Engineering Commons^™

Dual-Polarized Near-Field Microwave Reflectometer For Noninvasive Inspection Of Carbon Fiber Reinforced Polymer-Strengthened Structures, Sergey Kharkovsky, Adam C. Ryley, Vivian Stephen, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

Carbon fiber reinforced polymer (CFRP) composites are increasingly being used to strengthen various components of civil, aerospace, and automotive infrastructures. Subsequent to the application of CFRP, evaluation of the structural integrity of the strengthened members becomes a critical issue. Microwave noninvasive inspection techniques have been successfully used for this purpose. To this end, a novel near-field microwave inspection system that employs a dual-polarized reflectometer for detecting defects, such as disbonds between CFRP laminates and strengthened structures, was developed. It is shown that this system is capable of automatic removal of the influence of undesired standoff distance (or surface roughness) variations. …

Efficient Mrf Approach To Document Image Enhancement, Tayo Obafemi-Ajayi, Gady Agam, Ophir Frieder

Electrical and Computer Engineering Faculty Research & Creative Works

Markov random field (MRF) based approaches have been shown to perform well in a wide range of applications. Due to the iterative nature of the algorithm, the computational cost of such applications is normally high. In the context of document image analysis, where numerous documents have to be processed, this computational cost may become prohibitive. We describe a novel approach to document image enhancement using MRF. We show that by using domain specific knowledge, we are able to substantially improve computational performance by an order of magnitude. Moreover, in contrast to known techniques where patch initialization is arbitrary, in the …

Gaussian Basis Functions For Chemometrics, Tuomas Kärnä, Francesco Corona, Amaury Lendasse

Engineering Management and Systems Engineering Faculty Research & Creative Works

High-Dimensional Data Are Becoming More and More Common, especially in the Field of Chemometrics. Nevertheless, it is Generally Known that Most of the Commonly Used Prediction Models Suffer from Curse of Dimensionality that is the Prediction Performance Degrades as Data Dimension Grows. Therefore, It is Important to Develop Methodology for Reliable Dimensionality Reduction. in This Paper, We Propose a Method that is based on Functional Approximation using Gaussian Basis Functions. the Basis Functions Are Optimized to Accurately Fit the Spectral Data using Nonlinear Gauss-Newton Algorithm. the Fitting Weights Are Then Used as Training Data to Build a Least-Squares Support Vector …

Wavelength Selection Using The Measure Of Topological Relevance On The Self-Organizing Map, Francesco Corona, Satu Pia Reinikainen, Kari Aaljoki, Annikki Perkiö, Elia Liitiäinen, Roberto Baratti, Olli Simula, Amaury Lendasse

Engineering Management and Systems Engineering Faculty Research & Creative Works

In This Work, We Investigated the Possibility to Perform Wavelength Selection by Exploiting the Metric Structure of the Spectrophotoscopic Measurements. the Topologically Preserving Representation of the Data is Performed using the Self-Organizing Map (Som) Where the Inputs' Significance to the Output is Computed with the Measure of Topological Relevance (MTR) on Som. the MTR on Som is a Metric Measuring the Similarity between Local Distance Matrices and We Found that Spectral Inputs with a Topology, Which Is, Close to the Outputs Are Also Associated to the Wavelengths that Chemically Explain the Influence of the Spectra to the Property of Interest. …

Modeling The Fate Of Pharmaceuticals And Personal Care Products In Sewage Treatment Plants, Craig D. Adams

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Chemical fate models can be used to estimate the transformation reactions and the partitioning behavior of pharmaceuticals and personal care products (PPCPs) in sewage treatment plants (STPs). Modeling the fate of PPCPs in a STP requires parameters such as rate constants or partition coefficients that are often unique to a specific STP, and that may exhibit significant temporal variability. Chemical fate models provide both a valuable test of our understanding of the fundamental underlying mechanisms regarding the fate of PPCPs in STPs, as well as a means of providing both qualitative and quantitative estimates for PPCP removal. This paper is …

Kinetics And Reaction Products Of Ozone And Surface-Bound Squalene, J. R. Wells, Glenn Morrison, Beverly K. Coleman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Because of the high occupant density in aircraft, the surface chemistry of ozone and squalene, an important component of skin oil, was evaluated. a reaction probability of 45±14) x 10 -5 was determined for the reaction of squalene (2,6,10,15,19,23-hexamethyl-2,6,10,14,18,22- tetracosahexaene) with ozone (50 parts per billion (ppb)) on a glass plate surface using the Field and Laboratory Emission Cell (FLEC) Automation and Control System (FACS). to more clearly define part of squalene's indoor environment degradation mechanism, gas-phase and surface-bound products of the squalene+O3 reaction were also investigated. Emitted products were captured in solution, derivatized with O-(2,3,4,5,6pentafluorobenzyl) hydroxylamine (PFBHA), and analyzed …

Indication Of Cylinder Pressure Rise Rate By Means Of Vibration And Acoustic Emissions Of An Internal Combustion Engine, Jeffery A. Massey

Masters Theses

"The focus of this study is to investigate the ability of the vibration and acoustic emissions of an internal combustion engine to indicate the cylinder pressure rise rate (PRR). Investigations are conducted on both a small-single cylinder spark-ignition (SI) engine and a larger multi-cylinder compression-ignition (CI) engine. Vibration measurements were made on both engines, however only acoustic measurements were made on the SI engine. Specific vibration and acoustic frequency bands were identified as correlating to energy generated from combustion and energy generated by cylinder cavity resonances"--Abstract, page iii.

Groundwater Circulation Well Operation Using Wind Turbine–Generated Energy, Ron Gallagher, Andrew Curtis Elmore

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

An investigation was conducted regarding the potential economic benefits associated with using a wind turbine to power a groundwater circulation well (GCW) at the former Nebraska Ordnance Plant Superfund site. the first phase of the investigation used a 10-kilowatt-rated grid inter-tie wind turbine to partially offset the purchase of electricity from the utility company. the second phase consisted of the conversion of the grid inter-tie system to an off-grid system that stored energy using batteries. during the second phase, the GCW system was operated using either wind turbine power or utility power, and the other system components were operated using …

Integrated Process Planning For A Hybrid Manufacturing System, Lan Ren

Doctoral Dissertations

"A hybrid manufacturing system integrated CNC machining and laser-aided layered deposition and achieves the benefits of both processes. In this dissertation, an integrated process planning framework which aims to automate the hybrid manufacturing process is investigated. Critical components of the process planning, including 3D spatial decomposition of the CAD model, improvement of the toolpath generation pattern, repairing strategies using a hybrid manufacturing system, etc., are discussed"--Abstract, page iv.

System And Ic Level Analysis Of Electrostatic Discharge (Esd) And Electrical Fast Transient (Eft) Immunity And Associated Coupling Mechanisms, Jayong Koo

Doctoral Dissertations

"The exposure of electronic circuits to lightning, electrostatic discharge (ESD), electrical fast transients (EFT) or sine wave signals can reveal RF immunity problems. Typical problems include temporary malfunctions or permanent damage of integrated circuits (ICs). In an effort to reproduce those disturbances, a series of electromagnetic compatibility standards has been developed. However, a complete understanding of the root cause of the immunity problems has yet to be established. This dissertation discusses immunity problems in three papers, starting at the system level, via the coupling path into the IC"--Abstract, page iv.

Stable Pde Solution Methods For Large Multiquadric Shape Parameters, Nicolas Ali Libre, Arezoo Emdadi, Edward J. Kansa, Mohammad Rahimian, Mohammad Shekarchi

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

We present a new method based upon the paper of Volokh and Vilney (2000) that produces highly accurate and stable solutions to very ill-conditioned multiquadric (MQ) radial basis function (RBF) asymmetric collocation methods for partial differential equations (PDEs). We demonstrate that the modified Volokh-Vilney algorithm that we name the improved truncated singular value decomposition (IT-SVD) produces highly accurate and stable numerical solutions for large values of a constant MQ shape parameter, c, that exceeds the critical value of c based upon Gaussian elimination.

Friction Stir Channeling: An Innovative Technique For Heat Exchanger Manufacturing, Nagarajan Balasubramanian

Doctoral Dissertations

"Friction stir processing (FSP) is an emerging processing technique based on the principles of friction stir welding (FSW), which is a relatively new solid-state metal joining process developed by The Welding Institute, UK. Some of the unique features of FSW such as the low amount of heat generated, extensive plastic deformation and controlled flow of material is being exploited to develop new material modification and manufacturing processes. Friction stir channeling (FSC) is one such adaptation of FSP that can produce continuous and stable internal channels for application in heat exchanging equipment. Friction stir channeling produces these channels if the defect …

Addressing Nonlinear Combustion Instabilities In Highly Dilute Spark Ignition Engine Operation, Brian C. Kaul

Doctoral Dissertations

"Dilute operation is a promising approach for increasing spark-ignition engine efficiency, in the form of either lean burn (air dilution) or EGR (inert dilution). High levels of charge dilution, however, lead to cyclic variability that is largely deterministic in nature. The determinism and nonlinear nature of the system indicate that it should be possible to reduce the cycle-to-cycle variations by implementing an electronic controller. Several needs arise when considering the development of such a controller. Three topics of interest are covered herein. First, a method of analysis for nonlinear dynamical systems is applied to engine data in order to estimate …

A Comparison Of Alternating Minimization And Expectation Maximization Algorithms For Single Source Gamma Ray Tomography, R. Varma, S. Bhusarapu, J. A. O'Sullivan, M. (Muthanna) H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Lange and Carson (1984 J. Comput. Assist. Tomogr. 8 306-16) Defined Image Reconstruction for Transmission Tomography as a Maximum Likelihood Estimation Problem and Derived an Expectation Maximization (EM) Algorithm to Obtain the Maximum Likelihood Image Estimate. However, in the Maximization Step or M-Step of the EM Algorithm, an Approximation is Made in the Solution Which Can Affect the Image Quality, particularly in the Case of Domains with High Attenuating Material. O'Sullivan and Benac (2007 IEEE Trans. Med. Imaging 26 283-97) Reformulated the Maximum Likelihood Problem as a Double Minimization of an I-Divergence to Obtain a Family of Image Reconstruction Algorithms, …

Effect Of Hydrodynamic Multiplicity On Trickle Bed Reactor Performance, Werner Van Der Merwe, Willie Nicol, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Multiple Hydrodynamic States in Trickle Bed Reactors Have Been the Subject of Numerous Hydrodynamic Investigations. the Extent of Variation in the Hydrodynamic Parameters (Like Holdup and Pressure Drop) is Large and This Variation Can Be Expected to Have a Significant Impact on the Conversion in a Reaction System. This Study Presents Reaction Data for Α-Methyl Styrene Hydrogenation in a Trickle Bed Reactor over a Range of Conditions that Include Gas and Liquid Limitations. It is Seen that Liquid Flow Rate Variation Induced Hysteresis Has a Large Impact on the Conversion. for Gas-Limited Reactions, the Upper Branch of the Pressure Drop …

Glass Transition Behavior Of Poly(Methyl Acrylate) End-Grafted By Atrp To Amorphous Silica, Manikantan B. Nair, Frank D. Blum

Chemistry Faculty Research & Creative Works

Ultra-thin polymer films attached to solid substrates (supported films) have attracted significant interest in recent years. Supported films are used in the design of advanced materials like photoresists, lubricants and other electronic devices. Glass transition temperatures (Tgs) of supported polymer films have also been of significant interest. The Tg has been shown to depend on the thickness of the polymer film on the surface and the inherent nature of the surface. The effect of end-grafting of a polymer chain to a surface, on the Tg of the polymer has been studied previously.1 Reports on the study of glass transition behaviors …

Polyaniline Nanofiber-Based Gas Sensors, Zhe-Fei Li, Frank D. Blum, Massimo F. Bertino, Chang-Soo Kim

Chemistry Faculty Research & Creative Works

There has been recent interest in conducting polymers that have very promising chemical and electrical applications. Some of these polymers have shown great potential for use in sensors.1 Polyaniline is one particular example of a prospective material. In our laboratory, we have studied the synthesis of polyaniline nanofibers. We have carried out one-pot syntheses to obtain polyaniline nanofibers in aqueous solutions where the polymerization was influenced by γ-radiation2 or UV-radiation.3 This polymer can also be patterned with an appropriate photo mask. In our present report, polyaniline nanofiber thin film sensors have been fabricated in one step by employing UV-irradiation and …

Dynamics Of Adsorbed Pma-D₃ - Effect Of Substrate, Frank D. Blum, Burak Metin, Macduff O. Okuom

Chemistry Faculty Research & Creative Works

In the last few years, our group has focused much of our attention on studying the dynamics of polymers adsorbed at interfaces. Much of our work, to date has been on labeled poly(vinyl acetate)-d3 (PVAc-d3)1 and poly(methyl acrylate)-d3 (PMA-d3)2 on silica. We have been able to probe the effects of adsorbed amount,3 molecular mass,4,5 and the effect of overlayer.6 These studies have provided a view of the adsorbed polymer consistent with a motional gradient in the layer with the more mobile segments being those at the air-polymer interface and the less-mobile segments at the substratepolymer interface. However, we have not …

Dynamics Of Pipa-D₇ On Silica Surface, Piyawan Krisanangkura, Frank D. Blum

Chemistry Faculty Research & Creative Works

Molecular motion of polymer chains is an important determinant in understanding the physical properties of polymeric materials. Glass transition temperature (Tg) is a physical property of polymers, which is of primary interest. The study of the dynamics of polymer segments assists in understanding the dependence of Tg on polymer structure.1 For decades, studies have addressed the molecular motion in various polymers. Some of them have probed the dynamics of polymer backbones.2,3 the properties of a polymer at an interface may change because of the type of polymer, the substrate, or other variables. The side chain of a polymer can also …

A Separation Criterion And Non-Intrusive Thickness Measurement Technique For Shear-Driven Films, Mark A. Friedrich

Masters Theses

"The behavior of a shear-driven thin liquid film at a sharp expanding corner is of interest in many engineering applications. However, details of the interaction between inertial, surface tension, and gravitational forces at the corner that result in partial or complete separation of the film from the surface are not clear. The focus of this study was to develop a criterion to predict the onset of shear-driven film separation from the surface at an expanding corner as well as to develop a film thickness measurement technique that could be used to obtain an average film thickness for input into the …

Business Risk In Early Design: An Approach, Rahul Basavaraj Patil

Masters Theses

"The Business Risk in Early Design (B-RED) method is a tool used to determine the potential risks in business, in the early business development stages. In order to launch a successful business in today's competitive market environment, the business should equip itself to face the risks involved in business. If the potential risks are identified even before the launch of the business, then there is an opportunity to avert risks with little or no impact to the budget and schedule. The B-RED method presented in this thesis helps entrepreneurs and people with little or no experience in business to identify …

Fabrication Of Long-Period Fiber Gratings By Co₂ Laser Irradiation For High Temperature Applications, Tao Wei

Masters Theses

"Long period fiber gratings (LPFG) have unique advantages such as small insertion loss, low retro-reflection, good sensory property and low cost fabrication. LPFGs have found many applications in optical fiber communications as well as in optical fiber sensors. Recently, high-performance LPFGs have been successfully fabricated by CO₂ laser irradiations. The unique thermal stability enables many potential sensing applications in high temperature environments. In this thesis...two chemical sensing applications of LPFG were demonstrated. In the first one, the ambient refractive index sensing ability of bare LPFG was examined. The experimental data showed a good agreement with the simulation results. In the …

Analysis Of Access-To-Space Missions Utilizing On-Board Energy Management And Entropic Analysis, Tyler Winter

Masters Theses

"The overall objective of this study is the thermodynamically consistent quantification of second-law and performance losses for vehicle configurations implemented or suggested for access-to-space missions and the development of the relationships between the mission entropy generation and overall mission performance. The detailed theory which allows thermodynamically rigorous loss accounting (entropy generation and direct relationship to vehicle performance) is developed and discussed for aerospace vehicles. A full vehicle trajectory code utilizing simplified models for multi-stage rockets and air-breathing propulsion systems is developed and validated specifically for use as a testbed for second law-based theory and concepts. Results are shown in which …

Block Level Link Path Design And Multilayer Via Transition Model Assembly Using S-Parameters, Francesco De Paulis

Masters Theses

"In high-speed data communication systems the complexity of link path between transmitters and receivers present a challenge for designers to maintain an acceptable bit error rate. An approach is presented in this thesis to design the link path on a block-by-block basis. The unique advantage of this approach lies on the physics-based model of each block, which then relates performance to geometry and makes design improvement and optimization possible. A tool based on the manipulation of frequency domain data has been designed to help in the design and analysis process of fast communication systems. It accepts as inputs the frequency …

Design For Manufacturing For Friction Stir Welding, Harish Bagaitkar

Masters Theses

"This thesis is divided in two parts. In the first part, technical feasibility of implementing Friction Stir Welding (FSW) for automobile chassis fabrication is discussed using a case study. In the case study, Design for Manufacturing (DFM) principles are applied to manufacture an aluminum automobile chassis. Various DFM issues such as Tool Accessibility Issue, Joint Configuration Issue, and Fixture Support Issue along with relevant guidelines such as component geometry change and component elimination are discussed in the first section. Results show that more than 50% of the chassis joints can be welded using FSW technique. The second part of the …

A Laboratory Study Of Struvite Precipitation For Phosphorus Removal From Concentrated Animal Feeding Operation Wastewater, Sushmita Dhakal

Masters Theses

"Struvite precipitation occurs spontaneously in many wastewater treatment facilities as a nuisance. However, struvite precipitation is now being studied as a method to concurrently treat high phosphorus wastewaters and generate a valuable product. Many factors influence the precipitation of struvite such as component -ion molar ratios, pH, aeration, solubility, solids and mixing energy. In the present work, struvite precipitation in the actual swine wastewater was studied by strategically controlling aeration, pH, and mixing"--Abstract, page iv.

Application Of Product Family Design For Engineered Systems In Changing Market Space, Mohit Goswami

Masters Theses

"The focus of this paper is on the design of an engineered system for a changing market space. Due to the dynamic nature of the customer requirements, the specification of product offerings in a particular market may change. Manufacturers need to strategically design their product portfolio in such a way that their profitability is maximized, while deploying the right number of platforms necessary for deriving product variants. Depending on the system architecture, subsystems can be classified into one of the two types: scalar subsystems and modular subsystems. Each subsystem is defined by various parameters, performance criteria, and physical compatibility constraints. …

Derivation Of New Double-Input Dc-Dc Converters Using The Building Block Methodology, Karteek Gummi

Masters Theses

"In most power electronic systems, the instantaneous input and output power vary by time and are not exactly identical with each other. Hence, providing a good match between them is a complicated task to deal with if not impossible. Furthermore, due to the wide variation range of the processed power, the overall efficiency of the system is not high. The solution is to hybridize the system using an energy storage unit like in hybrid electric vehicles, power factor correction systems, and photovoltaic systems. Multi-input converters play a key role in such hybridized systems, where it is required to have more …

Friction Stir Form Welding Of Aluminum Structures, Kamini Ashokkumar Gupta

Masters Theses

"The objective of this work was to demonstrate the applicability of friction stir welding (FSW) technology in the automotive industry. Increasing fuel prices, stringent safety and emission norms are continuously striving automakers to make lightweight, fuel efficient vehicles. Automotive engineers are researching for alternate materials in order to meet weight savings targets. Use of aluminum in place of steel in a car has been increasing for making lightweight vehicles. Conventional welding and spot welding are used as preferred joining methods by the automotive industry. However, if aluminum is used in place of steel alternate joining methods are to be researched. …

Application Of Multi-Modal Fusion Techniques For Corrosion Detection And Characterization In Aging Aircraft Components, Soumya De

Masters Theses

"The United States Air Force (USAF) recently estimated that corrosion maintenance costs exceed $800M per year. Given this, it is desirable to reduce the amount of "find it-fix it" corrosion maintenance activities. One method is to introduce a damage tolerance approach for corrosion detection. In order for this to become a reality, a comprehensive snapshot of corrosion present must be generated.

This thesis presents a data fusion process to perform uni- and multi-modal nondestructive testing and evaluation of corrosion under paint and in lap joints for volumetric characterization. The process for analyzing a given structure includes: 1) the acquisition of …