Engineering Commons^™

Solar One: A Proposal For The First Crewed Interstellar Spacecraft, Alberto Caballero

International Journal of Aviation, Aeronautics, and Aerospace

In this paper it is presented the concept and design of a new type of spacecraft that could be used to make the first manned interstellar travel. Solar one would integrate three near-term technologies, namely: compact nuclear fusion reactors, extremely large light sails, and high-energy laser arrays. A system of lenses or mirrors to propel the sail with sunlight is suggested as an alternative to laser propulsion. With a mile-long light sail, Solar One could reach an average of 22% the speed of light, arriving to the closest potentially habitable exoplanet in less than 19 years with the help of …

The Current State Of Counter Unmanned Aerial System Policy In The U.S., Travis L. Cline, Damon Lercel, Umit Karabiyik, J. Eric Dietz

International Journal of Aviation, Aeronautics, and Aerospace

Threats from drones are becoming an increasing security concern throughout the U.S. and worldwide. No current standards exist for the manufacture and operation of counter unmanned aerial system technology, making it difficult to determine effective systems and components for specific uses. Current policy within the U.S. makes unmanned aerial system (UAS) interdiction illegal for all but a few Federal entities currently. This document is a summary of counter unmanned aerial systems policy within the U.S.

Experimental Evaluation Of Strength Degradation Temperature For Carbon Epoxy Filament Wound Composite, Jai Krishna Mishra, Surya Prakash Rao Ch Dr, Subhash Chandra Bose P Dr, Kishore Nath N Dr, Rama Rao Golla Mr

International Journal of Aviation, Aeronautics, and Aerospace

Polymeric composites have been widely used in various structural and thermal aerospace applications. Polymeric composites having high strength and high modulus reinforcement are ideally suited for lot of critical aerospace applications as structure is designed with high specific strength and high specific modulus. In case of launch vehicles/ missile one such application is design and manufacturing of solid rocket motor casing with polymeric composites as it give high performance and reduces inert weight of propulsion system. The high specific strength and high specific modulus of composite materials makes it ideal choice for designing the composite rocket motor case (CRMC). These …

The Detrimental Effect Of Rainfall On Performance And Stability Characteristics Of Aircrafts-A Comprehensive Review, Praneeth Hr Mr, Amit Kumar Thakur Dr

International Journal of Aviation, Aeronautics, and Aerospace

The rapidly growing global market demands faster transit of human beings and goods even in unfavorable weather conditions of rainfall. The paper gives an overview of rain research methodologies, mathematical models to track raindrops in the flow field. The paper depicts the havoc rainfall causes on performance characteristics for various phases of flight in terms of evaluation of C_L and C_D and dynamic performance parameters such as short period mode. The knowledge obtained by this review paper could help designers to modify the design of aircraft such that it has better performance, stability, and control characteristics for all …

Real-Time Urban Weather Observations For Urban Air Mobility, Kevin A. Adkins, Mustafa Akbas, Marc Compere

International Journal of Aviation, Aeronautics, and Aerospace

Cities of the future will have to overcome congestion, air pollution and increasing infrastructure cost while moving more people and goods smoothly, efficiently and in an eco-friendly manner. Urban air mobility (UAM) is expected to be an integral component of achieving this new type of city. This is a new environment for sustained aviation operations. The heterogeneity of the urban fabric and the roughness elements within it create a unique environment where flight conditions can change frequently across very short distances. UAM vehicles with their lower mass, more limited thrust and slower speeds are especially sensitive to these conditions. Since …

Experimental And Computational Evaluation Of Five Hole Five Probe Flow Analyzer For Subsonic Wind Calibration, Akhila Rupesh Ms, J V Muruga Lal Jeyan Dr

International Journal of Aviation, Aeronautics, and Aerospace

It is very essential to predict the flow and its related parameters to understand real life fluid flow. The real-life fluid problems are studied with wind tunnels which gives very efficient results in practice. But in the case of wind tunnel studies flow angularities plays crucial role. Flow angularity determination includes measurement of static pressure, dynamic pressure and inflow angles. Flow prediction even hold a very strong hand in design process. Designing and testing being the foundation of any process industry, flow measurements and its related parameters have to be well evaluated. In such cases, wind tunnels play important role …

Evaluating The Merit Of Implementing A Safety Management System Into An Unmanned Aerial Systems Company, Nathan Phillips, Jennifer Herr

International Journal of Aviation, Aeronautics, and Aerospace

Safety Management System (SMS) implementation into small Unmanned Aerial System (UAS) organizations is only now beginning to happen. Because of the lack of research into this area and its cutting edge application in unmanned aviation, a look into the potential benefits as well as the differences from manned avation seems appropriate.

Assessment Of Egnos Performance For Civil Aviation Flight Phase In The Edge Coverage Area, Bilal Beldjilali, Salem Kahlouche, Lahouaria Tabti

International Journal of Aviation, Aeronautics, and Aerospace

The performances of the navigation systems used for different flight phases especially in the landing of an aircraft must be very high. The International Civil Aviation Organization defines the standards which must meet by any navigation systems to be certified, so it can be used by civil aircraft. To achieve the level of security defined by the International Civil Aviation Organization, new augmentation systems based satellites are developed. In Europe, the EGNOS system was developed to improve both GPS and Galileo performance. In this paper the performance of the EGNOS system for civil aviation flight phase was investigated. Four parameters …

Open-Ended Capstone Project: Designing And Manufacturing Of A Low-Cost Carbon Fiber Reinforced Composite Suborbital Rocket Payload Housing Using A 3d Printed Core, Garam Kim, Sergey Dubikovsky, Peng Hao Wang, Ronald Sterkenburg

International Journal of Aviation, Aeronautics, and Aerospace

Composite materials are utilized in many industries today due to its high performance and lightweight. However, the part manufacturing process of traditional composites is complicated and often involves high cost. The molds used for composite manufacturing are usually one of the contributors to the high part manufacturing cost. The authors demonstrated in this paper a manufacturing process for a carbon fiber reinforced composite rocket payload housing using an additively manufactured polylactic acid (PLA) payload housing core. The paper also demonstrates the designing and manufacturing of a functional product, which was used in a real-life application, achieved by college undergraduate students. …

Automatic Gaze Classification For Aviators: Using Multi-Task Convolutional Networks As A Proxy For Flight Instructor Observation, Justin Wilson, Sandro Scielzo, Sukumaran Nair, Eric C. Larson

International Journal of Aviation, Aeronautics, and Aerospace

In this work, we investigate how flight instructors observe aviator scan patterns and assign quality to an aviator's gaze. We first establish the reliability of instructors to assign similar quality to an aviator's scan patterns, and then investigate methods to automate this quality using machine learning. In particular, we focus on the classification of gaze for aviators in a mixed-reality flight simulation. We create and evaluate two machine learning models for classifying gaze quality of aviators: a task-agnostic model and a multi-task model. Both models use deep convolutional neural networks to classify the quality of pilot gaze patterns for 40 …

Wildlife Hazards At Airports: A Practical Review, Robert Sliwinski, Flavio A. C. Mendonca

Publications

Globally, aircraft accidents and incidents due to wildlife strikes are an increasingly serious safety concern;

Airport operators have a professional and legal responsibility to provide an environment conducive to safe aircraft operations;

Airport operators and managers have been sued for property damage and / or for human injuries and death in the aftermath of aircraft accidents due to wildlife strikes.

Environmental Advantages In Additive Manufacturing, Analise Walter, Cheryl Marcham

Publications

Additive Manufacturing (AM) is a technology that uses a variety of methods to ultimately apply layers of material and create products (Ford & Despeisse, 2016; Ford, Mortara & Minshall, 2016). Although there has been an expansion in recent technology, AM has been used in manufacturing for a few decades (Ford, Mortara, et al., 2016). Since the late 1980s, AM has grown from simple product designs, with a focus on prototyping and customization, to modern times with billions of dollars in revenue and large-scale production of consumer and industrial products (Cotteleer, 2014). Forecasts showed a near $10 billion market by 2020, …

Airport Operations Delays And Possible Mitigation Through Electric Taxi Systems: A Qualitative Case Study, David Cross, Kristy Kiernan, Mark Scharf Phd

Publications

Airline daily departures, not including private aircraft, increased from 25,143 in 2000 to 36,722 in 2017. More passengers necessitate more aircraft and more flights. With more aircraft at terminals, ground delays, based on current airport design, will continue to increase. Systems that allow for reduced aircraft time on the ground will improve airline economics and airport operations, in addition, will reduce airline delays both for departure and arrival at the gate. The purpose of this qualitative research study was to explore the efficacy, from ramp controllers’ perspectives, of equipping airliners with an electric taxi system. Prototype electric taxi systems have …

Set And Spike: Mentoring A Student-Athlete In Stem For Undergraduate Engineering Education Research, Leroy Long Iii, Mckenna D. Gooch

Publications

It is well known that student-athletes are more diverse and higher academic achievers, on average, than their collegiate peers. However, little research has explored the mentoring relationships of student-athletes who conduct undergraduate research. Unique challenges and opportunities exist for student-athletes and faculty when it comes to mentoring undergraduate research in fields like science, technology, engineering and math (STEM). Using a collaborative autoethnographic methodological approach and apprenticeship theory, our personal narratives detail how an engineering professor mentored a former engineering student-athlete for undergraduate engineering education research. We offer several findings and recommendations.

Monte Carlo Simulations Of Coupled Transient Seepage Flow And Compressive Stress In Levees, Fred Thomas Tracy, Ghada Ellithy, Jodi L. Ryder, Martin T. Schultz, Benjamin R. Breland, T. Chris Massey, Maureen K. Corcoran

Publications

The purpose of this research is to compare the results from two different computer programs of flow analyses of two levees at Port Arthur, Texas where rising water of a flood from Hurricane Ike occurred on the levees. The first program (Program 1) is a two-dimensional (2-D) transient finite element program that couples the conservation of mass flow equation with accompanying hydraulic boundary conditions with the conservation of force equations with accompanying x and y displacement and force boundary conditions, thus yielding total head, x displacement, and y displacement as unknowns at each finite element node. The second program (Program …

Thermodynamic Model Of Co2 Deposition In Cold Climates, Sandra K. S. Boetcher, Ted Von Hippel, Matthew J. Traum

Publications

A thermodynamic model, borrowing ideas from psychrometric principles, of a cryogenic direct-air CO2-capture system utilizing a precooler is used to estimate the optimal CO2 removal fraction to minimize energy input per tonne of CO2. Energy costs to operate the system scale almost linearly with the temperature drop between the ingested air and the cryogenic desublimation temperature of CO2, driving siting to the coldest accessible locations. System performance in three Arctic/Antarctic regions where the proposed system can potentially be located is analyzed. Colder ambient temperatures provide colder system input air temperature yielding lower CO2 removal energy requirements. A case is also …

Fatigue Issues And Mitigation Strategies In Collegiate Aviation, Flavio A. C. Mendonca Ph.D., Julius Keller, Erik Levin, Aaron Teo

Publications

The reduction of fatigue-related accidents has been in the NTSB most wanted list since 2016 (NSTB, 2019).

Most research studies have focused on fatigue identification and management within the commercial and/or military aviation environments (Caldwell et al., 2009; Gawron, 2016; Sieberichs & Kluge, 2016).

However, collegiate aviation may be the most challenging in terms of fatigue mitigation. Flight instructors and students often have schedules which may increase the risks for fatigue.

The Effectiveness Of Augmented Reality For Astronauts On Lunar Missions: An Analog Study, Godfrey Valencio D’Souza

Doctoral Dissertations and Master's Theses

The uses of augmented reality and head-up displays are becoming more prominent in industries such as aviation, automotive, and medicine. An augmented reality device such as the Microsoft HoloLens can project holograms onto the user’s natural field of view to assist with completion of a variety of tasks. Unfortunately, only a little research and development has begun in the space sector for astronauts using these head-up displays. Future lunar missions could incorporate augmented reality for astronauts to ease task load and improve accuracy. This study evaluated the usability, subjective workload, and task performance of 22 participants using the Microsoft HoloLens …

Development Of A Research Spacecraft Test-Bed With Implementation Of Control Laws To Compensate Undesired Dynamics, Yomary Angélica Betancur Vesga

Doctoral Dissertations and Master's Theses

The development of research spacecraft systems has a significant impact on the preparation and simulation of future space missions. Hardware, software and operation procedures can be adequately tested, validated and verified before they are deployed for the actual mission. In this thesis, a spacecraft vehicle test-bed named Extreme Access System (EASY) was developed. EASY aims at supporting validation and verification of guidance, navigation and control algorithms. Description of EASY spacecraft systems, sub-systems and integration is presented in this thesis along with an analysis of results from numerical simulation and actual implementation of control laws. An attitude control architecture based on …

Fuel Efficient Control Design And Constrained Motion Analysis For Spacecraft Coulomb Formation In Elliptic Chief Orbits, Muhammad Wasif Memon

Doctoral Dissertations and Master's Theses

The use of Coulomb force has been analyzed in recent years to provide propulsion in space for various applications. Coulomb formation can also be utilized to make close formation spacecraft missions fuel efficient. In this study, the Coulomb formation of two craft is studied in elliptic chief orbits for two formation geometries. The first formation requires both spacecraft to be aligned along the nadir (radial) direction and the second formation requires both spacecraft to maintain a constant separation distance relative to each other while each spacecraft rotates freely on the surface of a sphere with the ratio of the radii …

Numerical Investigation Of Scaling Effects Of A Ramjet-Powered Projectile, Arjun Jaishankar Vedam

Doctoral Dissertations and Master's Theses

Ramjet flowpath miniaturization is a potentially useful technology for integration into munitions to increase range, accuracy, and lethality. The emphasis of this effort is to numerically characterize the performance of a miniature hydrogen-fueled and ethylene-fueled ramjet flowpath during Mach 3 and Mach 3.5 sea-level flight. The effect of geometric scale on ramjet performance is evaluated using high-fidelity RANS CFD models. Sensitivity to nonequilibrium laminar and turbulence-limited chemistry, and transitional turbulence treatments are evaluated. The physical sources of small scale performance limitations are identified for both fuel types. Finally, flowpath integration for small-scale applications is briefly addressed.

In-Situ Measurement Of Resin Shrinkage For Aerospace Components, Samarth Motagi

Doctoral Dissertations and Master's Theses

Resin shrinkage due to chemical changes and thermal gradients plays an important role in the residual stress evolution during composite manufacturing. In this thesis, we develop a new in-situ experimental approach for measuring resin shrinkage during curing with the help of digital image correlation (DIC) instrumented on a specially designed autoclave with borosilicate viewports. The images of the resin sample are captured at regular intervals with the help of DIC to measure the displacement and strains during the curing process. We utilize this method for a comparative analysis of resin shrinkage in two common aerospace epoxies, Epoxy 105 and EPON …

Adaptive Learning Terrain Estimation For Unmanned Aerial Vehicle Applications, Pedro L. Vergara Garcia

Doctoral Dissertations and Master's Theses

For the past decade, terrain mapping research has focused on ground robots using occupancy grids and tree-like data structures, like Octomap and Quadtrees. Since flight vehicles have different constraints, ground-based terrain mapping research may not be directly applicable to the aerospace industry. To address this issue, Adaptive Learning Terrain Estimation algorithms have been developed with an aim towards aerospace applications. This thesis develops and tests Adaptive Learning Terrain Estimation algorithms using a custom test benchmark on representative aerospace cases: autonomous UAV landing and UAV flight through 3D urban environments. The fundamental objective of this thesis is to investigate the use …

Computational Model For Pedestrian Movement And Infectious Diseases Spread During Air Travel: A Molecular Dynamics-Like Numerical Approach, Pierrot Derjany

Doctoral Dissertations and Master's Theses

There is direct evidence of the transmission of fatal infectious pathogens in large human gatherings. Air transportation is no exception. The mixing of susceptible and infectious individuals in this high-density man-made environment involves pedestrian movement which is generally not taken into account in modeling studies of disease dynamics. This thesis addresses this problem through a multiscale model that combines pedestrian dynamics with stochastic infection spread models. This generic model is applicable to several directly transmitted diseases. Through this multiscale framework, the effectiveness of certain layout and strategies in suppressing the disease spread in highly crowded locations such as airplanes, airports …

A Step Toward Ending Long Airport Security Lines: The Modified Boarding Pass, Joel Lee

Doctoral Dissertations and Master's Theses

Anyone who has traveled by air has most likely experienced long airport security lines. Yet not much is known about its cause because few have considered if passengers have created this problem for themselves. The present study attempts to fill this research gap by suggesting that when passengers are not well-prepared for security screening, they delay the process by making mistakes and not complying with procedures. This lack of preparedness can be attributed to several shortcomings of security signposts. This study proposes the use of a modified boarding pass as an alternative form of signage to help passengers better prepare …

Astrodynamics Of The Next Generation Space Weather Prediction Mission, Mark Herring

Doctoral Dissertations and Master's Theses

Accurate prediction of the solar wind properties, interplanetary magnetic field direction and various space weather phenomena becomes ever more important as our dependence on Earth orbiting spacecraft increases. Different solar wind drivers can lead both to enhancements and losses of relativistic electrons in the outer radiation belts, thus posing a major risk to satellites. To further our understanding of the Sun’s impact on the near Earth space environment, as well as to provide predictive capabilities, a mission placing monitoring satellites in key orbits in the inner Solar System is being proposed. As part of that effort, the possibility of using …

Autonomous Autorotation Of A Tilt-Rotor Aircraft Using Model Predictive Control, Elias Wilson

Doctoral Dissertations and Master's Theses

Tilt rotor vehicles are governed by FAA laws also used for conventional helicopters, which require autorotational maneuvering and landing given a total power failure. With low inertia rotors and high disk loading of tilt rotor vehicles, this already difficult task becomes significantly more challenging. In this work, a model predictive controller is developed to autonomously maneuver and land a tilt rotor given complete power loss. A high fidelity model of a tilt rotor vehicle is created and used to simulate the vehicle dynamics and response to control inputs. A reduced order dynamic model is used within a model predictive control …

Multirotor Uas Sense And Avoid With Sensor Fusion, Jonathan Mark Buchholz

Doctoral Dissertations and Master's Theses

In this thesis, the key concepts of independent autonomous Unmanned Aircraft Systems (UAS) are explored including obstacle detection, dynamic obstacle state estimation, and avoidance strategy. This area is explored in pursuit of determining the viability of UAS Sense and Avoid (SAA) in static and dynamic operational environments. This exploration is driven by dynamic simulation and post-processing of real-world data. A sensor suite comprised of a 3D Light Detection and Ranging (LIDAR) sensor, visual camera, and 9 Degree of Freedom (DOF) Inertial Measurement Unit (IMU) was found to be beneficial to autonomous UAS SAA in urban environments. Promising results are based …

Wall-Jet Turbulence And Mixing Control By Way Of A Pulsed Inlet Velocity, Cristale D. Garnica Vallejo

Doctoral Dissertations and Master's Theses

Understanding wall-jet-induced turbulence and mixing is an important challenge in modern engineering, as drag reduction and mixing enhancement are attainable by modifying the flow development. Simulations are performed to investigate the effect on skin friction and flow mixing due to introducing controlled perturbations, at the initial shear layer of a planar wall-jet using jet inlet cyclic pulsing. The billow production by the Kelvin-Helmholtz instability, the instability that drives turbulence in a wall-jet, is modified by the excitation of the inlet velocity profile by a sine wave perturbation. Two types of wall-jet simulations are carried out, a two-dimensional compressible case at …

Effects Of Musical Ability On Flight Planning, Situational Awareness, And Flight Path Deviations, Andrew P. Henry

Doctoral Dissertations and Master's Theses

Numerous studies have been conducted on music education and the benefits that learning an instrument has on the brain. However, there is little research that connects a pilot’s ability to play an instrument to a pilot’s ability to fly an airplane. When learning an instrument, students learn non-musical abilities, such as executive functions, which may correspond with the skills necessary to be a good pilot. The purpose of this study was to find a relationship between learning a musical instrument and pilot performance, specifically related to flight planning, situational awareness, and flight path deviations. This study was a quasi-experimental design …