Engineering Commons^™

Controlling Optical Absorption In Metamaterial Absorbers For Plasmonic Solar Cells, Wyatt Adams, Ankit Vora, Jephias Gwamuri, Joshua M. Pearce, Durdo O. Guney

Department of Materials Science and Engineering Publications

Metals in the plasmonic metamaterial absorbers for photovoltaics constitute undesired resistive heating. However, tailoring the geometric skin depth of metals can minimize resistive losses while maximizing the optical absorbance in the active semiconductors of the photovoltaic device. Considering experimental permittivity data for InxGa1-xN, absorbance in the semiconductor layers of the photovoltaic device can reach above 90%. The results here also provides guidance to compare the performance of different semiconductor materials. This skin depth engineering approach can also be applied to other optoelectronic devices, where optimizing the device performance demands minimizing resistive losses and power consumption, such as photodetectors, laser diodes, …

Map-Aware Adaptive Automotive Radar, Jae Seung Lee, Nikola Steven Subotic, James Paul Ebling, Helen Kourous-Harrigan

Michigan Tech Patents

A dedicated short range radar system is provided for use with a GPS system. The radar system includes a transmitter which transmits a microwave radio signal. A receiver is coupled to a horizontally scanning receiver antenna array which receives an echo, if present, from the radio signal transmitted by the transmitter. The radio receiver then generates an output signal representative of the echo. A control circuit then receives the output signal from the antenna array as well as the output signal from the GPS system. The control circuit then varies the mode of operation of the receiver and/or the transmitter …

Open-Source Photometric System For Enzymatic Nitrate Quantification, Ben T. Wittbrodt, D. A. Squires, J. Walbeck, E. Campbell, W. H. Campbell, Joshua M. Pearce

Department of Materials Science and Engineering Publications

Nitrate, the most oxidized form of nitrogen, is regulated to protect people and animals from harmful levels as there is a large over abundance due to anthropogenic factors. Widespread field testing for nitrate could begin to address the nitrate pollution problem, however, the Cadmium Reduction Method, the leading certified method to detect and quantify nitrate, demands the use of a toxic heavy metal. An alternative, the recently proposed Environmental Protection Agency Nitrate Reductase Nitrate-Nitrogen Analysis Method, eliminates this problem but requires an expensive proprietary spectrophotometer. The development of an inexpensive portable, handheld photometer will greatly expedite field nitrate analysis to …

Capturing Optically Important Constituents And Properties In A Marine Biogeochemical And Ecosystem Model, S. Dutkiewicz, A. E. Hickman, O. Jahn, W. W. Gregg, C. B. Mouw, M. J. Follows, C. Mouw

Michigan Tech Publications, Part 1

We present a numerical model of the ocean that couples a three-stream radiative transfer component with a marine biogeochemical-ecosystem component in a dynamic three-dimensional physical framework. The radiative transfer component resolves the penetration of spectral irradiance as it is absorbed and scattered within the water column. We explicitly include the effect of several optically important water constituents (different phytoplankton functional types; detrital particles; and coloured dissolved organic matter, CDOM). The model is evaluated against in situ-observed and satellite-derived products. In particular we compare to concurrently measured biogeochemical, ecosystem, and optical data along a meridional transect of the Atlantic Ocean. The …

Seasonal Variability Of Atmospheric Nitrogen Oxides And Non-Methane Hydrocarbons At The Geosummit Station, Greenland, L. J. Kramer, D. Helmig, J. F. Burkhart, A. Stohl, S. Oltmans, R. E. Honrath

Michigan Tech Publications, Part 1

Measurements of atmospheric nitrogen oxides NOx (NOx = NO + NO2), peroxyacetyl nitrate (PAN), NOy, and non-methane hydrocarbons (NMHC) were taken at the Greenland Environmental Observatory at Summit (GEOSummit) station, Greenland (72.34° N, 38.29° W; 3212 m a.s.l.), from July 2008 to July 2010. The data set represents the first year-round concurrent record of these compounds sampled at a high latitude Arctic site. Here, the study focused on the seasonal variability of these important ozone (O3) precursors in the Arctic troposphere and the impact from transported anthropogenic and biomass burning emissions. Our analysis shows that PAN is the dominant NOy …

Low-Cost Open-Source Voltage And Current Monitor For Gas Metal Arc Weld 3d Printing, Anthony Pinar, Bas Wijnen, Gerald C. Anzalone, Timothy C. Havens, Paul G. Sanders, Joshua M. Pearce

Department of Materials Science and Engineering Publications

Arduino open-source microcontrollers are well known in sensor applications for scientific equipment and for controlling RepRap 3D printers. Recently low-cost open-source gas metal arc weld (GMAW) RepRap 3D printers have been developed. The entry-level welders used have minimal controls and therefore lack any real-time measurement of welder voltage or current. The preliminary work on process optimization of GMAW 3D printers requires a low-cost sensor and data logger system to measure welder current and voltage. This paper reports on the development of a low-cost open-source power measurement sensor system based on Arduino architecture. The sensor system was designed, built, and tested …

High Resolution Doppler Collision Avoidance Radar, Jae Seung Lee, Paul Donald Schmalenberg, Nikola Steven Subotic, James Paul Ebling

Michigan Tech Patents

An example radar apparatus has a transmission frequency modulated by a chirp waveform having three chirp segments, including increasing, decreasing, and a constant frequency segments. The chirp waveform may extend over the full revisit time of the radar beam. The frequency difference between the transmitted and echo signals are determined at least once per chirp segment. Example apparatus include a Doppler radar for vehicle use.

Spatial Analysis Of Mount St. Helens Tephra Leachate Compositions: Implications For Future Sampling Strategies, P. M. Ayris, P. Delmelle, B. Pereira, E. C. Maters, D. E. Damby, A. J. Durant, D. B. Dingwell

Michigan Tech Publications, Part 1

Tephra particles in physically and chemically evolving volcanic plumes and clouds carry soluble sulphate and halide salts to the Earth’s surface, ultimately depositing volcanogenic compounds into terrestrial or aquatic environments. Upon leaching of tephra in water, these salts dissolve rapidly. Previous studies have investigated the spatial and temporal variability of tephra leachate compositions during an eruption in order to gain insight into the mechanisms of gas-tephra interaction which emplace those salts. However, the leachate datasets analysed are typically small and may poorly represent the natural variability and complexity of tephra deposits. Here, we have conducted a retrospective analysis of published …

Me-Em Enewsbrief, June 2015, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Life-Cycle Energy And Ghg Emissions Of Forest Biomass Harvest And Transport For Biofuel Production In Michigan, Fengli Zhang, Dana M. Johnson, Jinjiang Wang

College of Business Publications

High dependence on imported oil has increased U.S. strategic vulnerability and prompted more research in the area of renewable energy production. Ethanol production from renewable woody biomass, which could be a substitute for gasoline, has seen increased interest. This study analysed energy use and greenhouse gas emission impacts on the forest biomass supply chain activities within the State of Michigan. A life-cycle assessment of harvesting and transportation stages was completed utilizing peer-reviewed literature. Results for forest-delivered ethanol were compared with those for petroleum gasoline using data specific to the U.S. The analysis from a woody biomass feedstock supply perspective uncovered …

Sensing Based On Fano-Type Resonance Response Of All-Dielectric Metamaterials, Elena Semouchkina, Ran Duan, George Semouchkin, Ravindra Pandey

Michigan Tech Publications, Part 1

A new sensing approach utilizing Mie resonances in metamaterial arrays composed of dielectric resonators is proposed. These arrays were found to exhibit specific, extremely high-Q factor (up to 15,000) resonances at frequencies corresponding to the lower edge of the array second transmission band. The observed resonances possessed with features typical for Fano resonances (FRs), which were initially revealed in atomic processes and recently detected in macro-structures, where they resulted from interference between local resonances and a continuum of background waves. Our studies demonstrate that frequencies and strength of Fano-type resonances in all-dielectric arrays are defined by interaction between local Mie …

The Circuit, Spring 2015, Department Of Electrical And Computer Engineering, Michigan Technological University

Department of Electrical and Computer Engineering Newsletters

Table of Contents:

• Department News
• Research News
• Alumni Spotlight
• Faculty News
• Students

Black Bear Parathyroid Hormone And Methods Of Using Black Bear Parathyroid Hormone, Seth W. Donahue

Michigan Tech Patents

Black bear parathyroid hormone (PTH) and functional fragments thereof are provided. Also provided are methods of using black bear PTH and functional fragments for increasing cAMP in a bone-forming cell; reducing apoptosis in a bone-forming cell; decreasing the ratio of expression levels of Bax protein to Bcl-2 protein in a bone-forming cell; increasing the expression level of one or more of a bone matrix protein, a transcriptional activator, or a transcriptional regulator in a bone-forming cell; enhancing bone mineral density, increasing bone mass, decreasing bone loss, or reducing the incidence of bone fractures, or any combination thereof, in a subject; …

The Application Of Biomedical Engineering Techniques To The Diagnosis And Management Of Tropical Diseases: A Review, Fatimah Ibrahim, Tzer Hwai Gilbert Thio, Tarig Faisal, Michael Neuman

Michigan Tech Publications, Part 1

This paper reviews a number of biomedical engineering approaches to help aid in the detection and treatment of tropical diseases such as dengue, malaria, cholera, schistosomiasis, lymphatic filariasis, ebola, leprosy, leishmaniasis, and American trypanosomiasis (Chagas). Many different forms of non-invasive approaches such as ultrasound, echocardiography and electrocardiography, bioelectrical impedance, optical detection, simplified and rapid serological tests such as lab-on-chip and micro-/nano-fluidic platforms and medical support systems such as artificial intelligence clinical support systems are discussed. The paper also reviewed the novel clinical diagnosis and management systems using artificial intelligence and bioelectrical impedance techniques for dengue clinical applications.

Railroad Capacity Tools And Methodologies In The U.S. And Europe, Hamed Pouryousef, Pasi Lautala, Thomas White

Michigan Tech Publications, Part 1

A growing demand for passenger and freight transportation, combined with limited capital to expand the United States (U.S.) rail infrastructure, is creating pressure for a more efficient use of the current line capacity. This is further exacerbated by the fact that most passenger rail services operate on corridors that are shared with freight traffic. A capacity analysis is one alternative to address the situation and there are various approaches, tools, and methodologies available for application. As the U.S. continues to develop higher speed passenger services with similar characteristics to those in European shared-use lines, understanding the common methods and tools …

Me-Em Enewsbrief, March 2015, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Ring-Opening Polymerization Of Ε-Caprolactone Initiated By Ganciclovir (Gcv) For The Preparation Of Gcv-Tagged Polymeric Micelles, Alicia J. Sawdon, Ching-An Peng

Michigan Tech Publications, Part 1

Ganciclovir (GCV) is a nucleoside analogue with antiviral activity against herpes viral infections, and the most widely used antiviral to treat cytomegalovirus infections. However, the low bioavailability and short half-life of GCV necessitate the development of a carrier for sustained delivery. In this study, guanosine-based GCV was used as the initiator directly in ring-opening polymerization of ε-caprolactone (ε-CL) to form hydrophobic GCV-poly(caprolactone) (GCV-PCL) which was then grafted with hydrophilic chitosan to form amphiphilic copolymers for the preparation of stable micellar nanoparticles. Successful synthesis of GCV-PCL and GCV-PCL-chitosan were verified by ¹H-NMR analysis. Self-assembled micellar nanoparticles were characterized by dynamic …

Sensitivity Analysis Of Longitudinal Cracking On Asphalt Pavement Using Mepdg In Permafrost Region, Chen Zhang, Hainian Wang, Zhanping You, Biao Ma

Michigan Tech Publications, Part 1

Longitudinal cracking is one of the most important distresses of asphalt pavement in permafrost regions. The sensitivity analysis of design parameters for asphalt pavement can be used to study the influence of every parameter on longitudinal cracking, which can help optimizing the design of the pavement structure. In this study, 20 test sections of Qinghai–Tibet Highway were selected to conduct the sensitivity analysis of longitudinal cracking on material parameter based on Mechanistic-Empirical Pavement Design Guide (MEPDG) and single factorial sensitivity analysis method. Some computer aided engineering (CAE) simulation techniques, such as the Latin hypercube sampling (LHS) technique and the multiple …

Stratospheric Volcanic Ash Emissions From The 13 February 2014 Kelut Eruption, N. I. Kristiansen, A. J. Prata, A. Stohl, S. A. Carn

Michigan Tech Publications, Part 1

Mount Kelut (Indonesia) erupted explosively around 15:50 UT on 13 February 2014 sending ash and gases into the stratosphere. Satellite ash retrievals and dispersion transport modeling are combined within an inversion framework to estimate the volcanic ash source term and to study ash transport. The estimated source term suggests that most of the ash was injected to altitudes of 16-17km, in agreement with space-based lidar data. Modeled ash concentrations along the flight track of a commercial aircraft that encountered the ash cloud indicate that it flew under the main ash cloud and encountered maximum ash concentrations of 9±3mgm-3, mean concentrations …

Electrical And Computer Engineering Annual Report 2015, Department Of Electrical And Computer Engineering, Michigan Technological University

Department of Electrical and Computer Engineering Annual Reports

• Faculty Directory
• Faculty Awards
• Google ATAP—Michigan Tech MURA
• The Sound Beneath the Surface
• Advancing Microgrid Deployment
• Clearing the Air
• Power in Their Hands
• Faculty Publications
• Graduate Student Highlights
• Staff Profile—Chito Kendrick
• New ECE Concentrations
• SLAM Systems
• Senior Design and Enterprise
• External Advisory Committee
• Contracts and Grants
• Departmental Statistics
• Lind Memorial Endowed Fellowship

2015 Civil And Environmental Engineering Department News, Department Of Civil And Environmental Engineering, Michigan Technological University

Department of Civil, Environmental, and Geospatial Engineering Newsletters

Table of Contents

• Student Awards
• Faculty News
• Research Projects
• Alumni News
• Department News
• Academy of Civil and Environmental Engineers
• CEE Donor Recognition

Mse Annual Report 2015, Department Of Materials Science And Engineering, Michigan Technological University

Department of Materials Science and Engineering Annual Reports

Table of Contents

• Faculty and Staff News
• Faculty Research
• Student News
• Senior Design Teams
• Outreach
• Alumni News
• MSE by the Numbers
• Endowed Professorships

Double Vault Composting Latrines In Rural Paraguay : Feasible Construction And Optimal Use, Paul T. Pebler

Dissertations, Master's Theses and Master's Reports - Open

Water resource depletion and sanitation are growing problems around the world. A solution to both of these problems is the use of composting latrines, as it requires no water and has been recommended by the World Health Organization as an improved sanitation technology. However, little analysis has been done on the decomposition process occurring inside the latrine, including what temperatures are reached and what variables most affect the composting process. Having better knowledge of how outside variables affect composting latrines can aid development workers on the choice of implementing such technology, and to better educate the users on the appropriate …

Electrochemical Processes In Microfluidics Systems Under Ac Electric Fields, Ran An

Dissertations, Master's Theses and Master's Reports - Open

Alternating current (AC) electric signal has been widely applied in microfluidic systems to induce AC electrokinetic behavior. AC electrokinetic phenomena including AC electrophoresis, AC dielectrophoresis, AC electroosmosis flow and AC electrothermal flow are widely applied in (bio)particle sorting, separation and concentration and micropumps. However, numbers of non-ideal AC electrokinetic behaviors have been reported: human erythrocyte deformation in AC dielectrophoresis system has been observed; flow reversal in AC electroosmosis flow pumps has also been reported. In this dissertation, a systematic study on human erythrocyte crenation in AC dielectrophoresis system was firstly conducted. Multiple possible physical mechanisms inducing cell crenation including temperature, …

A Field Investigation Of Composite Mud Brick Compressive Strength, Kevin D. Hale

Dissertations, Master's Theses and Master's Reports - Open

It has been highlighted in numerous publications that in the field of earth construction there is a strong disconnect between experimental work in the laboratory and its application in the field. The current study attempts to help bridge this gap with a field test conducted in Nampula, Mozambique. Mud bricks were made with a simple hand mold and reinforced with bamboo and straw fibers. Fibers were cut into lengths of 3 cm and 6 cm while being mixed in fractions of 0.125%, 0.25% and 0.50% by weight and compressive strength was measured using an application of the 3-point bending test. …

Undergraduate Education 2015, College Of Engineering, Michigan Technological University

Michigan Tech Engineering Magazine

Table of Contents

• Research
• International
• Design

Me-Em 2014-15 Annual Report, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering Annual Reports

Table of Contents

• Human-centered Engineering
• Endowed Department Chair
• Enrollment & Degrees
• Graduates
• Department News
• Faculty & Staff
• Alumni
• Donors
• Contracts & Grants
• Patents & Publications
• Faculty & Staff Directory

Gelatin Microgel Incorporated Poly (Ethylene Glycol) Bioadhesive With Enhanced Adhesive Property And Bioactivity, Yuting Li

Dissertations, Master's Theses and Master's Reports - Open

In this study, chemically crosslinked gelatin microgels were incorporated into dopamine-modified poly (ethylene glycol) (PEGDM) adhesive to form composite bioadhesive with simultaneously improved adhesive property and bioactivity. Gelatin microgel, with an average diameter of 53.6±14.2μm, was prepared with water in oil emulsification method and chemically crosslinked with
1-ethyl-3-[3-dimethylaminopropyl]carbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS). Gelatin microgels were incorporated into PEGDM adhesive precursor solution at 1.5wt%, 3.75wt% and 7.5wt%. The cure time of adhesive reduced from 54 seconds to 37 seconds with increasing gelatin microgel content. Additionally, the incorporation of the gelatin microgel also increased the crosslinking density of the adhesive network …

Development Of A Cell Morphological Analysis Tool To Evaluate The Ultrasound Vibrational Effects On Cell Adhesion, Joseph M. Smith

Dissertations, Master's Theses and Master's Reports - Open

Fibroblast encapsulation is a stage of the wound healing process in which the implanted device is separated from the biological environment due to the formation of fibrotic tissue. Uncontrolled adhesion of fibroblasts, called fibrosis, has the ability to inhibit an implanted device’s functionality over its lifetime. Over time, fibroblasts have been shown to cause loosening and failure of bone-anchor implants which could include the possibility of harming the patient. The encapsulating process could also hinder the sensitivity of implanted biosensors operating in the body for continuous monitoring. Unfortunately, the antifouling surfaces which are commonly used on implanted devices to control …

Development Of Hardware-In-The-Loop Simulation System For Electric Power Steering Controller Testing, Chuanliangzi Liu

Dissertations, Master's Theses and Master's Reports - Open

The Electronic Control Unit (ECU) of an Electric Power Steering (EPS) system is a core device to decide how much assistance an electric motor applies on steering wheel. EPS ECUs play an important role in EPS systems. The effectiveness of EPS ECUs needs to be thoroughly tested before mass production. Hardware-in-the-loop (HIL) simulation provides an efficient way for the development and testing of embedded controllers. This report focuses on the development of HIL system for testing EPS controllers. The hardware of the HIL system employs a dSPACE HIL simulator. The EPS plant model is an integrated model consisting of Vehicle …