Engineering Commons^™

Effect Of Nonlinear Mixing On Electrospray Propulsion Predictions, Mitchell J. Wainwright, Joshua L. Rovey

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

The Effect Of Laser Welding Modes On Mechanical Properties And Microstructure Of 304l Stainless Steel Parts Fabricated By Laser-Foil-Printing Additive Manufacturing, Chia Hung Hung, Wei Ting Chen, M. Hossein Sehhat, Ming C. Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The success of laser-foil-printing (LFP) additive manufacturing depends critically on the laser welding of sheet metals onto the substrate or the previous layer during the part fabrication process. The welding can be generally categorized into two modes: conduction mode and keyhole mode. In this study, 304L stainless steel parts fabricated by the LFP process using the two laser welding modes are compared. The porosity, microstructure, and tensile properties of the fabricated parts in these two modes are measured and compared in the laser scanning direction (X) and part building direction (Z). The parts fabricated in the conduction mode have a …

Equilibrium And Kinetic Study On The Biosorption Of Trypan Blue From Aqueous Solutions Using Avocado Seed Powder, Tamer T. El-Idreesy, Omar Khoshala, Amin Firouzi, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

This research aims to investigate the removal of trypan blue dye from aqueous solutions by employing ground avocado seeds powder, a low-cost biowaste adsorbent (biosorbent), under various experimental conditions. The effect of contact time, initial dye concentration, and adsorbent dose on dye removal were studied. The experimental kinetic data were fitted to pseudo-first order and pseudo-second-order kinetic models. Results imply that adsorption of trypan blue on the avocado seed adsorbent nicely followed the pseudo-second-order kinetic model. Equilibrium isotherms were analyzed by Langmuir and Freundlich isotherms, where Langmuir isotherm described the isotherm data with a high-correlation coefficient (R2=0.9948) closer to unity, …

Electrospun Fiber Scaffolds For Engineering Glial Cell Behavior To Promote Neural Regeneration, Devan L. Puhl, Jessica L. Funnell, Derek W. Nelson, Manoj K. Gottipati, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Electrospinning is a fabrication technique used to produce nano-or micro-diameter fibers to generate biocompatible, biodegradable scaffolds for tissue engineering applications. Electro spun fiber scaffolds are advantageous for neural regeneration because they mimic the structure of the nervous system extracellular matrix and provide contact guidance for regenerating axons. Glia are non-neuronal regulatory cells that maintain homeostasis in the healthy nervous system and regulate regeneration in the injured nervous system. Electro spun fiber scaffolds offer a wide range of characteristics, such as fiber alignment, diameter, surface nano topography, and surface chemistry that can be engineered to achieve a desired glial cell response …

Subsumption Reduces Dataset Dimensionality Without Decreasing Performance Of A Machine Learning Classifier, Donald C. Wunsch, Daniel B. Hier

Chemistry Faculty Research & Creative Works

When Features in a High Dimension Dataset Are Organized Hierarchically, There is an Inherent Opportunity to Reduce Dimensionality. Since More Specific Concepts Are Subsumed by More General Concepts, Subsumption Can Be Applied Successively to Reduce Dimensionality. We Tested Whether Sub-Sumption Could Reduce the Dimensionality of a Disease Dataset Without Impairing Classification Accuracy. We Started with a Dataset that Had 168 Neurological Patients, 14 Diagnoses, and 293 Unique Features. We Applied Subsumption Repeatedly to Create Eight Successively Smaller Datasets, Ranging from 293 Dimensions in the Largest Dataset to 11 Dimensions in the Smallest Dataset. We Tested a MLP Classifier on All …

Data-Driven Identification Of Governing Partial Differential Equations For The Transmission Line Systems, Yanming Zhang, Lijun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

Discovering governing equations for transmission line is essential for the study on its properties, especially when the nonlinearity is introduced in a transmission line system. In this paper, we propose a novel data-driven approach for deriving the governing partial differential equations based on the spatial-temporal samples of current and voltage in the transmission line system. The proposed method is based on the ridge regression algorithm to determine the active spatial differential terms from the candidate library that includes nonlinear functions, in which the time and spatial derivatives are estimated by using polynomial interpolation. Three examples, including uniform and nonuniform transmission …

Decoupling Of Antennas With Adjacent Frequency Bands, Min Li, Lijun Jiang, Lawrence Kwan Yeung

Electrical and Computer Engineering Faculty Research & Creative Works

A decoupling device called cascaded power dividing decoupling network (C-PDDN) is presented for two antennas operating in adjacent frequency bands. Design formulas are derived to determine parametrical variables for high isolation. A prototype of a testing array consisting of two base-station dipole antennas is realized on a Rogers PCB for demonstration purposes. Simulated and experimental results show that good impedance matching, and high isolation are achieved simultaneously after adopting the C-PDDN.

Cyclic Sequential Adsorption Desorption/Thermal-Catalytic Oxidation Of Volatile Organic Compounds: Material Development, Process Advancement/Improvement, And Numerical Modeling, Simulation And Optimization, Busuyi Ojo Adebayo

Doctoral Dissertations

"Volatile organic compounds (VOCs) are a group of useful organic chemicals but when emitted have contributed to air pollution. They affect human health, cause environmental degradation and contaminate our waters and soils, so they need to be controlled. When they exist in dilute concentrations, abatement becomes challenging, thus requiring advanced abatement methods, e.g., sequential adsorption desorption/thermal-catalytic oxidation process. The overall goal of this research was to abate dilute streams of VOCs via the process. The specific objectives were to 1) develop novel adsorbent/catalyst dual-function materials (DFMs) for the process, 2) improve the operability of a one-bed-one-column reactor configuration for the …

Identification Of Neuromarkers Using Structural And Functional Neuroimaging, Sreevalsan Sanathanan Menon

Doctoral Dissertations

"One of the grand challenges in science is understanding the human brain. Recent advances in magnetic resonance imaging have opened unmatched opportunities to demystify neural circuitry. In this research, the spatially and temporally complex neuroimaging data were used to identify neuromarkers that aids in quantifying a brain’s health. In the first part, a comparison of static and dynamic functional connectivities was made to study their efficacies in identifying intrinsic individual connectivity patterns. Results show that the intrinsic individual connectivity pattern can be used as a ‘fingerprint’ to distinguish among and identify subjects and their biological sex and is more accurately …

Cooperative Navigation Of Small Satellites In The Deep Space Environment, Jill Christine Davis

Doctoral Dissertations

“The continued development of small satellites (SmallSats) has made them an increasingly viable mission alternative to traditional monolithic spacecraft. Constellations, swarms, and formations of these small spacecraft have the potential to fill unique gaps in the space systems architecture, while reducing overall mission costs and increasing mission redundancy. Cooperative navigation between spacecraft within swarms and formations is critical to mission success, but poses many challenges for SmallSats due to their size, mass, power, and computing constraints. While Earth orbiting missions can rely on GNSS data for high-accuracy inertial and relative navigation, deep space missions require new navigation techniques. In this …

Collaborative Planning In The Construction Industry: A Holistic Framework For Assessing Collaborative Planning Practices And Predicting Project Performance, Amr Elsayegh

Doctoral Dissertations

"The fragmentation of the construction industry prompted developing novel methods such as collaborative planning, lean construction, advancements in technology, integrated project delivery, and relational contracting. Current research focused on specific facets of collaborative planning without presenting a comprehensive analysis of its factors. As such, the goal of this research is to develop a holistic framework that studies and evaluates collaborative planning practices in construction projects. This research offers significant addition to the body of knowledge through various theoretical and practical contributions. In relation to that, this research developed a comprehensive framework by (1) identifying a comprehensive list of factors influencing …

Establishing Links Between Safety Culture, Climate, Behaviors, And Outcomes Of Long-Haul Truck Drivers, Carlton Washburn

Doctoral Dissertations

“This research examines the safety relationships between safety culture, safety influences, safety climate, and safety outcomes for long-haul truck drivers. The relationships focus on the intersection of the electronic logging device (ELD) technology, regulations, and truck drivers that fall into the lone-worker category. Truck drivers were interviewed to understand their beliefs, attitudes, practices, values, and behavior patterns aligned with the phase in of the ELD system. Large truck crashes during the same time period were analyzed to understand associations. Outcomes included both a safety culture and climate were established for long-haul truck drivers. Both positive and negative safety behaviors were …

In Vitro And In Vivo Response To A Novel Borophosphate Bioactive Glass, Nada Abokefa

Masters Theses

"Bioactive glasses have been widely used in several biomedical and tissue engineering applications since the late 1960s. Numerous families of bioactive glasses have emerged over the years, with each having its own advantage and disadvantage. One concern common to all families is that most bioactive glasses create a basic or acidic environment when degraded and, therefore, are toxic for cells. Recently, there has been an increased interest in borophosphate bioactive glass (BPBGs) because of their neutral pH, release of therapeutic ions, and biodegradable properties. Despite the growing interest, there is little reported on the bioactivity of BPBGs. The biological effects …

Relationships Among Mineralogy, Geochemistry, And Oil And Gas Production In The Tuscaloosa Marine Shale, Hayley Roxana Beitel

Masters Theses

"The Tuscaloosa Marine Shale (TMS) is an unconventional shale reservoir located in southeast Louisiana and southwest Mississippi. Limited mineralogical and geochemical data for the TMS have been published. The data that do exist indicate that the formation is heterogeneous. Consequently, previous investigators and oil and gas companies have not managed to effectively link mineralogical and chemical changes to oil and gas production in the TMS. These linkages are critical to establish for future exploration efforts. In this study, we attempt to establish these relationships by gathering all existing mineralogical and chemical data in the TMS, including newly acquired data from …

Analysis Of Refracturing Activities In The Major Shale Plays In The United States, Faisal Shammam

Masters Theses

"Refracturing of existing horizontal multistage wells has increased over the past decade in the oil industry. This work aims to investigate all the refracturing operations in the most active shale plays in the united states (Bakken, Niobrara, Marcellus, Permian, Eagle Ford, Barnett, and Haynesville) in terms of completion technique, candidate selection, treatment types, and refracturing production efficiency. To collect the data of the refractured wells, an advanced data analytics approach was applied to separate the refractured wells from 170,000 wells reported in FracFocus, a public chemical registry for hydraulic fracturing in the United States, and combine it with DrillingInfo database, …

Projectile Generator Design For Underground Coal Mine Seal Testing, Ethan Allan Steward

Masters Theses

"Underground coal mines have several dangers, one of the most hazardous of which is the possibility of an explosion caused by the ignition of methane gas. To reduce ventilation costs, coal mines have the option to close off abandoned areas that are no longer active with structural seals to keep an explosion from propagating into working areas of the mine. Though seals have been designed to resist the overpressure, none have been evaluated for their resistance to the impact of heavy objects. Underground explosions produce high velocity gasses that, traveling through mine openings, may propel objects in the mine at …

A Simple Background Elimination Method For Miniaturized Fiber-Optic Raman Probe, Bohong Zhang

Masters Theses

"Raman scattering is called a photonic - molecular interaction based on the kinetic model of the analytic. Due to the uniqueness of the Raman scattering technique, it can provide a unique fingerprint signal for molecular recognition. However, a serious challenge often encountered in Raman measurement comes from the requirements of fast, real-time remote sensing, background fluorescence suppression, and micro-environmental detection.

A new Miniaturized Fiber-Optic Raman Probe (MFORP) for Raman spectroscopy, used especially for eliminating background fluorescence and enhancing sampling, is presented. Its main purpose is to provide an overview of excellent research on the detection of very small substances and …

Optimization Of Transit Smart Card Data Publishing Based On Differential Privacy, Chenxi Chen

Masters Theses

“Privacy budget allocation is a key step of the differential privacy (DP)-based privacy-preserving data publishing (PPDP) algorithm development, as it directly impacts the data utility of the released dataset. This research describes the development of an optimal privacy budget allocation algorithm for transit smart card data publishing, with the goal of publishing non-interactive sanitized trajectory data under a differential privacy definition. To this end, after storing the smart card trajectory data with a prefix tree structure, a query probability model is built to quantitatively measure the probability of a trajectory location pair being queried. Next, privacy budget is calculated for …

Method Of Optimal Battery Scheduling With Optimal Battery And Photovoltaic Sizing, Gideon Hallman

Masters Theses

“Renewable energy generation is on the rise. One of the best ways to capitalize on this intermittent power supply is by using the renewable energy source in tandem with batteries. A joint photovoltaic (PV) and battery system model was created that implemented battery degradation and optimized battery usage using a Markov Decision Process (MDP). This system was then subjected to a series of tests to do a sensitivity analysis while optimizing the battery and PV sizing for the system at hand. Parametric sweeps of solar power and battery capital costs, the cost of energy taken from the grid, the cost …

A Physics-Based Pi Pre-Layout Tool For Pcb Pdn Design, Shuang Liang

Masters Theses

"With increasingly stringent requirements for lower voltage supply, and higher density in PCB PDN design, now integrity (PI) is an increasingly important aspect that must be considered. A pre-layout tool based on the Cavity Model and Boundary Element Method is built to automatically achieve a specified target impedance for a multi-layered Printed Circuit Board (PCB) Power Distribution Network (PDN) design with a minimal number of decoupling capacitors.

The pre-work about the post-layout design and analysis is proposed and the guidelines for creating a decoupling capacitors network with better performance has been built. With limit inputs, physical limitations for the minimal …

Design And Evaluation Of The 3d Printed Electromagnetic Absorber Built With Conductive Carbon-Filled Filament, Rui Mi

Masters Theses

"This research presents an application of the resistive frequency selective surface (FSS) fabricated with a 3D printed conductive material as an electromagnetic absorber for the EMI-reducing door. This solution allows to reduce radiated emissions of a router system. The resistive frequency selective surface has a three-layer structure. The top layer is a 3D printed FSS pattern, the middle layer is an air gap, and the bottom layer is a metal plane.

The first paper presents the methodology for manufacturing a frequency selective surface using the 3D printing technology, including the material characterization, design, fabrication, and evaluation.

The unpublished content presents …

The Effects Of Rigid Polyurethane Foam As A Confinement Material On Breaching Charge Detonations, Nathan Franz Paerschke-O'Brien

Masters Theses

"The effects of a rigid polyurethane foam used as a confinement material on four types of breaching explosives were tested, focusing on the changes in shockwave peak pressures, detonation load compression forces, and brisance cratering abilities. The Plate Dent testing procedure was modified to incorporate a load cell force sensor, and two air overpressure sensors were included adjacent to the blast to quantify each test result. The testing variables focused on the polyurethane foam cure times and thickness volumes around the breaching explosives to determine the breaching charges' optimal energy output capabilities when confined by the foam material. The rigid …

Early Wildfire Detection By Air Quality Sensors On Unmanned Aerial Vehicles: Optimization And Feasibility, Doaa Rjoub

Masters Theses

“Millions of acres of forests are destroyed by wildfires every year, causing ecological, environmental, and economical losses. The recent wildfires in Australia and the Western U.S. smothered multiple states with more than fifty million acres charred by the blazes. The warmer and drier climate makes scientists expect increases in the severity and frequency of wildfires and the associated risks in the future. These inescapable crises highlight the urgent need for early detection and prevention of wildfires. This work proposed an energy management framework that integrated unmanned aerial vehicle (UAV) with air quality sensors for early wildfire detection and forest monitoring. …

Transfer Function Measurement For Automotive Intentional Emi And Thermal Runaway Investigation Of Lithium-Ion Battery By Intentional Emi, Woncheol Song

Masters Theses

"With an increasing demand for electric vehicles and autonomous driving, many components of a vehicle are being replaced as electric components. This implicates the possibility of an increase in the malfunction of electric components due to unknown electromagnetic interferences. In this reason, malicious intentional electromagnetic interference (IEMI) is being considered as a growing threat for the current and next generation of automotive technology.

In the first topic, the transfer function between the IEMI attacker and the engine control unit (ECU) circuit in an automobile is extracted to analyze how the IEMI affects the vehicle.

In the second topic, to mimic …

Bond Graph Modeling Of Critical Infrastructures For Cyber-Physical Security Implementation, Michele Jane White

Masters Theses

“In developed societies, there exists infrastructure vital to everyday life. This includes water and power systems. Technology is quickly evolving and being implemented on these utilities. This technology can range from smart metering in neighborhoods to volume sensors in local waste water treatment facilities. When networking, sensing, monitoring, or control devices are integrated with infrastructure it is considered a cyber physical system, or CPS. When information about an important physical system is connected to the virtual world, it is opened up to security risks. Cyber security can be provided to the CPS by monitoring the physical state of the system …

Multiple-Site Fatigue Cracking Methodology To Assess Structural Integrity Of Aircraft Riveted Panels, Haroldo Chacon

Masters Theses

“Multiple Site Damage (MSD) is the most common source of Widespread Fatigue Damage (WFD) affecting structural integrity of aging aircraft fleets. Therefore, an understanding of its progression, the development of methods to prevent the onset, and the maintenance procedures precluding WFD are important to improve aircraft fleet longevity. A reliable and efficient numerical methodology to perform detailed Multiple Site Damage assessment in riveted structural joints was developed. A probabilistic methodology was employed in conjunction with Monte Carlo simulation technique; the fatigue initiation life at every potential crack initiation site was determined and initial damage scenarios were generated. Probabilistic crack growth …

Fabrication Of Silicon Nitride Parts By Ceramic On-Demand Extrusion Process, Sachin Choudhary

Masters Theses

“Ceramic On-Demand Extrusion (CODE) is a patented solid freeform fabrication method for manufacturing high-density monolithic ceramic parts. In the past 5-6 years, the technology has been successfully implemented to fabricate alumina and zirconia parts. The mechanical characterizations also show CODE’s high potential in achieving desired structural properties. The present study covers the fabrication of silicon nitride parts by CODE process, which entailed the design of paste formulation for achieving rheology suitable for dimensional control in fabricated parts and determining firing temperature and the content of sintering additives for silicon nitride green bodies fabricated by CODE. The density, hardness, and fracture …

Effect Of Spike Anchors On The Bond Behavior Of Steel Reinforced Polymer Composite Externally Bonded To A Concrete Substrate, Keenan Lorence Mcburney

Masters Theses

Steel reinforced polymer (SRP) composites are a strengthening material that consist of continuous high-strength steel cords embedded in a polymeric matrix. SRP has demonstrated a high potential for providing additional flexural and shear strength in existing concrete structures when bonded to the concrete surface. However, premature debonding from the concrete substrate at low load levels is a major shortcoming of SRP composites. It has been demonstrated in previous studies that anchors can limit the effect of debonding in fiber reinforced polymer (FRP) composites by increasing the load capacity and ductility of the composite-concrete interface.

This study aims to investigate the …

Physics-Based Modeling Of Lithium-Ion Batteries For Control And Estimation Applications, Brody J. C. Riemann

Masters Theses

“Lithium-ion batteries are extensively used in many application areas like consumer electronics, electric vehicles, and microgrids. As the world moves towards further electrification of vehicles and more widespread use of renewable energy sources, the need for large-scale battery storage systems will grow. To effectively replace conventional methods, batteries will need to be charged quickly while accounting for degradation to maximize lifetime. Further, larger batteries require more detailed safety monitoring, which is implemented using a battery management system (BMS). A BMS is responsible for state of charge (SOC) estimation, state of health (SOH) estimation, cell balancing, regulating voltage and current according …

Seed Modeling Of An Esd Gun Discharge To A Usb Cable, Yang Xu

Masters Theses

“An IC protected by a transient voltage suppression (TVS) diode may fail if the TVS device does not turn on or does not turn on quickly enough, causing the IC to take the full brunt of the electrostatic discharge (ESD) event. Transient simulation models have been developed for ESD protection devices for the purpose of system-efficient ESD design (SEED). The TVS modeling methodology has been improved to better represent the physics that occurs during the TVS response and more accurately predict the interactions between off-chip and on-chip protection devices. Moreover, a complicated test scenario -- an ESD gun discharge through …