Engineering Commons^™

“Arachne” (A Construction Method For Industrialized Housing), J. P. D. Kergueno

International Symposia on Low Cost Housing Problems

No abstract provided.

Modular Housing Systems Around The World And In The U.S. A., Nitin N. Shah

International Symposia on Low Cost Housing Problems

No abstract provided.

Increasing The Productivity Of Housing Development Corporations, Carol Van Astyne

International Symposia on Low Cost Housing Problems

No abstract provided.

A Place In The Sun, Arthur Monsey

International Symposia on Low Cost Housing Problems

No abstract provided.

Analysis Of Costs In Housing, John J. Huson

International Symposia on Low Cost Housing Problems

No abstract provided.

Earthquake Resistant Construction Features In Low Cost Buildings, A. S. Arya

International Symposia on Low Cost Housing Problems

No abstract provided.

Low Cost Housing: The Necessity Of Interdisciplinary Skills, Margaret K. Thorpe, Dwight D. Zeck

International Symposia on Low Cost Housing Problems

No abstract provided.

The Fe-Ho Binary System, G. J. Roe, Thomas J. O'Keefe

Materials Science and Engineering Faculty Research & Creative Works

The Fe-Ho phase diagram was determined on the basis of data obtained by X-ray diffraction, metallographic and differential thermal analysis techniques. Since emphasis was centered in the region where intermetallic compounds predominate, neither the iron nor holmium terminal regions were included in this study. Eutectic reactions were found to occur at 16.5 wt pct Fe and 875° C, 61 wt pct Fe and 1284° C, and 79 wt pct Fe and 1338° C. The congruent melting points of the compounds Ho6Fe23 and Ho2Fe17 were found to be 1332° and 1343° C, respectively. Two other intermetallic compounds were found, HoFe2 and …

Strength Of Bolted And Welded Connections In Stainless Steel, George Winter, S. J. Errera, B. M. Tang, D. W. Popowich

CCFSS Library (1939 - present)

INTRODUCTION In 1968 the American Iron and Steel Institute published the first edition of the "Specification for the Design of Light Gage Cold-Formed Stainless Steel Structural Members"(1)8, , based largely on research sponsored by AISI at Cornell University. (2) That Specification covers the design of members cold-formed from six common types of austenitic stainless steel in the annealed and strain flattened condition. Additional research has been underway at Cornell on austenitic Type 301 stainless steel in the 1/4 and 1/2 hard tempers, to determine the structural behavior of these higher strength materials(3), including the behavior of structural connections. The properties …

Rotating Cylinder Apparatus For Rarefied Gas Flow Studies, Darryl J. Alofs, George S. Springer

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A rotating cylinder type apparatus is described, suitable for determining drag in cylindrical Couette flow of rarefied gases, and for evaluating tangential momentum accommodation coefficients at gas-solid boundaries. The apparatus is equipped with a damping device using diffusion pump oil for eliminating undesirable oscillations in the system. Tangential momentum accommodation coefficients of argon on aluminum were determined with an accuracy of ± 2.5%. The results obtained indicate that the apparatus may be used over a wide pressure range, corresponding to free molecule and continuum flow conditions.

A Simplification Heuristic For Large Flow Tables, R. J. Smith, James H. Tracey

Electrical and Computer Engineering Faculty Research & Creative Works

Flow tables specifying large asynchronous sequential circuits often contain more internal states than are required to specify desired circuit behavior. Known minimization techniques appear unsuited for reduction of such large (rows X columns > 250) flow tables, because of excessive computation and intermediate data requirements for problems of this size. The algorithm described here is intended to rapidly produce a simplified-but in general non-minimal-flow table. It is most economical when applied to extremely large tables and was devised primarily for automated design applications. The procedure has been programmed in PL/1 and has been incorporated into an asynchronous sequential circuit design automation …

Electron Emitter Tips And Method, P. D. Ownby

Materials Science and Engineering Faculty Research & Creative Works

Boron is deposited on the (110) plane facet at the center of a tungsten electron emitter tip by chemical vapor deposition of boron triiodide. The emission current density is greatest in the center of the emitting area (FIG. 2).

Interior Corrosion Of Structural Steel Closed Sections, American Iron And Steel Institute

CCFSS Library (1939 - present)

A survey of light poles, water-tank stanchions, orthotropic deck bridges, marine tubular catwalks, davits and welded steel columns strongly suggests, contrary to some beliefs, that interior surfaces of closed steel sections rust but little in the atmosphere, even when not fully sealed. Only light rusting occurs because amounts of oxy'gen and water in entrapped air are limited and condensation necessary for rusting is infrequent. Computations based on the oxidation reaction taking into account inside surface, volume of entrapped air, relative humidity and air changes show that the loss of iron thickness due to such rusting is negligible. Use of closed …

Commentary On The 1968 Edition Of The Specification For The Design Of Cold-Formed Steel Structural Members, George Winter

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Proceedings Of The International Symposium On Low Cost Housing Problems Related To Urban Renewal And Development, Oktay Ural

International Symposia on Low Cost Housing Problems

PREFACE TO SECOND EDITION--We are very happy to have a second printing of the Proceedings of the First International Symposium on Low-Cost Housing Problems Related to Urban Renewal and Development. The rather quick and large demand of this publication proved to us, once more, the importance and timeliness of the concern on the topic of housing technology and production. The contributions from eighteen nations painted a real picture of housing conditions and needs around the world.

The fifty-one technical papers included in this volume have been selected intentionally in various aspects of housing to draw a complete and meaningful picture …

Column Research Council: Proceedings 1970, Column Research Council

CCFSS Library (1939 - present)

The purposes of Column Research Council are to study and discuss problems related to the stability and strength of metal compression members; to organize research in this field; to disseminate information; and to formulate design rules for consideration by specification-writing bodies. The activities of the Council in 1970 are summarized in this report. A particular feature is the Proceedings of the 1970 Annual Technical Session. As in the past, the rosters of members of the Council and the By-Laws are also included. The support and technical contributions of the members and investigators are sincerely appreciated. Those individuals and organizations that …

Effects Of Cold Work In Cold-Formed Steel Structural Members, S. J. Britvec, Alexander Chajes, K. W. Warren, Jairo Uribe, George Winter

CCFSS Library (1939 - present)

No abstract provided.

Influence Of Ductility On The Structural Behavior Of Light-Gage Cold-Formed Steel Members, A. K. Dhalla, George Winter, S. J. Errera

CCFSS Library (1939 - present)

Ductility parameters defined in the second progress report were previously obtained by conducting tension coupon tests on specially produced A and S steels. In this report, tension coupon test results are presented for a 20 gage commercial low ductility steel, i.e. an ASTM Grade E steel, herein designated as steel B. Its behavior is compared with that of the specially rolled A and S steels to test the validity of conclusions arrived at in the second progress report. Test programs were set up to study the behavior of B steel under static tension loading, one program for single bolted connections …

Case Study And Analysis Of A Low Cost Housing Project In An Urban Area In India, P. Purusothaman, Jawalker K. Sridhar Rao

International Symposia on Low Cost Housing Problems

An urban development project involving residential and school buildings as an extension of Madras city is described. The analysis of the project is made using the systems approach as a problem of human settlements. The methods adopted for efficient utilisation of space at optimal cost by functional planning, use of prefabricated units and use of new constructional procedures is described. The interrelationship between environmental, technical, social, cultural, psychological, economic, financial and management factors in making decisions for the project is discussed.

A Case For University Credits For Industry's In-House Continuing Education Programs, Robert E. Carlile

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The minerals industries have long recognized the tangible and intangible returns from continuing education programs for their technical scientific and administrative personnel. These programs originate from the mutual desires of the employer to upgrade the professional competence of the employee and the employee's concurrent desires to keep abreast of new developments to review the state of the art of specialized subjects and to better qualify himself to compete in an every changing technology. In-house training and continuing education programs to provide such review and education for the employee are becoming a recognized function of companies comprising this industry. These company-sponsored …

Initial Operation And Calibration Of The Umr Supersonic Axisymmetric Wind Tunnel, James Riley Murphy

Masters Theses

"Initial testing and a preliminary calibration were conducted in the UMR supersonic variable Mach number axisymmetric blowdown wind tunnel facility. During initial operations problems were encountered with control valve seat failure, control valve response and stability, and automatic operation. After having brittle fracture failures with seats made of nylon, Teflon and Telfon-copper composite, a copper seat was found to perform satisfactorily with minimal valve leakage. Control valve response and stability were greatly influenced by the setting of the needle valve located between the total pressure probe and the controller. The needle valve setting was observed to depend upon the stagnation …

Measurement Of The Surface Energy Of Rock By The Three-Point Bending Of Notched Beams, John Walter Corwine

Masters Theses

"In this investigation, the surface energy of a medium-grained igneous rock (Barre granite) was measured by breaking small, notched beams in bending. The technique was adapted from fracture toughness tests that have been used with metals and ceramics. The equations used for the calculation of surface energy were derived from several writers' equations for the stress intensity at the end of a notch in a beam subject to bending. Beam thickness, notch width and mineral occurring at the notch tip were evaluated for their influence on the calculated values of surface energy. The surface energy values obtained were used in …

Investigation Of The System Al₂O₃-Teo₂-O₂, Vera Zelenkova Sestak

Masters Theses

"The system Al₂O₃-TeO₂-O₂ has been investigated by X-ray diffraction and differential thermal analysis in air and in sealed silica ampoules. The tellurate, Al₂TeO₆, with tellurium in the +6 valence state, forms in air but not in vacuum at 1 mm pressure. A second phase, a tellurite, possibly Al₂Te₂O₇, forms in air or vacuum by devitrification. The glass-forming region is wider than previously stated and is more extensive in vacuum--from 50% to 98% TeO₂. Tentative phase boundaries have been placed for the system in air and vacuum"--Abstract, page ii.

State Assignment Selection In Asynchronous Sequential Circuits, Gary K. Maki, James H. Tracey

Electrical and Computer Engineering Faculty Research & Creative Works

Methods already exist for the construction of critical race-free assignments for asynchronous sequential circuits. Some of these methods permit the construction of many assignments for the same flow table. The algorithm presented here consists of two easy to apply tests which select that critical race-free assignment most likely to produce a set of simple next-state equations. The algorithm has been programmed. Copyright © 1970 by The Institute of Electrical and Electronics Engineers, Inc.

Development And Application Of Cartesian Tensor Mathematics For Kinematic Analysis Of Spatial Mechanisms, Robert Myrl Crane

Doctoral Dissertations

"The complexity of spatial mechanisms in themselves and the absence of an attractive analytical tool for their study has left this field of engineering analysis largely unexplored. In recent years several analytic methods have emerged. One of the most attractive of these is the tensor method. Literature surveys reveal that the tensor method is largely unexploited in the U.S.A., with regard to spatial mechanisms as well as simpler kinematic problems. The purpose of this work is to develop tensor mathematics for application to the kinematic analysis of spatial mechanisms. Methods are developed for position solutions and the determination of velocities …

Effect Of Axial Dispersion On Interphase Mass Transfer In Packed Absorption Columns, Virendra Kumar Mathur

Doctoral Dissertations

"A steady state approach was followed in this investigation to determine the effects of liquid and gas flow rates, packing size and packing height on the interphase mass transfer coefficient and gas phase axial mixing Peclet numbers. Experiments were performed on the absorption of carbon dioxide from a mixture of carbon dioxide and nitrogen in a packed column. Absorption was performed using 1/4, 3/8 and l/2 inch Raschig rings, with a packing height of 3 feet and also using 3/8 inch Raschig rings with a packing height of 5 feet. The liquid and gas flow ranges used were 2865 to …

Etch Patterns On Zone-Refined Fe, M. E. Straumonis, Chang-Soo Kim

Electrical and Computer Engineering Faculty Research & Creative Works

Upon dissolution of zone-refined Fe in strong acids, mainly three kinds of corrosion patterns were observed in the crystallites of the sections. Regardless of the acids, the {110} plane always appeared on the three patterns in the form of smooth and even steps, ledges, or facets. The {112}, {122}, and {123} planes were also developed but to a much lesser degree. The {100} and {111} planes were not observed because grains of the respective orientation were missing on the sections. Attempts were made to explain the formation of the planes by taking into consideration the reticular density of the planes …

Nuclear Radiation Enhancement Of Transistor Forward Gain At High Frequencies, C. A. Goben, Y. P. Han

Electrical and Computer Engineering Faculty Research & Creative Works

This investigation has characterized the effects of fast neutron bombardment on a typical n-p-n transistor (2N914) of a common emitter amplifier operating at high-frequencies (>100 MHz) by means of s-parameter measurements from 120 MHz to 350 MHz, inclusive, every 10 MHz. The changes in the four (4) s-parameters and the trends and consequences of neutron bombardment are examined pictorially on graphs. The general effect of fast neutron bombardment is to decrease the magnitude of each s-parameter for frequencies below z. fT (where z = (O/1013)0.1). However, if the device is operating above z fT, the magnitudes of s11 (input …

Neutron Dependence Of Neutral Base Region Recombination, J. Bereisa, C. A. Goben

Electrical and Computer Engineering Faculty Research & Creative Works

A discrete, deterministic mathematical model has been developed for the bulk base region of graded base devices that accounts for both the effects of neutron-induced recombination and built-in electric field in the base region at low, intermediate, and moderate current/injection levels. Exact expressions are developed for the bulk base recombination current and the collector current as functions of neutron fluence. Exact expressions are derived for the base recombination term and the relative rates of neutron-induced base current increase and collector current decrease. These expressions involve exponential and hyperbolic functions and are well suited for numerical computations and theoretical analysis. Damage …

Drag Reduction Correlations, Gary Kent Patterson, J. L. Zakin, J. M. Rodriguez

Chemical and Biochemical Engineering Faculty Research & Creative Works

No abstract provided.