Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Chulalongkorn University

Discipline
Keyword
Publication Year
Publication
Publication Type

Articles 1021 - 1050 of 3655

Full-Text Articles in Engineering

Thermal And Mechanical Evaluation Of Natural Fibers Reinforced Gypsum Plaster Composite, Tugba Mutuk, Kerem Arpacioğlu, Sevim Alişir, Gökhan Demir Jan 2023

Thermal And Mechanical Evaluation Of Natural Fibers Reinforced Gypsum Plaster Composite, Tugba Mutuk, Kerem Arpacioğlu, Sevim Alişir, Gökhan Demir

Journal of Metals, Materials and Minerals

Many problems such as the increase in the world population, global drought, and greenhouse gases have caused materials used in industries to be reconsidered. This is how the concept of green composite material emerged. Using natural fibers to obtain such materials is important in terms of sustainability. This study is aimed to use hemp fiber and banana fiber as natural fiber additives in the gypsum composite to produce green bio-composite. Natural fibers are chemically modified with 5% NaOH solution. In this way, a good fiber/matrix interface interaction is provided. The composite hardness test result of 5 wt% HB fiber added …

Go to article

Investigation Of Oxide Scale Adhesion On Hot-Rolled Steel Using The Tensile Test And Acoustic Emission, Seksan Singthanu, Prayoon Surin, Manop Pipathattakul, Thanasak Nilsonthi Jan 2023

Investigation Of Oxide Scale Adhesion On Hot-Rolled Steel Using The Tensile Test And Acoustic Emission, Seksan Singthanu, Prayoon Surin, Manop Pipathattakul, Thanasak Nilsonthi

Journal of Metals, Materials and Minerals

This article addresses applying a tensile test with a CCD camera to assess scale adhesion on hot-rolled steel as a function of hot-rolled coil position. The scale adhesion in this study was shown in the value of the strain initiating the first scale spallation. The result of strain initiating the first scale spallation was confirmed with an acoustic emission (AE) method. The as-received hot-rolled coil was studied at the head, middle, and tail positions. A scanning electron microscope (SEM) and X-ray diffraction (XRD) were used to examine the scale morphology and phase identification respectively. The results show that the oxide …

Go to article

Effect Of Nano Cdo-Zno Content On Structural, Thermal, Optical, Mechanical And Electrical Properties Of Epoxy Composites, Chaitra Srikanth, Gattumane Motappa Madhu Jan 2023

Effect Of Nano Cdo-Zno Content On Structural, Thermal, Optical, Mechanical And Electrical Properties Of Epoxy Composites, Chaitra Srikanth, Gattumane Motappa Madhu

Journal of Metals, Materials and Minerals

Cadmium oxide doped zinc oxide nanoparticles were synthesized by solution combustion technique. CdO-ZnO nanoparticles were reinforced into epoxy by ultrasonication technique. CdO-ZnO nano-particles are well known semiconducting materials which are found to exhibit excellent semiconducting behavior even at high frequencies. Hence it was introduced into epoxy to study the semiconducting nature of CdO-ZnO/epoxy composites. The polymer composites exhibited interesting phenomenon such as minimum heat losses at high frequencies indicating semi-conducting behaviour of the composites. The polymer composite was also analysed for its structural, thermal, optical and mechanical properties. The enhanced interaction of CdO-ZnO nanoparticles with epoxy has resulted in superior …

Go to article

Synthesis Of Zinc Oxide Photocatalysts From Zinc-Dust Waste For Organic Dye Degradation, Wanwalee Promsuwan, Pornapa Sujaridworakun, Wuttichai Reainthippayasaku Jan 2023

Synthesis Of Zinc Oxide Photocatalysts From Zinc-Dust Waste For Organic Dye Degradation, Wanwalee Promsuwan, Pornapa Sujaridworakun, Wuttichai Reainthippayasaku

Journal of Metals, Materials and Minerals

Zinc-dust waste from a hot-dip galvanizing plant in the metal plating industry was successfully used as the starting material to synthesize zinc oxide (ZnO) nanopowder via a hydrothermal method. Effects of acid types in zinc-dust dissolving process and concentration of NaOH for precipitation on physical characteristics and photocatalytic activity of the synthesized ZnO were investigated. Elemental composition, phase and crystallite size, morphology with chemical composition, and specific surface area of the ZnO nanostructures were characterized by X-ray fluorescence spectroscopy (XRF), X-ray diffraction (XRD), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS), and gas adsorption-desorption analysis, respectively. The photocatalytic performance …

Go to article

Investigations Of Structural Modifications, Physical And Optical Properties Of Lead Boro-Tellurite Glasses Doped With Europium Trioxide For Possible Optical Switching Applications, G. V. Jagadeesha Gowda, G. V. Ashok Reddy, Bheemaiah Eraiah, Chinnappa Reddy Devaraja Jan 2023

Investigations Of Structural Modifications, Physical And Optical Properties Of Lead Boro-Tellurite Glasses Doped With Europium Trioxide For Possible Optical Switching Applications, G. V. Jagadeesha Gowda, G. V. Ashok Reddy, Bheemaiah Eraiah, Chinnappa Reddy Devaraja

Journal of Metals, Materials and Minerals

This manuscript intends to the structural modifications, and physical and optical properties of a set of heavy metal alkali boro-tellurite glasses doped with Eu2O3. These glasses were produced by a conservative melt-quenching method. The existence of non-crystalline properties in the glasses was ascertained by X-ray diffraction analysis. The structural modifications were noticed by MAS-NMR spectroscopic investigation. Physical properties such as density, molar volume, oxygen packing density, average boron-boron separation, interionic distance, and polaron radius have been calculated by a suitable approach. The optical absorption studies were made through UV-visible absorption spectroscopy in the 350 nm to 800 nm wavelength range. …

Go to article

The Influence Of Water-Cement Ratios And Alumino-Silicate Based Accelerator On The Properties Of Fiber-Reinforced Cement Composites, Parinya Chakartnarodom, Passakorn Sonprasarn, Sureerat Polsilapa, Nuntaporn Kongkajun, Edward Laitila, Wichit Prakaypan Jan 2023

The Influence Of Water-Cement Ratios And Alumino-Silicate Based Accelerator On The Properties Of Fiber-Reinforced Cement Composites, Parinya Chakartnarodom, Passakorn Sonprasarn, Sureerat Polsilapa, Nuntaporn Kongkajun, Edward Laitila, Wichit Prakaypan

Journal of Metals, Materials and Minerals

Due to more strict environmental protection and greenhouse gas reduction, it is very important for all industries to appropriately manage their energy consumption.  Fiber- reinforced cement composites are the popular building materials which consume enormous energy to intensify its chemical reaction during the autoclave steam curing process. Utilization of chemical admixture to replace the conventional energy-driven autoclave steam curing process will support the fiber- reinforced cement composites industry to develop sustainable building materials.  In this research, typical and mechanical properties of the air-cured fiber- reinforced cement composites incorporated with alumino-silicate based accelerator were investigated.  The results show an excellent correlation …

Go to article

Synthesis, Characterization, And Application Of Zif-8 For Removal Of Cd, Ni, And Pb Ions From Aqueous Solutions: Optimization Of The Process By Response Surface Methodology (Rsm) Based On Central Composite Design (Ccd) Technique, Amir Khosravi, Maryam Randjbar, Razieh Habibpour Jan 2023

Synthesis, Characterization, And Application Of Zif-8 For Removal Of Cd, Ni, And Pb Ions From Aqueous Solutions: Optimization Of The Process By Response Surface Methodology (Rsm) Based On Central Composite Design (Ccd) Technique, Amir Khosravi, Maryam Randjbar, Razieh Habibpour

Journal of Metals, Materials and Minerals

A Zeolitic imidazolate framework-8 (ZIF-8) was synthesized by the solvothermal method of zinc nitrate hexahydrate and 2-methylimidazole in DMF to remove Cd(II), Ni(II), and Pb(II) ions from aqueous solutions. The synthesized ZIF-8 was distinguished by XRD, FT-IR, BET, SEM, EDX, TEM methods. Several significant variables were optimized with response surface methodology (RSM) to obtain the highest removal of metal ions. According to the achieved results, the aqueous solution pH values of 6.5, 6.5, and 6.0, ZIF-8 dosages of 0.05, 0.06, and 0.05 g⸳L-1, and metal ions initial concentrations of 50, 60, and 60 mg⸳L-1 were chosen as the optimum amount …

Go to article

A Study Of The Electrical And Optical Properties Of Azo Thin Film By Controlling Pulse Frequency Of Hipims, Peerapong Nuchuay, Chinoros Laongwan, Wimol Promcham, Pacharamon Somboonsaksri, Sukon Kalasung, Chanunthorn Chananonnawathorn, Pitak Eiamchai, Viyapol Patthanasettakul, Chamnan Promjantuk, Kittikhun Seawsakul, Noppadon Nuntawong, Mati Horprathumb, Saksorn Limwichean Jan 2023

A Study Of The Electrical And Optical Properties Of Azo Thin Film By Controlling Pulse Frequency Of Hipims, Peerapong Nuchuay, Chinoros Laongwan, Wimol Promcham, Pacharamon Somboonsaksri, Sukon Kalasung, Chanunthorn Chananonnawathorn, Pitak Eiamchai, Viyapol Patthanasettakul, Chamnan Promjantuk, Kittikhun Seawsakul, Noppadon Nuntawong, Mati Horprathumb, Saksorn Limwichean

Journal of Metals, Materials and Minerals

The transparent conductive oxide (TCO) which is AZO thin film was prepared by controlling pulse frequency at 100 Hz to 900 Hz using high-power impulse magnetron sputtering (HiPIMS). All samples were deposited on silicon (100) and glass slide substrates which the thickness was kept constant at 400 nm. The surface morphology was investigated by field-emission scanning electron microscope (FE-SEM), crystallinity by Grazing Incidence X-ray Diffraction (GI-XRD), optical transparency by UV-Vis-NIR spectrophotometry, and electrical properties using Hall effect instrument. It was found that the AZO films exhibited dense columnar structure. The GI-XRD patterns of AZO films demonstrated the crystal growth direction …

Go to article

Green Production Of Simultaneous Coloration And Functional Finishing On Hemp Textiles Through Dyeing With Diospyros Mollis Griff. Extract, Pisutsaran Chitichotpanya, Nattaya Vuthiganond, Pimnara Chutasen, Thitirat Inprasit Jan 2023

Green Production Of Simultaneous Coloration And Functional Finishing On Hemp Textiles Through Dyeing With Diospyros Mollis Griff. Extract, Pisutsaran Chitichotpanya, Nattaya Vuthiganond, Pimnara Chutasen, Thitirat Inprasit

Journal of Metals, Materials and Minerals

Nowadays, there is a rise in the production of eco-friendly, value-added textiles from natural substances. Some plant extracts can simultaneously dye and impart functionalities to textile fibers. The main goal of this study was the development of anti-UV and antibacterial hemp fabrics through dyeing with aqueous extracts obtained from Diospyros mollis Griff. Fruits without using any hazardous chemicals. Response surface methodology (RSM) was used to optimize the dyeing process and evaluate parameter interactions. The optimal pH, dyeing concentration, dyeing temperature, and mordant concentration were 4, 200 %owf, 92°C, and 5.4 %owf, respectively. The dyed fabrics were evaluated for coloration properties …

Go to article

Ballistic Performance Of Composite Armor Impacted By 7.62 Mm Armor Projectile, Apichart Jinnapat, Patchayapon Doungkom, Kritkeaw Somton, Kannigar Dateraksa Jan 2023

Ballistic Performance Of Composite Armor Impacted By 7.62 Mm Armor Projectile, Apichart Jinnapat, Patchayapon Doungkom, Kritkeaw Somton, Kannigar Dateraksa

Journal of Metals, Materials and Minerals

The purpose of this study is to investigate the effectiveness of composite armor against 7.62 mm ballistic threats. A sandwich panel construction consisting of a 96% alumina ceramic strike face, an annealed aluminum alloy 7075 cubic lattice sandwich panel, and a thin aluminum backing plate were used to create hard armor. The ballistic test based on NIJ standard level III was performed using 7.62 mm × 51 mm NATO projectiles at an impact velocity of 847 ± 9.1 m∙s-1. The influences of the alumina strike face panel with thicknesses of 7, 10, and 14 mm on the ballistic performance were …

Go to article

Feasibility Study Of Coconut Shell Biochar Production Using Community-Scale Biochar Kiln, Uraiwan Pongsa, Pasuree Lumsakul, Orajit Jamesang, Prasan Saengkhiao, Phoometh Sangrayub, Wichai Pumchan Jan 2023

Feasibility Study Of Coconut Shell Biochar Production Using Community-Scale Biochar Kiln, Uraiwan Pongsa, Pasuree Lumsakul, Orajit Jamesang, Prasan Saengkhiao, Phoometh Sangrayub, Wichai Pumchan

Journal of Metals, Materials and Minerals

The enormous coconut shell waste from local farmers and manufacturers has caused negative environmental and economic impacts in Thailand. A low-cost, small-scale pyrolysis kiln comprised of a cylindrical tank, gas circulating pipes, a kiln stand, and a manual drum lever was constructed and used to produce biochar from coconut shells in this study. The air intake and holding times for the biochar production process were varied. The biochar yield was 30.67% to 36.22%, or 4.6 kg to 5.4 kg per day per unit. The biochar porosity and fixed carbon content increased as the air intake and holding times were increased. …

Go to article

Physico-Chemical Characterization Of Snail Shells Powder Prepared By Mechanochemical Processes And Thermal Treatment, Mostapha Karaoui, Rachid Hsissou, Mohammed Alami, Mohammed Assouag Jan 2023

Physico-Chemical Characterization Of Snail Shells Powder Prepared By Mechanochemical Processes And Thermal Treatment, Mostapha Karaoui, Rachid Hsissou, Mohammed Alami, Mohammed Assouag

Journal of Metals, Materials and Minerals

Natural particles are the most abundant resources exist in nature. Bio-sources of CaCO3 particles have attracted the attention of researchers for multiple cosmetics, industrial, and medical applications. This work investigates the structural evolution of CaCO3 containing in snail shell particles prepared by a mechanochemical process using methods of characterization as well as Differential scanning calorimeter (DSC), Thermogravimetric analysis (TGA), X-ray diffraction (X-RD), Fourier transformation infra-red (FT-IR), and Scanning microscopy equipped with Energy-dispersive X-Ray spectroscopy (SEM-EDXS). The result obtained from the above analysis indicates that SSP calcined between 200℃ to 400℃ undergoes an elimination of water molecules, followed by a phase …

Go to article

Recycling Of Iron Oxide Waste By Carbothermic Reduction To Utilize In Fdm 3d Printing Materials, Korbkaroon Doungkeaw, Peeraphat Suttipong, Phachai Kungwankrai, Suksan Muengto, Boonlom Thavornyutikarn, Jennarong Tungtrongpairoj Jan 2023

Recycling Of Iron Oxide Waste By Carbothermic Reduction To Utilize In Fdm 3d Printing Materials, Korbkaroon Doungkeaw, Peeraphat Suttipong, Phachai Kungwankrai, Suksan Muengto, Boonlom Thavornyutikarn, Jennarong Tungtrongpairoj

Journal of Metals, Materials and Minerals

Iron oxide scale generally forms on low-carbon steel surfaces during the hot rolling processes and produces as solid waste more than 100 thousand tons per year. The utilization of the iron oxide scale is one possible way to reduce the production cost for steel plants and promote environmental protection. Acrylonitrile-Butadiene-Styrol-Copolymer (ABS) is widely used as engineering plastic for automotive parts because of its high strength and wear resistance. The recycling of iron oxide waste as reinforcement particles for enhancing the tensile strength of ABS composite was studied. The iron oxides were recycled by carbon powder at a high temperature between …

Go to article

Eddy Current Evaluation For Thickness Loss Estimation Of Aluminum Alloys Used In Aircraft Structures, Seekharin Komonhirun, Sujittra Tangprakob, Sorawit Chanaphan, Awika Jaroensri, Thanasak Nilsonthi, Thammaporn Thublaor Jan 2023

Eddy Current Evaluation For Thickness Loss Estimation Of Aluminum Alloys Used In Aircraft Structures, Seekharin Komonhirun, Sujittra Tangprakob, Sorawit Chanaphan, Awika Jaroensri, Thanasak Nilsonthi, Thammaporn Thublaor

Journal of Metals, Materials and Minerals

Aluminum alloys are commonly used in the aircraft industry but it tends to corrode and needs to be inspected properly. Eddy current testing is the widely used non-destructive testing (NDT) for aircraft metals. This research studied estimating the thickness loss due to corrosion in an aircraft aluminum sheet metal. The Al1100, Al2024, and Al7075 were 2 mm thick. Aluminum sheet metals were used to create artificial damage in hydrochloric acid. The thickness loss due to corrosion was inspected with eddy current testing (ET) and compared with the measurement from the coordinate measurement machine (CMM). The results showed that the thickness …

Go to article

Fabrication And Characterizations Of High Density Si3 N4 - Zro2 Ceramics, Kamol Traipanya, Thanakorn Wasanapiarnpong, Charusporn Mongkolkachit Jan 2023

Fabrication And Characterizations Of High Density Si3 N4 - Zro2 Ceramics, Kamol Traipanya, Thanakorn Wasanapiarnpong, Charusporn Mongkolkachit

Journal of Metals, Materials and Minerals

Silicon nitride and zirconia were mixed with SiO2, MgO, Y2O3 as sintering additives and pressureless sintered at 1650℃ in N2 atmosphere for 2 h. The XRD results showed a-Si3N4 was partially transformed to b-Si3N4 with 3:3:5 weight ratio of SiO2 : MgO : Y2O3. However, at 5 wt% of ZrO2 addition promoted phase transformation of a-Si3N4 to b-Si3N4 while 35 wt% of ZrO2 completely transformed to b-Si3N4 phase. Si3N4 has a lower density than ZrO2, bulk density of samples increases in correlation with the amount of ZrO2. Because there was no difference in hardness and flexural strength between sintered Si3N4 …

Go to article

Enhancing The Color Shade And Depth Of Linen Fabrics Dyed With Caesalpinia Sappan L. Wood Extract Using Metallic Salt Mordants, Thanika Hutakamol, Penwisa Pisitsak, Sarida Thongmee, Sinuntorn Srijanand, Thankamol Somrus Jan 2023

Enhancing The Color Shade And Depth Of Linen Fabrics Dyed With Caesalpinia Sappan L. Wood Extract Using Metallic Salt Mordants, Thanika Hutakamol, Penwisa Pisitsak, Sarida Thongmee, Sinuntorn Srijanand, Thankamol Somrus

Journal of Metals, Materials and Minerals

This study demonstrated natural dyeing of linen with a dye extracted from sappan wood (Caesalpinia sappan L.). Four metallic salt mordants, namely (NH4)2Fe(SO4)2, CuSO4, SnCl2, and AlK(SO4)2, referred to as Fe, Cu, Sn, and Al, respectively, were used to improve the dyeing properties. The influences of the pH, dye concentration, mordant type and concentration, and mordanting technique on the dyeing properties were investigated. Dyeing without mordants resulted in a reddish-brown fabric; however, different mordants produced a variety of color shades. In general, the mordant containing Fe yielded the highest color strength, generating a dark gray color very close to black. …

Go to article

Enhanced Raman Spectroscopy Analysis For Contamination Detection On Microelectronic Devices Using Gold Nanoclusters Grown By Dc Magnetron Sputtering, Charin Seesomdee, Prompong Pienpinijtham, Pornchai Rakpongsiri, Sukkaneste Tungasmita Jan 2023

Enhanced Raman Spectroscopy Analysis For Contamination Detection On Microelectronic Devices Using Gold Nanoclusters Grown By Dc Magnetron Sputtering, Charin Seesomdee, Prompong Pienpinijtham, Pornchai Rakpongsiri, Sukkaneste Tungasmita

Journal of Metals, Materials and Minerals

Surface-enhanced Raman spectroscopy (SERS) is one of the most powerful analytical techniques for the identification of molecules in microelectronics industry for failure analysis protocols.  Surface-enhanced Raman spectroscopy (SERS) is one of the most powerful analytical techniques for the identification of molecules in the microelectronics industry for failure analysis protocols. In this work, dry-processed gold nanoclusters were prepared by magnetron sputtering deposition to promote the enhancement of the Raman signal from selected common polymers found in the hard disk drive as surface contamination. The optimized sputtering conditions were applied for SERS on poly-carbonate (PC), polyethylene terephthalate (PET), polypropylene (PP), and high-density …

Go to article

Cellulose-Based Fabrics Triboelectric Nanogenerator: Effect Of Fabric Microstructure On Its Electrical Output, Rawiwan Khwanming, Satana Pongampai, Naratip Vittayakorn, Thitirat Charoonsuk Jan 2023

Cellulose-Based Fabrics Triboelectric Nanogenerator: Effect Of Fabric Microstructure On Its Electrical Output, Rawiwan Khwanming, Satana Pongampai, Naratip Vittayakorn, Thitirat Charoonsuk

Journal of Metals, Materials and Minerals

At present, fabric-based triboelectric nanogenerator (TENG) has been paid attention and developed for self-power generation systems with wearability for E-textiles, especially cotton. However, there are many commercial cellulose-based fabrics with different fiber characteristics and fabric structures that gain possibility to effect on TENG performance and has been underreported. This work presents the fabrication of the textile TENG by using four types of commercial cellulose-based fabrics as friction layer and compare the electrical output efficiency relating their molecular structure, fabric structure and surface morphology characteristics. As shown by the electrical output, though all fabrics can generate electricity for TENG device, nevertheless, …

Go to article

Biomass-Based Nitrogen-Doped Carbon/Polyaniline Composite As Electrode Material For Supercapacitor Devices, Krittaprot Thongkam, Nattawut Chaiyut, Manop Panapoy, Bussarin Ksapabutr Jan 2023

Biomass-Based Nitrogen-Doped Carbon/Polyaniline Composite As Electrode Material For Supercapacitor Devices, Krittaprot Thongkam, Nattawut Chaiyut, Manop Panapoy, Bussarin Ksapabutr

Journal of Metals, Materials and Minerals

Nitrogen-doped activated carbon (N-AC) was prepared from water hyacinth stems for loading polyaniline (PANI) by in-situ polymerization to synthesize N-AC/PANI composites for utilization as electrode materials in supercapacitors. Using potassium hydroxide as the activating agent, stems of water hyacinth were carbonized and activated in a single step to produce N-AC powders. Raman, FTIR, SEM, BET, TGA, and XPS techniques were used to characterize the resultant N-AC materials. The findings revealed that the N-AC materials had a porous structure and high specific surface area. Neat PANI was synthesized by varying the reaction time to 8, 16, and 24 h. During the …

Go to article

Influence Of Water Content On Structural And Electrochromic Properties Of Tio2 Nanotube Prepared By Anodization, Chantana Aiempanakit, Pathomporn Junbang, Watchara Suphap, Kamon Aiempanakit Jan 2023

Influence Of Water Content On Structural And Electrochromic Properties Of Tio2 Nanotube Prepared By Anodization, Chantana Aiempanakit, Pathomporn Junbang, Watchara Suphap, Kamon Aiempanakit

Journal of Metals, Materials and Minerals

TiO2 nanotubes (TNTs) and bamboo-type TNTs structure films were synthesized via anodization from sputtered titanium (Ti) films on indium tin oxide (ITO) glass. Herein, the anodization process was adjusted electrolyte with different amounts of deionized water and ethylene glycol. The optical and structural properties of all films before and after annealing were investigated, which affected electrochromic application. The increasing deionized water content in electrolytes resulted in an increase in the average diameter and a decrease in the average length of TNTs. Furthermore, the bamboo-type TNTs structure was produced at the deionized water volume condition of 3 vol%. The crystallite size …

Go to article

Color Shading, Color Fastness, Antibacterial And Ultraviolet Protection Properties Of Silk Fabric Colored By Silver Nanoparticles, Siriwan Kittinaovarat, Pornchiwin Banjong, Pornapa Sujaridworakun Jan 2023

Color Shading, Color Fastness, Antibacterial And Ultraviolet Protection Properties Of Silk Fabric Colored By Silver Nanoparticles, Siriwan Kittinaovarat, Pornchiwin Banjong, Pornapa Sujaridworakun

Journal of Metals, Materials and Minerals

This research studied the effects of different factors used in an in-situ method for forming colored silver nanoparticles (AgNP) on the properties of silk fabric; namely color shading, color strength, relative unlevelness index, color fastness to washing, antibacterial and UV shielding properties. In addition, improvement with an acrylic binder on color fastness to washing and antibacterial property after 20 cycles of washing of AgNP-treated silk fabric were also investigated. It was found that the optimum condition for treatment by the in-situ method was 2.0% owf of silver nitrate (AgNO3) solution, AgNO3 to trisodium citrate ratio at 1:3 (%w/w), exhaustion temperature …

Go to article

Effect Of Trisilanol Isobutyl Polyhedral Oligomeric Silsesquioxane (Tposs) In Recycled Pet (Rpet) And Polypropylene Based Compound: Investigation On Mechanical Properties, Rujira Phumma, Chutima Vanichvattanadecha, Sarute Ummartyotin Jan 2023

Effect Of Trisilanol Isobutyl Polyhedral Oligomeric Silsesquioxane (Tposs) In Recycled Pet (Rpet) And Polypropylene Based Compound: Investigation On Mechanical Properties, Rujira Phumma, Chutima Vanichvattanadecha, Sarute Ummartyotin

Journal of Metals, Materials and Minerals

Recycled polyethylene terephthalate is successfully prepared. This project is involved for “Circular economy” policy. It is successfully prepared into powder form by nano-grinder technique. 10 phr of PP-g-MA and 1 phr to 5 phr of TPOSS are added for compatibilizer and mechanical properties enhancement, respectively. PP-g-MA can form the chemical linkage of the anhydride groups with the polyamide end groups. 20 wt% of recycled polyethylene terephthalate powder and polypropylene based compound is successfully fabricated by melt mixing. Then, it is fabricated by melting spinning technique. Fourier transform infrared presents Si-O-Si linkage in binary blend compound. X-ray diffraction pattern reports that …

Go to article

Preparation Of Ga2o3-Modified Sulfated Zirconia Mesopore And Its Application On Cellobiose Hydrolysis, Addy Rachmat, Rizki Dwifahmi, Nova Yuliasari, Ady Mara, Desnelli Desnelli Jan 2023

Preparation Of Ga2o3-Modified Sulfated Zirconia Mesopore And Its Application On Cellobiose Hydrolysis, Addy Rachmat, Rizki Dwifahmi, Nova Yuliasari, Ady Mara, Desnelli Desnelli

Journal of Metals, Materials and Minerals

Heterogeneous catalyst plays vital role in biomass processing due to slow rate of biological and naturally pathway processes. Solid acid sulfated zirconia (SZ) is a promising catalyst with properties that can be tuned up. Sulfated zirconia was successfully modified by 2%, 5% and 10% (wt.) Ga2O3 (xGa-SZ; x = 2, 5 and 10) via template-assisted sol-gel method. The catalysts were characterized through various method (XRD, SEM-EDS and Gas Sorption analysis) and applied on hydrolysis of cellobiose, a model compound of cellulose. Diffraction pattern showed xGa-SZ formed completely tetragonal phase whereas un-promoted SZ contains mixed phase of monoclinic and tetragonal. Acidity …

Go to article

The Changes In Microstructural Features And Physical Properties Of Ceramic Matrix Composite Bonding Tools Under Ultrasonic Service, Apirat Theerapapvisetpong, Karn Serivalsatit, Wuttichai Reainthippayasakul, Wantanee Buggakupta Jan 2023

The Changes In Microstructural Features And Physical Properties Of Ceramic Matrix Composite Bonding Tools Under Ultrasonic Service, Apirat Theerapapvisetpong, Karn Serivalsatit, Wuttichai Reainthippayasakul, Wantanee Buggakupta

Journal of Metals, Materials and Minerals

Tape automated bonding (TAB) process plays a key role in the production of disk drives, microchips and other microelectronics components. Such tools should sustain their structures and properties throughout ultrasonic operation and are expected to last until reaching the targeted numbers of TAB cycles. This project aims to evaluate the changes in microstructures and physical properties of the bonding tools under ultrasonic service. Three commercial waffle-type tools from different suppliers were focused, namely Tool A, Tool B and Tool C. They provide different levels of bonding efficiency up to 50k cycles under relatively similar ultrasonic practice. Non-destructive and destructive testing …

Go to article

Synthesis Of Sic Nanowires On Biochar Surfaces By A Simple Direct Method, Wasana Khongwong, Chumphol Busabok, Piyalak Ngernchuklin Jan 2023

Synthesis Of Sic Nanowires On Biochar Surfaces By A Simple Direct Method, Wasana Khongwong, Chumphol Busabok, Piyalak Ngernchuklin

Journal of Metals, Materials and Minerals

Demand for air filters is crucially required due to PM 2.5. So, SiC nanowire networks are directly grown on biochar surfaces that serve strength and filtering purposes. The nanowires were prepared by spraying silicon powder on Lesser bulrush and Grey sedge biochars which acted as carbon sources and heating up to 1300℃ to 1500℃ for 1 h in Ar atmosphere. As a result, silicon powder evaporated and diffused on biochar surfaces. Meanwhile, CO vapor was generated from biochar reacted with O2 in the chamber. The evaporated silicon reacted with both C(s) and CO(g) to form cubic SiC nanowires. At the …

Go to article

Growth Of Proton Conducting Strontium Cerate Composites, C. K. Shilpa, S. V. Jasira, V. P. Veena, K. M. Nissamudeen Jan 2023

Growth Of Proton Conducting Strontium Cerate Composites, C. K. Shilpa, S. V. Jasira, V. P. Veena, K. M. Nissamudeen

Journal of Metals, Materials and Minerals

The increased population and modern way of life have greatly depleted the effectiveness of traditional energy production methods. There is a strong demand for environmentally friendly and renewable alternatives to replace the old systems. Sustainable energy production systems have emerged as a vital replacement for the conventional use of fossil fuels. Among these, solid oxide fuel cells (SOFCs) play a significant role. Recently, researchers have developed electrolyte components for SOFCs using proton-conducting perovskites with excellent conductivity. This critical assessment presents a yearly overview of innovative strategies for utilizing doped strontium cerate perovskites in energy production systems, a novel approach. The …

Go to article

Review Of Materials, Functional Components, Fabrication Technologies And Assembling Characteristics For Polymer Electrolyte Membrane Fuel Cells (Pemfcs) – An Update, Arun Daya, Arputharaj Samson Nesaraj Jan 2023

Review Of Materials, Functional Components, Fabrication Technologies And Assembling Characteristics For Polymer Electrolyte Membrane Fuel Cells (Pemfcs) – An Update, Arun Daya, Arputharaj Samson Nesaraj

Journal of Metals, Materials and Minerals

Fuel cells use electrochemical processes to transform the chemical energy of a fuel into electrical energy, which is a key enabler for the shift to an H2-based economy. Because of their high energy conversion efficiency and low pollution emissions, fuel cells with polymer electrolyte membranes (PEMFCs) are regarded as being in frontline of commercialization for the transportation and automotive industries. However, there are two major hurdles to their future commercialization: cost and durability, which promote basic study and development of their components. In this article, we reviewed the materials, functional components, fabrication technologies and assembling characteristics related to PEMFCs. Platinum's …

Go to article

Structure And Chemical Durability Improvement Of Alkali Silicate Glass By Zirconium Dioxide And Erbium Oxide Addition, Ativit Denprawat, Kittipong Sinwanasarp, Pinit Kidkhunthod, Nattapol Laorodphan, Worapong Thiemsorn Jan 2023

Structure And Chemical Durability Improvement Of Alkali Silicate Glass By Zirconium Dioxide And Erbium Oxide Addition, Ativit Denprawat, Kittipong Sinwanasarp, Pinit Kidkhunthod, Nattapol Laorodphan, Worapong Thiemsorn

Journal of Metals, Materials and Minerals

Glass structure tailoring of alkali silicate glasses by addition of ZrO2 and Er2O3 is found to enhance the chemical durability of glasses. ZrO2 (x ranged between 5 mol% to 15 mol%) and Er2O3 (y ranged between 0.5 mol% to 1.5 mol%) were used to replace SiO2 and Na2O, respectively, in the glasses with the nominal composition of 10Li2O-(15-y)Na2O-10CaO-(65-x)SiO2-xZrO2-y Er2O3. The samples were prepared by conventional melt quenching technique. The structures of produced glasses were examined by X-ray absorption spectroscopy (XAS) and Raman spectroscopy. XAS spectra demonstrated that the oxidation numbers of Zr and Er ions were +4 and +3, respectively. …

Go to article

Quantum-Based First-Principles Study Of Gas Molecules (O2 , Co2 , No2 ) Interaction On Monolayer Germanene, Arief Hermanto, Harmon Prayogi, Ari Dwi Nugraheni, Juliasih Partini, Sholihun Sholihun Jan 2023

Quantum-Based First-Principles Study Of Gas Molecules (O2 , Co2 , No2 ) Interaction On Monolayer Germanene, Arief Hermanto, Harmon Prayogi, Ari Dwi Nugraheni, Juliasih Partini, Sholihun Sholihun

Journal of Metals, Materials and Minerals

We perform calculations of the adsorption energy of O2, CO2, and NO2 molecules on germanene by using the density functional theory (DFT). We find two favorable configurations for O2, the U-site and V-site configurations with similar adsorption energies of -4.10 and -4.32 eV. As for NO2, we find two favorable configurations, the T-site and DB-site configurations. The T-site configuration is 0.98 eV more stable than the IB-site one, and both configurations are chemically adsorbed by germanene. On the contrary for CO2, we find a T-site configuration with adsorption energy of 0.42 eV and the configuration physically adsorbed by germanene.

Go to article

Synthesis And Modification Of Nickel Hydroxide Particle Synthesized By Self-Assembly And Electron Beam Irradiation Technique For Photocatalyst Activity, Narisara Saechin, Sumitra Sripho, Thitirat Rattanawongwiboon, Sakchai Laksee, Pattra Lertsarawut, Wilasinee Kingkam, Sarute Ummartyotin Jan 2023

Synthesis And Modification Of Nickel Hydroxide Particle Synthesized By Self-Assembly And Electron Beam Irradiation Technique For Photocatalyst Activity, Narisara Saechin, Sumitra Sripho, Thitirat Rattanawongwiboon, Sakchai Laksee, Pattra Lertsarawut, Wilasinee Kingkam, Sarute Ummartyotin

Journal of Metals, Materials and Minerals

The purpose of this work is to study the methyl orange removal of Ni(OH)2 nanoparticles. The photo-catalyst activity is investigated based on UV lamp of 18 watt. Ni(OH)2 is synthesized by a self-assembly process and then exposed to electron beam radiation at 10 MeV energy with various doses ranging from 50 kGy to 500 kGy. The properties of Ni(OH)2 nanoparticles are then evaluated. No significant change of functional group and percent of crystallinity are observed. The morphology is uniformly presented as a plate-like. The specific surface area, pore size and pore volume are reduced. Point of zero charge confirmed that …

Go to article

First Prev Next Last