through joint design. In joint source-channel coding schemes, the choice of source coding parameters may vary over time and channel conditions. In this research, we proposed a general approach for the evaluation of such joint source-channel coding scheme. Instead of using the …

Predicting Thermodynamic And Transport Parameters For Metal Contaminant Sorption To Hydrated Metal Oxides In Aquatic Systems, Paras Trivedi

Dissertations

Hydrated oxides such as HAO,'HFO, goethite, and BA40 are prevalent in soils and sediments as discrete particles or as coatings. These microporous oxides have large surface areas and high affmity for metal ions, and hence they act as both a sink and a source for anthropogenically released metal contaminants. To better understand risks posed by metals in the environment and to develop effective waste management programs, mechanistic models are needed to accurately predict their fate in soils and sediments.

To achieve this objective, sorption of metal ions Sr, Cd, Zn, Ni, and Ca to these oxides were studied with macroscopic …

Novel Multiuser Detection And Multi-Rate Schemes For Multi-Carrier Cdma, Pingping Zong

Dissertations

A large variety of services is [sic] expected for wireless systems, in particular, high data rate services, such as wireless Internet access. Users with different data rates and quality of service (QoS) requirements must be accommodated. A suitable multiple access scheme is key to enabling wireless systems to support both the high data rate and the integrated multiple data rate transmissions with satisfactory performance and flexibility. A multi-carrier code division multiple access (MC-CDMA) scheme is a promising candidate for emerging broadband wireless systems. MC-CDMA is a hybrid of orthogonal frequency division multiplexing (OFDM) and code division multiple access (CDMA). The …

Plasma Induced Damage To Si And Sige Devices And Materials, Wei Zhong

Dissertations

This thesis studied the plasma-induced damage to Si and strained Si_1-xGe_x, and the resulting change in device characteristics. The energetic particles (ions, electrons and photons) in plasma reactor present a potentially hostile environment for processing VLSI devices. An inductively coupled plasma (ICP) reactor was used to study its damage effects to thin gate oxides. Electrical characterizations by C-V, ramped voltage breakdown (RVB) and deep-level transient spectroscopy (DLTS) measurement, and x-ray photoelectron spectroscopy (XPS) analysis were employed to investigate the damages to thin gate oxides and Si/SiO₂ interface. The shift of flat band voltage, the reduction …

Designing Web-Based Adaptive Learning Environment : Distils As An Example, Lilian Cao

Dissertations

In this study, two components are developed for the Web-based adaptive learning: an online Intelligent Tutoring Tool (ITT) and an Adaptive Lecture Guidance (ALG). The ITT provides students timely problem-solving help in a dynamic Web environment. The ALG prevents students from being disoriented when a new domain is presented using Web technology. A prototype, Distributed Intelligent Learning System (DISTILS), has been implemented in a general chemistry laboratory domain.

In DISTILS, students interact with the ITT through a Web browser. When a student selects a problem, the problem is formatted and displayed in the user interface for the student to solve. …

Performance Analysis And Resource Allocation In Cdma Wireless Networks For Multimedia Services, Sebnem Zorlu

Dissertations

The proliferation of Internet and demand for wireless services necessitate large increases in capacity and data rates in order to support different multimedia services. Wireless systems will be required to support sources with a variety of traffic characteristics and quality of service requirements. This requires algorithms for admission control and resource allocation at the session, burst and packet levels. The purpose of this research is to develop and analyze optimal resource allocation strategies to maximize throughput of wireless systems with integrated services. Given the multimedia user requirements, the problem addressed can be formulated as a constrained optimization problem. The objective …

Immobilized Liquid Membranes For Facilitated Transport And Gas Separation, Anjaneya Sarma Kovvali

Dissertations

Separation and purification of gas mixtures is a major area of activity in chemical engineering. Gas separation using facilitated transport membranes has been the subject of considerable research for many years. Immobilized liquid membranes (ILMs) are an important class of facilitated transport membranes. Despite their potential to provide superior performance, they could not achieve commercial success so far due to their instability. Recent research addressed the issue of stability of ILMs by replacing water as the solvent successfully with glycerol. In the present thesis, the relevance of glycerol as an ideal solvent for developing stable ILMs is demonstrated using the …

Buffer Management And Cell Switching Management In Wireless Packet Communications, Jongho Bang

Dissertations

The buffer management and the cell switching (e.g., packet handoff) management using buffer management scheme are studied in Wireless Packet Communications.

First, a throughput improvement method for multi-class services is proposed in Wireless Packet System. Efficient traffic management schemes should be developed to provide seamless access to the wireless network. Specially, it is proposed to regulate the buffer by the "Selective- Delay Push-In (SDPI)" scheme, which is applicable to scheduling delay-tolerant non-real time traffic and delay-sensitive real time traffic. Simulation results show that the performance observed by real time traffics are improved as compared to existing buffer priority scheme in …

Microporous Polymeric Membranes Via Melt Processing, Chaiya Chandavasu

Dissertations

Novel ultraporous and microporous membranes from immiscible polymer blends were produced via melt processing and post-extrusion treatments. Polystyrene (PS)/polypropylene (PP) and poly(ethylene terephthalate) (PET)/polypropylene (PP) blend systems with different rheological properties were studied. The blends were first compounded in an intermeshing co-rotating twin-screw extruder and subsequently extruded through a sheet die to obtain the precursor films. These were post treated by uniaxial or biaxial deformation (100-500%) with respect to original dimensions to induce a microporous structure. The porosity is induced by drawing the precursor film at a temperature below the glass transition temperature (T_g) of the minor …

A Software System For Large-Scale Structural Optimization, Keith M. Macbain

Dissertations

This work is driven by recent developments in mathematical programming, the state-of-the-art of structural optimization, the spectacular performance of linear programming algorithms, and computer hardware developments which imply that applications of structural optimization might be used commonly in engineering design. Currently, there are few general purpose optimization routines available to the structural engineer and much of the work has addressed specific classes of problems. Further, there is little widespread use of the available routines, partly due to the large amount of familiarity one must have with the specific details of both the problem and the optimization method. In response, it …

Force And Effort Analysis Of Unfastening Actions In Disassembly Processes, Manuela Sonnenberg

Dissertations

Fastening is the process of connecting one or more parts together with the aid of fastening elements. Unfastening, the reverse of fastening, is the process of separating components from each other by removing or detaching fastening elements. So far, the unfastening process is not well understood, and the analysis about it is not very extensive.

However, the need for disassembly is currently increasing. First, parts have to be taken apart for service and repair, and secondly, for the recycling process. Therefore, there is a need to consider unfastening during the design process in order to enable efficient disassemblies.

The purpose …

Design Of Traffic Shaper / Scheduler For Packet Switches And Diffserv Networks : Algorithms And Architectures, Surong Zeng

Dissertations

The convergence of communications, information, commerce and computing are creating a significant demand and opportunity for multimedia and multi-class communication services. In such environments, controlling the network behavior and guaranteeing the user's quality of service is required. A flexible hierarchical sorting architecture which can function either as a traffic shaper or a scheduler according to the requirement of the traffic load is presented to meet the requirement. The core structure can be implemented as a hierarchical traffic shaper which can support a large number of connections with a wide variety of rates and burstiness without the loss of the granularity …

Structures, Intramolecular Rotation Barriers, And Thermodynamic Properties Of Methane And Ethylene Carbons Bonding To Two Unsaturated Groups : Ethylene, Acetylene, Phenyl And Carbonyl, Manish H. Gurbani

Theses

Enthalpy, ΔH_f°₂₉₈, entropy, S°₂₉₈ and heat capacities C_p(T) (300 ≤ T/K ≤ 1500) are determined for Methane, bi-phenyl (CCB2H2); Methane, phenyl-vinyl (CCBCDH2);Toluene, 1-formyl (CCBCOH2), Propyne, 3-phenyl (CCBCTH2); 1,4-pentadiene (CCD2H2); Propene, 3-formyl (CCDCOH2); Methane, di-formyl (CCO2H2); Propyne, 3-formyl (CCOCTH2); Methane, di-ethynl (CCT2H2); Ethene, bi-phenyl (CDCB2); 1,4 Butadiene, 3-phenyl (CDCBCD); Ethene, I-ethynl-l-phenyl (CDCBCT); 1,4 Butadiene,3-vinyl (CDCD2); 1,4 Butadiene, 2-ethynl (CDCDCT) and Ethene, 1,1di-ethynl(CDCT2) using density functional B3LYP/6-31G(d) calculation method. Molecular structures and vibration frequencies are determined at the B3LYP/6-31G(d) density functional calculation level. Evaluation of data from the isodesmic reactions results in ΔH_f° …

A Cad-Mlca Interface For Next-Generation Dfe Tools, Jun He

Theses

Environmental concerns and rising product disposal costs have pressed manufactures to make more environmentally friendly products and customers to use and dispose of them in an environmental responsive way. Thus the practice of Design for Environment (DFE) is becoming essential in today's industrial environment. Life Cycle Assessment (LCA) provides different ways for the environmental assessment of products. One critical step in performing lifecycle assessment of any product design is to collect design-related data. The common way based on manual input for traditional DFE tools is not only cumbersome and time-consuming but also error-prone.

This thesis presents the characteristics of a …

Propagation And Scattering Of Collimated Beam Wave In Vegetation Using Scalar Transport Theory, Michael Yu-Chi Wu

Theses

The scalar time-dependent equation of radiative transfer is used to develop a theory of pulse beamwave propagation and scattering in a medium character ized by many random discrete scatterers which scatter energy strongly in the forward scattering direction. Applications include the scattering of highly collimated millimeter waves in vegetation and optical beams in the atmosphere. The specific problem analyzed is that of a periodic sequence of Gaussian shaped pulses normally incident from free space onto the planar boundary surface of a random medium half-space, such as a forest, that possesses a power scatter (phase) function consisting of a strong, narrow …

A Novel Approach Towards Usability Studies For Visual Search Tasks In Graphical User Interface Applications Using The Activity Theory Approach, Tirthankar Sengupta

Theses

The field of Human Computer Interaction still strives for a generalized model of visual search tasks (icon search, menu search, text search, label search, search through hypertext and feature recognition). The existing models of visual search, in spite of being impressive, are limited under certain perspectives due to lack of generality. The thesis tries to provide a holistic approach for the modeling of visual search tasks in graphical user interfaces from the Activity Theory (AT) perspective with the aim of rendering a theoretical bridge between HCI and Psychology. A detailed review of literature from the variegated discipline contributing to the …

A Laboratory And Field Study Of The Attenuation Of Sound Intensity Using A Whistle As The Sonic Generator, Navneet Kumar

Theses

This study investigated the attenuation of sound intensity using a whistle as the sonic generator along with the detailed analysis of all the previous studies. Attenuation of sound in air studies were performed in Otto H. York Center for Environmental Engineering and Science at New Jersey Institute of Technology. Sound attenuation through air was measured by doubling the distance for each of five whistles. It was concluded that Whistle No.5 gives the highest sound intensity of 140.54 dB at a distance of 0.75 ft , the closest distance used for measurement, at a air flow rate of 7.5 SCFM. These …

Characterization Of The Dependant Pile Capacity In Glacial Deposits By Dynamic Load Tests, Upendra L. Karna

Theses

A study of the effects of time on axial pile capacity in glacial deposits is presented in this report. The dynamic and static load database test results of the Route 21, Viaduct Replacement project are studied and analyzed. In this project two sizes (18-inch and 24-inch dia.) of closed end pipe piles varying in length 100 to 150 feet driven through highly variable glacial deposits were utilized. Within a small reach the subsurface conditions and the behavior of pile capacity with time varied considerably. About 112 piles were tested dynamically by Pile Driving Analyzer. Restriking was performed on fifty-nine piles …

Silicon Based Ir Filters, Prakash Mokashi

Theses

The design and fabrication of silicon based IR (Infrared) filters for high-speed optical communication systems are the topic of this thesis. Its novelty is in two aspects: 1) Use of silicon wafers as an optical guiding medium; 2) Use of wafer bonding technique to attach two optical elements together.

The structure consists of two optical waveguides, the bus waveguide and the drop channel waveguide. A ring on top of these waveguides couples them in such a way that only one narrow spectral line is removed from the bus waveguides which propagates in the dropchannel waveguide. The assembly is fabricated using …

Partial Characterization Of Extruded Collagen Tubes With Varied Material Deposition And Orientation Based On Rotation Rate And Linear Draw Speed, Richard Peter Hoppe

Theses

This study established protocols for extrusion of collagen tubes from an extruder made by the ZOKO Corporation of Czechoslovakia. Using a viscous collagen base material, collagen tubes can be formed with changes in rotation rates from 0 rpm to 260 rpm and linear draw speeds from 383 mm/min to 1270 mm/min with a constant extrusion rate of 50 cm²/min. These tubes, with further research and treatment, can be used for various medical applications including vascular implants and nerve conduits.

Post-extrusion, chemical crosslinking of the collagen increased the cohesiveness and mechanical integrity of the tubes. Microscopic photographs confirmed higher …