Engineering Commons^™

Numerical Modeling Of Geophysical Granular Flows: 2. Computer Simulations Of Plinian Clouds And Pyroclastic Flows And Surges, Sebastien Dartevelle, William I. Rose, John Stix, Karim Kelfoun, James W. Vallance

Department of Geological and Mining Engineering and Sciences Publications

Geophysical granular flows display complex nonlinear, nonuniform, and unsteady rheologies, depending on the volumetric grain concentration within the flow: kinetic, kinetic-collisional, and frictional. To account for the whole spectrum of granular rheologies (and hence concentrations), we have used and further developed for geophysical-atmospheric applications a multiphase computer model initially developed by U.S. Department of Energy laboratories: (Geophysical) Multiphase Flow with Interphase Exchange. As demonstrated in this manuscript, (G)MFIX can successfully simulate a large span of pyroclastic phenomena and related processes: plinian clouds, pyroclastic flows and surges, flow transformations, and depositional processes. Plinian cloud simulations agree well with the classical plume …

Scattering Matrices Of Volcanic Ash Particles Of Mount St. Helens, Redoubt, And Mount Spurr Volcanoes, O. Muñoz, H. Volten, J. W. Hovenier, B. Veihelmann, W. J. Van Der Zande, L. B. F. M. Waters, William I. Rose

Department of Geological and Mining Engineering and Sciences Publications

We present measurements of the whole scattering matrix as a function of the scattering angle at a wavelength of 632.8 nm in the scattering angle range 3°–174° of randomly oriented particles taken from seven samples of volcanic ashes corresponding to four different volcanic eruptions: the 18 May 1980 Mount St. Helens eruption, the 1989–1990 Redoubt eruption, and the 18 August and 17 September 1992 Mount Spurr eruptions. The samples were collected at different distances from the vent. The samples studied contain large mass fractions of fine particles and were chosen to represent ash that could remain in the atmosphere for …

Particles In The Great Pinatubo Volcanic Cloud Of June 1991:The Role Of Ice, Song Guo, William I. Rose, Gregg J. S. Bluth, M. I. Watson

Department of Geological and Mining Engineering and Sciences Publications

Pinatubo's 15 June 1991 eruption was Earth's largest of the last 25 years, and it formed a substantial volcanic cloud. We present results of analysis of satellite-based infrared remote sensing using Advanced Very High Resolution Radiometer (AVHRR) and TIROS Operational Vertical Sounder/High Resolution Infrared Radiation Sounder/2 (TOVS/HIRS/2) sensors, during the first few days of atmospheric residence of the Pinatubo volcanic cloud, as it drifted from the Philippines toward Africa. An SO₂-rich upper (25 km) portion drifted westward slightly faster than an ash-rich lower (22 km) part, though uncertainty exists due to difficulty in precisely locating the ash cloud. …

Re-Evaluation Of So2 Release Of The 15 June 1991 Pinatubo Eruption Using Ultraviolet And Infrared Satellite Sensors, Song Guo, Gregg J. S. Bluth, William I. Rose, M. I. Watson, A. J. Prata

Department of Geological and Mining Engineering and Sciences Publications

In this study, ultraviolet TOMS (Total Ozone Mapping Spectrometer) satellite data for SO₂ are re-evaluated for the first 15 days following the 15 June 1991 Pinatubo eruption to reflect new data retrieval and reduction methods. Infrared satellite SO₂ data from the TOVS/HIRS/2 (TIROS (Television Infrared Observation Satellite) Optical Vertical Sounder/High Resolution Infrared Radiation Sounder/2) sensor, whose data sets have a higher temporal resolution, are also analyzed for the first time for Pinatubo. Extrapolation of SO₂ masses calculated from TOMS and TOVS satellite measurements 19–118 hours after the eruption suggest initial SO₂ releases of 15 ± 3 …

Explosion Dynamics Of Pyroclastic Eruptions At Santiaguito Volcano, Jeffrey B. Johnson, Andrew J. L. Harris, Steve T. M. Sahetapy-Engel, Rudiger Wolf, William I. Rose

Department of Geological and Mining Engineering and Sciences Publications

In Jan. 2003 we monitored explosions at Santiaguito Volcano (Guatemala) with thermal, infrasonic, and seismic sensors. Thermal data from 2 infrared thermometers allowed computation of plume rise speeds, which ranged from 8 to 20 m/s. Rise rates correlated with cumulative thermal radiance, indicating that faster rising plumes correspond to explosions with greater thermal flux. The relationship between rise speeds and elastic energy is less clear. Seismic radiation may not scale well with thermal output and/or rise speed because some of the thermal component may be associated with passive degassing, which does not induce significant seismicity. But non-impulsive gas release is …

Method Of Making Wood-Based Composite Board, Laurent Malanda Matuana, Julia A. King

Michigan Tech Patents

A wood composite board or panel, such as particleboard, fiberboard, oriented strand board or waferboard and a method of producing the same. The composite board or panel comprises a plurality of wood pieces, thermoset resin to bind the wood pieces and a filler having a high thermal conductivity. Examples of such a filler include natural and synthetic graphites, metal, carbon, silicon carbide and other similar compounds and their mixtures.

Snow Groomer Assembly, Philip J. Quenzi, Russell G. Alger

Michigan Tech Patents

A snow groomer includes a movable platform, a prime mover mounted to the platform and a grooming drum rotatably driven by the prime mover for rotation in a direction opposite the traveling direction of the snow groomer. The grooming drum includes axially spaced apart and radially protruding ribs that extend circumferentially around the drum. The ribs include circumferentially spaced apart apertures and the apertures of each rib are aligned with the apertures of the other ribs. Elongated cutting teeth extend through the apertures of the ribs and have a cross-sectional area that is smaller than the apertures such that the …

Me-Em 2004 Annual Report, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering Annual Reports

Table of Contents

• Overview
• Mission, Vision, and Strategic Plan
• Enrollment and Expenditure Data
• Faculty & Staff
• Industrial Advisory Committee
• Students
• Academic Programs
• Alumni
• Donations
• Contracts & Grants
• Graduates
• Publications

Algorithms For Autonomous Tandem Operation Of A Dual M113 System, Jared L. Dinkel

Dissertations, Master's Theses and Master's Reports - Open

In mid-July 2003, the U.S. Army Tank-Automotive & Armaments Command (TACOM) performed a series of experiments at Keweenaw Research Center (KRC), with a remote operated mine roller system. This system, named Panther Lite, consists of two M113 Armored Personnel Carriers (APC’s) connected by a Tandem Vehicle Linkage Assembly (TVLA). The system has three sets of mine rollers, two of which are connected to the front of the lead vehicle with one set trailing from the trail vehicle. Currently, the system requires two joystick controllers. One regulates the braking of the tracks, throttle, and transmission of the lead vehicle and …

Bluetooth Enabled Ad-Hoc Networks: Performance Evaluation Of A Self-Healing Scatternet Formation Protocol, Rade Trimceski

Dissertations, Master's Theses and Master's Reports - Open

Bluetooth wireless technology is a robust short-range communications system designed for low power (10 meter range) and low cost. It operates in the 2.4 GHz Industrial Scientific Medical (ISM) band and it employs two techniques for minimizing interference: a frequency hopping scheme which nominally splits the 2.400 - 2.485 GHz band in 79 frequency channels and a time division duplex (TDD) scheme which is used to switch to a new frequency channel on 625 μs boundaries. During normal operation a Bluetooth device will be active on a different frequency channel every 625 μs, thus minimizing the chances of continuous interference …

Optimal Design Of Pump And Treat Remediation Systems : Treatment Modeling, Source Modeling And Time As A Decision Variable, Karen L. Endres

Dissertations, Master's Theses and Master's Reports - Open

Groundwater optimization and simulation is a maturing science. Research work contained in this thesis extends into areas that have not been fully explored. The incorporation of source and treatment systems selection and design produces information to help decision makers. Further insight is gained by evaluating some of the requirements and standards enforced by regulations such as, remediation time.

The technical aspects of a remediation system are set by the physical properties and the regulatory constraints enforced. As an example, the addition of a realistic treatment system gives more accurate cost estimates, but the pump and treat (PAT) systems parameters do …

Design And Implementation Of A 3d Computer Game Controller Using Inertial Mems Sensors, Ali Pezeshk

Dissertations, Master's Theses and Master's Reports - Open

Though 3D computer graphics has seen tremendous advancement in the past two decades, most available mechanisms for computer interaction in 3D are high cost and targeted for industry and virtual reality applications. Recent advances in Micro-Electro-Mechanical-System (MEMS) devices have brought forth a variety of new low-cost, low-power, miniature sensors with high accuracy, which are well suited for hand-held devices. In this work a novel design for a 3D computer game controller using inertial sensors is proposed, and a prototype device based on this design is implemented. The design incorporates MEMS accelerometers and gyroscopes from Analog Devices to measure the three …

Veneer-Based Product And Method Of Manufacture, Laurent Malanda Matuana, Julia A. King

Michigan Tech Patents

A veneer-based product is made of a plurality of veneer layers, a resin binding the layers, and a filler having a high thermal conductivity.

Compositions And Methods For Wood Preservation, Peter Laks, Patricia Heiden

Michigan Tech Patents

The invention provides a method for incorporating biocides into wood or a wood product. The method comprises incorporating an additive into a nanoparticle, applying the nanoparticle to wood or a wood particle and applying sufficient pressure to force the nanoparticle to penetrate the wood or wood particle.

Sizes And Shapes Of 10-Ma Distal Fall Pyroclasts In The Ogallala Ggroup, Nebraska, William I. Rose, C. M. Riley, S. Dartevelle

Department of Geological and Mining Engineering and Sciences Publications

Size distributions of distal ashfall particles from correlated 10-Ma layers in Nebraska, measured using laser diffraction methods, are lognormal with mode diameters of ∼90 mm. This ashfall is ∼100% bubble-wall shards of rhyolite glass and apparently represents a distal ashfall from an eruption 1400 km away. Measured terminal velocities of these ash particles are 0.2–18 cm/s, consistent with Stokes Law settling of spherical particles with diameters of 9–50 mm. Surface area of the ash particles, measured with gas adsorption, is 20–30 times the surface area of equivalent Stokes spheres. These results highlight the effects of shape and atmospheric drag in …

Quantitative Shape Measurements Of Distal Volcanic Ash, William I. Rose, Colleen M. Riley, Gregg J. Bluth

Department of Geological and Mining Engineering and Sciences Publications

Large-scale volcanic eruptions produce fine ash (< 200 μm) which has a long atmospheric residence time (1 hour or more) and can be transported great distances from the volcanic source, thus, becoming a hazard to aircraft and public health. Ash particles have irregular shapes, so data on particle shape, size, and terminal velocities are needed to understand how the irregular-shaped particles affect transport processes and radiative transfer measurements. In this study, a methodology was developed to characterize particle shapes, sizes , and terminal velocities for three ash samples of different compositions. The shape and size of 2,500 particles from 1) distal fallout (~100 km) of the October 14, 1974 Fuego eruption (basaltic), 2) the secondary maxima (~250 km) of the August 18, 1992 Spurr eruption (andesitic), and 3) the Miocene Ash Hollow member, Nebraska (rhyolitic) were measured using image analysis techniques. Samples were sorted into 10 to 19 terminal velocity groups (0.6-59.0 cm/s) using an air elutriation device. Grain size distributions for the samples were measured using laser diffraction. Aspect ratio, feret diameter, and perimeter measurements were found to be the most useful descriptors of how particle shape affects terminal velocity. These measurement values show particle shape differs greatly from a sphere (commonly used in models and algorithms). The diameters of ash particles were 10-120% larger than ideal spheres at the same terminal velocity, indicating that irregular particle shape greatly increases drag. Gas-adsorption derived surface areas are 1 to 2 orders of magnitude higher than calculated surface areas based on measured dimensions and simple geometry, indicating that particle shapes are highly irregular. Correction factors for surface area were derived from the ash sample measurements so that surface areas calculated by assuming spherical particle shapes can be corrected to reflect more realistic values.

Retrieval Of Mass And Sizes Of Particles In Sandstorms Using Two Modis Ir Bands: A Case Study Of April 7 2001 Sandstorm In China, Yingxin Gu, William I. Rose, Gregg J. Bluth

Department of Geological and Mining Engineering and Sciences Publications

A thermal infrared remote sensing retrieval method developed by Wen and Rose [1994], which retrieves particle sizes, optical depth, and total masses of silicate particles in the volcanic cloud, was applied to an April 07, 2001 sandstorm over northern China, using MODIS. Results indicate that the area of the dust cloud observed was 1.34 million km2, the mean particle radius of the dust was 1.44 μm, and the mean optical depth at 11 μm was 0.79. The mean burden of dust was approximately 4.8 tons/km2 and the main portion of the dust storm on April 07, 2001 contained 6.5 million …

Reynolds-Stress Turbulence Model In The Kiva Code For Engine Simulation, Yeow-Khern Siow

Dissertations, Master's Theses and Master's Reports - Open

A Reynolds-Stress Turbulence Model has been incorporated with success into the KIVA code, a computational fluid dynamics hydrocode for three-dimensional simulation of fluid flow in engines. The newly implemented Reynolds-stress turbulence model greatly improves the robustness of KIVA, which in its original version has only eddy-viscosity turbulence models. Validation of the Reynolds-stress turbulence model is accomplished by conducting pipe-flow and channel-flow simulations, and comparing the computed results with experimental and direct numerical simulation data. Flows in engines of various geometry and operating conditions are calculated using the model, to study the complex flow fields as well as confirm the model’s …

Topographic And Meteorological Influences On Spatial Scaling Of Heavy Convective Rainfall In Mountainous Regions, Antonio Rubert Godoy

Dissertations, Master's Theses and Master's Reports - Open

Characterizing the spatial scaling and dynamics of convective precipitation in mountainous terrain and the development of downscaling methods to transfer precipitation fields from one scale to another is the overall motivation for this research. Substantial progress has been made on characterizing the space-time organization of Midwestern convective systems and tropical rainfall, which has led to the development of statistical/dynamical downscaling models. Space-time analysis and downscaling of orographic precipitation has received less attention due to the complexities of topographic influences. This study uses multiscale statistical analysis to investigate the spatial scaling of organized thunderstorms that produce heavy rainfall and flooding in …

Evaluating The Usefulness Of Soil Moisture (Forecasts) In Streamflow Prediction For Central Texas , Mohammed Mahmoud

Dissertations, Master's Theses and Master's Reports - Open

The past decade has brought significant advancements in seasonal climate forecasting. However, water resources decision support and management continues to be based almost entirely on historical observations and does not take advantage of climate forecasts. This study builds on previous work that conditioned streamflow ensemble forecasts on observable climate indicators, such as the El Niño-Southern Oscillation (ENSO) and the Pacific Decadal Oscillation (PDO) for use in a decision support model for the Highland Lakes multi-reservoir system in central Texas operated by the Lower Colorado River Authority (LCRA). In the current study, seasonal soil moisture is explored as a climate indicator …

Climatological Study Of Transport To The Pico-Nare Site Using Atmospheric Backward Trajectories, Robert Christopher Owen

Dissertations, Master's Theses and Master's Reports - Open

This study developed a transport climatology to the PICO-NARE station, in the central North Atlantic Ocean, using a 40-year set of atmospheric back trajectories. The trajectory set was subjected to a cluster analysis in order to group trajectories into six flow patterns, or clusters. An air flow probability analysis was conducted in conjunction with the cluster analysis in order to determine the source regions for flow to the site. Seasonal differences in the flow patterns were found, which included enhanced westerly flow in the winter, decreased westerly flow in the summer, and spring and fall having moderate westerly flow. The …

Selected Chemoautotrophic Processes In Wastewater Treatment: Low Temperature Nitrification Inhibition By An Azo Dye And Biofiltration For Odor Control Of Hydrogen Sulfide, Ronald W. Martin Jr.

Dissertations, Master's Theses and Master's Reports - Open

Biochemical processes by chemoautotrophs such as nitrifiers and sulfide and iron oxidizers are used extensively in wastewater treatment. The research described in this dissertation involved the study of two selected biological processes utilized in wastewater treatment mediated by chemoautotrophic bacteria: nitrification (biological removal of ammonia and nitrogen) and hydrogen sulfide (H2S) removal from odorous air using biofiltration.

A municipal wastewater treatment plant (WWTP) receiving industrial dyeing discharge containing the azo dye, acid black 1 (AB1) failed to meet discharge limits, especially during the winter. Dyeing discharge mixed with domestic sewage was fed to sequencing batch reactors at 22oC and 7oC. …

Reaction Control In Quiescent Systems Of Free-Radical Retrograde-Precipitation Polymerization, Vijaya Raghavan Tirumala

Dissertations, Master's Theses and Master's Reports - Open

Free-radical retrograde-precipitation polymerization, FRRPP in short, is a novel polymerization process discovered by Dr. Gerard Caneba in the late 1980s. The current study is aimed at gaining a better understanding of the reaction mechanism of the FRRPP and its thermodynamically-driven features that are predominant in controlling the chain reaction.

A previously developed mathematical model to represent free radical polymerization kinetics was used to simulate a classic bulk polymerization system from the literature. Unlike other existing models, such a sparse-matrix-based representation allows one to explicitly accommodate the chain length dependent kinetic parameters.

Extrapolating from the past results, mixing was experimentally shown …

Experimental Investigation Of Cavitation Signatures In An Automotive Torque Converter Using A Microwave Telemetry Technique, Carl L. Anderson, L. Zeng, P. O. Sweger, Amitabh Narain, Jason R. Blough

Department of Mechanical and Aerospace Engineering Publications

A unique experimental investigation of cavitation signatures in an automotive torque converter under stall conditions is reported. A quantitative criterion is proposed for predicting early and advanced cavitation in terms of suitable nondimensional pump speeds. The dimensionless pump speed that marks early cavitation is obtained by relating this parameter to the appearance of charge-pressure–dependent pressure fluctuations in the differential pressure transducer readings. The differential pressure transducers were mounted at well-defined locations in the pump passage of a torque converter. The data were transmitted by a wireless telemetry system mounted on the pump housing. Data were received and processed by a …

Methods Of Modifying Lignin In Plants By Transformation With A 4-Coumarate Coenzyme A Ligase Nucleic Acid, Vincent Lee C. Chiang, Chung-Jui Tsai, Wen-Jing Hu

Michigan Tech Patents

The invention pertains to methods of altering growth, lignin content, coniferyl and sinapyl alcohol units in the lignin structure, disease resistance and cellulose content in plants by transformation with a lignin pathway p-coumarate Co-enzyme A ligase (4CL) nucleic acid.

Spinal Fixation System, Matthew N. Songer, Jeffrey D. Vlahos, Thomas S. Kilpela, Gopal Jayaraman

Michigan Tech Patents

An implantable, spinal, vertebral replacement device comprises a tubular cage for fitting into a space left by a missing vertebral body and for optionally retaining bone graft material. First and second transverse plates are respectively positioned at opposed ends of the tubular cage for supporting the respective cage ends and for pressing a plate face against an adjacent vertebral body in spinal columnsupporting relation. The transverse plates are each joined in transverse relation to at least one vertebral attachment plate which, in use, extends generally parallel to the spine. The vertebral attachment plate defines screw holes for screw securance to …

Apparatus And Method For Determining The Dynamic Indentation Hardness Of Materials, Ghatu Subhash, Abhijit Chandra, Brian J. Koeppel

Michigan Tech Patents

An apparatus and method for determining dynamic indentation hardness values of a material using a propagating stress wave to make an indentation in the material. The invention provides such values without any prior knowledge of the material properties and enables the dynamic indentation hardness values to be directly compared to static indentation hardness values for the material.

Parameter Estimation For Transformer Modeling, Sung Don Cho

Dissertations, Master's Theses and Master's Reports - Open

Large Power transformers, an aging and vulnerable part of our energy infrastructure, are at choke points in the grid and are key to reliability and security. Damage or destruction due to vandalism, misoperation, or other unexpected events is of great concern, given replacement costs upward of $2M and lead time of 12 months. Transient overvoltages can cause great damage and there is much interest in improving computer simulation models to correctly predict and avoid the consequences.

EMTP (the Electromagnetic Transients Program) has been developed for computer simulation of power system transients. Component models for most equipment have been developed and …

Method For Removal Of Ammonia From Fly Ash, Jiann-Yang Hwang

Michigan Tech Patents

A method for removing ammonia and ammonia compounds from fly ash and other combustion by-products is provided. The method may be performed with raw or processed fly ash, or it may be performed in conjunction with a wet beneficiation process. The method involves mixing the ammonia-contaminated fly ash with water and then filtering and/or drying the solution to remove the ammonia and water. The method produces fly ash having an ammonia content of less than about 60-80 ppm, which allows the fly ash to be utilized in a number of applications.

Apparatus And Method For Three-Dimensional Contouring, Carl B. Kieranen, Charles A. Hallstrom, Glen R. Simula, Nils P. Ruonavaara, James D. Waineo

Michigan Tech Patents

A contouring device and method for contouring three- dimensionally curved surfaces includes an elongated contouring assembly that is supported at opposite ends by a pair of fluid cylinders. The fluid cylinders are controlled to raise and lower the ends of the contouring assembly independently of each other, thereby allowing the contouring assembly to create a three-dimensionally curved surface as it passes over an area to be contoured. The control of one of the fluid cylinders is based on a comparison of the measured position of a first end of the contouring assembly with a profile of the surface to be …