Engineering Commons^™

On The Data Hiding Theory And Multimedia Content Security Applications, Litao Gang

Dissertations

This dissertation is a comprehensive study of digital steganography for multimedia content protection. With the increasing development of Internet technology, protection and enforcement of multimedia property rights has become a great concern to multimedia authors and distributors. Watermarking technologies provide a possible solution for this problem.

The dissertation first briefly introduces the current watermarking schemes, including their applications in video,, image and audio. Most available embedding schemes are based on direct Spread Sequence (SS) modulation. A small value pseudo random signature sequence is embedded into the host signal and the information is extracted via correlation. The correlation detection problem is …

Inelastic Seismic Behavior Of Stiffening Systems : Multi-Span Simply-Supported (Msss) Bridges, Alireza Yazdani-Motlagh

Dissertations

Stiffening behavior can result from interaction between a structure (base system) and its surrounding environment as in the MSSS bridge soil-structure interaction. In this study, three MSSS bridge cases are parametrically analyzed and their dynamic characteristics and behavior are presented and discussed. Later, for investigating stiffening behavior, a simplified stiffening model is introduced and an extensive parametric study with more than 367,000 analyzed cases is performed. In the parametric study, different stiffening parameters (i.e., stiffness, strength, gap size, and mass), 41 strong motion records, and several damage criteria are considered and effects of the stiffening parameters variations on the dynamic …

Computation And Control Of Flow-Induced Noise Behind A Circular Cylinder Using An Acoustic Analogy Approach, Sirivit Taechajedcadarungsri

Dissertations

The computational aeroacoustics (CAA) research, which focuses on predicting acoustics by means of advanced numerical techniques, has recently gained a great deal of progress. In most applications, the prediction of both the sound source and its far-field propagation is necessary as required by regulations. Recently, powerful computers and reliable algorithms have allowed the prediction of far-field noise through the use of Computational Fluid Dynamics (CFD) data as near-field sound sources. One of the most useful analytical methods, used for the computation of noise, is Lighthill's acoustic analogy. The latter will be used in the present study.

Lighthill's acoustic analogy, combined …

Renegotiation Based Dynamic Bandwidth Allocation For Selfsimilar Vbr Traffic, Zafer Sahinoglu

Dissertations

The provision of QoS to applications traffic depends heavily on how different traffic types are categorized and classified, and how the prioritization of these applications are managed. Bandwidth is the most scarce network resource. Therefore, there is a need for a method or system that distributes an available bandwidth in a network among different applications in such a way that each class or type of traffic receives their constraint QoS requirements.

In this dissertation, a new renegotiation based dynamic resource allocation method for variable bit rate (VBR) traffic is presented. First, pros and cons of available off-line methods that are …

Elementary, Pressure Dependent Model For Combustion Of C1, C2 And Nitrogen Containing Hydrocarbons : Operation Of A Pilot Scale Incinerator And Model Comparison, Chad Sheng

Dissertations

A 140000 BTU/hr pilot scale incinerator has been constructed, tested and run; and an online sampling train capable of taking in situ data has been established. The continuous on-line analytical instruments include a CO analyzer, an NO/NOx analyzer and an 02 analyzer. In addition, two gas chromatographs with flame ionization detector are used to determine CH4, C2H2 + C2H4 and total hydrocarbon concentrations. Typical operating conditions are at an average 02 concentration of 6 - 8 %. The NO concentration ranged from 100 - 200 ppm. Approximately I ppm of CH.4 is also present at steady state operations.

The kinetic …

Qos Routing Source Routing Problems And Solutions, Ye Tian

Theses

The notion of Quality-of-Service has been proposed to capture qualitatively or quantitatively defined performance contracts between the service provider and the user applications. Integrated network services are designed to support Quality-of-Service (QoS). One of the primary goals for the integrated network services is to find the paths that satisfy given QoS requirements, namely QoS routing. The challenging issue in this area is to route packets subjected to multiple uncorrelated constraints because the problem is inherently NP-complete. This thesis studies the source routing heuristic approaches that bring the time complexity down to the polynomial-time for the multi-constrained path (MCP) problem. A …

Introduction On Intrusion Detection Systems : Focus On Hierarchical Analysis, Ratna Bajaj

Theses

In today's fast paced computing world security is a main concern. Intrusion detection systems are an important component of defensive measures protecting computer systems and networks from abuse. This paper will examine various intrusion detection systems. The task of intrusion detection is to monitor usage of a system and detect and malicious activity, therefore, the architecture is a key component when studying intrusion detection systems. This thesis will also analyze various neural networks for statistical anomaly intrusion detection systems. The thesis will focus on the Hierarchical Intrusion Detection system (HIDE) architecture. The HIDE system detects network based attack as anomalies …

A Real Time Frequency Analysis Of The Electroencephalogram Using Labview, Rupal Patel

Theses

The use of the Electroencephalogram (EEG) for diagnosis of brain related diseases is becoming a popular technique in the clinical and research environment. To achieve accurate reading of EEG, signal representation and classification becomes extremely important. The goal of this project was to develop a basic software program for acquiring and online processing of the electrical activity recorded from the brain. A program was developed using the LabVIEW programming software by National Instruments. Basic hardware components recorded the EEG signal and a software component divided the data into delta, theta, alpha and beta bands in the frequency domain. Emphasis was …

Shear Behavior Of Reinforced Concrete Deep Beams Strengthened With Cfrp Laminates, Jon Erik Moren

Theses

Considerable research has been performed using CFRP plates bonded to normal reinforced concrete beams, the objective being to improve shear and flexural strength. However, very few tests have been performed on reinforced concrete deep beams with CFRP as shear reinforcement. The purpose of this experiment is to investigate the behavior of the deep beam in shear with various arrangements of Sika CarboDur laminates bonded to the sides. The beams were designed to be shear deficient with stirrups omitted, except at the supports and directly under the load. In total eight beams were tested, four with one-point loading and four with …

Attack Visualization For Intrusion Detection System, Mohammad A. Rabie

Theses

Attacks detection and visualization is the process of attempting to identify instances of network misuse by comparing current activity against the expected actions of an intruder. Most current approaches to attack detection involve the use of rule-based expert systems to identify indications of known attacks. However, these techniques are less successful in identifying attacks, which vary from expected patterns. Artificial neural networks provide the potential to identify and classify network activity based on limited, incomplete, and nonlinear data sources. Presenting an approach to the process of Attack visualization that utilizes the analytical strengths of neural networks, and providing the results …

Study Of The Trajectories Of Visually Guided Movement Of Unimanual And Bimanual Tasks, Deepthi Anand

Theses

Restitution of upper limb mobility following stroke is one of the major challenges facing clinicians in the country today. The complexity of performing skilled tasks with fine movements makes restitution of mobility all the more complex for rehabilitation specialists. Although several techniques have been evolved for, limited success with transfer of training from the clinical environment to functional performance clearly indicates a need for research and development in the area of upper extremity rehabilitation.

Bimanual coordination has recently surfaced as a novel and effective way to fast and lasting recovery. The success of bimanually coordinated training encourages a better understanding …

Mechanical Properties And Stress-Strain Behavior Of High Performance Concrete Under Uniaxial Compression, Pornchai Jiratatprasot

Theses

Many recent innovations in advanced concrete materials technology have made it possible to produce concrete with exceptional performance characteristics. High performance concrete (HPQ is defined as concrete that meets special performance and uniformity requirements that cannot always be achieved routinely by using conventional materials and normal mixing, placing, and curing practices. The importance of HPC to structural engineering is unquestionable. However, HPC is a relatively new material. Some results of research on conventional concrete are not entirely applicable. In this experiment, the main mechanical properties of HPC including compressive strength, modulus of elasticity, and Poisson's ratio were investigated and compared …

Thermochemistry Of Vinyl Alcohol And Vinyl Ether Radical And Kinetic Analysis Of Neopentyl Radical Reaction With Molecular Oxygen, Chol-Han Kim

Theses

Vinyl alcohols and ethers are important intermediates in low-temperature combustion processes, such as in the initial stages of combustion and in the atmospheric photochemical oxidation of hydrocarbons. Knowledge of the thermodynamic parameters for these species is central to understanding and predicting their reaction pathways, rate constants, and equilibrium constants. The rapid interconversion of conformers and the instability of vinyl alcohols and ethers lead to complexities in studies of these species.

In this work, enthalpy,ΔH°f 298, entropy, S°298, and heat capacities, Cp(T), are determined for vinyl alcohol and vinyl methyl ether and the radicals corresponding to loss of a H atom …

Hyperbolic Position Location Estimator With Tdoas From Four Stations, Sreeram Potluri

Theses

This thesis presents a detailed derivation of a set of equations needed to locate the three dimensional position of a mobile given the locations of four fixed stations (like a global positioning system (GPS) satellite or a base station in a cell) and the signal time of arrival (TOA) from the mobile to each station. From these derived equations, a synthesizable VHDL model was developed and simulated using IEEE numen*c_std package. All the inputs and outputs were described by 32 bit vectors. From the simulations, it was observed that in the best case the mobile position was off by I …

An Infrared Device To Measure The Eyeblink For The Study Of Classical Conditioning, Alka Patel

Theses

The classically conditioned eyeblink response is studied by various groups to study neurological functions. This is a form of associative leaming that has many features to help diagnose and learn about neurological diseases. Electromyogram traditionally is used to detect eyeblinks for this experimentation in human. However, EMG can be expensive and difficult to use. It involves the utilization of electrodes and produces only an indirect measure of eyelid closure. The goal of the project was to develop an infrared device to detect eyeblinks and replace the EMG. The project involved two major components, a hardware and a software component. The …

Development Of An Integrated Photonic Sensor For Monitoring Hazardous Organics, Dianhong Luo

Dissertations

In this study, an integrated photonic sensor has been designed and fabricated for the purpose of monitoring hazardous organics in the environment. The operation of the sensor is based on the principles of the Mach-Zehnder interferometry. The sensor consists of a patterned waveguide structure made of phosphosilicate core and silica cladding. LPCVD processes were developed to produce undoped cladding and doped core silicon dioxide films. Diethylsilane (DES), Trimethylphosphite (TMP) and oxygen were used as the precursors for the deposition process. The effects of the O₂/DES ratio and deposition temperature on the properties Of SiO₂ films were investigated. …

Buckling Of Composite Conical Shells Under Combined Axial Compression, External Pressure, And Bending, Youngjin Chung

Dissertations

Conical shells are extensively used in space crafts, robots, shelters, domes, tanks, and in machinery or devices (e.g. as Belleville washers). Thus, the design of minimum weight, maximum strength, stiffened conical (and cylindrical) shells under combined loads has long been of interest to designers. The objective of this study is to improve the strength of conical shells and reduce the weight of the structure. Buckling of composite conical shells subjected to combined axial loading, external pressure, and bending is investigated using energy and finite element methods. The conical shells have single and multiple layers, different cone angle, length, and radius. …

Arq Protocol For Joint Source And Channel Coding And Its Applications, Bin He

Dissertations

Shannon's separation theorem states that for transmission over noisy channels, approaching channel capacity is possible with the separation of source and channel coding. Practically, the situation is different. Infinite size blocks are needed to achieve this theoretical limit. Also, time-varying channels require a different approach. This leads to many approaches for source and channel coding. This dissertation will address a joint source and channel coding that suits Automatic Repeat Request (ARQ) application and applies it to packet switching networks. Following aspects of the proposed joint source and channel coding approach will be presented:

1. The design of the proposed joint source …

Evolutionary Polymorphic Neural Networks In Chemical Engineering Modeling, Li Gao

Dissertations

Evolutionary Polymorphic Neural Network (EPNN) is a novel approach to modeling chemical, biochemical and physical processes. This approach has its basis in modern artificial intelligence, especially neural networks and evolutionary computing. EPNN can perform networked symbolic regressions for input-output data, while providing information about both the structure and complexity of a process during its own evolution.

In this work three different processes are modeled: 1. A dynamic neutralization process. 2. An aqueous two-phase system. 3. Reduction of a biodegradation model. In all three cases, EPNN shows better or at least equal performances over published data than traditional thermodynamics /transport or …

Integration Of E-Business Strategy For Multi-Lifecycle Production Systems, Yanchun Luo

Dissertations

Internet use has grown exponentially on the last few years becoming a global communication and business resource. Internet-based business, or e-Business will truly affect every sector of the economy in ways that today we can only imagine. The manufacturing sector will be at the forefront of this change. This doctoral dissertation provides a scientific framework and a set of novel decision support tools for evaluating, modeling, and optimizing the overall performance of e-Business integrated multi-lifecycle production systems. The characteristics of this framework include environmental lifecycle study, environmental performance metrics, hyper-network model of integrated e-supply chain networks, fuzzy multi-objective optimization method, …

Saturation Routing For Asynchronous Transfer Mode (Atm) Networks, Jose Luis Ucles

Dissertations

The main objective of this thesis is to show that saturation routing, often in the past considered inefficient, can in fact be a viable approach to use in many important applications and services over an Asynchronous Transfer Mode (ATM) network. For other applications and services, a hybrid approach (one that partially uses saturation routing) is presented. First, the minimum effects of saturation routing are demonstrated by showing that the ratio, defined as f, of routing overhead cells over information cells is small even for large networks. Second, modeling and simulation and M/D/l queuing analysis techniques are used to show that …

High Solid Loading Aqueous Base Metal/Ceramic Feedstock For Injection Molding, Mohammad Behi

Dissertations

Increasing volume fraction of metal powder in feedstock provided lower shrinkage. Reduction of the shrinkage results in better dimensional precision. The rheology of the feedstock material plays an important role to allowing larger volume fractions of the metal powder to be incorporated in the feedstock forinulations. The viscosity of the feedstock inainly depends on the binder viscosity, powder volume fraction and characteristics of metal powder.

Aqueous polysaccharide agar was used as a baseline binder system for this study.The effect of several gel-strengthening additives on 1.5wt% and 2wt% agar gel was evaluated. A new gel-strengthening additive was found to be the …

Modeling And Experimental Validation Of A Single-Feed Semi-Batch Precipitation Process, Ernesto Uehara-Nagamine

Dissertations

Crystallization is a widely practiced unit operation throughout the chemical and pharmaceutical process industries. Despite its widespread application, crystallization still suffers a disproportionate number of process difficulties due to the complexity of the steps involved in the process. In particular, the final characteristics of the product are strongly affected by the mixing conditions during the process. The development of a validated modeling approach would be highly valuable for the successful prediction of the crystal characteristics under differing mixing conditions.

In the present work, the single-feed semi-batch precipitation process of barium sulfate in a stirred tank was experimentally studied and numerically …

Initial Hertzian Characteristics Of The Human Tooth As A Damage Tolerant Bio-Ceramic/Bio-Composite Bi-Layer, Ivory Camille Kilpatrick

Theses

The objective of this thesis was to investigate the Hertzian Contact response of human teeth and how the response behavior is related to that of model ceramic bi-layers (high modulus brittle ceramics on compliant substrates). Hertzian Contact is a blunt indentation method, which uses a hard spherical indenter to apply a normal compressive load. Clinical variables of masticatory (occlusal) force and cuspal curvature identify closely with the independent Hertzian variables of contact load and sphere radius [1]. This method offers insight into the role of microstructure and microstructure- sensitive mechanical properties. It was hypothesized that tooth damage modes and patterns …

Mechanical Design Of The Heater Used In Near Infrared Filter, Jun Ma

Theses

This thesis presents a design and analytical process in the application of the heater used in a near infrared filter working in Big Bear Solar Observatory, CA. The objective of the project is to achieve the physics parameters for the filter, which will be used in the observation of the solar activity.

The most important part of this design is to keep a relatively fixed temperature inside the oven-like heater. The reason is that optical properties of calcite (kind of filter in telescope) are pretty sensitive to a tiny disturbance on inside temperature. This was the biggest issue in this …

Dynamic Friction Of Uhmwpe Angular Compliant Bearing For Joint Implants And Machinery, Max Roman

Theses

The feasibility of a unique design of orthopedic- joint implant is investigated. The work focuses on the dynamic friction characteristics of a new joint. This unique design can be also useful in machinery involving oscillating motion similar to that of the hip joint during walking. An elastomeric layer bonded behind the rigid acetubular cup can be beneficial in improving the durability of prosthetic implants. Angular compliance offered by the elastomeric layer reduces relative sliding between the surfaces, lowers contact stresses by distributing pressure more evenly, and reduces the possibility of incongruent loading conditions caused by misalignment. The application of a …

Characterization Of Alpha And Beta Phases Of Tantalum Coatings, Anto Yohannan

Theses

Sputtered tantalum forms two phases - α and β. The α and β phases have distinctly different crystalline structures and properties. The structure and the causes of formation of the β phase are still being studied by researchers. This is a study to distinguish and characterize these two phases. Samples from Bennet Labs and NJIT were characterized using techniques such as SEM, EDX, XRF, XRD, TEM and XAFS. Samples deposited at NJIT were used for an experimental study on the conditions favoring the formation of the phases, by depositing tantalum on heated steel and silicon substrates, additionally TEM analysis was …

Encoding And Storage Components Of Verbal Working Memory As Revealed By A Factorial Design, An Fmri Study, Jason Steffener

Theses

In this fMRI study, the contributions of frontal and posterior brain regions to verbal working memory were investigated. A two-factor design with low and high memory load (2 and 5 letters) and short and long delay (4 and 12 secs.) as factors were used. Based on reports in the literature, we expect activity in the following frontal and parietal brain regions of interest (ROIs): Brodmann areas (BA) 6, 9, 46, 44, 45, 7 and 40. The analysis of collected flvM data involved image processing and statistical analysis methods including realignment, spatial normalization, spatial smoothing, temporal filtering, intensity normalization, statistical tests, …

Parametric Study Of Heavy Metal Partitioning In A Pilot Scale Incinerator Burning Simulated Municipal Solid Waste, Sukrut S. Thipse

Dissertations

Incineration is a combustion process used to convert toxic waste to benign gases and residue in presence of excess air. The products of the incineration process are bottom ash, fly ash and the flue gas. Most of the metal-based phases formed in incineration are toxic and their emissions need to be strictly controlled. Therefore, behavior of metal species during incineration must be well understood. Such understanding is possible based on the experimental identification of the metal phases formed in the waste combustion and determination of their concentration in various incineration products.

A pilot-scale incinerator of 140,000 Btu/hr capacity was constructed, …

Turbo Space-Time Coded Modulation : Principle And Performance Analysis, Dongzhe Cui

Dissertations

A breakthrough in coding was achieved with the invention of turbo codes. Turbo codes approach Shannon capacity by displaying the properties of long random codes, yet allowing efficient decoding. Coding alone, however, cannot fully address the problem of multipath fading channel. Recent advances in information theory have revolutionized the traditional view of multipath channel as an impairment. New results show that high gains in capacity can be achieved through the use of multiple antennas at the transmitter and the receiver. To take advantage of these new results in information theory, it is necessary to devise methods that allow communication systems …