Engineering Commons^™

Sparse Matrix Product Implementation On Field Programmable Gate Arrays (Epgas), Amit Mahendra Sheth

Theses

If dense matrix multiplication algorithms are used with sparse matrices, they can result in a large number of redundant calculations, as numerous elements in sparse matrices are zero valued, thus available resources and time may be wasted. The algorithm discussed here aims to take advantage of the sparseness of the matrices by multiplying only nonzero elements.

The NIOS development board from Altera is used for implementing the above algorithm. First a sequential program in the C programming language is downloaded onto the FPGA and run by the NIOS soft-processor. Then the same board is also used for a parallel implementation …

Implementation Of Cyclic Exercise Protocol On Two Study Groups - Aids And Insomnia, Ujwala G. Kalambur

Theses

Traditional exercise regimens are based on maintaining a prolonged increase in heart rate, followed by a single recovery period. The Cyclic Exercise Protocol is a novel protocol that is designed to create a series of parabolic waves of exercise and recovery. This study involves the implementation of this exercise protocol on two study groups namely AIDS and Insomnia. This exercise protocol involves short bursts of exercise lasting for 60 seconds or less followed by a period of complete aerobic recovery. The underlying principle of this exercise protocol is that rest, recovery and the body's natural rhythm are important to fitness …

Soft Fault Detection Using Mibs In Computer Networks, Sachin Arora

Theses

To improve network reliability and management in today's high-speed communication system, a statistical anomaly network intrusion detection system (NIDS) has been investigated, for network soft faults using the Management Information Base (Mm) traffic parameters provided by Simple Network Management Protocol (SNMP), for both wired and wireless networks. The work done would be a contribution to a system to be designed MIB Anomaly Intrusion Detection, a hierarchical multi-tier and multiobservation-window Anomaly Intrusion Detection system. The data was derived from many experiments that had been carried out in the test bed that monitored 27 MIB traffic parameters simultaneously, focusing on the soft …

Comparative Studies Of Network Traffic In Actual And Emulated Wireless Networks, Curtis Salley Jr.

Theses

Wireless networks are becoming more popular in all types of environments from home office, to business infrastructure, to mobile computing. As more of these networks flourish, so does the attraction for hackers. The thesis examines the bandwidth of wireless networks and the effects of intrusions in three different scenarios. First, it looks at a wireless network that is connected to a wired infrastructure. Next, the thesis examines a wireless ad hoc network and how bandwidth plays a valuable part in the communication with neighboring nodes. And finally, the thesis attempts to simulate a wireless network by using a bandwidth configuration …

Analysis Of Random Packing Of Uniform Spheres Using The Monte Carlo Simulation Method, Sai S. Tulluri

Theses

The study of random packing of spheres has had a long history. It particularly interests many researchers because randomly packed hard spheres exhibit some features of the properties of simple liquid, e.g. the packing density and the radial distribution. Many researchers have studied random packing both experimentally and also by using computer simulation.

Monte Carlo simulation method was used to generate random loose packing of hard spheres. Packing characteristics like packing density, radial distribution function, co-ordination, angular distribution and fabric tensor have been computed for this packing system.

The packing density for a system of 8000 particles with a diameter …

Process-Structure-Property Relationship Of A Mesogenic Bioerodible Polyarylate, Seung Uk Yoo

Theses

Polymeric biomaterials are artificially synthesized polymers designed for in-vivo use. The material must be characterized and should satisfy the requirements suitable in human bodies.

For the proper characterization of materials, it is essential to apply specific processes, analyze thermal and mechanical properties, and understand the process effect and the morphology. Thermal analysis is one of the most sophisticated and well developed techniques for polymer characterization. Turi [ 1 ] has explained about the thermal characterization of polymeric materials. Jaffe et al [2], in the chapters of characterization of fibers and films, emphasized the effect of the process history of a …

Discrete Element Simulation And Nonlinear Dynamic Analysis Of Particles In A Simple Lattice Structure, Liam E. Buckley

Theses

The study of particles interacting in lattice structures allows for insight into the complex interactions of granular flow, and the adaptation of such structures to mechanical apparatuses to handle the separation of bulk particulate matter. Applying methods of computer analysis to the interactions taking place within the particle-lattice system provides a particle level methodology to the study of the phenomenon taking place, as well as a stepping stone for future design of related devices.

A two prong approach is presented to the study of such particle-lattice systems. The first approach is composed of adapting an existing discrete element computer code …

Experimental Study Of Ignition Of Mechanical Alloy And Pure Metal Powders, Ruslan Mudryy

Theses

Mechanical alloys of Al Mg, AI Zr, Al Ti, Al Li, Al C, Al Mg H, B Mg, B Al, and B Ti were produced and tested for possible applications as high energy density additives to fuels, propellants, explosives, and incendiaries. These new materials are metastable, supersaturated, nanocrystalline solid solutions that include a base metal as a solvent and another component (metal or gas, e.g. hydrogen) as a solute. Phase changes occurring in such materials during ignition and combustion are expected to significantly affect both ignition and bum rates. This experimental program focused on the characterization of ignition kinetics of …

The Consolidation Analysis Of A Clay Layer In The City Of Belem Do Para, Brazil, John Bezerra Jr.

Theses

In this study, an analysis was done on a particular clay layer found in the city of Belem do Para, Brazil. Various soil tests were conducted including a consolidation analysis. Data were gathered and analyzed in order to obtain a better understanding of how the soil responds under certain loading conditions. There have been no previous studies done on this material and so when it has been encountered in the field geotechnical engineers provide the safest, but not necessarily best design method possible. In the case of large buildings, piles are driven past this material to competent sand. There have …

Shape Finding Of Fabric Structures Using Grid Method, Armin Bischof

Theses

Fabric structures can span large distances with a very low self-weight, which makes them very efficient for covering huge areas. They have attractive shapes and an appealing architecture. These properties make them very popular and they are used in many different kinds of buildings. Airports, stadiums and halls are typical examples where the use fabric structures is often recommendable.

Fabric structures are built mainly out of fabric and cables; two structural members that can only take tension stresses. Therefore these structural members must be prestressed in such a way that their shape can carry all loads that might affect the …

Data Recording And Analysis Of American Sign Language, Robert Michael Demarco

Theses

American Sign Language (ASL) is a form of communication that is used by the Deaf. It consists of hand shapes and gestures to express words and phrases. Translators on the market today consist of interpreting a simple form of ASL known as finger spelling. In order to develop a more effective translator, instrumentation was developed utilizing a Flock of Birds and Cyberglove system to record in hand shapes and movements in a LabVIEW environment. Experimentation done included reading in data and subjectively analyzing the data recorded for accuracy. Initial results have show that the instrumentation worked and data was recorded …

Fpga Implementation Of A Cholesky Algorithm For A Shared-Memory Multiprocessor Architecture, Satchidanand G. Haridas

Theses

Solving a system of linear equations is a key problem in the field of engineering and science. Matrix factorization is a key component of many methods used to solve such equations. However, the factorization process is very time consuming, so these problems have traditionally been targeted for parallel machines rather than sequential ones. Nevertheless, commercially available supercomputers are expensive and only large institutions have the resources to purchase them or use them. Hence, efforts are on to develop more affordable alternatives. This thesis presents one such approach.

The work presented here is an implementation of a parallel version of the …

Direct Simulation Of Electrorheological Suspensions Subjected To Pressure Driven Flow And Spatially Non-Uniform Electric Field, Arun Thankamony John Kadaksham

Theses

A numerical method based on the distributed Lagrange Multiplier method is developed for direct simulation of electrorheological (ER) suspensions subjected to pressure driven flows and spatially non-uniform electric fields. The flow inside particle boundaries is constrained to be rigid body motion by the distributed Lagrange multiplier method and the point-dipole approximation is used to model the electrostatic forces acting on the polarized particles. Simulations show that the particles move to the regions of high electric field when the value of β, the Clausius-Mossotti factor is positive and they move to the regions of low electric field when the value of …

Design Of An Fpga-Based Parallel Simd Machine For Power Flow Analysis, Tirupathi Rao Kunta

Theses

Power flow analysis consists of computationally intensive calculations on large matrices, consumes several hours of computational time, and has shown the need for the implementation of application-specific parallel machines. The potential of Single-Instruction stream Multiple-Data stream (SIMD) parallel architectures for efficient operations on large matrices has been demonstrated as seen in the case of many existing supercomputers. The unsuitability of existing parallel machines for low-cost power system applications, their long design cycles, and the difficulty in using them show the need for application-specific SIMI) machines. Advances in VLSI technology and Field-Programmable Gate-Arrays (FPGAs) enable the implementation of Custom Computing Machines …

Graphical User Interface For Improved Laser Eye Surgery, Venkata K. Kuruganti

Theses

This thesis develops a system for laser eye surgery that is a significant improvement over existing technology. The new system uses image matching and MEMS micromirrors to introduce feedback control, automation and record keeping to the laser surgery process, eliminating the unwanted effects of eye movement during surgery and introducing a wide range of other benefits. It is expected that this improvement can be implemented as an addition to existing systems as well as a foundation for new tools, perhaps even remote, internet enabled ones.

The basic components of the new system are described and demonstrated, including image matching between …

Optimization Of Very Early Strength Concrete Mixes Using Maturity Method, Sun Punurai

Theses

Fast track concrete technology has been used over the past two decades for overnight highway repairs. Originally, fast track was concerned only with rapid strength gain and workability but little concern was paid to cost and durability of the concrete.

The purpose of this research study is to develop a current improved very early strength (VES) concrete mix, which was accepted by NJDOT in 1996. More than 50 concrete mixes were evaluated for strength, shrinkage, and curing rate (maturity), eventually leading to the development of an optimized VES concrete mix with improved performance characteristics.

The study has developed the new …

Intrusion Detection System For Ad Hoc Mobile Networks Using Neighborhood Watch Theory, Ramani Rajagopalan

Theses

This study describes several experiments to simulate and study temperature sensor networks. The ultimate goal of this study is to accurately predict a temperature sensor failure in a sensor network, using Network Neighborhood Watch theory. Simulated temperature measurements are used to compare the results of accuracy, and quickness in detecting a failure in a malfunctioning sensor node. This is done by changing the intervals between temperature sampling, by considering different rates of temperature raise, as well as varying the number of nodes in the network neighborhood (deployment density). The thesis studies the threshold for temperature sensor failure by computing a …

Reduction Of False Positives In Fault Detection System Using A Low Pass Data Filter, Ranjit Salunkhe

Theses

Network traffic is bursty in nature and exhibits the property of self-similarity, the degree of which is measured by the Hurst parameter. Now, in any network there is always the possibility of the occurrence of fault traffic that can be caused due to faults or malfunction of a network component. Fault Detection Systems that check for traffic anomalies can trigger off an alert on the detection of any traffic behavior that deviates from normal. Such deviation is usually caused when a fault occurs. But in network traffic sudden bursts may occur due to the inherent behavior of a network application. …

Tracking The Path Of A Mobile Radioactive Source Using A Wireless Sensor Network, Nipa Shah

Theses

This report describes several experiments used to characterize and test a network of radiation sensors. The purpose of these tests is to assess the feasibility of using these sensors to detect and track radioactive sources in a large field, as in a battlefield or on a military campus. Simulated radiation measurements are used to compare the result of radiation detection accuracy in tracking the moving target and to find its path as early as possible. This is done via changing the number of sensing nodes deployed (deployment density), as well as the models of the detectors. This thesis describes algorithms …

Low-Power Transceiver Design For Mobile Wireless Chemical Biological Sensors, Harshavardhan Reddy Sripuram

Theses

The design of a smart integrated chemical sensor system that will enhance sensor performance and compatibility to Ad hoc network architecture remains a challenge. This work involves the design of a Transceiver for a mobile chemical sensor. The transceiver design integrates all building blocks on-chip, including a low-noise amplifier with an input-matching network, a Voltage Controlled Oscillator with injection locking, Gilbert cell mixers, and a Class E Power amplifier making it as a single-chip transceiver. This proposed low power 2GHz transceiver has been designed in TSMC 0.35~lm CMOS process using Cadence electronic design automation tools. Post layout HSPICE simulation indicates …

Network Lifetime Extension, Power Conservation And Interference Suppression For Next Generation Mobile Wireless Networks, Amer Catovic

Dissertations

Two major focus research areas related to the design of the next generation multihop wireless networks are network lifetime extension and interference suppression. In this dissertation, these two issues are addressed.

In the area of interference suppression, a new family of projection multiuser detectors, based on a generalized, two-stage design is proposed. Projection multiuser detectors provide efficient protection against undesired interference of unknown power, while preserving simple design, with closed-form solution for error probabilities. It is shown that these detectors are linearly optimal, if the interference power is unknown.

In the area of network lifetime extension, a new approach to …

A Reactive Melt Modification Of Polyethylene Terephthalate, Rahul Ramesh Dhavalikar

Dissertations

This work investigates the structural and chemorheological modification of polyethylene terephthalate in the melt phase with low molecular weight multifunctional glycidyl compounds as reactive additives. Polyethylene terephthalate undergoes chain extension and/or branching reactions with the additives that result in modified rheological properties suitable for certain polymer processing operations such as extrusion blow molding or extrusion foaming to low densities.

Among five different low MW difunctional and trifunctional epoxy compounds, triglycidyl isocyanurate is shown to be an efficient reactive melt modifier for commercially available polyethylene terephthalate polymers. Its stability at the polyethylene terephthalate melt temperatures is confirmed offline through thermogravimetric and …

Joint Buffer Management And Scheduling For Input Queued Switches, Dequan Liu

Dissertations

Input queued (IQ) switches are highly scalable and they have been the focus of many studies from academia and industry. Many scheduling algorithms have been proposed for IQ switches. However, they do not consider the buffer space requirement inside an IQ switch that may render the scheduling algorithms inefficient in practical applications.

In this dissertation, the Queue Length Proportional (QLP) algorithm is proposed for IQ switches. QLP considers both the buffer management and the scheduling mechanism to obtain the optimal allocation region for both bandwidth and buffer space according to real traffic load. In addition, this dissertation introduces the Queue …

Acoustical Characterization And Parameter Optimization Of Polymeric Noise Control Materials, Emile N. Homsi

Dissertations

The sound transmission loss (STL) characteristics of polymer-based materials are considered. Analytical models that predict, characterize and optimize the STL of polymeric materials, with respect to physical parameters that affect performance, are developed for single layer panel configuration and adapted for layered panel construction with homogenous core. An optimum set of material parameters is selected and translated into practical applications for validation.

Sound attenuating thermoplastic materials designed to be used as barrier systems in the automotive and consumer industries have certain acoustical characteristics that vary in function of the stiffness and density of the selected material. The validity and applicability …

Numerical And Experimental Investigation Of Dry Particle Coating, Ajit Mujumdar

Dissertations

Dry particle coating is an emerging field in the industries that deal with particulate products and powder processing. Compared to the widely reported experimental studies of the dry particle coating, the theoretical modeling of such processes is found to be less comprehensive. The work presented in this thesis is an attempt to fill this gap.

The first part of the dissertation aims at the numerical investigation of the hybridization system (Nara Machinery, Tokyo, Japan). The flow behavior of different materials processed in this device is analyzed using three-dimensional Discrete Element Method (DEM) as well as the computational fluid dynamics (CFD) …

Packet Data Communications Over Coded Cdma With Hybrid Type-Ii Arq, Seokhyun Yoon

Dissertations

This dissertation presents in-depth investigation of turbo-coded CDNIA systems in packet data communication terminology. It is divided into three parts; (1) CDMA with hybrid FEC/ARQ in deterministic environment, (2) CDMA with hybrid FEC/ARQ in random access environment and (3) an implementation issue on turbo decoding.

As a preliminary, the performance of CDMA with hybrid FEC/ARQ is investigated in deterministic environment. It highlights the practically achievable spectral efficiency of CDMA system with turbo codes and the effect of code rates on the performance of systems with MF and LMMSE receivers, respectively. For given ensemble distance spectra of punctured turbo codes, an …

Evaporating Crossflow Sprays In Gas-Solid Flows, Guangliang Liu

Dissertations

Injection of evaporating sprays into gas-solid flows is encountered in many engineering processes such as energy production industry and chemical industry. The phenomenon involves phase change, three-phase interactions, heat and mass transfer. All of these characteristics control the process efficiency, pollutant production and product quality. However, very limited studies are available on the evaporating spray jets in gas-solid flows, especially on the spray evaporation rate within a gas-solid medium. A combined study of experiments and theoretical analysis has been carried out here to investigate the fundamental mechanism of evaporating Crossflow spray jets in gas-solid flows.

In this study, in addition …

Study Of Vapor/Gas Permeation Using Thin Immobilized Liquid Membrane, Gordana Obuskovic

Dissertations

To improve liquid membrane selectivity and stability for removal of vapor and gases from a gas stream, a thin immobilized liquid membrane (ILM) has been studied. Low vapor pressure liquid solvent/solutions were immobilized in part of the micropores of a hydrophilic, hydrophobic or ceramic hollow fiber substrate. To prepare such thin ILMs, three approaches were used: evaporation of the a volatile solvent; acrylic acid-grafted hollow fibers providing a thin hydrophilic layer; pressurization technique.

For removal of volatile organic compound (VOC), a thin ILM of silicone oil incorporated in the micropores of a hydrophobic hollow fiber with a silicone rubber coating …

Shear Strengthening Of Rc Beams Using Carbon Fiber Reinforced Polymer Laminates, Zhichao Zhang

Dissertations

Shear failure is catastrophic and occurs usually without advanced warning, thus it is desirable that the beam fails in flexure rather than in shear. Many existing reinforced concrete (RC) members are found to be deficient in shear strength and need to be repaired. Deficiencies occur due to several reasons such as insufficient shear reinforcement or reduction in steel area due to corrosion, increased service load, and construction defects. Externally bonded reinforcement such as Carbon Fiber Reinforced Polymer (CFRP) provides an excellent solution in these situations.

In order to investigate the shear behavior of RC beams with externally bonded CFRP shear …

Robust And Efficient Video/Image Transmission, Xi Min Zhang

Dissertations

The Internet has become a primary medium for information transmission. The unreliability of channel conditions, limited channel bandwidth and explosive growth of information transmission requests, however, hinder its further development. Hence, research on robust and efficient delivery of video/image content is demanding nowadays.

Three aspects of this task, error burst correction, efficient rate allocation and random error protection are investigated in this dissertation. A novel technique, called successive packing, is proposed for combating multi-dimensional (M-D) bursts of errors. A new concept of basis interleaving array is introduced. By combining different basis arrays, effective M-D interleaving can be realized. It has …