Engineering Commons^™

Quality-Of-Service Architecture For Cloud Computing Networking, Ken R. Owens Jr., Steve Eugene Watkins

Electrical and Computer Engineering Faculty Research & Creative Works

Quality-of-service (QoS) performance is an important consideration for real-time and high-priority traffic on internet protocol (IP) networks. Service differentiation can provide a more efficient and customer-oriented internet. The “best-effort” internet models in use today cannot provide guarantees or service differentiation for end-to-end individual and aggregate data flows. Hardware-based models and software-based models do not completely address the total service-enabled solution. We propose a hybrid architecture that combines software and hardware features to handle network traffic with diverse QoS requirements. Since cloud providers leverage IP networks today, the model is based on a systems engineering approach that uses cloud computing technologies. …

Stress-State Dependency Of The Deformation Ratio Of Quasi-Elastic Granular Soils Under Cyclic Loading -- Supporting Information, Pingxin Xia, Longtan Shao, Wen Deng

Research Data

Poisson’s ratio, besides its transverse-axial strain ratio definition, also plays a significant role in traditional elastic theory as an elastic constant. However, this elastic role of Poisson’s ratio faces a challenge when applied to quasi-elastic granular soils. A so-called “deformation ratio” is therefore introduced and measured in this paper for quasi-elastic granular soils. With the same definition of the transverse-axial strain ratio as Poisson’s ratio, the stress-state dependency of the deformation ratio and the break-down of conversion relationship of elastic constants are investigated under cyclic triaxial tests. The results show that Poisson’s ratio is consistent with deformation ratio only in …

Contributions To The Performance Of Thin Film Capacitors For High Reliability Applications, Daniel Krueger

Doctoral Dissertations

"Capacitors are critical devices in microelectronic assemblies that must be incorporated into electronic systems through a variety of ways such as integrated or discrete devices. This work has developed new thin film capacitors deposited directly onto multichip module or printed circuit board surfaces to benefit from closer integration that enhances system performance for use in high reliability applications. The capacitors serve as filters or provide tuning and energy storage functions. Unexpected performance was observed during development that included low adhesion of the films to the substrates, higher effective dielectric constants than reported in literature, and low yields. Three publications resulted …

Gis And Remote Sensing Groundwater Potentiality Investigation Of Gulu District, Uganda Using Synthetic Aperture Radar And Magnetic Geophysics, Rachel Ann Jones

Doctoral Dissertations

“Developing countries have few resources for ground-based hydrological investigations to determine optimal placement of boreholes for community water access. Remote sensing data are available at a variety of resolutions and sense different parameters, and are useful inputs for hydrologic models, but these data are rarely obtainable in developing countries with the parameters or resolutions necessary for hydrologic applications. This research seeks to use and improve existing remote sensing and GIS techniques to identify areas of optimal water supply in locations with limited geologic or hydrologic information, such as Gulu District, Uganda. Fusing different remotely sensed data sets can produce higher …

Studies On Tornado-Structure Interactions And Guidance On Design Tornadic Wind Loading, Zhi Li

Doctoral Dissertations

“Tornadoes are violent natural hazards that could caused significant property loss and fatalities. Statistical data indicates that most fatalities during tornado incidents were caused by the building failure under tornadoes. For example, in the 2011 Joplin Tornado, 161 people were killed, and 84 percent of the fatalities were related to the failure of buildings. In addition, most of the significant, tornado-induced property loss and fatalities are relevant to the tornadoes passing through the densely populated regions. Besides buildings, bridges were also severely damaged or destroyed by tornadoes in the United States. To reduce the tornado-induced loss, it is imperative to …

Protection Of Modern Distribution Systems, Fahd Amin Hariri

Doctoral Dissertations

“Motivated by the potential for improvements in the electric distribution system’s protection schemes, this work examined the challenges facing protection schemes due to the integration of Distributed Generators (DGs). Traditional protection schemes for radial distribution systems were designed based on the unidirectional power flow from the source down to the loads. Protective devices typically use are overcurrent relays, autoreclosers, fuses, and circuit breakers. However, these protective schemes may no longer be sufficient to ensure correct operation in the new era of distribution systems integrated by DGs. This research investigated the impact of DGs that might mislead the protection schemes in …

Emi Characterization For Power Supplies And Machine Learning Based Modeling In Emc/Si, Jiayi He

Doctoral Dissertations

"Signal integrity (SI) and electromagnetic interference (EMI) are essential for consumer electronics and high-speed server applications. It is necessary to do EMI and SI modeling at the design stage. In this research, several modeling approaches for EMI and SI problems are proposed. By using measurement-based modeling method, the mechanism of conducted emissions (CE) on ac to dc power supplies in an LED TV is analyzed. A system-level transient simulation model is built to predict the conducted emission (CE). To characterize the equivalent dipole moment sources in RFI and EMI problems, a dipole source reconstruction method based on machine learning techniques …

Using Similitude Theory And Discrete Element Modeling To Understand The Effects Of Digging Parameters On Excavation Performance For Rubber Tire Loaders, Atta Ur Rehman

Doctoral Dissertations

"The large sizes of mining equipment pose challenges for analysis using experiments or simulation. While scaled physical and simulation models can address this challenge, no previous work has explored how similitude theory and modeling can provide valid analysis of large equipment such as rubber tire loaders. The objective of this research was to apply similitude theory and discrete element modeling (DEM) to study the effect of different digging parameters on the penetration and the draft on the buckets of rubber tire loaders. The work sought to (1) test the hypothesis that the geometry of a rubber tire loader bucket and …

Instrumentation, Modeling, And Sound Metamodeling Foundations For Complex Hybrid Systems, Natasha Amelia Jarus

Doctoral Dissertations

Many of our critical infrastructures, from power grids to water distribution networks, are complex hybrid systems that use software to control their non-trivial physical dynamics. These systems must be able to capably serve their purpose, while also being reliable, dependable, safe, secure, and efficient. Representation and analysis of these features requires the creation of several distinct models. These models may encode design goals or be derived from collected instrumentation data, reflecting both how a system ought to operate and how it does operate. It is essential to ensure that all of these models consistently and accurately describe the same system. …

Semi-Empirical Modeling Of Liquid Carbon's Containerless Solidification, Philip C. Chrostoski

Doctoral Dissertations

“Elemental carbon has important structural diversity, ranging from nanotubes through graphite to diamond. Previous studies of micron-size core/rim carbon spheres extracted from primitive meteorites suggest they formed around such stars via the solidification of condensed carbon-vapor droplets, followed by gas-to-solid carbon coating to form the graphite rims. Similar core/rim particles result from the slow cooling of carbon vapor in the lab. The long-range carbon bond-order potential was used to computationally study liquid-like carbon in (1.8 g/cm³) periodic boundary (tiled-cube supercell) and containerless (isolated cluster) settings. Relaxations via conjugate-gradient and simulated-annealing nucleation and growth simulations using molecular dynamics were …

Extracting Metallurgy Contaminants And Hydrocarbons Removing From Water And Industrial Wastewater Using Enhanced Emulsion Liquid Membrane With Nanoparticles And Ionic Liquid, Qusay Al-Obaidi

Doctoral Dissertations

It is an uphill battle to extract pollutants such as heavy metals, hydrocarbons, and radioactive metals from water and industrial wastewater. Emulsion liquid membrane (ELM) is an emerging technology that combines extraction/recover and stripping in one stage to extract/recover heavy metals and/or hydrocarbons from water and wastewater. ELM devised a way to clean up heavy metals and/or hydrocarbons from the water and wastewater where its primary chemicals can be recycled and reused.

In this work, the Emulsion Liquid Membrane (ELM) has been enhanced by adding nanoparticles and ionic liquid to significantly improve the recovery of the water-based contaminants of heavy …

Dynamic Behavior And Interactions Of Ferrofluid Droplets Under Magnetic Fields In Low Reynolds Number Flows, Md Rifat Hassan

Doctoral Dissertations

Digital microfluidics in combination with emulsion microfluidics are crucial building blocks of droplet-based microfluidics, which are prevalent in a wide variety of industrial and biomedical applications, including polymer processing, food production, drug delivery, inkjet printing, and cell-based assays. Therefore, understanding the dynamics and interactions of droplets as well as the interactions between the droplets and solid surfaces are of great importance in order to improve the performance or product in these applications.

Recently, several studies in the literature have demonstrated the potential of magnetic fields in controlling the behavior of droplets in microscale; however, the fundamental mechanism behind the interesting …

Experimental And Numerical Studies Of Novel Thermal Energy Storage Materials For Applications In Concrete And Energy Storage Systems, Wenyu Liao

Doctoral Dissertations

In this work, several types of novel thermal energy storage (TES) materials and composites are explored, and a series of numerical simulation models and experimental protocols are developed to evaluate the potentials of these materials to be applied in concrete, pavement, and thermal energy storage systems.

The first two types of novel TES materials/composites are at the micro-scale, which use micro diatomite (DE) and cenosphere (Ceno) as carriers of phase change material (PCM), respectively. The third type of novel TES material is at the macro-scale, utilizing lightweight sand (LWS) and lightweight coarse aggregate as carriers to load PCM. The last …

2020 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

A Time Series Sustainability Assessment Of A Partial Energy Portfolio Transition, Jacob Hale, Suzanna Long

Engineering Management and Systems Engineering Faculty Research & Creative Works

Energy portfolios are overwhelmingly dependent on fossil fuel resources that perpetuate the consequences associated with climate change. Therefore, it is imperative to transition to more renewable alternatives to limit further harm to the environment. This study presents a univariate time series prediction model that evaluates sustainability outcomes of partial energy transitions. Future electricity generation at the state-level is predicted using exponential smoothing and autoregressive integrated moving average (ARIMA). The best prediction results are then used as an input for a sustainability assessment of a proposed transition by calculating carbon, water, land, and cost footprints. Missouri, USA was selected as a …

Significance Of Reagents Addition Sequence On Iron Anionic Reverse Flotation And Their Adsorption Characteristics Using Qcm-D, Ying Hou, Ahmed Sobhy, Yue Wang

Mining Engineering Faculty Research & Creative Works

To explore the influence of reagents addition sequence of the pH regulator and the starch depressant on the anionic reverse flotation of iron oxide, flotation conditional experiments were performed on mixed low-intensity and high-gradient magnetic concentrates which is the flotation feed acquired from the iron processing plant. Besides, quartz crystal micro-balance with dissipative (QCMD) was conducted to detect the adsorption phenomena of the flotation reagent on iron oxide sensors at different addition orders. The outcomes showed that the flotation performance using the pH regulator prior to the depressant was the best. For example, at 1.6 kg/Mg starch dosage, the recovery …

Effect Of Temperature On Early‐Age Properties Of Self‐Consolidating Concrete Equivalent Mortar, Nima Farzadnia, Jing Pan, Kamal Khayat, Eric Wirquin

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this study, the effect of ambient temperature during casting on fresh properties, hydration kinetics, and early‐age compressive strength of self-consolidating concrete (SCC) was evaluated. Concrete equivalent mortars (CEMs) with water‐to‐binder ratios of 0.41 and 0.45 were cast based on SCC mixture designs for building and infrastructure construction and precast applications. The CEMs were prepared at temperatures ranging from 8 to 36°C. Superplasticizer (SP) and air‐entraining agent (AEA) demand were evaluated for the CEM mixtures made with different supplementary cementing material (SCM) and limestone filler types. Test results showed that the ambient temperature can significantly affect the SP and AEA …

Inter-Cross De-Modulated Refractive Index And Temperature Sensor By An Etched Multi-Core Fiber Of A Mzi Structure, Farhan Mumtaz, Yutang Dai, Muhammad Aqueel Ashraf

Electrical and Computer Engineering Faculty Research & Creative Works

We present a relative sensitivity of in-fiber inter-cross demodulation of a Mach-Zehnder interferometer (MZI) based on an etched multi-core fiber (eMCF). The sensor can measure the external refractive index (RI) and temperature with a large fringe visibility of 15 dB. It is tuned using a simple technique of slow chemical etching. When the outer cores of MCF will be exposed to the surrounding, a large difference of relative effective RI is observed, which enhances the sensitivity of the sensor. The sensor's wavelength and intensity responses have displayed that it can function with three different inter-cross-demodulation phenomena. A superior RI sensitivity …

Welcome Message From The Tpc Chairs, Ming Yu, Lijun Jiang, Alex Man Hon Wong, Shao Yong Zheng

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

Applying Power Dividers To Decoupling Of Mimo Antennas With Wideband, Dual-Band Or Adjacent-Band Operations, Min Li, Lijun Jiang, Kwan Lawrence Yeung

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a novel decoupling method of applying power dividers to isolation enhancement of multiple-input multiple-output antennas with wideband, dual-band, or adjacent-band operations. The decoupling structure consists of the power dividers, transmission lines, and reactive components. Three benchmarks are used to elaborate on the design procedure and demonstrate the advantages of the proposed method. Results show that this method offers good impedance matching and high port isolation at the designated frequencies.

Kron-Branin Model Of Braided Coaxial Cable Illuminated By Electromagnetic Wave, Ping Wu, Cui Meng, Zhifei Xu, Jun Fan

Electrical and Computer Engineering Faculty Research & Creative Works

This paper develops an innovative model of shielded coaxial cable illuminated by high power electromagnetic pulse. This Kron-Branin model is a flexible and efficient way of wave-circuit hybrid calculation, which is based on Branin's transmission line (TL) model and tensorial analysis of network (TAN). The traditional equivalent circuit is transferred into a topology graph consists of basic elements like nodes, branches, meshes, and cords. Electromagnetic and circuit equations can be derived and transferred according to the graph. The graph topology and equivalent transmission line equation of illuminated shielded cable structure is presented in this paper. A good correlation between the …

Ccfss Technical Bulletin Fall 2020, Vol. 21, Number 3, Wei-Wen Yu Center For Cold-Formed Steel Structures

CCFSS Technical Bulletins (1993 - 2020)

No abstract provided.

Ccfss Technical Bulletin Fall 2020, Vol. 21, Number 2, Wei-Wen Yu Center For Cold-Formed Steel Structures

CCFSS Technical Bulletins (1993 - 2020)

No abstract provided.

Ccfss Technical Bulletin Fall 2020, Vol. 21, Number 1, Wei-Wen Yu Center For Cold-Formed Steel Structures

CCFSS Technical Bulletins (1993 - 2020)

No abstract provided.

Wei-Wen Yu Center For Cold-Formed Steel Structures (1990-2020), Roger A. Laboube, Wei-Wen Yu

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

Final Report: Wei-Wen Yu Center For Cold-Formed Steel Structures

Commercial And Legal Considerations Of Offsite Construction Projects And Their Hybrid Transactions, Rayan Assaad, Islam H. El-Adaway, Makarand Hastak, Kim La Scola Needy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The commercial and legal challenges of offsite construction technology have become more pronounced with the ongoing rise and growing popularity of such construction method. Offsite construction represents a combination between construction services-based activities and manufacturing/fabrication goods-based tasks, thus called hybrid transactions. This mixed nature has created many uncertainties concerning whether the common law or the Uniform Commercial Code (UCC) shall govern. To this end, this paper aims to enhance the knowledge of the commercial and legal treatment of hybrid offsite construction transactions. To achieve that, this paper followed a research methodology that employs three types of analysis: Analysis of the …

Environmental Hygiene For Covid-19: It's All About The Mask, Daniel B. Oerther, Mona Shattell

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Innovative Approach To Repair Corroded Steel Piles Using Ultra-High Performance Concrete, Binod Shrestha, Ahmed Gheni, Mohanad M. Abdulazeez, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Steel H-piles are a common structural system in existing bridges. Many steel H-piles have been corroded as a result of severe weather and acid/alkaline salt exposures, causing a reduction in the axial load capacity. This paper experimentally investigates the use of ultra-high performance concrete (UHPC) encasement as a novel repair method for corroded steel H-pile. UHPC displays better tensile strength, early compressive strength, workability, and durability compared with conventional concrete. The proposed repair is used to bridge the corroded section in H-pile using either a cast-in-place or precast UHPC elements. A series of push-out tests was conducted on eight full-scale …

Experimental Evaluation Of Square Ferrocement Panels Using Polypropylene Wire Mesh, N. Khurram, U. Akmal, M. Raza, A. Hameed, M. Irfan Ul Hassan

Mining Engineering Faculty Research & Creative Works

Ferrocement panels are thin section comprised of hydraulic mortar reinforced with steel wire mesh and are susceptible to micro cracks at service conditions. The moisture and rainwater may infiltrate through these cracks and cause the reduction in capacity due to the corrosion of steel wire mesh. In the present study, a polypropylene (PP) wire mesh has been used to overcome this problem. The main objective of the study is to investigate the punching shear and bending capacity of the ferrocement panels using PP wire mesh. Experimental tests conducted on 32 simply supported square slabs panels of 450x450 mm subjected to …

Bond Behavior Between Steel Fiber Reinforced Polymer (Srp) And Concrete, Xingxing Zou, Lesley Sneed

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Steel fiber reinforced polymer (SRP) composite materials, which consist of continuous unidirectional steel wires (cords) embedded in a polymeric matrix, have recently emerged as an effective solution for strengthening of reinforced concrete (RC) structures. SRP is bonded to the surface of RC structures by the same matrix to provide external reinforcement. Interfacial debonding between the SRP and concrete is a primary concern in this type of application. This study aimed to investigate the bond characteristics between SRP and concrete determined by single-lap direct shear tests with different composite bonded lengths and fiber sheet densities (cord spacings). Specimens with medium density …