Engineering Commons^™

Reactivity Of Hydroxyl Radical: Mechanistic Insight Into The Reactivity With Dissolved Organic Matter, Mallika Khare

Dissertations, Master's Theses and Master's Reports

Advanced Oxidation Processes (AOPs) that produce highly reactive hydroxyl radicals (HO•) are attractive and promising water and wastewater treatment technologies because HO• can destroy a variety of organic compounds. However, background dissolved organic matter (DOM) significantly reduces the performance of AOPs by scavenging HO•. The conventional experimental approach to identifying ‘average’ reactivity limits our mechanistic understanding of the reaction of HO• with complex mixture of surrogate DOM. This is the first study to use quantum mechanical methods to understand the elementary reactions of HO• with a model monomer of DOM. “Temple Northeastern Birmingham model” (TNB). The theoretically calculated aqueous-phase free …

Risk-Based Assessment And Strengthening Of Electric Power Systems Subjected To Natural Hazards, Abdullahi Salman

Dissertations, Master's Theses and Master's Reports

Modern economic and social activities are dependent on a complex network of infrastructure systems that are highly interdependent. Electric power systems form the backbone of such complex network as most civil infrastructure systems cannot function properly without reliable power supply. Electric power systems are vulnerable to extensive damage due to natural hazards, as evident in recent hazard events. Hurricanes, earthquakes, floods, tornados and other natural hazards have caused billions of dollars in direct losses due to damage to power systems and indirect losses due to power outages, as well as social disruption. There is, therefore, a need for a comprehensive …

Mechanical Testing Of Fused Filament 3-D Printed Components For Distributed Manufacturing, Nagendra Gautam Tanikella

Dissertations, Master's Theses and Master's Reports

Fused filament fabrication (FFF)-based open-source 3-D printers offer the potential of decentralized manufacturing both in developing and developed countries. Unfortunately, a severe lack of data and standards relating to material properties and printed components limit this potential. This thesis first investigates the mechanical properties of a wide-range of FFF materials and provides a database of mechanical strength of the materials tested. The results demonstrate that the tensile strength of a 3-D printed specimen depends largely on the mass of the specimen, which provides a means to estimate the strength of 3-D printed components. Then this information is used to evaluate …

High Resolution Time-Of-Arrival Ranging Of Wireless Sensor Nodes In Non-Homogenous Environments, Mohsen Jamalabdollahi

Dissertations, Master's Theses and Master's Reports

Wireless Sensor Networks (WSN) have emerging applications in homogeneous environments such as free space. In addition, WSNs are finding new applications in non-homogeneous (NH) media. All referred applications entail location information of measured data or observed event. Localization in WSNs is considered as the leading remedy, which refers to the procedure of obtaining the sensor nodes relative location utilizing range measurements. Localization via Time-of-Arrival (ToA) estimation has received considerable attention because of high precision and low complexity implementation, however, the traditional techniques are not feasible in NH media due to frequency dispersion of transmitted ranging waveform.

In this work, a …

Evaluating The Anaerobic Codigestion Potential Of Stillage And Dairy Manure In A Tubular Digester, Brad J. Weiss

Dissertations, Master's Theses and Master's Reports

Evaluations of the anaerobic treatment of sugarcane stillage and dairy manure in a low cost tubular digester were performed in small scale batch experiments and using mathematical simulations. A local sensitivity analysis of the model was performed, and key input parameters were adjusted until the predicted COD removal was consistent with data obtained using two full-scale digesters. Simulations were performed to evaluate COD removal and biogas production for nine different mixtures of stillage and manure at four different temperatures ranging from 15˚C to 30˚C. Digestion of stillage alone was not effective, but when codigested with 20% or more manure, COD …

Use Of Lidar In The Design Of Grassed Waterways: Case Study In Agricultural Management In Oklahoma, Annette Sparks

Dissertations, Master's Theses and Master's Reports

Before the advent of Light Detection and Ranging (LiDAR) technology, farm-level infrastructure for sustainable agriculture was designed using topographic maps. LiDAR is a remote sensing method whereby reflected laser pulses are measured to generate high-resolution 3D images of the terrain. This report compares these two methods in the design of grassed waterways for flood drainage and evaluates how the quantitative difference between the two methods can affect the overall hydrologic design. The benefits of LiDAR are expected to be higher accuracy and precision in design, as well as greater reproducibility or consistency, regardless of the designer. To carry out this …

Temporal Trends And Spatial Variabilities Of Pcb Concentrations In Lake Trout From Lake Superior From 1995 To 2013, Hongyi Lin

Dissertations, Master's Theses and Master's Reports

It has been frequently reported that concentrations of PCBs in the Great Lakes fish have declined dramatically since their ban on production and use in 1979 in the United States, although some studies suggested that recent rates of decline are leveling off. In order to examine the temporal trends and spatial variabilities of PCB concentrations in lake trout (Salvelinus namaycush) from Lake Superior during the past two decades, statistical analyses were performed on fish sample data collected by two national agencies (U.S. EPA, Environment and Climate Change Canada) and three state agencies (Michigan Department of Environmental Quality, Minnesota …

Predictive Control Of Power Grid-Connected Energy Systems Based On Energy And Exergy Metrics, Meysam Razmara

Dissertations, Master's Theses and Master's Reports

Building and transportation sectors account for 41% and 27% of total energy consumption in the US, respectively. Designing smart controllers for Heating, Ventilation and Air-Conditioning (HVAC) systems and Internal Combustion Engines (ICEs) can play a key role in reducing energy consumption. Exergy or availability is based on the First and Second Laws of Thermodynamics and is a more precise metric to evaluate energy systems including HVAC and ICE systems. This dissertation centers on development of exergy models and design of model-based controllers based on exergy and energy metrics for grid-connected energy systems including HVAC and ICEs.

In this PhD dissertation, …

Experimental Investigation Of Fast Pyrolysis Of Arundo Donax In A Novel Paddle Reactor, Chintan Desai

Dissertations, Master's Theses and Master's Reports

The main objective of this research was to show the effectiveness of a novel paddle reactor for fast pyrolysis and study the effect of biomass particle size and reaction temperature of Arundo Donax a type of energy crop on the bio-oil yields. The novel paddle reactor showed effective mixing and heat transfer which were proved with the help of studying the residence time and the heating characteristics of the system respectively. The effect of different biomass particle sizes on the bio-oil yield was not significant, the bio-oil yield was approximately 50% for all the sizes. For Arundo Donax particle sizes …

Low Temperature Split Injection Spray Combustion: Ignition, Flame Stabilization And Soot Formation Characteristics In Diesel Engine Conditions, Ahmed Abdul Moiz

Dissertations, Master's Theses and Master's Reports

The aim of the PhD work is to investigate the fundamental differences in combustion behavior when split injections are used in low temperature combustion regime. In this thesis, the first injection is also called as pilot injection and second injection is also called as main injection. The broad aspects which are studied encompassing the investigation is to study the ignition delay, lift-off and soot formation of such a double split spray combustion. The mechanisms of ignition, lift-off and soot production are to be studied since the main ignition and lift-off were found to differ from the pilot which effect net …

Nd2fe14b: (Nd1-X Dyx)2 Fe14b Core-Shell Structure Formation By Hot Press Liquid Phase Sintering, Li Chen

Dissertations, Master's Theses and Master's Reports

The purpose of this project is to produce Nd rich core-Dy rich shell grain structure in liquid phase sintered alloys by consolidating Dy rich powder mixed with powder. The technical barrier to producing the core-shell microstructure is that the Dy composition variations will homogenize during the consolidation process. This dissertation is based on the hypothesis that compositional homogenization of the core-shell structure can be minimized if consolidation occurs under applied pressure (hot press liquid phase sintering). The hypothesis is tested by comparing the homogenization of the Dy composition to the degree of consolidation with and without applied pressure. It is …

A Nocsae Drop Test/ 3d-Fem Study On The Relationship Between Kinematic Response Of The Head, Head Impact Contact Pressure (Hicp) And Kinetic Response Of The Brain To Delineate The Risk Of Traumatic Brain Injuries (Tbi)., Raghavendra Krishna Tej Bhamidipati

Dissertations, Master's Theses and Master's Reports

How many times have you seen a person slip and fall down and had a good laugh about it? How many times we slip and fall down on the floor and got up and walked away thinking everything is normal? Probably we might wonder “Are drops which occur at a small height dangerous?” Yes, they can be. Brain injuries are main reason for the fatality in youth [1], and low level falls are one of the most neglected and understated injuries.

The main objective of this study is to study the response of the brain for low level falls from …

Incorporating Driver’S Behavior Into Predictive Powertrain Energy Management For A Power-Split Hybrid Electric Vehicle, Lei Feng

Dissertations, Master's Theses and Master's Reports

The goal of this series of research is to advance hybrid electric vehicle (HEV) energy management by incorporating driver’s driving behavior and driving cycle information. To reduce HEV fuel consumption, the objectives of this research are divided into the following three parts.

The first part of the research investigates the impact of driver’s behavior on the overall fuel efficiency of a hybrid electric vehicle and the energy efficiency of individual powertrain components under various driving cycles. Between the sticker number fuel economy and actual fuel economy, it is well known that a noticeable difference occur when a driver drives aggressively. …

Restraint System Design And Evaluation For Military Specific Applications, Sebastian Karwaczynski

Dissertations, Master's Theses and Master's Reports

This research focuses on designing an optimal restraint system for usage in a military vehicle applications. The designed restraint system must accommodate a wide range of DHM’s and ATD’s with and without PPE such as: helmet, boots, and body armor. The evaluation of the restraint systems were conducted in a simulated vehicle environment, which was utilized to downselect the ideal restraint system for this program.

In December of 2011 the OCP TECD program was formulated to increase occupant protection. To do this, 3D computer models were created to accommodate the entire Soldier population in the Army. These models included the …

Evaluating Groundwater Recharge In The Saloum Region Of Senegal, Alexander Wohlgemuth

Dissertations, Master's Theses and Master's Reports

Approximately 1.2 billion people in the world live in an area facing physical, or absolute, water scarcity (defined as access to less than 1,000 cubic meters of water). This number is projected to increase to 1.8 billion by the year 2025. Thirty-eight percent of the world’s population lives in arid, semi-arid or dry subhumid regions, which translates to a high dependence on the 30% of the world’s freshwater present in the ground. Further, the rate of water use is increasing rapidly – between two and two and a half times that of population growth, over the last century.

In regions …

Investigation Of The Resistance To Demagnetization In Bulk Rare-Earth Magnets Comprised Of Crystallographically-Aligned, Single-Domain Crystallites With Modified Intergranular Phase, Jie Li

Dissertations, Master's Theses and Master's Reports

The research presented in this dissertation investigates whether an increased coercivity of Neodymium-Iron-Boron (Nd2Fe14B) based bulk magnets at elevated temperature (160°C), which is now only obtainable by substituting ~7wt% dysprosium (Dy) for a portion of neodymium (Nd), can be achieved through specific microstructural modifications with decreased Dy concentrations. The approach is to reduce the size of individual crystallographically-aligned grains in the magnet so that each grain can only support a single magnetic domain and to simultaneously dilute the Nd-Fe inter-granular phase present in conventional magnets with a non-Fe-containing, Nd-rich phase (Nd-Cu alloy) in an attempt to partially magnetically isolate the …

Simulation Of Scalability For Autonomous Mobile Microgrids, Nathan Beyers

Dissertations, Master's Theses and Master's Reports

Microgrids are small-scale, decentralized systems for generation, storage, and management of electricity to provide power within a local area. By establishing these microgrids using autonomous robots, they can be made safer and more easily reconfigurable. This thesis presents a plan and outlines the infrastructure needed for scaling up previous experimental work on such systems. This work brings together a variety of tools in the form of both software and hardware to set the stage for how further development can be completed. An architecture for physical testing has been built to validate the full potential of navigation and making electrical connections …

Design Of Real-Time Combustion Feedback System And Experimental Study Of An Rcci Engine For Control, Jayant Kumar Arora

Dissertations, Master's Theses and Master's Reports

Premixed compression ignition (PCI) technologies offer high efficiency and low emissions but are usually confined by limited operation range as well as high pressure rise and heat release rate. In this work, a more recently developed PCI mode is explored where in-cylinder blending of two fuels with different auto-ignition characteristics (diesel and gasoline) is utilized to create reactivity stratification such that heat release rate and combustion timing can be controlled. This mode has been defined as Reactivity Controlled Compression Ignition (RCCI).

As part of this thesis, the main aim is to study various parameters that can be used to control …

Design Features And Optimization Of Profile Extrusion Dies, Abhishek Sai Erri Pradeep

Dissertations, Master's Theses and Master's Reports

This report deals with design of dies used in the plastic extrusion industry. The design methodology for extrusion dies has evolved over the years with advancement of computing technology. However, the design process is still heavily dependent on the experience of the die designer, and hence is still considered to be more of an art than science. Even for an experienced designer, the time required to design the die and perform consecutive fine tuning iterations is high. In this report, a proprietary optimization code for extrusion dies, .developed by Plastic Flow LLC, was tested and shown to be advantageous over …

Pilot-Scale Study Of Low-Tech Methods Of Sustainable Class A Biosolids Production: A Trial Run, Rebecca L. Green

Dissertations, Master's Theses and Master's Reports

Water resource recovery facilities can improve sustainability by producing Class A biosolids. However, many conventional methods for achieving Class A biosolids are expensive, with high maintenance and energy costs. However, low-cost, low-tech (LCLT) treatment methods are also available. The overall goal of the larger project of which this study was a part is to develop a rational and universal approach for design of LCLT processes. To achieve this goal, pilot-scale studies of LCLT processes will be performed. The goal of this portion of the project was to perform a trial run pilot-scale study. During the trial run, the pilot-scale biosolids …

The Effect Of Solidification Rate And Solutionizing Quench Rate On The Mechanical Properties And Hardening Response Of Aluminum Alloys: A Quantitative Comparison, Rafael Gil-Figueroa

Dissertations, Master's Theses and Master's Reports

A comparative study of five aluminum alloys was performed to characterize the effect of solidification rate and quench rate on casting microstructure and properties. The alloys were cast in the geometry for Jominy End Quench (JEQ) testing, so as to take advantage of the JEQ test’s ability to give data on multiple quench rates in a single sample and illustrate the quench sensitivity of an alloy. While the Jominy End Quench test has been used in aluminum alloys, the effects of solidification rates have not been assessed in depth. The work done by other studies has either focused on a …

Integration And Testing Of An Advanced Conformable Cng Tank In A Full-Sized Light-Duty Pickup, Abayomi Famuyiwa

Dissertations, Master's Theses and Master's Reports

Michigan Technological University is collaborating with Southwestern Energy and REL Inc. to develop and integrate a compressed natural gas (CNG) matrix tank that enables efficient packaging, increases range, and reduced cost for CNG vehicle applications. The vehicle being used in this project is a light-duty pickup truck to take advantage of the open space underneath the body and bed of the vehicle. With today’s cylindrical CNG tanks consuming cargo space, a solution is to develop a tank capable of being shaping to the underbody of the truck to free cargo space. University faculty and graduate students utilizes Finite Element Analysis …

An Experimental Investigation Of Low Temperature Combustion Regimes In A Light Duty Engine, Kaushik Kannan

Dissertations, Master's Theses and Master's Reports

A continuous investigation on the improvement of internal combustion engines is necessary due to the stringent emission and fuel economy regulations. Low Temperature Combustion (LTC) is a promising field of research since it can simultaneously reduce NOx and soot while attaining high thermal efficiencies in automotive engines. A thorough study of several LTC regimes is necessary to understand the quantitative comparison and the extent of feasibility of these regimes functioning on an automotive engine. This thesis concentrates on an experimental investigation of three different LTC modes namely Homogeneously Charged Compression Ignition (HCCI), Partially Premixed Compression Ignition (PPCI) and Reactivity Controlled …

A Cultural And Technical Study Of Wastewater Treatment Plant Maintenance In A Small Community In Peru, Rebecca C. Midkiff

Dissertations, Master's Theses and Master's Reports

Management of wastewater treatment plants (WWTPs) has been found to be especially challenging in small, rural communities of the developing world. This study examined maintenance of two small WWTPs in Leymebamba and Palmira, Peru through interviews with local authorities, observation of maintenance practices, wastewater measurements, and prediction of effects from maintenance with modeling using a wastewater process simulation software, BioWin. Challenges and motivations related to maintenance were investigated with semi-structured interviews, and maintenance practices were recorded during observations. It was found that outside supervision was a key motivating factor, and the existence of an operator who is supported by the …

Experimental Investigations Of Fused Filament Fabrication For Applications To Affordable Scientific Hardware, Bas Wijnen

Dissertations, Master's Theses and Master's Reports

This research aims to make science more accessible through the use of open source 3-D printers.

A new control system for CNC machines in general and 3-D printers specifically, is developed and presented that enables web-based control of 3-D tools from any Internet connected device. The system can be set up and controlled entirely from a web interface.

A tool was designed to help apply science to the developing world. The developing world remains plagued by lack of access to safe drinking water. A methodology is provided for the design, development, and technical validation of a low-cost open-source water testing …

Integrated Computational And Experimental Evaluation Of Electromagnetic Energy-Induced Self-Healing Performance Of Asphalt Composites, Zigeng Wang

Dissertations, Master's Theses and Master's Reports

The objective of this doctoral research is to investigate the electromagnetic energy induced self-healing effect of modified asphalt mixture material by developing computational and experimental characterization tools. More than 90% of the pavements in United States are constructed by asphalt mixture. The durability of pavement decreased by distresses has significant impact on maintenance costs. The asphalt mixture has self-healing capability because the asphalt could flow and fill the microcracks if enough external energy can be transmitted to the asphalt mixture system. However, the self-healing capability of asphalt is limited based on the climatic condition and traffic volume. Therefore, it is …

Air Charge Estimation For An Si Engine Using In-Cylinder Pressure Sensor, Arya Yazdani

Dissertations, Master's Theses and Master's Reports

An accurate estimation of cycle by cycle in-cylinder mass and the composition of the combustion chamber charge is required for engine control strategies to meet stringent pollution emission and fuel consumption regulations. Estimation of fresh charge and residual gas masses is beneficial in terms of fuel efficiency, tailpipe emissions, engine performance, for engine control strategies. Air-flow meter, which is mounted in the intake air circuit, can be utilized in a closed-loop strategy to control air charge. However, air flow meter has a response delay; moreover dynamics of intake manifold and pipes must be taken into consideration to improve the estimation …

Nanosphere Lithography And Its Application In Rapid And Economic Fabrication Of Plasmonic Hydrogenated Amorphous Silicon Photovoltaic Devices, Chenlong Zhang

Dissertations, Master's Theses and Master's Reports

Solar photovoltaic (PV) devices harvest energy from solar radiation and convert it to electricity. PV technologies, as an alternative to traditional fossil fuels, use clean and renewable energy while minimizing pollution. For decades researchers have been developing thin film solar cells as an important alternatives to the relatively expensive bulk crystal solar cell technology. Among those, hydrogenated amorphous silicon (a-Si:H) solar cells prevails for good efficiency, non-toxic and materially abundant nature. However, a-Si:H thickness must be minimized to prevent light induced degradation, so optical enhancement is necessary. Light manipulation has to be applied and carefully engineered to trap light within …

Designing A Permeable Reactive Barrier For The Remediation Of Copper Contaminated Groundwater., Christopher Walkons

Dissertations, Master's Theses and Master's Reports

This project details the design of a sorption based pilot-scale permeable reactive barrier (PRB) for the removal of copper from groundwater. The reactive material for the barrier is the residual of coagulants used in drinking water treatment operations. Physical and chemical properties of these water treatment residuals (WTR) have been studied to optimize PRB design. Batch reactor tests have shown that equilibrium sorption of copper can be fit to a Langmuir type isotherm. Kinetic and column experiments have been conducted to understand the significance of chemical and physical mass transfer limitations. A leaching test indicated the concentrations of hazardous elements …

Enhancing Osseointegration Of Orthopaedic Implants With Titania Nanotube Surfaces, Erin A. Baker

Dissertations, Master's Theses and Master's Reports

Introduction: As joint arthroplasty surgical procedures increase annually, the development of new strategies, including novel materials and surface modifications, to attain solid bone-implant fixation are needed to increase implant terms of service. In this study, we evaluate two morphologies of titania nanotubes in both in vitro and in vivo experiments to quantify osseointegrative potential and material-level biocompatibility.

Materials and Methods: Samples were prepared via an electrochemical etching process. Two different titania nanotube (TiNT) morphologies were produced, Aligned and Trabecular. For the in vitro experiment, Sprague Dawley (SD) rat marrow-derived bone marrow cells (BMC) were seeded on samples. Alkaline phosphatase (ALP) …