Engineering Commons^™

Solvent-Free Additive Manufacturing Of Electrodes For Li-Ion Batteries, Brandon Joshua Ludwig

Doctoral Dissertations

"A new Li-ion battery electrode manufacturing process using a solvent free additive manufacturing method has been developed. Li-ion battery electrodes consist of active material particles, a binder additive, and a conductive additive. Traditionally, Li-ion battery electrodes are manufacturing using the "slurry casting" technique. In this method, the electrode materials are mixed with a solvent to create a slurry. Electrodes fabricated in this method are readily implemented for small platforms, such as portable electronics. However, this method isn't as economically viable in large platforms due to high material and manufacturing costs. High material and manufacturing costs are mostly attributed to the …

Techno-Economic Optimization And Environmental Life Cycle Assessment Of Microgrids Using Genetic Algorithm And Artificial Neural Networks, Prashant Nagapurkar

Doctoral Dissertations

"This dissertation focuses primarily on techno-economic optimization and environmental life cycle assessment (LCA) of sustainable energy generation technologies. This work is divided into five papers. The first paper discusses the techno-economic optimization and environmental life cycle assessment of microgrids located in the USA using genetic algorithm. In this paper, a methodology was developed that assessed the techno-economic and environmental performance of a small scale microgrid located in US cities of Tucson, Lubbock and Dickinson. Providing uninterrupted power the microgrid was composed of seven components -- solar photovoltaics, wind-turbines, lead acid batteries, biodiesel generators, fuel cells, electrolyzers and H₂ tanks. …

Investigating Blast Fume Propagation, Concentration And Clearance In Underground Mines Using Computational Fluid Dynamics (Cfd), Raymond Ninnang Tiile

Doctoral Dissertations

"Blasting activities using standard industry explosives is an essential component of underground hard rock mining operations. Blasting operations result in the release of noxious gases, presenting both safety and productivity threats. Overestimation of post-blast re-entry time results in production losses, while underestimation leads to injuries and fatalities. Research shows that most underground mines simply standardize post-blast re-entry times based on experiences and observations. Few underground mines use theoretical methods for calculating post-blast re-entry time. These theoretical methods, however, are unable to account for the variations in the blasting conditions. Literature review shows that: (i) there is currently no means of …

Building Shared Knowledge For Eor Technologies: Screening Guideline Constructions, Dashboards, And Advanced Data Analysis, Na Zhang

Doctoral Dissertations

"Successful implementation of enhanced oil recovery (EOR) technology requires comprehensive knowledge and experiences based on existing EOR projects. EOR screening guidelines and EOR reservoir analog are served as such knowledge which are considered as the first step for a reservoir engineer to determine the next step techniques to improve the ultimate oil recovery from their assets. The objective of this research work is to provide better assistance for EOR selection by using fundamental statistics methods and machine learning techniques.

In this dissertation, a total of 977 worldwide EOR projects with the most uniformed, high-quality, and comprehensive information were collected from …

Underwater Acoustic Communications And Adaptive Signal Processing, Mohammadhossein Behgam

Doctoral Dissertations

"This dissertation proposes three new algorithms for underwater acoustic wireless communications. One is a new tail-biting circular MAP decoder for full tail-biting convolution (FTBC) codes for very short data blocks intended for Internet of Underwater Things (IoUT). The proposed algorithm was evaluated by ocean experiments and computer simulations on both Physical (PHY) and Media access control (MAC) layers. The ocean experimental results show that without channel equalization, the full tail-biting convolution (FTBC) codes with short packet lengths not only can perform similarly to zero-tailing convolution (ZTC) codes in terms of bit error rate (BER) in the PHY layer. Computer simulation …

Electrodeposition Of Epitaxial Metal Thin Films On Silicon For Energy Conversion And Flexible Electronics, Qingzhi Chen

Doctoral Dissertations

"This research focuses on epitaxial electrodeposition of two coinage metals: Au and Ag thin films on the silicon surface and their applications in flexible electronics and energy conversion and storage. The first paper: Photoelectrochemistry of ultrathin, semi-transparent, and catalytic gold films electrodeposited epitaxially onto n-silicon (111) describes the epitaxial electrodeposition of Au thin films on n-type Si using a simple HAuCl4 bath and the photoelectrochemical properties of the Au-Si junction barrier. The effect of the Au layer on the interfacial energetics as well as the stability of the photoelectrode as a function of the Au coverage/thickness is determined in a …

Efficient Estimation And Mitigation For Radio-Frequency Interference, Qiaolei Huang

Doctoral Dissertations

"With rapid innovations in Internet of Things (IoT) and wireless technology, more and more consumer electronic devices around the world are now connected to the internet. In a small form factor electronic device, there are plenty of potential noise sources such as System On Chip (SoC), high speed traces, flexible cables and power converters, etc. Those noise sources can possibly introduce radio frequency interference (RFI) issues. In this dissertation, a transfer function based calculation method is proposed to estimate radio frequency interference (RFI) problems. The derived equations can clearly decompose the RFI problem into two parts: the noise source and …

Using Lidar To Measure Subsurface Movement Of Slow-Moving Landslides And Study The Interaction Between The Soil And Lidar Scanning Targets, Chengxun Lu

Doctoral Dissertations

"Terrestrial Laser Scanning (TLS) technology has been used for predicting and researching geological hazards for two decades. This research focuses on using LiDAR (Light Detection And Ranging) to measure the slow-moving displacement of both surface and subsurface soil of landslides. Two kinds of computer simulation software, FLAC3D® and PFC3D® were used to simulate the landslide process to compare with the LiDAR scanning results.

The primary contributions from this research are as follows:

1. Several error tests were done to prove that the three-dimensional LiDAR scanner used in this research can precisely obtain the three-dimensional position, the displacement and the rotational …

Nanomorphology Dependent Optical And Mechanical Properties Of Aerogels, Chandana Mandal

Doctoral Dissertations

"Aerogels are very low density, light weight open pore materials. A hypothesis that is under intense current investigation by the scientific community states that the mechanical properties of nanostructured polymers depend on their nanomorphology. Aerogels are nanostructured ultra-lightweight nanoporous materials with skeletal frameworks that can display a wide range of nanomorphologies. Thereby aerogels comprise a suitable platform for testing not only that hypothesis but also a wide range of other properties such as light scattering for applications, for example, in thermally insulating windows.

To study the mechanical properties of nanostructured matter as a function of nanomorphology, various shape-memory polyurethane aerogels …

Polyurea Aerogels: From Nanoscopic To Macroscopic Properties, Tahereh Taghvaee

Doctoral Dissertations

"The morphology of a material is intrinsically a qualitative property and in order to relate nanomorphology to synthetic conditions, it is necessary to express nano/micro-structure quantitatively. In this context, polyurea aerogels were chosen as a model system with demonstrated potential for rich nanomorphology and being guided by a statistical Design-of-Experiments model, a large array of materials (208) with identical chemical composition, but quite different nanostructures were prepared. By reflecting upon the SEM images, it was realized that our first pre-verbal impression about a nanostructure is related to its openness and texture; the former is quantified by porosity (Π), and the …

Spatiotemporal Modeling And Model Restructuration Approaches In Studies Of Intracellular Signalling Pathways, Md Shahinuzzaman

Doctoral Dissertations

"The main focus of the research is to understand the complex phenomena of cell transduction pathways and cell biology in a single cell. Mathematical modeling and experimental evaluation are widely used approaches for this kind of research. Firstly, A multiscale framework for protein-protein interaction has been established using Brownian dynamics algorithm. Sit specific feature, steric collision, diffusion, co-localization and complex formation with time and space has been included in this spatial modeling framework. By implementation of the time adaptive feature in this framework, the computation time reduces in an order of magnitude compared with traditional modeling framework. This multiscale Brownian …

Multiscale Spatio-Temporal Modeling Of Cell Population In Tissue Architecture And Drug Delivery Nanoparticles, Mohammad Aminul Islam

Doctoral Dissertations

"Multiscale nature of a biological system span at many order of magnitudes in time and space. Molecular interaction at lower scale is connected with the higher scale behavior of tissue or organism. Integrating the dynamics and information at different time and space can give a fundamental physiological understanding of the higher level phenomena. But complex features, functions, interconnectivity between different scales and lack of information on the fundamental physiological property make the model difficult and computationally challenging. The multiscale modeling approach can bridge the gap between different scale by a systemic integration of the complex dynamic behavior.

Here, the focus …

Hydrodynamics Of Trickle Bed Reactors (Tbrs) Packed With Industrial Catalyst Using Advanced Measurement Techniques, Mohammed Jaber Al-Ani

Doctoral Dissertations

"The impacts of the packing characteristics on the hydrodynamics od a trickle bed reactor (TBR) have been investigated using advanced measurements techniques of Gamma-ray densitometry (GRD) and Optical fiber probe and conventional measurement techniques of high-frequency differential pressure transducer and load cell. Two different reactor sizes of bench and pilot plant scale were used. Bench-scale TBR carried out the experiments to assess phase distribution and catalyst utilization with 1.18 cm inside diameter and 72 cm length at ambient pressure and temperature. The mixture of catalyst and fine particles displayed considerable improvements in the phase distribution, liquid holdup profile, and catalyst …

Microstructural Evolution Of Zirconium Carbide (Zrcₓ) Ceramics Under Irradiation Conditions, Raul Florez

Doctoral Dissertations

A comprehensive understanding of the microstructural evolution of Zirconium Carbide (ZrC₂) ceramics under irradiation conditions is required for their successful implementation in advanced Gen-IV gas-cooled nuclear reactors. The research presented in this dissertation focusses on elucidating the ion and electron irradiation response of ZrC₂ ceramics. In the first part of the research, the microstructural evolution was characterized for ZrC₂ ceramics irradiated with 10 MeV Au³⁺ ions up to doses of 30 displacement per atom (dpa) at 800 ºC. Coarsening of the defective microstructure, as a function of dose, was revealed by transmission electron microscopy analysis. …

Development Of Stage-I Tempered High Strength Cast Steel For Ground Engaging Tools, Viraj Ashok Athavale

Doctoral Dissertations

"Ground Engaging Tools (GET) are the expendable replacement parts used in heavy machinery used with mining or construction equipment. GET’s protect the expensive machine components from the wear and tear found common in high-impact or high-abrasion environments. The goal of this project is to develop advanced next-generation alloy choices that outperforms the existing GET materials. A method of predicting tempered hardness of mixed microstructures was formulated. Using this model, two alloy series viz. Cr-Ni-Mo and Mn-Si-Mo-V were proposed and experimented with the goal of obtaining a high strength and impact resistant cast steel. Cast iterations of Cr-Ni-Mo alloy series were …

Investigating The Performance Of High Viscosity Friction Reducers Used For Proppant Transport During Hydraulic Fracturing, Mohammed Salem Ba Geri

Doctoral Dissertations

"Over the last few recent years, high viscosity friction reducers (HVFRs) have been successfully used in the oil and gas industry across all premier shale plays in North America including Permian, Bakken, and Eagle Ford. However, selecting the most suitable fracture fluid system plays an essential role in proppant transport and minimizing or eliminating formation damage.

This study investigates the influence of the use of produced water on the rheological behavior of HVFRs compared to a traditional linear guar gel. Experimental rheological characterization was studied to investigate the viscoelastic property of HVFRs on proppant transport. In addition, the successful implication …

Applications Of Machine Learning In Nuclear Imaging And Radiation Detection, Shaikat Mahmood Galib

Doctoral Dissertations

"The main focus of this work is to use machine learning and data mining techniques to address some challenging problems that arise from nuclear data. Specifically, two problem areas are discussed: nuclear imaging and radiation detection. The techniques to approach these problems are primarily based on a variant of Artificial Neural Network (ANN) called Convolutional Neural Network (CNN), which is one of the most popular forms of 'deep learning' technique.

The first problem is about interpreting and analyzing 3D medical radiation images automatically. A method is developed to identify and quantify deformable image registration (DIR) errors from lung CT scans …

Characterization Of A Green Electric Solid Propellant For Electric Propulsion, Matthew Scott Glascock

Doctoral Dissertations

"Electric solid propellants are advanced solid chemical rocket propellants that can be controlled (ignited, throttled and extinguished) through the application and removal of an electric current. These propellants are also being considered for use in ablative pulsed plasma thruster and multimode systems. In this work, the behavior and performance of a novel green electric solid propellant operating in an electrothermal ablation-fed pulsed plasma thruster was investigated. Using an inverted pendulum micro-Newton thrust stand, the impulse bit and specific impulse of the device using the electric solid propellant were measured for short-duration and long-duration runs to end-of-life, at energy levels of …

Deep Understanding Of Degradation In Lithium Ion Batteries Through Experimental And First-Principles Study, Yufang He

Doctoral Dissertations

"The growing interests in Lithium-ion Batteries (LIBs) have significantly accelerated the development of active materials. However, the key challenge is that electrode materials suffer from degradation, which include transition metal dissolution, solid electrolyte interphase (SEI) layer formation, and mechanical fracture. To address these issues, applying an ultrathin coating onto active materials via Atomic Layer Deposition (ALD) is an efficient way. Although numerious works have been done for active material performance improvement via ALD technology, the fundamental enhancement mechanisms of ALD coating on battery performance improvement are not yet known. Therefore, this dissertation consists of four papers, which focused on the …

Biofuel Supply Chain Restructuring -- An Economic Viability And Environmental Sustainability Investigation For Enhancing Second Generation Biofuel Adoption, Rajkamal Kesharwani

Doctoral Dissertations

"Biofuel is a promising clean alternative to fossil fuels. Currently, first generation biofuels are commercially produced by using corn grain as biomass feedstock. However, the use of edible matter of crops, may lead to a competition between food and fuel. Therefore, there is a significant push in both industry and academia to commercialize second generation biofuel manufacturing technology, which uses non-edible matter from crops. Most research focuses on individual manufacturing processes for producing second generation biofuel, but the economic and environmental impacts of a large-scale adoption of second generation biofuel manufacturing have been less widely reported.

This work investigates the …

The Mechanics Of Precision Presplitting, Anthony Joseph Konya

Doctoral Dissertations

"Precision Presplitting is a widely used method of presplit blasting for the mining and construction industries. In recent years considerable effort has gone into the development of empirical equations based on field data to be able to better design the Precision Presplit for various rock types and structural environments. However, the most widely discussed theory about the mechanics of the presplit formation, that of shockwave collisions, does not appear to be applicable for this method of presplitting.

This research has disproven this theory based on insufficient magnitude of the shockwave from modeling with basic wave mechanics. Other authors have suggested …

Multi-Body Dynamic And Finite Element Modeling Of Ultra-Large Dump Truck - Haul Road Interactions For Machine Health And Haul Road Structural Integrity, Bruno Ayaga Kansake

Doctoral Dissertations

"Haul truck capacities have increased due to their economies of scale in large-scale surface mine production systems. Ultra-large trucks impose high dynamic loads on haul roads. The dynamic loads are exacerbated by road surface roughness and truck over-loading. The dynamic forces also subject trucks to high torsional stresses, which affect truck health. Current haul road response models are 2D and use static truckloads for low capacity trucks. Existing 3D models consider the road as a two-layer system. No models capture the truck dynamic effects on haul roads and predict strut pressures during haulage.

Lagrangian mechanics was used to formulate the …

Design And Performance Of Fiber-Reinforced Concrete With Adapted Rheology For Construction And Repair Of Bridge Structures, Ahmed Abdelrazik

Doctoral Dissertations

“The objective of this document is to design high-performance fiber-reinforced self-consolidating concrete (FR-SCC) for infrastructure repair and fiber-reinforced super-workable concrete (FR-SWC) for bridge construction. The investigated fibers included propylene synthetic fibers, hooked steel fibers, double and triple hooked steel fibers, hybrid crimped steel fiber and polypropylene multifilament fibers, and micro-macro steel fibers. The fiber volume varied between 0 and 0.75%. An expansive agent (EA) was incorporated to compensate for shrinkage and induce compression in the concrete at early age. Two types of EA (G and K) were employed at 0 to 8%, by mass of binder. The investigated FRSCC and …

Feasibility And Assessment Of Using Recycled Rubber For Infrastructure Applications, Ahmed A. Gheni

Doctoral Dissertations

“The United States needs to mine billions of tons of raw natural aggregate each year. At the same time, millions of scrap tires are stockpiled every year. Therefore, replacing natural aggregate with recycled crumb rubber aggregate will be beneficial to the construction industry and environment. This research aimed to investigate the feasibility of using recycled rubber in new construction applications. Based on size, recycled rubber was selected to match its natural counterpart. Different ratios of recycled crumb rubber were used as a fine aggregate replacement in concrete masonry units (CMUs) where the rubberized units showed a lower unit weight, higher …

Design, Fabrication, And Characterization Of Functionally Graded Materials, Sreekar Karnati

Doctoral Dissertations

“The aim of this research was to investigate the feasibility of fabricating custom designed, graded materials using Laser Metal Deposition (LMD) that will cater for functionality and unconventional repair. The ultimate goal of the project is to establish the versatility of LMD for fabricating advanced materials and tackling problems that have been conventionally difficult or in cases infeasible. In order to accomplish these goals, this research involved investigations into, the feasibility of using elemental powders as modular feedstocks, the feasibility of fabricating tailored gradients with these custom compositions, and finally leveraging the advantages of grading materials using LMD to successfully …

Three-Dimensional Nanotube Arrays For Solar Energy Harvesting And Production Of Solar Fuels, Wipula P. R. Liyanage

Doctoral Dissertations

"Over the past decade extensive research has been carried out on photovoltaic semiconductors to provide a solution towards a renewable energy future. Fabricating high-efficiency photovoltaic devices largely rely on nanostructuring the photoabsorber layers due to the ability of improving photoabsorption, photocurrent generation and transport in nanometer scale. Vertically aligned, highly uniform nanorods and nanowire arrays for solar energy conversion have been explored as potential candidates for solar energy conversion and solar-fuel generation owing to their enhanced photoconversion efficiencies.

However, controlled fabrication of nanorod and especially nanotube arrays with uniform size and shape and a pre-determined distribution density is still a …

Nanoscale Solidification Of Metals By Atomistic Simulations: From Nucleation To Nanostructural Evolution, Avik Mahata

Doctoral Dissertations

"Homogeneous nucleation during solidification in Al (fcc), Fe (bcc) and Mg (hcp) is studied by million-atom molecular dynamics (MD) utilizing the second nearest neighbor modified embedded atom method (2NN-MEAM) potentials. Spontaneous homogenous nucleation from the melt was produced without any influence of pressure, free surface effects and impurities. We also study the effect on the simulation size on homogenous nucleation and the heterogeneity in homogenous nucleation. The heterogeneity in homogenous nucleation originates from the twins, grain boundaries and short range order in the liquid during the initial stages of solidification.

To study the solid-liquid coexistence in binary Al alloys, interatomic …

Plasmonic Metamaterial For Structural Color Printing And Spontaneous Emission Control, Wei Wang

Doctoral Dissertations

”Plasmon polaritons or plasmons are a collective oscillation movement of free electrons in metal at optical frequencies. The frequency-dependent complex dielectric function makes the metal property at optical frequencies behave totally different with that at other spectral ranges with lower frequency such as infrared and microwaves. This novel property makes the so called plasmonics or nanoplasmonics a rapid growing research field over the past few years. Many innovative concepts and applications have been developed such as perfect absorber, structural color printing, and quantum emitter spontaneous emission enhancement.

In this dissertation two of the most important applications will be addressed. The …

Intelligent Data-Driven Decision-Making To Mitigate Or Stop Lost Circulation, Husam Hasan Alkinani

Doctoral Dissertations

”Lost circulation is a challenging problem in the oil and gas industry. Each year, millions of dollars are spent to mitigate or stop this problem. The aim of this work is to utilize machine learning and other intelligent solutions to help to make better decision to mitigate or stop lost circulation. A detailed literature review on the applications of decision tree analysis, expected monetary value, and artificial neural networks in the oil and gas industry was provided. Data for more than 3000 wells were gathered from many sources around the world. Detailed economics and probability analyses for lost circulation treatments’ …

Plenum-To-Plenum Heat Transfer Characteristics Under Natural Circulation In A Scaled-Down Prismatic Modular Reactor, Salman Mohammed Alshehri

Doctoral Dissertations

“Gas-cooled reactor (GCR) is being developed under the Next Generation Nuclear Plant Program (NGNP) in nuclear engineering studies. As the world searches for an energy source with high energy density, clean, abundant, and storable nature to avoid global warming issues, GCR seems to be a promising solution, particularly the possibility of producing hydrogen. Studying and developing the safety analysis and GCR technologies are required for the optimum design and safety of GCR system. Multiphase Reactors Engineering and Applications Laboratory (mReal) at Missouri University of Science and Technology (S&T) has developed a natural convection heat transfer test facility with one riser …