Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Missouri University of Science and Technology

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1681 - 1710 of 21777

Full-Text Articles in Engineering

Rejuvenation Effect Of Aged Sbs-Modified Asphalt Utilizing Molecule Analysis, Ke Shi, Feng Ma, Jenny Liu, Zhen Fu, Ruimeng Song, Dongdong Yuan, Chen Li Jun 2023

Rejuvenation Effect Of Aged Sbs-Modified Asphalt Utilizing Molecule Analysis, Ke Shi, Feng Ma, Jenny Liu, Zhen Fu, Ruimeng Song, Dongdong Yuan, Chen Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Performance of Styrene-Butadiene-Styrene Modified Asphalt (SBSMA) is Significantly Impacted by its Aging and Regeneration. in This Research, the Molecular Dynamics Simulation Was Utilized to Investigate the Rejuvenation Effect of Active Reagents on Aged SBS Modified Asphalt through the Following Tasks: 1) Verifying the Accuracy of the Asphalt Model by Density and Solubility Parameters; 2) Assessing the Changes in the Rejuvenated Asphalt Model's Energetic Parameters and Volume Parameters, 3) Studying the Interaction Energy between SBS Molecules and Asphalt Molecule Models, and 4) Evaluating the Relative Concentration, Interfacial Interaction Energy, and Diffusion Effect of the Asphalt-Asphalt Models. the Results Indicated that …

Go to article

Hydrogen Gas Sensor Based On Seven-Core Fiber Interference And Pt-Wo3 Film, You Wang, Farhan Mumtaz, Yutang Dai Jun 2023

Hydrogen Gas Sensor Based On Seven-Core Fiber Interference And Pt-Wo3 Film, You Wang, Farhan Mumtaz, Yutang Dai

Electrical and Computer Engineering Faculty Research & Creative Works

Tungsten oxide (WO3) typically owns the characteristics of electrochemical, photo-chromic, and gas-chromic. The seven-core fiber (SCF) generates a strong interference signal that comprises super-modes. The thermo-optic and thermo-expansion characteristics of SCF were utilized with an aid of Pt-WO3 film that makes the sensor highly sensitive to the H2 gas environment. The sensor with spiral micro grooves by femtosecond-laser ablation considerably enhanced the H2 sensitivity from 3.28 nm% to 4.0 nm%, and obtained a response and recovery time < 90 s.

Go to article

Magnetic-Induced Swing Adsorption Over Iron Oxide/13x: Effects Of Particle Size And Oxide Phase On Sorbent Regeneration In Ethylene/Ethane Separation, Khaled Baamran, Ali A. Rownaghi, Fateme Rezaei Jun 2023

Magnetic-Induced Swing Adsorption Over Iron Oxide/13x: Effects Of Particle Size And Oxide Phase On Sorbent Regeneration In Ethylene/Ethane Separation, Khaled Baamran, Ali A. Rownaghi, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

Magnetic induction has emerged as a viable method for regeneration of sorbents during separation processes. In this work, we investigated the efficacy of magnetic sorbents comprising iron oxide and zeolite 13X in ethylene/ethane separation via a magnetic induction process. The electromagnetic properties of the sorbents were tuned by varying the iron oxide (Fe2O3) particle size (30 nm, 100 nm, 5 μm) and iron oxide phase structure (FeO, Fe2O3, Fe3O4) at 20 wt % loading. The effects of these parameters on adsorption capacity, selectivity, and desorption rates were systematically …

Go to article

In Situ Formation Of Silica Nanoparticles Decorated With Well-Defined Homopolymers And Block Copolymers, Fatimah Aldakheel, Konstantinos Ntetsikas, Arief Yudhanto, Gilles Lubineau, Nikos Hadjichristidis Jun 2023

In Situ Formation Of Silica Nanoparticles Decorated With Well-Defined Homopolymers And Block Copolymers, Fatimah Aldakheel, Konstantinos Ntetsikas, Arief Yudhanto, Gilles Lubineau, Nikos Hadjichristidis

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Grafting non-polar polymer chains on the surface of polar nanoparticles (e.g., silica) is an effective way to enhance particle/matrix interactions and thus promote their homogeneous dispersion within a non-polar matrix, which leads to improved mechanical properties. Current grafting methods have not yet produced nanoparticles with well-defined polymers on the surface and high grafting density. Here, we employed anionic polymerization high vacuum techniques to synthesize ω-triethoxysilyl polystyrene (PS-TEOS) and PS-b-PI macromonomers followed by hydrolysis/condensation of macromonomers, leading to the in-situ formation of grafted (grafting through) silica nanoparticles with either PS or polystyrene-b-polyisoprene (PS-b-PI) chains. The molecular characteristics of the precursors PS-TEOS …

Go to article

Ultra-Thin Zro2 Overcoating On Cuo-Zno-Al2o3 Catalyst By Atomic Layer Deposition For Improved Catalytic Performance Of Co2 Hydrogenation To Dimethyl Ether, Xiao Fan, Baitang Jin, Xiaoqing He, Shiguang Li, Xinhua Liang Jun 2023

Ultra-Thin Zro2 Overcoating On Cuo-Zno-Al2o3 Catalyst By Atomic Layer Deposition For Improved Catalytic Performance Of Co2 Hydrogenation To Dimethyl Ether, Xiao Fan, Baitang Jin, Xiaoqing He, Shiguang Li, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

An Ultra-Thin overcoating of Zirconium Oxide (ZrO2) Film on CuO-ZnO-Al2O3 (CZA) Catalysts by Atomic Layer Deposition (ALD) Was Proved to Enhance the Catalytic Performance of CZA/HZSM-5 (H Form of Zeolite Socony Mobil-5) Bifunctional Catalysts for Hydrogenation of CO2 to Dimethyl Ether (DME). under Optimal Reaction Conditions (I.e. 240 °C and 2.8 MPa), the Yield of Product DME Increased from 17.22% for the Bare CZA/HZSM-5 Catalysts, to 18.40% for the CZA Catalyst after 5 Cycles of ZrO2 ALD with HZSM-5 Catalyst. All the Catalysts Modified by ZrO2 ALD Displayed Significantly Improved Catalytic Stability …

Go to article

Influence Of Support Attachment Pattern On The Out-Of-Plane Buckling Capacity Of Steel Deck, Divyansh R. Kapoor, Brian Bogh, Kara D. Peterman Jun 2023

Influence Of Support Attachment Pattern On The Out-Of-Plane Buckling Capacity Of Steel Deck, Divyansh R. Kapoor, Brian Bogh, Kara D. Peterman

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

Diaphragms (Figure 1) serve as a critical component of a building's lateral force resisting system (LFRS), transferring lateral loads from the façade of the structure to the designated vertical lateral force resisting system. Design guidance for profiled steel diaphragm panels can be found in AISI S310 - 20 (AISI 2020) and SDI DDM04 (Luttrell 2015) and are controlled by connection limit states or buckling limit states. Deck connectivity with the underlying frame can either be fully attached (For example 36/7), i.e. connected through the bottom of each flute, or partially attached (for example 36/5 or 36/4) where not all the …

Go to article

Automated Detection And Characterization Of Cracks On Concrete Using Laser Scanning, Yunfeng Ge, Jenny Liu, Xiong Zhang, Huiming Tang, Xiaolong Xia Jun 2023

Automated Detection And Characterization Of Cracks On Concrete Using Laser Scanning, Yunfeng Ge, Jenny Liu, Xiong Zhang, Huiming Tang, Xiaolong Xia

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Accurate crack detection and characterization on concrete are essential for the maintenance, safety, and serviceability of various infrastructures. In this paper, an innovative approach was developed to automatically measure the cracks from 3D point clouds collected by a phase-shift terrestrial laser scanner (TLS) (FARO Focus3D S120). The approach integrates several techniques to characterize the cracks, which include the deviation on point normal determined using k-nearest neighbor (kNN) and principal components analysis (PCA) algorithms to identify the cracks, and principal axes and curve skeletons of cracks to determine the projected and real dimensions of cracks, respectively. The coordinate transformation was then …

Go to article

Field Implementation And Performance Of Fiber-Reinforced Low-Shrinkage Concrete For Bridge Deck Construction, Ahmed Abdelrazik, Kamal Khayat Jun 2023

Field Implementation And Performance Of Fiber-Reinforced Low-Shrinkage Concrete For Bridge Deck Construction, Ahmed Abdelrazik, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Paper Reports on the Field Implementation of Fiber-Reinforced Concrete (FRC) Used for Redecking the Two-Span overpass Bridge in Missouri. the Spans Measured 38.4 and 35.05 M in Length. Modeling of the Structural Behavior of the Bridge Replacement Deck Indicated Significantly High Tensile Stresses at Midspan (Up to 45 MPa) Due to the Continuity of the Deck over the Four Precast Main Girders. Redecking of the Bridge and Casting of the Central Diaphragm Were Carried Out Continuously and Necessitated 40 Concrete Truck Deliveries of 252 M3 of FRC. Six Sensor Towers Were Installed in the Bridge Deck to Monitor Variations …

Go to article

Experimental And Machine Learning Studies On Chitosan-Polyacrylamide Copolymers For Selective Separation Of Metal Sulfides In The Froth Flotation Process, Keitumetse Monyake, Taihao Han, Danish Ali, Lana Z. Alagha, Aditya Kumar Jun 2023

Experimental And Machine Learning Studies On Chitosan-Polyacrylamide Copolymers For Selective Separation Of Metal Sulfides In The Froth Flotation Process, Keitumetse Monyake, Taihao Han, Danish Ali, Lana Z. Alagha, Aditya Kumar

Mining Engineering Faculty Research & Creative Works

The froth flotation process is extensively used for the selective separation of valuable base metal sulfides from uneconomic associated minerals. However, in this complex multiphase process, various parameters need to be optimized to ensure separation selectivity and peak performance. In this study, two machine learning (ML) models, artificial neural network (ANN) and random forests (RF), were used to predict the efficiency of in-house synthesized chitosan-polyacrylamide copolymers (C-PAMs) in the depression of iron sulfide minerals (i.e., pyrite) while valuable base metal sulfides (i.e., galena and chalcopyrite) were floated using nine flotation variables as inputs to the models. The prediction performance of …

Go to article

Rilem Tc 266-Mrp: Round-Robin Rheological Tests On High Performance Mortar And Concrete With Adapted Rheology—A Comprehensive Flow Curve Analysis, Dimitri Feys, Helena Keller, Khadija El Cheikh, Egor Secrieru, Yannick Vanhove Jun 2023

Rilem Tc 266-Mrp: Round-Robin Rheological Tests On High Performance Mortar And Concrete With Adapted Rheology—A Comprehensive Flow Curve Analysis, Dimitri Feys, Helena Keller, Khadija El Cheikh, Egor Secrieru, Yannick Vanhove

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A comprehensive testing program was carried out to compare the rheological properties of flowable concrete that can be obtained from different rheometers. The results obtained from seven rheometers using vane or similar geometries are discussed. A comprehensive flow curve analysis is undertaken for further comparison of the various rheometers. Partially, large differences could be observed between the results obtained from the different rheometers. However, the device-specific trendlines are shown to have significant correlations with the overall baseline. Two potential causes of differences between results are highlighted: imposition/registration of torque/rotational velocity and discrepancies between the measured material flow behavior in the …

Go to article

Time-Domain Shielding Effectiveness Analysis Based On Dgtd Method Accelerated By Local Time-Stepping And Parallel Techniques, Zheng Lang Jia, Huan Huan Zhang, Da Zhi Ding, Lei Zhao, Qiang Ren, Li (Lijun) Jun Jiang Jun 2023

Time-Domain Shielding Effectiveness Analysis Based On Dgtd Method Accelerated By Local Time-Stepping And Parallel Techniques, Zheng Lang Jia, Huan Huan Zhang, Da Zhi Ding, Lei Zhao, Qiang Ren, Li (Lijun) Jun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

The discontinuous Galerkin time-domain (DGTD) method accelerated by local time-stepping (LTS) and parallel techniques is employed to analyze the time-domain shielding effectiveness (TDSE) of metallic enclosures. The detailed formulations and implementation procedures of the DGTD method and LTS and parallel techniques are introduced. Numerical results validate the correctness of the proposed method. Moreover, the influence of various design parameters of the metallic enclosure, including aperture dimensions, wall thickness, spacing of aperture arrays, etc., on the TDSE are analyzed by the proposed method. Some rules are given for the design of the enclosure with rectangular apertures from the perspective of TDSE. …

Go to article

Identifying Adhesion Characteristics Of Metal-Polymer Interfaces: Recent Advances In The Case Of Electroplated Acrylonitrile Butadiene Styrene, Arief Yudhanto, Xiaole Li, Ran Tao, Ruslan Melentiev, Gilles Lubineau Jun 2023

Identifying Adhesion Characteristics Of Metal-Polymer Interfaces: Recent Advances In The Case Of Electroplated Acrylonitrile Butadiene Styrene, Arief Yudhanto, Xiaole Li, Ran Tao, Ruslan Melentiev, Gilles Lubineau

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Applying thin metallic coating layers on the surface of polymeric parts or structures (metallization) that is generally performed via electroplating process aims to improve both mechanical integrity and design aesthetics. The mechanical integrity of the electroplated polymeric parts, which is greatly controlled by the strong interfacial adhesion between metal and polymer, can be measured using standardized tests, such as tape test and peel test, among others. However, various factors pertaining to the electroplating and the nature of these standardized tests affect our interpretation on the identified metal–polymer adhesion. In this paper, we reviewed the recent advances in the effective electroplating …

Go to article

Preliminary Bond Capacity Exploration Between Monolayer Graphene And Cementitious Composites, Yanping Zhu, Chuanrui Guo, Genda Chen Jun 2023

Preliminary Bond Capacity Exploration Between Monolayer Graphene And Cementitious Composites, Yanping Zhu, Chuanrui Guo, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Aims to Explore Bond Capacity between Monolayer Graphene and Cementitious Composites for the First Time through a Pullout Test. the Low-Pressure Chemical Vapor Deposition Method Was Used to Synthesize Monolayer Graphene on the Copper Substrate to Be Embedded in the Mortar Made by the Briquette Mold. the Bond Capacity between Them Was Higher Than the Tensile Strength of the Copper Sheet with As-Grown Monolayer Graphene on the Surface Since All Specimens Failed in Fracture with Embedment Length of More Than 30 Mm. the Monolayer Graphene Enhanced the Copper Tensile Fracture Stress and Normalized Energy during the Test as …

Go to article

Coating Condition Detection And Assessment On The Steel Girder Of A Bridge Through Hyperspectral Imaging, Pengfei Ma, Jiaoli Li, Ying Zhuo, Pu Jiao, Genda Chen Jun 2023

Coating Condition Detection And Assessment On The Steel Girder Of A Bridge Through Hyperspectral Imaging, Pengfei Ma, Jiaoli Li, Ying Zhuo, Pu Jiao, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The organic coating of bridge steel girders is subjected to physical scratches, corrosion, and aging in natural weathering. The breakdown of the coating may cause serviceability and safety problems if left unnoticed. Conventional coating inspection is time-consuming and lacks information about the coating's chemical integrity. A hyperspectral imaging method is proposed to detect the condition of steel coatings based on coating-responsive features in reflectance spectra. A field test was conducted on the real-world bridge, which shows obvious signs of degradation. The hyperspectral signature enables an assessment of the coating's health and defect severity. The results indicated that the coating scratch …

Go to article

Fate And Distribution Of Orally-Ingested Ceo2-Nanoparticles Based On A Mouse Model: Implication For Human Health, Xingmao Ma, Xiaoxuan Wang, Lei Xu, Honglan Shi, Hu Yang, Kerstin K. Landrock, Virender K. Sharma, Robert S. Chapkin Jun 2023

Fate And Distribution Of Orally-Ingested Ceo2-Nanoparticles Based On A Mouse Model: Implication For Human Health, Xingmao Ma, Xiaoxuan Wang, Lei Xu, Honglan Shi, Hu Yang, Kerstin K. Landrock, Virender K. Sharma, Robert S. Chapkin

Chemistry Faculty Research & Creative Works

The use of nanoparticles in agrichemical formula and food products as additives has increased their chances of accumulation in humans via oral intake. Due to their potential toxicity, it is critical to understand their fate and distribution following oral intake. Cerium oxide nanoparticle (CeO2NP) is commonly used in agriculture and is highly stable in the environment. as such, it has been used as a model chemical to investigate nanoparticle's distribution and clearance. based on their estimated human exposure levels, 0.15–0.75 mg/kg body weight/day of CeO2NPs with different sizes and surface charges (30–50 nm with negative charge and <25 >nm with positive …

Go to article

Decomposition Of The Wall-Heat Flux Of Compressible Boundary Layers, Dongdong Xu, Pierre Ricco, Lian Duan Jun 2023

Decomposition Of The Wall-Heat Flux Of Compressible Boundary Layers, Dongdong Xu, Pierre Ricco, Lian Duan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We use the method developed by Elnahhas and Johnson ["On the enhancement of boundary layer skin friction by turbulence: An angular momentum approach," J. Fluid Mech. 940, A36 (2022)] and Xu et al. ["Decomposition of the skin-friction coefficient of compressible boundary layers," Phys. Fluids 35, 035107 (2023)] for the decomposition of the skin-friction coefficient to integrate the mean temperature equation for high-Reynolds-number compressible boundary layers and arrive at an identity for the decomposition of the wall-heat flux. The physical interpretation of the identity and the limitations of this approach are discussed. We perform an integration on the mean temperature equation …

Go to article

A Hybrid Admm For Six-Degree-Of-Freedom Entry Trajectory Optimization Based On Dual Quaternions, Chaoying Pei, Changhuang Wan, Ran Dai, Jeremy R. Rea Jun 2023

A Hybrid Admm For Six-Degree-Of-Freedom Entry Trajectory Optimization Based On Dual Quaternions, Chaoying Pei, Changhuang Wan, Ran Dai, Jeremy R. Rea

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This article investigates the six-degree-of-freedom (6-DoF) entry trajectory optimization problem in a Human-Mars entry, powered descent, and landing mission. During the entry phase, aerodynamic forces are employed to decelerate the vehicle. Instead of being treated as a point mass, both translational and rotational motions of the entry vehicle are considered. Specifically, the 6-DoF rigid body motion of the entry vehicle is modeled using the unit dual quaternion representations to avoid highly nonlinear terms in the flight dynamics expression originally based on the flight-path coordinates. Then, the entry trajectory optimization problem is to minimize the terminal speed subject to dynamical, operational, …

Go to article

Erratum To “Structure Of Tin Phosphate Glasses By Neutron And X-Ray Diffraction” [Journal Of Non Crystalline Solids:X 2c (2019) 100017] (Journal Of Non-Crystalline Solids: X (2019) 2, (S2590159119300305), (10.1016/J.Nocx.2019.100017)), U. Hoppe, Richard K. Brow, A. C. Hannon, M. V. Zimmermann Jun 2023

Erratum To “Structure Of Tin Phosphate Glasses By Neutron And X-Ray Diffraction” [Journal Of Non Crystalline Solids:X 2c (2019) 100017] (Journal Of Non-Crystalline Solids: X (2019) 2, (S2590159119300305), (10.1016/J.Nocx.2019.100017)), U. Hoppe, Richard K. Brow, A. C. Hannon, M. V. Zimmermann

Materials Science and Engineering Faculty Research & Creative Works

The publisher regrets the following conflict of interest text was not published. • All the authors listed in this article have made Substantial contributions to the conception or design of the work; or the acquisition, analysis, or interpretation of data for the work; AND drafting the work or revising it critically for important intellectual content; AND Final approval of the version to be published. • I also undertake that the article represents valid work. Neither this article nor any part of it has been copied or plagiarized from other works. • That the article has not been published so far …

Go to article

Dissolution Rates Of Borophosphate Glasses In Deionized Water And In Simulated Body Fluid, Parker T. Freudenberger, Rebekah L. Blatt, Richard K. Brow Jun 2023

Dissolution Rates Of Borophosphate Glasses In Deionized Water And In Simulated Body Fluid, Parker T. Freudenberger, Rebekah L. Blatt, Richard K. Brow

Materials Science and Engineering Faculty Research & Creative Works

Particles of Borophosphate Glasses with the Nominal Molar Compositions 16Na2O-(24-Y)CaO-YSrO-XB2O3-(60-X)P2O5 (Mol%), Where 0 ≤ X ≤ 60 and Y = 0, 12, and 24, Were Reacted in Deionized Water and in Simulated Body Fluid (SBF) at 37 °C. for the Dissolution Experiments in Water, the PH of the Solution at the Conclusion of the Experiments Increased Systematically, from 2.1 to 9.5, for Y = 0 Glasses When 'x' Increased from 0 to 60. the Reaction Rates over the First 8–24 H of Dissolution in Both SBF and Deionized Water Followed Linear …

Go to article

Hybrid Model To Evaluate The Frequency-Dependent Leakage Inductance Of Partially-Filled Transformers, Angshuman Sharma, Jonathan W. Kimball Jun 2023

Hybrid Model To Evaluate The Frequency-Dependent Leakage Inductance Of Partially-Filled Transformers, Angshuman Sharma, Jonathan W. Kimball

Electrical and Computer Engineering Faculty Research & Creative Works

The leakage inductance of a transformer designed for a power electronic converter can drop significantly as the switching frequency is increased due to skin and proximity effects. Although the magnetic image method-Based double-2-D model can predict the low-frequency leakage inductance of a partially filled transformer with sufficient accuracy, it is inherently a frequency-independent model. While Dowell's 1-D model uses frequency-dependent relations to account for both skin and proximity effects, its accuracy is severely affected by the assumed winding geometry. in this paper, a semi-analytical hybrid model is proposed that uses superposition to combine a modified Dowell's model with the double-2-D …

Go to article

Effect Of Cr And Ni Concentrations On Resilience Of Cast Nb-Alloyed Heat Resistant Austenitic Steels At Extreme High Temperatures, Simon N. Lekakh, Mario F. Buchely, Mei Li, Larry Godlewski May 2023

Effect Of Cr And Ni Concentrations On Resilience Of Cast Nb-Alloyed Heat Resistant Austenitic Steels At Extreme High Temperatures, Simon N. Lekakh, Mario F. Buchely, Mei Li, Larry Godlewski

Materials Science and Engineering Faculty Research & Creative Works

Austenitic Cr–Ni Alloyed Heat Resistant Steels with Nb Additions Are Used for Intensively Thermo-Mechanically Loaded Cast Components Working in Extreme High Temperature Oxidizing Environment. their Performance during Static Oxidation and Transient Thermo-Mechanical Loading Was Investigated to Recommend an Optimal Cost-Effective Cr/Ni Composition of Nb-Alloyed Austenitic Class Steels. the Static Oxidation and Transient Thermo-Mechanical Behavior of Three Austenitic Steels with Different Cr/Ni Alloying Levels Were Investigated and Compared for Variety of Working Conditions. Static Oxidation Was Performed between 900 °C and 1000 °C in Air for 400 H. the Critical Temperature Which Increases Spallation during Static Oxidation Was Determined for Each …

Go to article

A Prediction Of Young's Modulus For Tin Containing Phosphate Glasses Using Quantitative Structural Information, Tatsuki Shimizu, Akira Saitoh, Uwe Hoppe, Grégory Tricot, Richard K. Brow May 2023

A Prediction Of Young's Modulus For Tin Containing Phosphate Glasses Using Quantitative Structural Information, Tatsuki Shimizu, Akira Saitoh, Uwe Hoppe, Grégory Tricot, Richard K. Brow

Materials Science and Engineering Faculty Research & Creative Works

A Rigid Unit Packing Fraction (RUPF) Model Was Used to Better Understand the Influence of Local Structural Units on the Young's Elastic Modulus (E) of Binary and Ternary Tin Phosphate Glasses. Quantitative Analyses of the Units that Constitute the Glass Structure, Obtained from X-Ray/neutron Diffraction and 31P MAS-NMR Spectroscopy, Were Used to Calculate Polyhedral Packing Fractions that, with Tabulated Bond Dissociation Energies, Were Used to Predict E based on a Modification of the Makashima-Mackenzie Relationship, Which Uses Ion Sizes to Calculate Packing Fractions. Predictions based on the RUPF Model Are Better Than Those based on Ion Sizes, and Extending the …

Go to article

Predicting The Friction Coefficient Of High-Friction Surface Treatment Application Aggregates Using The Aggregates' Characteristics, Ahmed S. El-Ashwah, Korrenn Broaddus, Magdy Abdelrahman May 2023

Predicting The Friction Coefficient Of High-Friction Surface Treatment Application Aggregates Using The Aggregates' Characteristics, Ahmed S. El-Ashwah, Korrenn Broaddus, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Providing Sufficient Pavement Surface Friction (I.e., Skid Resistance) between Vehicle Tires and Pavement Surface throughout the Pavement Service Life is Considered to Be One of the Main Objectives of Highway Design. Moreover, Vehicle Safety, the Amount of Consumed Fuel, and the Wearing Rate of Vehicle Tires Generally Are Influenced by Pavement Surface Friction. in This Study, a Comprehensive Experimental Testing Program Was Conducted on Different Aggregate Sources, Including Calcined Bauxite and Five Alternative Local Sources, to Assess their Friction Characteristics. the Testing Program Included a British Pendulum Tester (BPT) and a Dynamic Friction Tester (DFT), Which Were Used to Evaluate …

Go to article

Reducing The Vulnerability Of Electric Power Infrastructure Against Natural Disasters By Promoting Distributed Generation, Gasser G. Ali, Islam H. El-Adaway, Charles Sims, J. Scott Holladay, Chien Fei Chen May 2023

Reducing The Vulnerability Of Electric Power Infrastructure Against Natural Disasters By Promoting Distributed Generation, Gasser G. Ali, Islam H. El-Adaway, Charles Sims, J. Scott Holladay, Chien Fei Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Natural disasters cause significant damage to the electrical power infrastructure every year. Therefore, there is a crucial need to reduce the vulnerability of the electric power grid against natural disasters. Distributed generation (DG) represents small-scale decentralized power generation that can help reduce the vulnerability of the grid, among many other benefits. Examples of DG include small-scale photo-voltaic (PV) systems. Accordingly, the goal of this paper is to investigate the benefits of DG in reducing the vulnerability of the electric power infrastructure by mitigating against the impact of natural disasters on transmission lines. This was achieved by developing a complex system-of-systems …

Go to article

Evaluating The Impact Of Broadband Access And Internet Use In A Small Underserved Rural Community, Javier Valentín-Sívico, Casey I. Canfield, Sarah A. Low, Christel Gollnick May 2023

Evaluating The Impact Of Broadband Access And Internet Use In A Small Underserved Rural Community, Javier Valentín-Sívico, Casey I. Canfield, Sarah A. Low, Christel Gollnick

Engineering Management and Systems Engineering Faculty Research & Creative Works

Having adequate access to the internet at home enhances quality-of-life for households and facilitates economic and social opportunities. Despite increased investment in response to the COVID-19 pandemic, millions of households in the rural United States still lack adequate access to high-speed internet. In this study, we evaluate a wireless broadband network deployed in Turney, a small, underserved rural community in northwest Missouri. In addition to collecting survey data before and after this internet intervention, we collected pre-treatment and post-treatment survey data from comparison communities to serve as a control group. Due to technical constraints, some of Turney's interested participants could …

Go to article

Optimal Offering Strategy Of Genco With Joint Participation In Ftr Auction And Day-Ahead Market Considering Virtual Bidding, Hossein Mehdipourpicha, Rui Bo, Siyuan Wang May 2023

Optimal Offering Strategy Of Genco With Joint Participation In Ftr Auction And Day-Ahead Market Considering Virtual Bidding, Hossein Mehdipourpicha, Rui Bo, Siyuan Wang

Electrical and Computer Engineering Faculty Research & Creative Works

Nodal price separations in Day-Ahead (DA) market caused by transmission congestion create congestion charges/surplus that are reallocated to the market participants through the financial transmission right (FTR) auction. From a market participant's viewpoint, these two markets are interrelated because the revenue of market participant in FTR auction is determined based on the day-ahead locational marginal prices. Furthermore, virtual transactions which are designed to improve price convergence between the day-ahead and real-time markets can directly impact day-ahead prices. This impact through virtual transactions may be utilized by a market participant to increase its FTR value and improve its overall strategy in …

Go to article

Tensile Behavior Of Layered Rock Disks Under Diametral Loading: Experimental And Numerical Investigations, Mostafa Asadizadeh, Saeed Khosravi, Soheil Abharian, Mehrdad Imani, Jamshid Shakeri, Ahmadreza Hedayat, Nima Babanouri, Taghi Sherizadeh May 2023

Tensile Behavior Of Layered Rock Disks Under Diametral Loading: Experimental And Numerical Investigations, Mostafa Asadizadeh, Saeed Khosravi, Soheil Abharian, Mehrdad Imani, Jamshid Shakeri, Ahmadreza Hedayat, Nima Babanouri, Taghi Sherizadeh

Mining Engineering Faculty Research & Creative Works

The Tensile Strength and Cracking Behavior of Layered Rocks in a Tensile Stress Field Are One of the Most Significant Characteristics of Rock Masses, Which May Strongly Affect the Stability of Rock Structures. the Study Presented Here Investigated the Effect of Layer Spacing and Inclination Angle on the Indirect Tensile Strength, Crack Development, Failure Pattern, and Contact Force Chain of Layered Disks under Diametral Loading using Experimental and Numerical Investigations. Numerous Experimental Models Made from Plaster Were Examined under Diametral Loading, and a Two-Dimensional Particle Flow Code (PFC2D) Was Adopted for in Depth Simulation of the Failure Process. Both Numerical …

Go to article

Transport Phenomena With Reactions In Drug Delivery: Towards A Quantitative Description, Xianjie Qiu, Parthasakha Neogi May 2023

Transport Phenomena With Reactions In Drug Delivery: Towards A Quantitative Description, Xianjie Qiu, Parthasakha Neogi

Chemical and Biochemical Engineering Faculty Research & Creative Works

A Distributed System Called a Krogh Cylinder is Used Here to Quantify the Transport of a Solute from the Capillary into the Extravascular Tissue. the Capillary Network is Broken Down into Cylindrical Cells, Each Containing a Capillary and an Appropriate Amount of Extravascular Tissue. the Flow in the Cylinder Model Has Two-Dimensional Velocities, Which Are in the Axial and Radial Directions. All Parameters of the System, together with the Geometric Ones, Have Been Included in the Model. for a Given Bioavailability, the Uptakes of Reactive and Nonreactive Solutes Have Been Obtained. Very Large or Massive Molecules Have Been Considered. the …

Go to article

Dual Crosslinked Poly(Acrylamide-Co-N-Vinylpyrrolidone) Microspheres With Re-Crosslinking Ability For Fossil Energy Recovery, Jingyang Pu, Baojun Bai, Jiaming Geng, Na Zhang, Thomas Schuman May 2023

Dual Crosslinked Poly(Acrylamide-Co-N-Vinylpyrrolidone) Microspheres With Re-Crosslinking Ability For Fossil Energy Recovery, Jingyang Pu, Baojun Bai, Jiaming Geng, Na Zhang, Thomas Schuman

Chemical and Biochemical Engineering Faculty Research & Creative Works

Microspheres have been proposed to be applied in controlling wastewater production for mature oilfields and migrating leakage for gas and nuclear waste storage. However, it remains challenging for stacked microspheres to maintain strong blocking ability in micron-sized small pores or fractures. in this study, a novel microsphere was developed with comprehensive properties including high deformability and long re-crosslinking time upon tunable swelling ratio for the applications. a dual covalent and physical crosslinking strategy was used to develop novel microspheres reinforced by a hydrogen bond (H-bond, between pyrrole ring and amide group) and coordination bond (between chromium acetate (CrAc) and carboxyl …

Go to article

Rilem Tc 266-Mrp: Round-Robin Rheological Tests On High Performance Mortar And Concrete With Adapted Rheology—Rheometers, Mixtures And Procedures, Dimitri Feys, Mohammed Sonebi, Sofiane Amziane, Chafika Djelal, Khadija El-Cheikh, Shirin Fataei, Markus Greim, Irina Ivanova, Helena Keller, Kamal Khayat, Laurent Libessart, Viktor Mechtcherine, Ivan Navarrete, Arnaud Perrot May 2023

Rilem Tc 266-Mrp: Round-Robin Rheological Tests On High Performance Mortar And Concrete With Adapted Rheology—Rheometers, Mixtures And Procedures, Dimitri Feys, Mohammed Sonebi, Sofiane Amziane, Chafika Djelal, Khadija El-Cheikh, Shirin Fataei, Markus Greim, Irina Ivanova, Helena Keller, Kamal Khayat, Laurent Libessart, Viktor Mechtcherine, Ivan Navarrete, Arnaud Perrot

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Recent developments in understanding the rheology of mortar and concrete as well as applying this understanding in the practice of construction necessitate an accurate assessment of materials' rheological properties. It is well known that different rheometers for mortar and concrete deliver different results, as this was shown over 15 years ago in two measuring campaigns comparing concrete rheometers. Considering newly developed rheometers, including those to evaluate interface rheology and structural build-up at rest, as well as additional measurement procedures and data interpretation techniques, a new comparison campaign was carried out in 2018 at the Université d'Artois, in Bethune, France. This …

Go to article

First Prev Next Last