Engineering Commons^™

Correction: Responses Of Deposition And Bioaccumulation In The Great Lakes Region To Policy And Other Large-Scale Drivers Of Mercury Emissions, Judith Perlinger, N. R. Urban, A. Giang, N. E. Selin, A. Hendricks, H. Zhang, Aditya Kumar, S. Wu, Valoree Gagnon, Hugh Gorman, E. S. Norman

Michigan Tech Publications, Part 1

Correction for ‘Responses of deposition and bioaccumulation in the Great Lakes region to policy and other large-scale drivers of mercury emissions’ by J. A. Perlinger et al., Environ. Sci.: Processes Impacts, 2018, 20, 195–209.

In the original article, there were errors in some numerical values in Table 3 and in the text in Sections 3.1 and 4.1. The corrected Table and Sections are shown below. The changes are to the magnitudes of mercury species deposition to the Great Lakes region, the Upper Peninsula of Michigan, and the Adirondack region of the Lakes basin. The changes to the Adirondack …

Mapping Modeled Exposure Of Wildland Fire Smoke For Human Health Studies In California, Patricia Koman, Michael Billmire, Kirk Baker, Ricardo De Majo, Frank Anderson, Sumi Hoshiko, Brian Thelen, Nancy H. F. French

Michigan Tech Publications, Part 1

Wildland fire smoke exposure affects a broad proportion of the U.S. population and is increasing due to climate change, settlement patterns and fire seclusion. Significant public health questions surrounding its effects remain, including the impact on cardiovascular disease and maternal health. Using atmospheric chemical transport modeling, we examined general air quality with and without wildland fire smoke PM_2.5. The 24-h average concentration of PM_2.5 from all sources in 12-km gridded output from all sources in California (2007–2013) was 4.91 μg/m³. The average concentration of fire-PM_2.5 in California by year was 1.22 μg/m³ (~25% …

Me-Em Enewsbrief, June 2019, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Mechanical Properties And Applications Of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing, Matthew J. Reich, Aubrey Woern, Nagendra Gautam Tanikella, Joshua M. Pearce

Michigan Tech Publications, Part 1

Past work has shown that particle material extrusion (fused particle fabrication (FPF)/fused granular fabrication (FGF)) has the potential for increasing the use of recycled polymers in 3D printing. This study extends this potential to high-performance (high-mechanical-strength and heat-resistant) polymers using polycarbonate (PC). Recycled PC regrind of approximately 25 mm² was 3D printed with an open-source Gigabot X and analyzed. A temperature and nozzle velocity matrix was used to find useful printing parameters, and a print test was used to maximize the output for a two-temperature stage extruder for PC. ASTM type 4 tensile test geometries as well as ASTM-approved …

Agent-Based Microgrid Architecture For Generation Following Protocols, Steven Goldsmith

Michigan Tech Patents

A system for predicting power and loads over a single, relatively short time horizon. More specifically, a system comprising a Storage Agent (S-agent) Cohort within a grid control society, wherein the system expands G and L intra-cohort protocols to allow the S-cohort to participate in power management of the grid by scheduling storage components in source or load roles as determined by the time-varying state of the power imbalance and by the risk-adjusting capacity margin relationship between the G and L cohorts.

Management Transition To The Great Lakes Nearshore: Insights From Hydrodynamic Modeling, Chenfu Huang, Anika Kuczynski, Martin T. Auer, David M. O'Donnell, Pengfei Xue

Department of Civil, Environmental, and Geospatial Engineering Publications

The emerging shift in Great Lakes management from offshore to nearshore waters will require attention to complexities of coastal hydrodynamics and biogeochemical transformations. Emphasizing hydrodynamics, this work resolves transport processes in quantifying discharge plume and pollutant of concern (POC) footprint dimensions, the latter being the portion of the plume where water quality standards are not met. A generic approach, isolated from pollutant-specific biokinetics, provides first-approximation estimates of the footprint area. A high-resolution, linked hydrodynamic-tracer model is applied at a site in the Greater Toronto Area on Lake Ontario. Model results agree with observed meteorological and hydrodynamic conditions and satisfactorily simulate …

Capability Of Matterport 3d Camera For Industrial Archaeology Sites Inventory, R. Shults, E. Levin, R. Habibi, S. Shenoy, O. Honcheruk, T. Hart, Z. An

Michigan Tech Publications, Part 1

This paper provides an overview of state-of-The-Art technology and sensor for the inventory of industrial archaeology. As an object of study, a historical copper shaft the Quincy Mine in Michigan State Upper Peninsula was chosen. This shaft was operated for nearly 100 years from 1846 to 1945 and today, what remains of the shaft is a part of the Keweenaw National Historical Park. The main sensor for data acquisition that was used is a 3D camera Matterport. In given research, the results of the above ground scanning using of Matterport are presented. Before scanning a calibration of Matterport camera was …

Systems Analysis For Pet And Olefin Polymers In A Circular Economy, David R. Shonnard, Emily Tipaldo, Vicki Thompson, Joshua M. Pearce, Gerard T. Caneba, Robert Handler

Michigan Tech Publications, Part 1

Polyethylene terephthalate (PET #1) and polyolefin plastics such polyethylene (HDPE #2, LDPE #4) and polypropylene (PP #5) are major products from the chemical industry, and they comprise a significant fraction of municipal solid waste that ends up in landfills or as litter and marine debris. The reuse of these polymeric materials can be optimized through systems analysis with a view on materials flow analysis, techno-economics, environmental life cycle assessment, and consequential societal impacts. This contribution will present the overall research approach for this exploratory project within the DOE- and industry-funded REMADE Institute and end with a proposed systems analysis framework.

Open Source Completely 3-D Printable Centrifuge, Salil S. Sule, Aliaksei Petsiuk, Joshua M. Pearce

Michigan Tech Publications, Part 1

Centrifuges are commonly required devices in medical diagnostics facilities as well as scientific laboratories. Although there are commercial and open source centrifuges, the costs of the former and the required electricity to operate the latter limit accessibility in resource-constrained settings. There is a need for low-cost, human-powered, verified, and reliable lab-scale centrifuges. This study provides the designs for a low-cost 100% 3-D printed centrifuge, which can be fabricated on any low-cost RepRap-class (self-replicating rapid prototyper) fused filament fabrication (FFF)- or fused particle fabrication (FPF)-based 3-D printer. In addition, validation procedures are provided using a web camera and free and open …

Capillary Penetration Method For Measuring Wetting Properties Of Carbon Ionomer Films For Proton Exchange Membrane Fuel Cell (Pemfc) Applications, Sofyane Abbou, Kazuya Tajiri, K. T. Alofari, Ezequiel F. Medici, A. T. Haug, Jeffrey S. Allen

Michigan Tech Publications, Part 1

In this work, capillary rise experiments were performed to assess the wetting properties of carbon-ionomer (CI) films. The samples were attached to a micro-balance and then immersed into liquid water to (i) measure the mass gain from the liquid uptake and (ii) estimate the (external) contact angle to water (typical value around 140°). The results showed that drying the CI films under low vacuum significantly impacted the CI film wettability. The influence of the ionomer content on the CI films’ wettability was investigated with various ionomer to carbon (I/C) ratios: 0.8, 1.0, 1.2 and 1.4. No significant variation of the …

Emittance Spectroscopy And Broadband Thermal Remote Sensing Applied To Phosphorite And Its Utility In Geoexploration: A Study In The Parts Of Rajasthan, India, Arindam Guha, Yasushi Yamaguchi, Snehamoy Chatterjee, Komai Rani, Kumranchat Vinod Kumar

Michigan Tech Publications, Part 1

The contrast in the emissivity spectra of phosphorite and associated carbonate rock can be used as a guide to delineate phosphorite within dolomite. The thermal emissivity spectrum of phosphorite is characterized by a strong doublet emissivity feature with their absorption minima at 9 µm and 9.5 µm; whereas, host rock dolomite has relatively subdued emissivity minima at ~9 µm. Using the contrast in the emissivity spectra of phosphorite and dolomite, data obtained by the thermal bands of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor were processed to delineate phosphorite within dolomite. A decorrelation stretched ASTER radiance composite could …

Preliminary Automated Determination Of Edibility Of Alternative Foods: Non-Targeted Screening For Toxins In Red Maple Leaf Concentrate, Joshua M. Pearce, Maryam Khaksari, David C. Denkenberger

Michigan Tech Publications, Part 1

Alternative food supplies could maintain humanity despite sun-blocking global catastrophic risks (GCRs) that eliminate conventional agriculture. A promising alternative food is making leaf concentrate. However, the edibility of tree leaves is largely uncertain. To overcome this challenge, this study provides the methods for obtaining rapid toxics screening of common leaf concentrates. The investigation begins with a non-targeted approach using an ultra-high-resolution hybrid ion trap orbitrap mass spectrometer with electrospray ionization (ESI) coupled to an ultra-high pressure two-dimensional liquid chromatograph system on the most common North American leaf: the red maple. Identified chemicals from this non-targeted approach are then cross-referenced with …

Evidence Of Instability In Previously-Mapped Landslides As Measured Using Gps, Optical, And Sar Data Between 2007 And 2017: A Case Study In The Portuguese Bend Landslide Complex, California, El Hachemi Y. Bouali, Thomas Oommen, Rüdiger Escobar-Wolf

Michigan Tech Publications, Part 1

Velocity dictates the destructive potential of a landslide. A combination of synthetic aperture radar (SAR), optical, and GPS data were used to maximize spatial and temporal coverage to monitor continuously-moving portions of the Portuguese Bend landslide complex on the Palos Verdes Peninsula in Southern California. Forty SAR images from the COSMO-SkyMed satellite, acquired between 19 July 2012 and 27 September 2014, were processed using Persistent Scatterer Interferometry (PSI). Eight optical images from the WorldView-2 satellite, acquired between 20 February 2011 and 16 February 2016, were processed using the Co-registration of Optically Sensed Images and Correlation (COSI-Corr) technique. Displacement measurements were …

Bathymetric Surveying In Lake Superior: 3d Modeling And Sonar Equipment Comparing, Eugene Levin, Guy Meadows, Roman Shults, Utku Karacelebi, Hasan Salih Kulunk

School of Technology Publications

This paper represents the overview of hydrographic surveying and different types of modern and traditional surveying equipment, and data acquisition using the traditional single beam sonar system and a modern fully autonomous underwater vehicle (AUV) IVER3. During the study, the data sets were collected using the vehicles of the Great Lake Research Center at Michigan Technological University. This paper presents how to process and edit the bathymetric data on SonarWiz5. Lastly, it compares the accuracy of the two different sonar systems in the different missions and creates 3D models to display and understand the elevations changes. Moreover, the 3D models …

Comparative Study Of Ethanol Foamed Asphalt Binders And Mixtures Prepared Via Manual Injection And Laboratory Foaming Device, Mohd Rosli Mohd Hasan, Zhanping You

Michigan Tech Publications, Part 1

The consistency of the ethanol foamed binders and mixtures prepared using asphalt binders foamed by the manual injection technique and laboratory foaming device were evaluated and compared in this study. The asphalt binders foamed using both methods was prepared at 120 °C, 130 °C and 140 °C. The performance of ethanol-foamed binders was evaluated in terms of rotational viscosity, expansion ratio, and low temperature cracking. Meanwhile, the performance of foamed WMA mixtures was tested using semi-circular bending (SCB), disk-shaped compact tension (DCT), and tensile strength ratio (TSR) tests. In order to conduct the TSR test, the samples were conditioned using …

Moisture Susceptibility Of Warm Mix Asphalt (Wma) With An Organic Wax Additive Based On X-Ray Computed Tomography (Ct) Technology, Jie Ji, Zhikai Yuan, Zhi Suo, Ying Xu, Pengfei Li, Zhanping You

Department of Civil, Environmental, and Geospatial Engineering Publications

The warm mix asphalt was fabricated with different moisture contents (0%, 1%, 2%, and 3%) of limestone aggregates using the Superpave gyratory compactor. The moisture susceptibility of asphalt mixtures with an organic wax additive RH was studied. The samples were compacted and tested using the modified Lottman test AASHTO T283, and the X-ray computed tomography technology was used to capture the internal structure images before and after the freeze-thaw cycles. The test results show that the air voids were distributed in the size range of 0–5 mm³ and 5–10 mm³. The number of air voids decreased with …

A Discrete Curvature Estimation Based Low-Distortion Adaptive Savitzky-Golay Filter For Ecg Denoising, Hui Huang, Shiyan Hu, Ye Sun

Department of Mechanical and Aerospace Engineering Publications

Electrocardiogram (ECG) sensing is an important application for the diagnosis of cardiovascular diseases. Recently, driven by the emerging technology of wearable electronics, massive wearable ECG sensors are developed, which however brings additional sources of noise contamination on ECG signals from these wearable ECG sensors. In this paper, we propose a new low-distortion adaptive Savitzky-Golay (LDASG) filtering method for ECG denoising based on discrete curvature estimation, which demonstrates better performance than the state of the art of ECG denoising. The standard Savitzky-Golay (SG) filter has a remarkable performance of data smoothing. However, it lacks adaptability to signal variations and thus often …

Lowering Emissivity Of Concrete Roof Tile's Underside Cuts Down Heat Entry To The Building, Xuejun Chen, Lei Wang, Zhikui Liu, Yinghong Qin, Ting Bao

Department of Civil, Environmental, and Geospatial Engineering Publications

Buildings in Southern China widely use a double-skin roof to reduce heat entry through the roof to the building interior during summertime. Concrete roof tiles are preferably installed as the outmost layer of the double-skin roof due to their resistance to hail and wind damages and their attractive price. However, after construction, the tile’s top tends to be darkened by dust deposit and algae growth, increasing the heat entry through the roof to the building. Here, we show that this heat entry can be curtailed by lowering the emissivity at the tile’s underside. Temperatures and heat fluxes at different elevations …

Analysis Of Drying And Saturating Natural Gypsum Samples For Mechanical Testing, Mohammadhossein Sadeghiamirshahidi, Stanley Vitton

Michigan Tech Publications, Part 1

The stability of underground abandoned gypsum mines is dependent on the gypsum pillar's strength, and most abandoned mines are in a fully saturated condition. Moisture affects the strength of gypsum and is therefore commonly measured when testing rock strength. For most rocks, this is a simple task of weighing the rock's mass before and after oven-heating at a specified temperature and duration. For natural gypsum, however, this is not a straightforward process. Heating natural gypsum can result in dehydration and transformation of gypsum to hemihydrate and anhydrite, thus changing the physical characteristics of the gypsum such as its particle density …

Could 79 People Solarize The U.S. Electric Grid?, Joshua M. Pearce, Emily Prehoda

Department of Materials Science and Engineering Publications

Although wealth inequality has many established negatives, this study investigates a potential positive, unprecedented wealth concentration makes it possible for solutions to large and seemingly intractable problems to be deployed by convincing a relatively small number of individuals to invest. In order to probe this potential outcome of inequality, this study quantifies the number of people necessary to radically reduce the greenhouse gas emissions responsible for global climate destabilization from the U.S. electric grid, which is one of the largest sources of emissions. Specifically, this study determined that 1544 GW of solar photovoltaic (PV) technology must be deployed to eliminate …

Mechanical Properties Of Michigan Basin's Gypsum Before And After Saturation, Mohammadhossein Sadeghiamirshahidi, Stanley Vitton

Michigan Tech Publications, Part 1

The stability analysis of an abandoned underground gypsum mine requires the determination of the mine pillar's strength. This is especially important for flooded abandoned mines where the gypsum pillars become saturated and are subjected to dissolution after flooding. Further, mine pillars are subjected to blast vibrations that generate some level of macro- and micro-fracturing. Testing samples of gypsum must, therefore, simulate these conditions as close as possible. In this research, the strength of gypsum is investigated in an as-received saturated condition using uniaxial compressive strength (UCS), Brazilian tensile strength (BTS) and point load index (PLI) tests. The scale effect was …

A Novel Correlation Model For Horizontal Axis Wind Turbines Operating At High-Interference Flow Regimes, Anurag Rajan, Fernando L. Ponta

Department of Mechanical and Aerospace Engineering Publications

Driven by economics-of-scale factors, wind-turbine rotor sizes have increased formidably in recent years. Larger rotors with lighter blades of increased flexibility will experiment substantially higher levels of deformation. Future turbines will also incorporate advanced control strategies to widen the range of wind velocities over which energy is captured. These factors will extend turbine operational regimes, including flow states with high interference factors. In this paper we derive a new empirical relation to both improve and extend the range of Blade Element Momentum (BEM) models, when applied to high interference-factor regimes. In most BEM models, these flow regimes are modeled using …

Evaluation Of Waste Express Bag As A Novel Bitumen Modifier, Yuming Lin, Chichun Hu, Sanjeev Adhikari, Chuanhai Wu, Miao Yu

Michigan Tech Publications, Part 1

With the rapid development of China’s e-commerce and logistics industry, a large number of waste express bags (WEBs) have been produced, which are difficult to recycle. The existing methods of waste express bag disposal often cause severe environmental pollution. It was discovered in this paper that the use of WEBs to modify bitumen could be an environmentally friendly way to recycle WEBs. This study aimed to investigate the feasibility of using WEBs to modify bitumen and promote the performance of WEB-modified bitumen. In order to verify this assumption, a series of basic or rheological experiments were conducted on different dosages …

Self-Assembly Of 3d Nanostructures In Electrospun Polycaprolactone-Polyaniline Fibers And Their Application As Scaffolds For Tissue Engineering, Samerender Nagam Hanumantharao, Carolynn Que, Smitha Rao

Department of Biomedical Engineering Publications

The fabrication of synthetic scaffolds that mimic the microenvironment of cells is a crucial challenge in materials science. The honeycomb morphology is one such bio-mimicking structure that possesses unique physical properties and high packing efficiency in a 3-dimensional space. Here, we present a novel method for electrospinning polycaprolactone-polyaniline with continuous, self-assembled, uniform, interwoven nanofibers forming patterns without the use of templates or porogens. By using the approach presented here, unique architectures mimicking the natural mechanical anisotropy of extracellular matrix were created by varying the electric field. Adult human dermal fibroblasts (HDFa) cells were successfully cultured on the nanofiber scaffolds without …

Unified Strength Model Of Asphalt Mixture Under Various Loading Modes, Chengdong Xia, Songtao Lv, Lingyun You, Dong Chen, Yipeng Li, Jianlong Zheng

Department of Civil, Environmental, and Geospatial Engineering Publications

Although the rutting resistance, fatigue cracking, and the resistance to water and frost are important for the asphalt pavement, the strength of asphalt mixture is also an important factor for the asphalt mixture design. The strength of asphalt mixture is directly associated with the overall performance of asphalt mixture. As a top layer material of asphalt pavement, the strength of asphalt mixture plays an indispensable role in the top structural bearing layer. In the present design system, the strength of asphalt pavement is usually achieved via the laboratory tests. The stress states are usually different for the different laboratory approaches. …

Evaluation Of Photogrammetry And Inclusion Of Control Points: Significance For Infrastructure Monitoring, Renee Oats, Rudiger Escobar-Wolf, Thomas Oommen

Department of Civil, Environmental, and Geospatial Engineering Publications

Structure from Motion (SfM)/Photogrammetry is a powerful mapping tool in extracting three-dimensional (3D) models from photographs. This method has been applied to a range of applications, including monitoring of infrastructure systems. This technique could potentially become a substitute, or at least a complement, for costlier approaches such as laser scanning for infrastructure monitoring. This study expands on previous investigations, which utilize photogrammetry point cloud data to measure failure mode behavior of a retaining wall model, emphasizing further robust spatial testing. In this study, a comparison of two commonly used photogrammetry software packages was implemented to assess the computing performance of …

Me-Em Enewsbrief, March 2019, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Impact Of Water Mixing And Ice Formation On The Warming Of Lake Superior: A Model-Guided Mechanism Study, Xinyu Ye, Eric J. Anderson, Philip Y. Chu, Chenfu Huang, Pengfei Xue

Michigan Tech Publications, Part 1

The Laurentian Great Lakes are one of the most prominent hotspots for the study of climate change induced lake warming. Warming trends in large, deep lakes, which are often inferred by the observations of lake surface temperature (LST) in most studies, are strongly linked to the total lake heat content. In this study, we use a 3D hydrodynamic model to examine the nonlinear processes of water mixing and ice formation that cause changes in lake heat content and further variation of LST. With a focus on mechanism study, a series of process-oriented experiments is carried out to understand the interactions …

Polydopamine And Collagen Coated Micro-Grated Polydimethylsiloxane For Human Mesenchymal Stem Cell Culture, Dhavan Sharma, Wenkai Jia, Fei Long, Shweta Pati, Qing-Hui Chen, Yibing Qyang, Bruce P. Lee, Chang Kyoung Choi, Feng Zhao

Department of Biomedical Engineering Publications

Natural tissues contain highly organized cellular architecture. One of the major challenges in tissue engineering is to develop engineered tissue constructs that promote cellular growth in physiological directionality. To address this issue, micro-patterned polydimethylsiloxane (PDMS) substrates have been widely used in cell sheet engineering due to their low microfabrication cost, higher stability, excellent biocompatibility, and most importantly, ability to guide cellular growth and patterning. However, the current methods for PDMS surface modification either require a complicated procedure or generate a non-uniform surface coating, leading to the production of poor-quality cell layers. A simple and efficient surface coating method is critically …

A Hamiltonian Surface-Shaping Approach For Control System Analysis And The Design Of Nonlinear Wave Energy Converters, Shadi Darani, Ossama Abdelkhalik, Rush D. Robinett Iii, David Wilson

Department of Mechanical and Aerospace Engineering Publications

The dynamic model of Wave Energy Converters (WECs) may have nonlinearities due to several reasons such as a nonuniform buoy shape and/or nonlinear power takeoff units. This paper presents the Hamiltonian Surface-Shaping (HSS) approach as a tool for the analysis and design of nonlinear control of WECs. The Hamiltonian represents the stored energy in the system and can be constructed as a function of the WEC’s system states, its position, and velocity. The Hamiltonian surface is defined by the energy storage, while the system trajectories are constrained to this surface and determined by the power flows of the applied non-conservative …