Engineering Commons^™

Differential Gene Expression In A Louisiana Strain Of Microalgae, John Joseph Tate

LSU Master's Theses

Considerable interest in alternative energy has stimulated research in biofuels, particularly microalgal biofuels. In particular, strains of algae that accumulate lipids to be used for biofuels must be adapted to outdoor growth and resistant to invasive species. Differential gene expression in a Louisiana algae/cyanobacteria co-culture consisting of approximately 97% Chlorella vulgaris and 3% Leptolyngbya sp. possessing these traits was examined. Possible reasons for the enhanced growth of the co-culture relative to a Chlorella monoculture were reviewed, including cyanobacterial symbiosis and chemicals produced by cyanobacteria or bacteria that could influence the growth of Chlorella. The co-culture and Chlorella monoculture were cultivated …

Risk Of Well Integrity Failure Due Sustained Casing Pressure, Koray Kinik

LSU Master's Theses

Sustained casing pressure (SCP) is considered a well integrity problem. The approach of this study is to look at SCP as environmental risk due hydrocarbon release. Currently, the risk is qualified by the value of surface pressure (Pcsg) that may cause failure of casing head. However, the resulting rate of gas emission to the atmosphere is not considered. Also not considered is a possibility of breaching the casing shoe due transmission of Pcsg downhole. The objective of this study is to develop methods for maximum possible air emission rates (MER) and risk of subsurface well integrity failure due SCP. Mathematical …

Numerical Study Of Laterally Loaded Batter Pile Groups With The Application Of Anisotropic Modified Cam-Clay Model, Yida Zhang

LSU Master's Theses

This study presents a series of numerical studies of laterally loaded batter pile groups based on data of the full-scale lateral load test on M19 eastbound pier foundation of the new I-10 Twin Span Bridge, Louisiana. The numerical studies include several continuum-based 3D finite element analyses on batter/vertical pile/pile groups and a FB-MultiPier analysis of the pile foundation. The Anisotropic Modified Cam Clay Model, has been implemented into UMAT and applied for describing clay behavior in all FE models. The explicit substepping scheme with modified Euler algorithm is selected to implement the model in ABAQUS software. The resultant UMAT shows …

Multiscale Viscoplastic-Viscodamage Analysis Of Shape Memory Polymer Fibers With Application To Self Healing Smart Materials, Amir Shojaei

LSU Doctoral Dissertations

Self-healing smart material systems have been introduced into the research arena and they have already been deployed into industrial applications. The Close-Then-Heal (CTH) healing mechanism for polymeric self-healing systems is addressed herein and then a new generation of Shape Memory Polymer (SMP) based self-healing system is proposed in this work. This system incorporates SMP fibers to close the cracks while the embedded Thermoplastic Particles (TPs) are diffused into the crack surfaces upon heating and provide a molecular level of healing. The SMP fiber manufacturing procedure is briefly addressed in this work in which the bobbin of SMP fibers are heat …

Frp Stiffener Efficiency Coefficient For Sbs Shear Strengthening Applications, Hamed Babaizadehroshanfekr

LSU Master's Theses

The use of composite materials such as Fiber Reinforced Polymer (FRP) to strengthen concrete structures has surged during the past two decades as an alternative for conventional methods of structural strengthening and repair. FRP materials are light and relatively easy to install. They are noncorrosive, durable and less vulnerable to environmental conditions in comparison to other construction and retrofitting materials. The knowledge and applications of composites for strengthening steel structures are relatively smaller when compared to concrete strengthening applications. Strengthening-By-Stiffening (SBS) is a new strengthening alternative that was developed at Louisiana State University. SBS has proven to be a practical …

Continuum And Crystal Strain Gradient Plasticity With Energetic And Dissipative Length Scales, Danial Faghihi Shahrestani

LSU Doctoral Dissertations

This work, standing as an attempt to understand and mathematically model the small scale materials thermal and mechanical responses by the aid of Materials Science fundamentals, Continuum Solid Mechanics, Misro-scale experimental observations, and Numerical methods. Since conventional continuum plasticity and heat transfer theories, based on the local thermodynamic equilibrium, do not account for the microstructural characteristics of materials, they cannot be used to adequately address the observed mechanical and thermal response of the micro-scale metallic structures. Some of these cases, which are considered in this dissertation, include the dependency of thin films strength on the width of the sample and …

Plasmonic Devices For Manipulating Light At The Nanoscale: Slow-Light Waveguides And Compact Couplers, Yin Huang

LSU Doctoral Dissertations

In this dissertation, I explore new plasmonic structures and devices for manipulating light at the nanoscale: slow-light waveguides and compact couplers. I first introduce a plasmonic waveguide system, based on a plasmonic analogue of electromagnetically induced transparency (EIT), which supports a subwavelength slow-light mode, and exhibits a small group velocity dispersion. The system consists of a periodic array of two metal-dielectric-metal (MDM) stub resonators side-coupled to a MDM waveguide. Decreasing the frequency spacing between the two resonances increases the slowdown factor and decreases the bandwidth of the slow-light band. I also show that there is a trade-off between the slowdown …

The Effects Of Lean Intervention (5s) On Perceived Musculoskeletal Workload And Perceived Hazardous Working Conditions In A Health Center Pharmacy, Jastinder Singh Dhindsa

LSU Master's Theses

The healthcare industry involves a significant level of health and safety risks in various work processes, and healthcare professionals are at risk for work-related musculoskeletal disorders and other health problems. In recent years, Lean has been introduced in healthcare with the goal of eliminating waste and improving efficiency. Lean is also believed to affect the health and safety of workers. The present research studies the effects of Lean (5S) implementation in an acute care pharmacy of a health center. A version of the Dutch Musculoskeletal Questionnaire (DMQ) was used to record the perceived musculoskeletal workload and perceived hazardous working conditions. …

Lipid Production From A Louisiana Native Chlorella Vulgaris/Leptolyngbya Sp. Co-Culture For Biofuel Applications, Rong Bai

LSU Doctoral Dissertations

Over the last several decades, microalgae have garnered great interest for biofuel production mainly due to the high lipid productivity and minimum land competition with food crops. In this research, a Louisiana native Chlorella vulgaris/Leptolyngbya sp. co-culture was selected for lipid production. The goal of this work is to improve the lipid productivity and lipid composition of this co-culture via optimizing irradiance and nitrogen levels, lipid extraction method and modeling of pilot photobioreactor (HISTAR). Effects of irradiance and nitrate nitrogen levels on total lipid yield, neutral lipid portion, and fatty acid profile of non-aerated and aerated co-cultures were investigated in …

Optimal Actuation In Active Vibration Control Using Pole-Placement, Carla Ann Guzzardo

LSU Doctoral Dissertations

The purpose of this study was to find and demonstrate a method of optimal actuation in a mechanical system to control its vibration response. The overall aim is to develop an active vibration control method with a minimum control effort, allowing the smallest actuators and lowest control input. Mechanical systems were approximated by discrete masses connected with springs and dampers. Both numerical and analytical methods were used to determine the optimum force selection vector, or input vector, to accomplish the pole placement, finding the optimal location of actuators and their relative gain so that the control effort is minimized. The …

New Coding/Decoding Techniques For Wireless Communication Systems, Yonas Gebregziabher Debessu

LSU Doctoral Dissertations

Wireless communication encompasses cellular telephony systems (mobile communication), wireless sensor networks, satellite communication systems and many other applications. Studies relevant to wireless communication deal with maintaining reliable and efficient exchange of information between the transmitter and receiver over a wireless channel. The most practical approach to facilitate reliable communication is using channel coding. In this dissertation we propose novel coding and decoding approaches for practical wireless systems. These approaches include variable-rate convolutional encoder, modified turbo decoder for local content in Single-Frequency Networks, and blind encoder parameter estimation for turbo codes. On the other hand, energy efficiency is major performance issue …

Design Of Reverse Converters For The Multi-Moduli Residue Number Systems With Moduli Of Forms 2a, 2b - 1, 2c + 1, Naveen Kumar Samala

LSU Master's Theses

Residue number system (RNS) is a non-weighted integer number representation system that is capable of supporting parallel, carry-free and high speed arithmetic. This system is error-resilient and facilitates error detection, error correction and fault tolerance in digital systems. It finds applications in Digital Signal Processing (DSP) intensive computations like digital filtering, convolution, correlation, Discrete Fourier Transform, Fast Fourier Transform, etc. The basis for an RNS system is a moduli set consisting of relatively prime integers. Proper selection of this moduli set plays a significant role in RNS design because the speed of internal RNS arithmetic circuits as well as the …

Linear Pm Generator For Wave Energy Conversion, Rajkumar Parthasarathy

LSU Master's Theses

The main objective of this thesis is to design a selected version of linear PM generator and to determine the electromechanical characteristics at variable operating conditions. To reach this objective, the linear generator with quasi-flat linear machine structure was selected and designed using the magnetic circuit theory. By applying 2-D and 3-D FEM the magnetic circuit was optimized and parameters of equivalent circuit were determined. The performance of generator operation are analyzed in steady-state and in dynamic conditions using MATLAB/SIMULINK. The analysis has been carried out at the secondary variable speed, which is changing sinusoidally according to the motion of …

Dynamic Route Choice In Hurricane Evacuation, Meisam Akbarzadeh

LSU Doctoral Dissertations

In this research a framework is developed for modeling route choice in hurricane evacuation. Two behavioral hypotheses are evaluated which together with the route choice model, constitute the contributions of the research. The first hypothesis states that beside congestion, other variables such as familiarity with the route, availability of fuel and shelter, facility class, and length of route have an effect on an evacuees' route choice. The second hypothesis states that as time passes and storm conditions change, the impact each variable has on route choice changes. The logit structure was used for modeling the choice process and stated choice …

Bucky Gel Actuator For Morphing Applications, Ali Kadkhoda Ghamsari

LSU Doctoral Dissertations

Since the demonstration of Bucky Gel Actuator (BGA) in 2005, a great deal of effort has been exerted to develop novel applications for electro-active morphing materials. Three-layered bimorph nanocomposite has become an excellent candidate for morphing applications since it can be easily fabricated, operated in air, and driven with few volts. There has been limited published study on the mechanical properties of BGA. In this study, the effect of three parameters: layer thickness, carbon nanotube type, and weight fraction of components, on the mechanical properties was investigated. Samples were characterized via nano-indentation and DMA. It was found that BGA composed …

Optimal Production And Delivery Scheduling Models For A Supply Chain System Of Deteriorating Items, Bingqing Wu

LSU Master's Theses

The market is varying from minute to minute nowadays. Increase cooperation and pursue the optimal interest of the integrated supply chain become a more effective way than act alone in the competition. In this research, an integrated inventory policy between singleproducer and multi-buyer is developed and two inventory models are built. The first model extends the research of Lin and Lin (2007) by changing the single-buyer system to the multibuyers one. Both backorder of buyers and deteriorating items of each party (producer’s level, buyers’ level, and during transport) are considered herein. The second model is based on the research of …

Strategies For Real Time Reservoir Management, Yuanyuan Shuai

LSU Doctoral Dissertations

Real–time reservoir management is developed to manage a shrinking labor force and rising demand on energy supply. This dissertation seeks good strategies for real–time reservoir management. First, two simulator–independent optimization algorithms are investigated: ensemble–based optimization (EnOpt) and bound optimization by quadratic approximation (BOBYQA). Multiscale regularization is applied to both to find appropriate frequencies for well control adjustment. Second, two gathered EnKF methods are proposed to save computational cost and reduce sampling error: gathered EnKF with a fixed gather size and adaptively gathered EnKF. Finally, oil price uncertainty is forecasted and quantified with three price forecasting models: conventional forecasting, bootstrap forecasting …

Numerical And Experimental Evaluation Of Preheated Premixed Flames At Lean And Rich Conditions, Joseph Edward Gibson

LSU Master's Theses

Preheating a combustible mixture enhances the laminar burning flux characteristic m_ad with high reaction firing rates. As a result, the flammable zone as defined by inlet conditions of equivalence ratio and temperature is expanded beyond that available at standard ambient conditions; however, fundamental questions in these combustion regimes have not been addressed. In this thesis, preheated lean and rich combustion of methane/air mixtures is studied numerically and experimentally to catalog and confirm expected trends in these regimes. Numerical simulations were completed using both GRI-Mech 3.0 and San Diego mechanisms in the combustion code Cantera. An adiabatic simulation data set …

Determining The Performance Of Breakwaters During High Energy Events: A Case Study Of The Holly Beach Breakwater System, Andrew Keane Woodroof

LSU Master's Theses

Breakwaters have been constructed in many areas along Louisiana’s coastline to protect the shoreline from wave energy and erosion. During normal conditions, these breakwaters can typically be analyzed using traditional empirical methods for emergent breakwaters. However, Louisiana’s coastline is under constant threat from tropical storms and hurricanes, during which breakwaters can frequently become overtopped or submerged systems. Recent studies show that the type of shoreline response to a breakwater system may vary depending on the crest height of the breakwater in relation to the mean water level. Though emergent breakwaters typically induce sediment accretion along the shoreline, studies using laboratory …

Improving Discourse Structure Identification, Jamie Allison Guidry

LSU Master's Theses

Rhetorical Structure Theory (Mann et al. 1988), a popular approach for analyzing discourse coherence, suggests that coherent text can be placed into a hierarchical organization of clauses. Identification of a text’s rhetorical structure through automatic discourse analysis is a crucial element for many of today’s Natural Language Processing tasks, but no sufficient tool is available. The current state-of -the-art discourse parser, SPADE (Soricut et al. 2003), is limited to parsing discourse within a single sentence. HILDA (Hernault et al. 2010) extends the parsing abilities of SPADE to the document level, but with a decrease in performance. This study achieved document-level …

Biologically Dominated Engineered Coastal Breakwaters, Jon David Risinger

LSU Doctoral Dissertations

Coastal land loss in Louisiana is occurring at astounding rates. New technologies for shoreline protection are needed that incorporate traditional engineering designs with natural systems (e.g., oyster reefs). Under optimal environmental conditions eastern Oysters (Crassotrea virginica) can biologically dominate artificial concrete reef structures used as coastal breakwaters within the intertidal zone. These reefs can also serve as oyster broodstock sanctuaries providing a nexus to the public oyster grounds benefiting the aquaculture industry. The use of biologically dominated, engineered breakwaters may provide a viable solution to coastal restoration and shoreline protection challenges. Biologically dominated coastal breakwaters can be integrated into coastal …

Field Investigation Of Wave And Surge Attenuation In Salt Marsh Vegetation And Wave Climate In A Shallow Estuary, Ranjit S. Jadhav

LSU Doctoral Dissertations

This research investigates and quantifies the effectiveness of salt marsh vegetation in reducing storm-induced waves and surge, and the potential for wetland erosion due to wave action, using field measurements on the Louisiana coast. To quantify wave attenuation and wave energy dissipation by vegetation (Spartina alterniflora), wave data were measured along a transect using pressure transducers during two tropical storms. Measurements showed that incident waves attenuated exponentially over the vegetation. The linear spatial wave height reduction rate increased from 1.5% to 4% /m as incident wave height decreased. The bulk drag coefficient estimated from the field measurements decreased with increasing …

A Modeling, Optimization, And Analysis Framework For Designing Multi-Product Lignocellulosic Biorefineries, Paritosh Kumar Sharma

LSU Doctoral Dissertations

The objective of this research is to propose a methodology to develop modular decision analysis frameworks to design value chains for enterprises in the renewable fuels and chemicals sector. The decision support framework focuses on providing strategic decision support to startup and new product ventures. The tasks that are embedded in the framework include process and systems design, technology and product selection, forecasting cost and market variables, designing network capacities, and analysis of risks. The Decision support system (DSS) proposed is based on optimization modeling; systems design are carried out using integer programming with multiple sets of process and network …

Copper-Cobalt Catalysts For Conversion Of Syngas To Ethanol And Higher Alcohols, Miranda Louise Smith

LSU Doctoral Dissertations

Higher alcohols produced by catalytic conversion of synthesis gas are potential octane enhancers for transportation fuels. Copper-cobalt catalysts have emerged as alternatives to the ethanol-selective, but expensive, rhodium-based ones. The reducibility of the catalyst and the CO adsorption mode are important factors in directing the selectivity of CO hydrogenation toward methanol, hydrocarbons, or higher alcohols. In this study, Cu/SiO2, Co/SiO2, and bimetallic CuCo/SiO2 catalysts, as well as their tin-promoted analogues, were synthesized and characterized by TPR, in situ XRD, in situ XANES, and in situ DRIFTS. Cobalt addition to Cu/SiO2 created an amorphous fraction of CuO that was more easily …

Pdms Based Waveguides For Microfluidics And Eocb, Weiping Qiu

LSU Master's Theses

Due to the low cost, fast and ease of molding, PDMS has become one of the most popular materials for microfluidics devices, bioMEMS applications. Meanwhile, the integration of different functional components on to one single chip (or Lab on a Chip) is the dream for many scientists and engineers in the related area. In addition to the necessary mechanical components for accommodating the reactions, such as pumps, valves, mixers and so on, optical components such as waveguides, lens, interferers are all desired to be lumped into such a system.

The waveguide for such a system requires the material to have …

The Worst Case Discharge Scenario, Noah Mcgill

Honors Capstones

No abstract provided.

Catalytic Process For The Conversion Of Synthesis Gas To Ethanol For Use As An Alternative Fuel, Nitin Kumar

LSU Doctoral Dissertations

Higher alcohols are increasing as a proportion of the transportation fuel market, and can be used as neat fuels, or as blends with conventional fuels. For a number of reasons, these C2+-alcohols will be of interest in the foreseeable future. Large-scale production of higher alcohols will likely be carried out via syngas, which can be produced from a number of feedstocks, including coal, natural gas and biomass. Rhodium-based catalysts have been found to be the most active/selective for higher alcohols. However, the literature shows that the yields of C2+-alcohols that can be achieved with current catalysts, even the most active/selective, …

Surface Functionalization Of Crystalline Silicon Substrates, Sri Sai Vegunta

LSU Doctoral Dissertations

In this work, various chemical and electrochemical methods were demonstrated to attach application-specific organic monolayers to crystalline silicon substrates. In one study, alkyl monolayers were anodically electrografted or thermally grafted onto planar (100) silicon substrates using Grignard precursors. The results show electrografted methyl monolayers provide a stable Si-C termination, resisting oxidation on (100) surfaces for approximately 55 days in air. The alkyl termination could provide a potential alternative to defective native oxides and kinetically unstable hydride surfaces. A mechanism involving two electron transfers per grafting event was established for both the thermal and electrochemical routes. In another study, unsaturated organic …

Efficient And Robust Signal Detection Algorithms For The Communication Applications, Lu Lu

LSU Doctoral Dissertations

Signal detection and estimation has been prevalent in signal processing and communications for many years. The relevant studies deal with the processing of information-bearing signals for the purpose of information extraction. Nevertheless, new robust and efficient signal detection and estimation techniques are still in demand since there emerge more and more practical applications which rely on them. In this dissertation work, we proposed several novel signal detection schemes for wireless communications applications, such as source localization algorithm, spectrum sensing method, and normality test. The associated theories and practice in robustness, computational complexity, and overall system performance evaluation are also provided.

A Biomimic Self-Healing Shape Memory Polymer Based Syntactic Foam For Smart Structural Composites, Jones Nji

LSU Doctoral Dissertations

This study explored the development of a new self-healing Polystyrene Shape Memory Polymer (PSMP) based syntactic foam for service life extension in structural polymeric composites. The objective was to self-heal structural-length scale damage in an autonomous, efficient, timely and repeatable manner at the molecular-length scale. Self-healing is achieved through a novel two step close-then-heal (CTH) self-healing scheme, designed to mimic the natural biological process of wound healing in humans. A new methodology to fabricate three-dimensional (3-D) fiber reinforced shape memory polymer syntactic foam for structural applications was developed. The effect of impact energy on the ability for the 3-D fiber …