Engineering Commons^™

Professional Development, Outreach, And Technology Awareness With The Mobile Lab, Jeremy Worm

TechTalks

The Mobile Lab is a one of a kind mobile event facility operated by the Advanced Power Systems Research Center (APS LABS). The Mobile Lab travels the country providing hands-on Professional Development short courses, STEM Outreach, and as a venue for increasing awareness of new technologies. The Mobile Lab consists of a classroom, two full-functional powertrain test cells, a fleet of over 25 vehicles, and a chassis dynamometer. The configurability of the Mobile Lab enables support of virtually any technical or non-technical short course or outreach. The Mobile Lab commands attention, generating large crowds at conferences, expos, and community events, …

Food-Energy-Water Nexus Approaches To Climate Change Mitigation And Adaptation, David Watkins

TechTalks

The Food-Energy-Water (FEW) Nexus is defined by the complex interactions and interdependencies of basic resource provisioning systems that tend to be managed and regulated independently of one another. Coupled with maintaining ecosystem services, enhancing food, energy, and water security for the planet’s growing population represents a grand research challenge. With a focus on ecosystem services affected by climate change, two interdisciplinary FEW Nexus projects are briefly presented -- one informing decision making at the household level and the other informing water resources planning and stakeholder consensus at the regional level. At the household level, environmental impact models help to identify …

Implantable Sensors For Regenerative Medicine, Keat Ghee Ong

TechTalks

In vivo, real-time measurement of local environmental parameters such as strain, pressure, temperature, pH, oxygen tension and specific biomarkers can be valuable for regenerative medicine research and therapies. Wireless implantable sensors are an attractive approach for certain regenerative medicine applications due to its relative simplicity and low cost. Presented here are such two implantable sensors. The first sensor is based on a miniature wireless sensor network that can digitize physical and chemical parameters and continuously stream measurements to a nearby receiver via a 2-way communication protocol. With the incorporation of a strain gauge, this sensor platform was applied to record …

Model-Driven Design Of Materials, Gregory M. Odegard

TechTalks

Thomas Edison once said “I have not failed. I've just found 10,000 ways that won't work.” The Edisonian approach to materials development has been the gold standard for most of human history. However, advances in computational speeds and modeling techniques over the last couple of decades have enabled new model-driven approaches to materials development, as manifested in the Integrated Computational Materials Engineering (ICME) and Materials Genome Initiative (MGI) efforts. By designing and simulating new materials in a computational environment, we can dramatically cut down on the cost and time associated with the Edisonian approach to material development. At Michigan Tech, …

Biodegradable Zinc Vascular Implant Materials, Jeremy Goldman

TechTalks

Bioabsorbable metal stents are being developed to mitigate the long-term side effects associated with corrosion-resistant stents. A decade-long research with iron (Fe)- and magnesium (Mg)-based stent materials has concluded with little success. Fe produces a voluminous, retained oxide product in the arterial wall, whereas Mg and its alloys corrode too rapidly. A breakthrough in the field of biodegradable metallic stents was made in 2013 in our research team (Drs. Goldman – Biomedical Engineering and Drelich – Materials Science and Engineering) with the introduction of zinc (Zn) and its alloys, which are free of the flaws observed for Fe- and Mg-based …

Me-Em Enewsbrief, March 2017, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

The Influence Of Bmss On The Characterization And Modeling Of Series And Parallel Li-Ion Packs, Sandra Castano-Solis, Daniel Serrano-Jimenez, Lucia Gauchia, Javier Sanz

Michigan Tech Publications, Part 1

This work analyzes the effects of a BMS (battery management system) on the characterization and modeling of series and parallel connections of Li-ion cell packs. The Li-ion pack studied consists of four series modules connected in parallel. This pack has been characterized by means of charge, discharge and frequency tests. As a result of these tests, series and parallel influence on battery parameters have been determined. A model considering the effects of a BMS is established and compared with a model based on a single-cell approach. Experimental validations show that the single cell based approach gives poor results in comparison …

Autonomy At The End Of The Earth, Jeremy P. Bos

TechTalks

Despite press accounts to the contrary, significant challenges remain in the development of true autonomous vehicles. Though these challenges are many and varied my research focuses on two areas. First, operation of autonomous vehicles in inclement weather with emphasis on ice and snow. The other focus is on developing functionally safe mobility solutions. In this talk, I will briefly describe some approaches I am developing to solving these challenges.

Multi-Sensor Fusion On Mobile Platforms, Timothy C. Havens

TechTalks

An important goal for many mobile platforms---terrestrial, aquatic, or airborne---is reliable, accurate, and on-time sensing of the world around them. The PRIME Lab has been investigating multi-sensor fusion for many applications, including explosive hazard detection and infrastructure inspection, from terrestrial vehicles and unmanned aerial vehicles (UAVs). New developments in multi-sensor fusion using radars, imaging sensors, and LIDAR will be discussed that encompass advancements from novel signal processing approaches for mobile ground-penetrating radar to more theoretical approaches for optimal fusion of measurements from multi-modal sensors. This talk will explore the area of sensor-fusion both from a practical, application-focused standpoint and also …

Persistent Operation Of Mobile Robots, Nina Mahmoudian

TechTalks

Success of numerous unmanned mobile missions in space, air, ground, and water is measured by the ability of the robots to usefully operate for extended time in dynamic and uncertain environments. This talk will provide an overview of the recent progress towards performing autonomous long-term missions. The approach includes task and energy routing scheduling, efficient path planning and coordination, and low-infrastructure platforms. The goal is to provide practical solutions by lowering deployment and operating costs, while also increasing efficiency, endurance and persistence during complex missions like disaster responses and long-term science discoveries.

Mobility And Safety: Do Drivers Behave As Engineers Want Them To Behave?, Pasi T. Lautala

TechTalks

As engineers, we thrive to provide environment for safe mobility through proper geometric designs, regulations, guidance and warnings. However, safe movements are still heavily dependent on the individual behavior and reactions by the drivers/users (at least for now). Traditionally, understanding drivers’ behavior has been a difficult topic to research, but today we have increasing number of data and tools available to improve that understanding. One of the tools that has recently become available is the Naturalistic Driving Study (NDS) database that provides an opportunity to investigate the behavior of almost 3,500 instrumented vehicles and drivers in six different regions of …

Doe Apra-E Nextcar Program On Connected And Automated Vehicles In Collaboration With Gm, Jeffrey D. Naber

TechTalks

Within the $3.5M ARPA-e NEXTCAR program, Michigan Tech in collaboration with GM will development and demonstrate on a fleet of eight 2017 Chevrolet Volts and a mobile connected cloud computing center, a Vehicle Dynamics and Powertrain (VD&PT) model-based predictive controller (MPC) encompassing a real-time VD&PT dynamic model leveraging vehicle conductivity (V2X) with real-time traffic modeling and predictive speed horizons and eco-routing. The objective is to achieve a minimum of 20% reduction in energy consumption (electric + fuel) through the first ever real-time implementation and connection of route planning, powertrain energy management MPC algorithms. Connectivity data from vehicles, infrastructure, GPS, traffic …

Batteries In-N-Out: Multiple Lives Mobility, Lucia Gauchia

TechTalks

As batteries become more extended across all applications, battery second life or re-purposing is gaining traction. This adds another degree of mobility to batteries. Not only do they move with the person/mobile/vehicle during operation, but also after their life in that application ends. Then they can be re-purposed for other less demanding applications, such as residential or buildings. As batteries move in and out of applications as their performance degrades, they show an interesting mobility and life cycle analysis which presents better environmental solutions, lower costs and new opportunities.

Lowest Matric Potential In Quartz: Metadynamics Evidence, Chao Zhang, Yi Dong, Zhen Liu

Department of Civil, Environmental, and Geospatial Engineering Publications

The lowest matric potential is an important soil property characterizing the strength of retaining water molecules and a key parameter in defining a complete soil water retention curve. However, the exact value of the lowest matric potential is still unclear and cannot be measured due to the limitation of current experimental technology. In this study, a general theoretical framework based on metadynamics was proposed to determine the lowest matric potential in quartz minerals. The matric potential was derived from partial volume free energy and can be further calculated by the difference between the adsorption free energy and self‐hydration free energy. …

Emergence Of Home Manufacturing In The Developed World: Return On Investment For Open-Source 3-D Printers., Emily E. Petersen, Joshua M. Pearce

Department of Materials Science and Engineering Publications

Through reduced 3-D printer cost, increased usability, and greater material selection, additive manufacturing has transitioned from business manufacturing to the average prosumer. This study serves as a representative model for the potential future of 3-D printing in the average American household by employing a printer operator who was relatively unfamiliar with 3-D printing and the 3-D design files of common items normally purchased by the average consumer. Twenty-six items were printed in thermoplastic and a cost analysis was performed through comparison to comparable, commercially available products at a low and high price range. When compared to the low-cost items, investment …

Adhesion Evaluation Of Asphalt-Aggregate Interface Using Surface Free Energy Method, Jie Ji, Hui Yao, Luhou Liu, Zhi Suo, Peng Zhai, Xu Yang, Zhanping You

Michigan Tech Publications, Part 1

The influence of organic additives (Sasobit and RH) and water on the adhesion of the asphalt-aggregate interface was studied according to the surface free energy theory. Two asphalt binders (SK-70 and SK-90), and two aggregate types (limestone and basalt) were used in this study. The sessile drop method was employed to test surface free energy components of asphalt, organic additives and aggregates. The adhesion models of the asphalt-aggregate interface in dry and wet conditions were established, and the adhesion work was calculated subsequently. The energy ratios were built to evaluate the effect of organic additives and water on the adhesiveness …

New-Generation Nasa Aura Ozone Monitoring Instrument (Omi) Volcanic So2 Dataset: Algorithm Description, Initial Results, And Continuation With The Suomi-Npp Ozone Mapping And Profiler Suite (Omps), Can Li, Nickolay A. Krotkov, Simon Carn, Yan Zhang, Robert J.D. Spurr, Joanna Joiner

Michigan Tech Publications, Part 1

Since the fall of 2004, the Ozone Monitoring Instrument (OMI) has been providing global monitoring of volcanic SO2 emissions, helping to understand their climate impacts and to mitigate aviation hazards. Here we introduce a new-generation OMI volcanic SO2 dataset based on a principal component analysis (PCA) retrieval technique. To reduce retrieval noise and artifacts as seen in the current operational linear fit (LF) algorithm, the new algorithm, OMSO2VOLCANO, uses characteristic features extracted directly from OMI radiances in the spectral fitting, thereby helping to minimize interferences from various geophysical processes (e.g., O3 absorption) and measurement details (e.g., wavelength shift). To solve …

Arctic Micromonas Uses Protein Pools And Non-Photochemical Quenching To Cope With Temperature Restrictions On Photosystem Ii Protein Turnover, Guangyan Ni, Gabrielle Zimbalatti, Cole D. Murphy, Audrey B. Barnett, Christopher M. Arsenault, Gang Li, Amanda M. Cockshutt, Douglas A. Campbell

Michigan Tech Publications, Part 1

Micromonas strains of small prasinophyte green algae are found throughout the world’s oceans, exploiting widely different niches. We grew arctic and temperate strains of Micromonas and compared their susceptibilities to photoinactivation of Photosystem II, their counteracting Photosystem II repair capacities, their Photosystem II content, and their induction and relaxation of non-photochemical quenching. In the arctic strain Micromonas NCMA 2099, the cellular content of active Photosystem II represents only about 50 % of total Photosystem II protein, as a slow rate constant for clearance of PsbA protein limits instantaneous repair. In contrast, the temperate strain NCMA 1646 shows a faster clearance …

Wire Neutralization System, Scott A. Bradley, Jason Wiitanen, Timothy B. Smigowski, John T. Niemeyer, Andrew Culkin

Michigan Tech Patents

A wire neutralizing system for use with a vehicle including a frame adapted to be hitched to a vehicle. At least one wheel supports the frame while a bottom of the wheel rolls over terrain having buried wires. The system also includes a blade movable between a stowed position in which the blade is above the bottom of the wheel and a deployed position in which the blade is below the bottom of the wheel, such that the blade plows through the terrain to disable buried wires when in the deployed position.

A New Gaskinetic Model To Analyze Background Flow Effects On Weak Gaseous Jet Flows From Electric Propulsion Devices, Chunpei Cai

Michigan Tech Publications, Part 1

Recent work on studying rarefied background and jet flow interactions is reported. A new gaskinetic method is developed to investigate two closely related problems. The first problem is how a collisionless background flow can affect a highly rarefied jet flow. The rarefied jet and background flow conditions are assumed available and described with seven parameters. Gaskinetic theories are applied and formulas are obtained for the mixture properties. Simulations are performed to validate these expressions, and excellent agreement is obtained. The second problem is to recover the collisionless background and jet flow parameters with limited measurements. A group of linearized equations …

Open-Source Automated Mapping Four-Point Probe, Handy Chandra, Spencer W. Allen, Shane W. Oberloier, Nupur Bihari, Jephias Gwamuri, Joshua M. Pearce

Department of Materials Science and Engineering Publications

Scientists have begun using self-replicating rapid prototyper (RepRap) 3-D printers to manufacture open source digital designs of scientific equipment. This approach is refined here to develop a novel instrument capable of performing automated large-area four-point probe measurements. The designs for conversion of a RepRap 3-D printer to a 2-D open source four-point probe (OS4PP) measurement device are detailed for the mechanical and electrical systems. Free and open source software and firmware are developed to operate the tool. The OS4PP was validated against a wide range of discrete resistors and indium tin oxide (ITO) samples of different thicknesses both pre- and …

Property Analysis Of Exfoliated Graphite Nanoplatelets Modified Asphalt Model Using Molecular Dynamics (Md) Method, Hui Yao, Qingli Dai, Zhanping You, Andreas Bick, Min Wang, Shuaicheng Guo

Michigan Tech Publications, Part 1

This Molecular Dynamics (MD) simulation paper presents a physical property comparison study between exfoliated graphite nanoplatelets (xGNP) modified and control asphalt models, including density, glass transition temperature, viscosity and thermal conductivity. The three-component control asphalt model consists of asphaltenes, aromatics, and saturates based on previous references. The xGNP asphalt model was built by incorporating an xGNP and control asphalt model and controlling mass ratios to represent the laboratory prepared samples. The Amber Cornell Extension Force Field (ACEFF) was used with assigned molecular electro-static potential (ESP) charge from NWChem analysis. After optimization and ensemble relaxation, the properties of the control and …

2017 Civil And Environmental Engineering Department News, Department Of Civil And Environmental Engineering, Michigan Technological University

Department of Civil, Environmental, and Geospatial Engineering Newsletters

Table of Contents

• Student Awards
• Faculty News
• STEM Outreach
• Department News
• CEE Donor Recognition
• Alumni News

Engineering Research 2017, College Of Engineering, Michigan Technological University

Michigan Tech Engineering Magazine

Table of Contents

• Health
• Engineered Materials
• Sensing & Controls
• Air & Water
• People

Me-Em 2016-17 Annual Report, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering Annual Reports

Table of Contents

• Undergrad Features
• Graduate Features
• Enrollment & Degrees
• Graduates
• Faculty & Staff
• Department News
• Alumni
• Donors
• Contracts & Grants
• Patents & Publications

Lakebed Characterization Using Side-Scan Data For Investigating The Latest Lake Superior Coastal Environment Conditions, Hasan Salih Kulunk

Dissertations, Master's Theses and Master's Reports

This thesis provides a review of the development of hydrographic survey equipment and supporting geospatial equipment and technology such as GPS. Using SonarWiz, a sonar image processing software package, lakebed classification methodologies were evaluated for mapping Buffalo Reef in Lake Superior located near Gay, Michigan. The goal was to develop an approach to mapping the reef bed and delineating various components of the lake bottom, including stamp sands, which are migrating from the abandoned Gay copper processing stamp mill to the reef. This contamination of the reef is having an adverse effect on habitats important to local flora and fauna. …

Surface Ozone And Its Precursors At Summit, Greenland: Comparison Between Observations And Model Simulations, Yaoxian Huang, Shiliang Wu, Louisa J. Kramer, Detlev Helmig, Richard E. Honrath

Michigan Tech Publications, Part 1

Recent studies have shown significant challenges for atmospheric models to simulate tropospheric ozone (O3/and its precursors in the Arctic. In this study, ground-based data were combined with a global 3-D chemical transport model (GEOS-Chem) to examine the abundance and seasonal variations of O3 and its precursors at Summit, Greenland (72.34° N, 38.29° W; 3212 ma.s.l.). Model simulations for atmospheric nitrogen oxides (NOx/, peroxyacetyl nitrate (PAN), ethane (C2H6/, propane (C3H8/, carbon monoxide (CO), and O3 for the period July 2008-June 2010 were compared with observations. The model performed well in simulating certain species (such as CO and C3H8/, but some significant …

Limited Bandwidth Wireless Communication Strategies For Structural Control Of Seismically Excited Shear Structures, Benjamin Winter

Dissertations, Master's Theses and Master's Reports

Structural control is used to mitigate unwanted vibrations in structures when large excitations occur, such as high winds and earthquakes. To increase reliability and controllability in structural control applications, engineers are making use of semi-active control devices. Semi-active control gives engineers greater control authority over structural response versus passive controllers, but are less expensive and more reliable than active devices. However, the large numbers of actuators required for semi-active structural control networks introduce more cabling within control systems leading to increased cost.

Researchers are exploring the use of wireless technology for structural control to cut down on the installation cost …

Performance Comparison Of Binarized Neural Network With Convolutional Neural Network, Lopamudra Baruah

Dissertations, Master's Theses and Master's Reports

Deep learning is a trending topic widely studied by researchers due to increase in the abundance of data and getting meaningful results with them. Convolutional Neural Networks (CNN) is one of the most popular architectures used in deep learning. Binarized Neural Network (BNN) is also a neural network which consists of binary weights and activations. Neural Networks has large number of parameters and overfitting is a common problem to these networks. To overcome the overfitting problem, dropout is a solution. Randomly dropping some neurons along with its connections helps to prevent co-adaptations which finally help in reducing overfitting. Many researchers …

Impact Of Pretreatment Methods On Fast Pyrolysis Of Biomass, Yash Donepudi

Dissertations, Master's Theses and Master's Reports

Biomass is considered a renewable source of energy with minimum carbon foot print if managed sustainably. The majority of the worlds energy is spend on transportation, and fast pyrolysis of biomass could be a potential route for production of a sustainable liquid transportation fuel. However, there are several hurdles in the conversion process. This work addresses these hurdles by investigating the impact of several pretreatment methods on fast pyrolysis including thermal pretreatment (torrefaction), comminution/grinding, mineral reduction. The impact of important parameters like heat transfer medium, conversion temperature and particle size were also investigated.

A mild thermal pretreatment of biomass (~10-15% …