Engineering Commons^™

Rubber Covered Rolls-The Nonlinear Elastic Problem, R. C. Batra

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The problem of the indentation of a rubberlike layer bonded to a rigid cylinder and indented by another rigid cylinder is analyzed. The rubberlike layer is assumed to be made of a homogeneous Mooncy-Rivlin material. The materially and geometrically nonlinear problem is solved by using the finite-element code developed by the author. Results computed and presented graphically include the pressure profile at the contact surface, stress distribution at the bond surface and the deformed shape of the indented surface. © 1980 by ASME.

A Survey And Analysis Of Electrical Engineering Curricula In Communications And Signal Processing, Rodger E. Ziemer, William H. Tranter

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

An Improved Technique For Calibrating And Testing Power System Generator Automatic Synchronizing And Speed Matching Relays, David C. Nagy, Earl F. Richards

Electrical and Computer Engineering Faculty Research & Creative Works

The design of a unique special purpose instrument for calibrating and testing power system automatic synchronizing and speed matching relays is described. The unit is constructed using inexpensive integrated circuit components and provides a direct digital readout of slip frequency from 0.05 Hz to 0.50 Hz resolution and advance angle from 0 to 99.9 degrees with 0.1-degree resolution. This device eliminates the need for expensive test equipment previously required, expedites the test procedure and solves the problem of referencing against a variable bus frequency source. Copyright © 1980 by The Institute Of Electrical and Electronics Engineers, Inc.

Thermally Stimulated Polarization And Depolarization Current (Tspc/Tsdc) In Glass, Chi-Ming Hong

Doctoral Dissertations

"The feasibility of studying ionic motion in glass using thermally stimulated polarization (TSPC)/depolarization current (TSDC) techniques was investigated with 4Na₂O·96SiO₂ and 30PbO·70SiO₂ (mol%) glasses. The TSDC peaks in these glasses were dependent on glass composition and attributed to bulk polarization. The high temperature background TSPC is shown to be due to dc conductivity, whereas the TSPC/TSDC peaks in the 4Na₂O glass are attributed to shorter range Na⁺ motion.

The electrical conductivity of glasses determined by TSPC agrees well with that measured by conventional ac or dc techniques. The TSPC technique is a rapid and easy method of measuring the …

Properties Of High Alumina Refractories After Exposure To Steam/H₂ Atmospheres, David W. Lang

Masters Theses

"Selected properties of a dense fired alumina, a phosphate-bonded ramming mix, and a calcium aluminate cement-bonded castable were evaluated after exposure at 260°C and 538°C to steam/H₂ atmospheres (2.58, 5.17, and 6.89) MPa. Chemical reactions in the refractories were determined by x-ray diffraction, DTA/TGA, and changes in physical properties. The modulus of rupture (MOR) of the dense alumina decreased with increasing steam pressure and degree of saturation. The calcium aluminate cement phases in the castable were most reactive in 260°C steam and formed several hydrated phases which generally resulted in a higher MOR. The MOR of the ramming mix …

A Study Of Mechanical Degradation Of A Coarse Aggregate Subject To Repeated Loading, Mark Alan Roenfeldt

Masters Theses

"This investigation concerns itself with the problem of mechanical degradation of a coarse aggregate and specifically as it is used as railroad ballast. Laboratory tests were used to study the aggregate with respect to its plastic deformation characteristics, the amount of degradation, changes in gradation, and the rate of change of degradation as a function of the number of load cycles.

The repeated load triaxial tests were used to study how degradation occurs with respect to aggregate gradation, relative density, and the number of load applications. The Los Angeles abrasion test was also used to determine the degradation of the …

The System Mgo‐Mgcl2‐H2o At 23°C, Ladawan Urwongse, Charles A. Sorrell

Materials Science and Engineering Faculty Research & Creative Works

Solubilities of MgO in aqueous HC1 solutions at 23°±3°C were measured and combined with analyses of neat magnesium oxychloride cements, cured in sealed containers, to construct an equilibrium phase diagram for the system MgO‐MgCl2‐H₂O. Specific gravities and acidities of solutions saturated with MgO and relative humidities of vapor phases over sealed samples were measured and combined with XRD data to define the compositions in equilibrium with two crystalline phases. Studies of relative reaction rates indicated that the 5–1–8 phase crystallizes more rapidly than the 3·1·8 phase and that cements near the 3·1·8 composition react rapidly with atmospheric CO …

Phase Relations In Magnesium Oxysulfate Cements, Ladawan Urwongse, Charles A. Sorrell

Materials Science and Engineering Faculty Research & Creative Works

Solubilities of MgO in H₂SO₄ solutions were measured and X‐ray analyses of over 100 neat cement samples were used to construct an isothermal phase diagram for the system MgO‐H₂SO₄‐H₂O at 23°±3°C. The phases MgO, Mg(OH)₂, 3Mg(OH)₂ MgSO₄·8H₂O (3·1·8), MgSO₄·7H₂O, MgSO₄·6H₂O, and MgSO₄·H₂O were stable at 23°C. The phases Mg(OH)₂· MgSO₄·5H₂O (1·1·5) and MgSO₄·4H₂O were observed but are considered to be metastable, resulting …

Interframe Television Coding Using Gain And Displacement Compensation, J. A. Stuller, A. N. Netravali, J. D. Robbins

Electrical and Computer Engineering Faculty Research & Creative Works

This Paper Presents Algorithms for Predicting Luminance Changes in Successive Television Frames. the Changes Can Result When Objects in a TV Scene Move or When Illumination Varies. by a Gradient Search Technique, Which Seeks to Minimize a Functional of the Interframe Prediction Error, We Estimate Two Parameters Associated with These Luminance Changes—displacement and Gain. using the Estimates of These Parameters, We Also Develop, for Interframe Coding, Adaptive Predictors and a Segmentor to Determine Which Pels Need to Be Transmitted. We Describe Several Coder Variations and Compare Them by Computer Simulations using Three Substantially Different Scene Sequences. for These Sequences, Gain …

A Development Of Regression Models For Predicting Two-Phase Relative Permeability In Consolidated Rock, Mehdi Honarpour

Doctoral Dissertations

"The primary objective of this study was the development of prediction equations for the water-oil imbibition relative permeability and gas-oil drainage relative permeability from experimental data.

Laboratory relative permeability data along with the corresponding rock and fluid properties were collected, and stepwise linear regression analysis was applied. Relative permeability models were developed in terms of rock and fluid properties.

The prediction models were tested against laboratory values and previously published correlations. It was found that the models developed in this study yield results that are generally in better agreement with experimental values than the previously published correlations"--Abstract p. ii

An Alternate High Pressure Injection System For Pressurized-Water Reactors, Gary Edward Mueller

Doctoral Dissertations

"To evaluate the In-Core Injection System (ICIS) performance during a loss-of-coolant accident (LOCA) due to a major rupture in the primary system of a pressurized water reactor (PWR), tests were conducted using the thermal-hydraulic computer code RELAP4/MOD5.

The results for the overall plant system show that the maximum core average fuel cladding temperature reached during an intermediate size cold-leg break in a Combustion Engineering PWR with ICIS is equal to the initial operating temperature of 335°c (636°F). The maximum core average fuel cladding temperature reached during a large size cold-leg break with ICIS is 478°c (893°F). This temperature is approximately …

The Effect Of Availability Improvement Of A Nuclear Power Plant On The Cost Of Generating Electricity, Seyyed Mohammad Reza Nejat

Doctoral Dissertations

"The objective of this investigation is to study the economic benefits in operating a nuclear power plant as a result of improving the availability of the secondary (steam) loop of the plant. A new method has been developed to obtain availability, frequency of failure, probability and frequency of operation, cycle time, and uptime for different capacity states of a parallel-series system having components with failure and repair rates distributed exponentially. The method has been applied to different subsystems, systems, and the secondary loop as a whole. The effect of having spare parts for several components, as measured by savings in …

Phase Equilibria For Iron-Rich Fe-Cu-C Alloys: 1500 To 950°C, Krishna Parameswaran, Kenneth Metz, Arthur E. Morris

Materials Science and Engineering Faculty Research & Creative Works

Isothermal sections for the iron rich corner of the Fe-Cu-C system have been constructed at 1500, 1450, 1200, 1172, 1150, 1000, and 950°C. A ternary invariant point exists at 1172°C where an iron rich liquid, a copper rich liquid, austenite, and graphite coexist. The iron rich liquid contains 3.7 wt pct Cu and 4.0 wt pct C. The austenite contains 7.3 pct Cu and 1.6 pct C. The copper rich liquid contains 2.4 pct Fe, and apparently very little carbon. The diagrams are used to explain the phenomena of "inverse segregation" that occurs during the solidification of iron rich Fe-Cu-C …

An Experimental Study Of The Reactions Of Excited Neon Atoms In Pure Afterglow Plasmas Using Resonance Absorption Spectrometry, R. A. Sierra, J. Beverley Clark, A. J. Cunningham

Materials Science and Engineering Faculty Research & Creative Works

Resonance absorption spectrometry has been applied in a room temperature study of the reactions of excited neon atoms in pure afterglow plasmas. The pressure range 10-500 Torr was investigated. Lorentz broadened linewidths calculated using a simple classical interruption theory allowed fractional absorption signals as large as 98% to be analyzed and absolute excited-state concentrations to be determined. The first absorption studies of the decay of 1P1 excited atoms in neon afterglows are reported. Analysis of the decay profiles of the 3P2, 3P0 and 1P1 excited states allowed quenching rate coefficients for each state to be determined and the role of …

Fire Safe Structural Steel: A Design Guide, Joseph Escalada, Georgi Hall, Brandon Matchen, Hoang Nguyen, Alexander Williams

CCFSS Library (1939 - present)

In 1974, the Constructional Steel Research and Development Organization (CONSTRADO) of England commissioned Ove Amp & Partners to prepare a detailed technical report setting out the most plausible models of flame projection from openings in building facades and the methods of calculating heat transfer from fires to exterior exposed steel columns. The report and an accompanying calculation method were completed in November 1975. In July 1975, the Subcommittee on Fire Teclmology of the Committee on Construction Codes and Standards of American Iron and Steel Institute commissioned a revised major extension of Ove Amp's work, and a two-volume report was completed …

Demonstration Of Low Btu Gasification Using The Grow Facility, V. J. Flanigan, Y. Omurtag

UMR-DNR Conference on Energy

No abstract provided.

Introduction, J. M. Marchello

UMR-DNR Conference on Energy

No abstract provided.

Forward, J. Derald Morgan

UMR-DNR Conference on Energy

No abstract provided.

Ore Microscopic Technique In The Identification And Study Of Uranium Ore Minerals, Richard D. Hagni

UMR-DNR Conference on Energy

No abstract provided.

Energy Analysis Of An Existing Solar Assisted Heat Pump Installed In A Mid-Missouri Residence, Dennis W. Schulte, Albert Chaarles, Ronald H. Howell

UMR-DNR Conference on Energy

No abstract provided.

Annual Heating And Cooling Requirements For Missouri Homes And Effectiveness Of Energy Conservation Techniques, Michael Boles, Michael Bell, Ronald H. Howell

UMR-DNR Conference on Energy

No abstract provided.

The Electrical And Optical Characterization Of Semiconducting Materials For Photovoltaic Utilization, Jack L. Boone, Thomas Van Doren, Patrick L. Cole, Robert D. Engelken, Gary J. Seiter

UMR-DNR Conference on Energy

No abstract provided.

Economics Of Ethanol Production From Agricultural Residues, Oliver C. Sitton, G. L. Foutch, Neil L. Book, J. L. Gaddy

UMR-DNR Conference on Energy

No abstract provided.

Energy Conservation Alternatives For Residential Buildings, Farhat Lahkavani, Harry J, Sauer Jr., Ronald H. Howell

UMR-DNR Conference on Energy

No abstract provided.

Ethylene Process Optimization. Constraint Relaxation And Bounds Adjustment, Kenneth R. Jinkerson, James L. Gaddy

Chemical and Biochemical Engineering Faculty Research & Creative Works

Heavily constrained, mixed integer optimization problems present a difficult test for optimization algorithms. This paper examines optimization of the ethylene process (from ethane) using a flowsheet simulation model and the adaptive random search. Optimization resulted in an improvement in annual earnings of $1.15 MM over the usual ethylene process design. This process has both continuous and discrete variables and has sensitive implicit constraints in the pyrolysis furnace. The search efficiency was found to be improved by relaxing these constraints early in the search and then restoring the constraints as the optimum is approached. The search efficiency was also improved by …

Block Floating Point Fft Statistical Noise Analysis Programs, Thomas Joseph Kolze

Electrical and Computer Engineering Technical Reports

The subroutines and programs used to perform a statistical noise analysis of the Block Floating Point FFT (BFPFFT) are briefly outlined and their listings are presented. Explanation of the required input parameters and the resulting output should make the program easy to use.

Support routines and techniques, including a useful plot subroutine, are also described.

Plastic Analysis And Tests For Rigid High-Rise Composite Frames, J. Hartley Daniels, Dirk P. Duplessis, Thomas Wenk

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

The Variations Of Charpy V-Notch Impact Test Properties In Steel Plates, Aisi Technical Committee On Plates And Shapes

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

A survey of the variation to be expected in Charpy V-Notch tests obtained from plates was conducted by the Committee on Product Standards at the request of the Committee on General Metallurgy. The results of the survey are presented in this report.

The survey data consisted of longitudinal and transverse impact test values obtained from seven specified locations on plates produced to ASTM A-572 as-rolled, A-516 normalized and A-537 quenched and tempered. Three testing temperatures were used for each grade.

The data were collected from industry production during 1973 and 1974. Sufficient data were received to estimate limits of variation …

Welding Of Sheet Steel, Teoman Peköz, William Mcguire

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Structural Stability Research Council: Proceedings 1979, Structural Stability Research Council

CCFSS Library (1939 - present)

One of the purposes of the Council is to maintain a forum where problems related to the design and behavior of columns and other compression elements in metal structures can be presented for evaluation and discussion. The Annual Technical Session provides an opportunity to carry out this function. The 1979 Annual Technical Session was held on April 24 and 25 at The William Penn Hotel in Pittsburgh, Pennsylvania. Eighty-five persons attended the Session and twenty-seven papers were delivered. A panel discussion on "Stability of Space Frame Structures" was held in the evening of April 24, 1979. The panelists were R. …