Engineering Commons^™

Class-F Power Amplifier With Maximized Pae, Kai Shing Tsang

Master's Theses

Due to the rapid development of telecommunication devices, operating speeds are getting faster and more power is being consumed by those devices. Therefore, there is a big concern on how to prolong the battery life in order to fit consumers’ needs. Power amplifiers (PA) at the front end of wireless equipment have drawn a big concern from engineers because of their large power consumption in the system. There is a lot research conducted on PA solutions for improving power-added efficiency (PAE) of amplifiers. PAE is a figure of merit representing how efficient the PA converts DC power to RF power. …

Picasso Interface For Horizon Simulation Framework, Brian E. Kirkpatrick

Master's Theses

The Horizon Simulation Framework, or HSF, is a modeling and simulation framework compiled from C/C++ source code into a command line program. Picasso is an interface designed to control the input files to Horizon by providing visual tools to create and manipulate the XML files used to define an HSF system of assets, their environment, and other simulation parameters. Picasso also supports the visualization of Horizon output in several different forms, and import mechanics from online space object catalogues.

Modular Electronic Load, Jason March

Electrical Engineering

This project entails the design and development of a modular electronic load. The cost and simplicity of the design are considered such that it can be reproduced in-house to replace whenever possible resistor box for load testing of any analog circuits but more specifically power electronic circuits.

The design process as well as the hardware development is explained in details in this report. Results from hardware testing are also provided.

Integration Of Microfluidics With Surface Plasmon Resonance, Scott B. Fratzke

Master's Theses

This thesis successfully integrates laminate microfluidic devices with an analytic Surface Plasmon Resonance (SPR) instrument. Integration was accomplished at low-cost using materials such as polydimethylsiloxane (PDMS), Poly(methyl methacrylate) (PMMA), Tygon tubing, and a 3-way stopcock. The main components of this thesis are the design and fabrication of the low-cost, in-house fluidics that can integrate with upstream microfluidics and the validation of the in-house fluidics using the Biosensing Instruments BI-2000 SPR instrument. The low-cost fluidics was designed and fabricated “in-house” using a novel investment casting technique that required the use of laser cutting technology to make a master cast, and candle …

Enhanced Cal Poly Super System Simulink Model, Matthew Ogden Mcfarland

Master's Theses

The Cal Poly Sustainable Power for Electrical Resources (SuPER) project is a solar power DC distribution system designed to autonomously manage and supply the energy needs of a single family off-the-grid home. The following thesis describes the improvement and re-design of a MATLAB Simulink model for the Cal Poly SuPER system. This model includes a photovoltaic (PV) array, a lead-acid gel battery with temperature effects, a wind turbine model, a re-designed DC-DC converter, a DC microgrid, and multiple loads. This thesis will also include several control algorithms such as a temperature controlled thermoelectric (T.E.) cooler, intelligent load switching, and an …

Implementation Of A Conrad Probe On A Boundary Layer Measurement System, Charles Rocky Ulk

Master's Theses

This thesis presents the design, calibration, and performance evaluation of a type of two-hole pressure probe anemometer known as a Conrad probe, as well as its subsequent implementation on an autonomous, compact boundary layer measurement device and its first application for subsonic in-flight measurements of a swept wing boundary layer. Calibration of the Conrad probe was accomplished using two calibration functions and a non-nulling method for resolving in-plane flow velocity direction and magnitude over a range of ±30 degrees. This approach to calibration and application offered the advantages of rapid data acquisition with lower energy consumption than alternative methods for …

Asynchronous Mips Processors: Educational Simulations, Robert L. Webb

Master's Theses

The system clock has been omnipresent in most mainstream chip designs. While simplifying many design problems the clock has caused the problems of clock skew, high power consumption, electromagnetic interference, and worst-case performance. In recent years, as the timing constraints of synchronous designs have been squeezed ever tighter, the efficiencies of asynchronous designs have become more attractive. By removing the clock, these issues can be mitigated. How- ever, asynchronous designs are generally more complex and difficult to debug. In this paper I discuss the advantages of asynchronous processors and the specifics of some asynchronous designs, outline the roadblocks to asynchronous …

Immunohistochemical Mapping Of Hypoxia In Ischemic Mouse Hindlimb Skeletal Muscle, Emily Deckert

Biomedical Engineering

The study of blood vessel growth and remodeling is a complex endeavor. Hypoxia, the lack of oxygen in a tissue, is known to stimulate angiogenesis (the growth of new blood vessels), and have little effect on arteriogenesis (the enlargement of existing blood vessels). However, the role of hypoxia in vessel function is unknown, but may be determined using the results and methods developed in this experiment.

Supplied by the bloodstream, oxygen is required by all cells and tissues to remain healthy. If the bloodstream supplying a certain tissue with blood is disrupted, the tissue becomes ischemic, often leading to hypoxia. …

St. Jude Medical: An Object-Oriented Software Architecture For Embedded And Real-Time Medical Devices, Atila Amiri

Master's Theses

Medical devices used for surgical or therapeutic purposes require a high degree of safety and effectiveness. Software is critical component of many such medical devices. The software architecture of a system defines organizational structure and the runtime characteristic of the application used to control the operation of the system and provides a set of frameworks that are used to develop that. As such, the design of software architecture is a critical element in achieving the intended functionality, performance, and safety requirements of a medical device. This architecture uses object-oriented design techniques, which model the underlying system as a set of …

St. Jude Medical: Enhanced Mics (Emics), Devanshi Shah

Master's Theses

Heart disease is one of the most prevalent diseases in the world. The survival chances for patients with ventricular fibrillation/ventricular tachycardia reduces significantly as time passes without treatment and even after getting timely treatment recurring episode are common. These patients can benefit from an Implantable Cardioverter Defibrillator (ICD) which can monitor heart rhythm and provide immediate treatment. Due to the ever changing physical conditions and disease progression, the ICD needs to collect diagnostic data as well as support programming by the physician. The ICD uses inductive telemetry and radio-frequency telemetry for the communication with the external devices such as a …

Tribological Comparison Of Traditional And Advanced Firearm Coatings, Greg Boban

Master's Theses

The objective of this project is to find which type of coating has the best performance characteristics for finishing firearms. This is accomplished by measuring and comparing several performance characteristics, such as: adhesion, hardness, wear resistance, friction control, and corrosion resistance. Appearance is not a factor since any exterior coating that is flashy can be subdued or camouflaged with special purpose paints, which have proven durable enough for such purposes. Cost will not be a limiting factor for this experiment, but will be discussed in the conclusion as a secondary concern. This data will be used to identify the best …

Implementation Of Physiologic Pressure Conditions In A Blood Vessel Mimic Bioreactor System, Kevin Mark Okarski

Master's Theses

ABSTRACT

Implementation of Physiologic Pressure Conditions in a Blood Vessel Mimic Bioreactor System

Kevin Mark Okarski

Tissue engineering has traditionally been pursued as a therapeutic science intended for restoring or replacing diseased or damaged biologic tissues or organs. Cal Poly’s Blood Vessel Mimic Laboratory is developing a novel application of tissue engineering as a tool for the preclinical evaluation of intravascular devices. The blood vessel mimic (BVM) system has been previously used to assess the tissue response to deployed stents, but under non-physiologic conditions. Since then, efforts have been made to improve the vessel and bioreactor’s ability to emulate in …

Strawberries: Effects Of Modifying Irrigation Methods For Transplant Establishment 2009-2010, Stuart Styles

BioResource and Agricultural Engineering

The purpose of the project is to develop an analysis of the current irrigation practices of the strawberry growers on the Central Coast of California. The primary research evaluation is during the establishment of transplants where sprinklers are used even though drip irrigation is available. This project has targeted the impacts of salinity on the young strawberry transplants.

The specific objectives of the project are to: (1) Set up a research areas and control plots on a demonstration scale, (2) determine the key factors that affect the problems in early growth of transplanted strawberries, (3) determine relationships between the use …

Ant Colony Optimization Algorithm For Robot Path Planning, Michael Brand, Michael Masuda, Nicole Wehner, Xiao-Hua Yu

Electrical Engineering

Path planning is an essential task for the navigation and motion control of autonomous robot manipulators. This NP-complete problem is difficult to solve, especially in a dynamic environment where the optimal path needs to be rerouted in real-time when a new obstacle appears. The ACO (Ant Colony Optimization) algorithm is an optimization technique based on swarm intelligence. This paper investigates the application of ACO to robot path planning in a dynamic environment. Two different pheromone re-initialization schemes are compared and computer simulation results are presented.

Bioinformatics Data Mining Using Artificial Immune Systems And Neural Networks, Shane Dixon, Xiao-Hua Yu

Electrical Engineering

Bioinformatics is a data-intensive field of research and development. The purpose of bioinformatics data mining is to discover the relationships and patterns in large databases to provide useful information for biomedical analysis and diagnosis. In this research, algorithms based on artificial immune systems (AIS) and artificial neural networks (ANN) are employed for bioinformatics data mining. Three different variations of the real-valued negative selection algorithm and a multi-layer feedforward neural network model are discussed, tested and compared via computer simulations. It is shown that the ANN model yields the best overall result while the AIS algorithm is advantageous when only the …

Testing The Test: Validity And Reliability Of Senior Exit Exam, Lizabeth Schlemer, Daniel Waldorf

Industrial and Manufacturing Engineering

A senior exit exam is considered an excellent direct measure of student learning for ABET assessment, but the usefulness of the information gathered is related to the validity and reliability of the test itself. The Industrial and Manufacturing Engineering Department at California Polytechnic State University, San Luis Obispo has used a content exam for several years. This paper will discuss test development, administration, and the role it plays in the assessment process. In addition, the test is evaluated using the standard psychometric techniques of reliability and validity. The results of the evaluation are used to refine the test. The importance …

Matlab Structural Analysis Code For String Wing Box Structure, Sean Brown

Aerospace Engineering

This report outlines the method used for analysis of a wing box structure for the experimental “stringy” wing structure often used in light RC aircraft. This code is able to find the displacement of each joint, and the stress and forces in each member of the truss structure. It also has the features of load and structure visualization, Kevlar string removal, user-defined point and distributed loading functions, and user-defined failure criteria function. This method and resulting code is meant for use in the support of the Human Powered Helicopter project being undertaken by the Aerospace and Mechanical Engineering Department at …

Analysis Of A Passive Flow Control Device Via Flow Visualization Techniques, Cheryl R. Graham, Shi (Peter) Huang

Aerospace Engineering

This report details an experiment done to verify the effectiveness of a passive flow control system on a two-dimensional bluff body, blunt trailing edge model in controlling wake dimension and Karman vortex sheds. An earlier experiment by Park, et.al.[1] performed analysis via wind tunnel pressure testing and computerized model to determine the ideal proportions of such a tab design and identify the flow properties responsible for the potential drag reduction. To obtain visual verification of the existence of these concepts, a bluff body model proportionally identical to the one used by Park, et.al., was designed and tested in a water …

Hardware Implementation Of Symbol Synchronization For Underwater Fsk, Ying Li, Xing Zhang, Bridget Benson, Ryan Kastner

Electrical Engineering

Symbol synchronization is a critical component in the design of an underwater acoustic modem. Without accurate symbol synchronization, higher bit error rates incur thus reducing the reliability and quality of service of the wireless network. This paper provides a practical description of the design choices and hardware implementation details required to build a compact and efficient symbol synchronizer suitable for a short-range, low-power underwater FSK acoustic modem. Experimental results show the design meets the timing requirements of the underwater modem and provides accurate synchronization while consuming only 0.240W power in a Spartan3 xc3s2000 FPGA.

Channel Equalization Based On Data Reuse Lms Algorithm For Shallow Water Acoustic Communication, Feng Tong, Bridget Benson, Ying Li, Ryan Kastner

Electrical Engineering

In recent years, there has been increasing interest in the design of underwater acoustic modems for marine environmental monitoring, underwater structure inspection and sea bottom resource exploitation. As underwater acoustic channels pose difficulties such as multipath, time-space selectivity, frequency dependent noise, and Doppler shifts on transmission, research on adaptive equalizers play an important role in the design of underwater modems. This paper presents a data reuse least mean square (DR-LMS) algorithm to achieve equalization performance with low computational complexity to facilitate a practical hardware implementation. Experimental results obtained in physical shallow water channels demonstrate the effectiveness of the proposed method …

Interplanetary Gravity Assisted Trajectory Optimizer (Igato), Jason Bryan

Aerospace Engineering

Interplanetary space travel is an extremely complicated endeavor that is severely limited by our current technological advancements. The amount of energy required to transport a spacecraft from one planet to the next, or even further, is extraordinary and in some cases is even impossible given our current propulsive capabilities. Due to these complications, the search for other means of exchanging energy became imperative to future space exploration missions. One particularly powerful method that was discovered, and the most commonly used one, is referred to as planetary gravity assist. In order to plan out multiple gravity assist trajectories, complex and robust …

Autonomous Control Of The Cal Poly Motion Flight Simulator, Andrew M. Anderson

Aerospace Engineering

An autonomous controller for the Cal Poly Motion Flight Simulator was developed such that the simulated Van’s RV-7 flies a standard light aircraft traffic pattern without any human pilot input. First, an autopilot was developed in Simulink to control the aircraft’s altitude, airspeed, and heading independent of each other. The performance of the autopilot has been tested to perform with a response sufficient for precise navigation. A C++ s- function was written as a mission controller that followed a pre-programmed path around a known airport. The aircraft performs a standard left 45 degree entry into the traffic pattern, lands on …

Analysis Of F-104c World's Altitude Record Flight, William J. Day

Aerospace Engineering

No abstract provided.

Design, Fabrication, And Testing Of An Automotive Turbocharger-Based Gas Turbine Engine, John Kyle Thoma, Daniel Shehan, Benjamin Naravage, Jacob Melvin

Aerospace Engineering

A fully-functioning, self-sustaining gas turbine engine was designed and built. The engine was constructed around a Holset HE351 VGT automobile turbocharger, containing compressor and turbine assemblies on a common shaft. Other components of the engine were either purchased or designed and fabricated in-house. During initial testing of the completed engine, the turbocharger, however, was found to have extensive damage to the internal oil seals, and so the project could not be completed as planned. Instead, the combustor design and fabrication was completed for stand-alone testing. The combustion chamber was designed so that the flame tube could be easily changed out …

Alterations Of The Cal Poly Supersonic Wind Tunnel To Increase Accuracy And Prove The Absence Of Shockwaves, Garrett A. Lovell, Hector A. Gonzalez

Aerospace Engineering

The calibration and improvement of the Cal Poly supersonic wind tunnel was performed in order to create a fully functional facility for supersonic testing. While investigating possible shocks present in the wind tunnel, it was discovered that the real concern was not the tunnel but the measurement systems. Both measurement systems, pitot tube and Schlieren, were evaluated and were found to be deficient. The pitot system had so much play in it that it bent backward every time the tunnel was run invalidating the results, and giving false shock data. The Schlieren system was missing one vital component to make …

Cal Poly Flight Test Platform For Instrument Development, Kyle Schaller, Ian Muceus, Aaron Ells

Aerospace Engineering

This report summarizes a six month effort to conceptually design, develop, and build an unmanned aerial vehicle to test a boundary layer data system (BLDS) developed by Dr. Russell Westphal and his team of mechanical engineering senior design students. The project is funded by Edwards Air Force Base and the United States Air Force Research Laboratory. During the first Cal Poly quarter of project work, January 4, 2010 to March 18, 2010, the team completed a conceptual and preliminary design. During the second quarter, March 18, 2010 to June 12, 2010, the team completed the construction and initial flight test …

Practical Experience With State-Of-The-Art Technologies In Scada Systems, Beau Freeman, Charles M. Burt

BioResource and Agricultural Engineering

A Supervisory Control and Data Acquisition (SCADA) system is a powerful tool which, when implemented properly in irrigation districts, can lead to improved water delivery service to farms, more effective operations, reduced spill (and therefore reduced diversions), and in some cases a reduction in costs (less labor, less energy, etc.). However, widespread adoption of SCADA and automation technologies remains a technical and financial challenge for most irrigation districts. In spite of many good hardware and software products available on the market now, putting all the pieces together requires specialized expertise. Nevertheless, by following some straightforward strategies and rules of good …

Lean Inventory Management System For Boeing Missile Defense, Danielle Partridge

Industrial and Manufacturing Engineering

Lean inventory management is influential for business. One of the wastes businesses aim to reduce, using lean principles, is inventory. Inventory management provides the essential tools for eliminating extra inventory and cost that is tied up in capital.

Boeing’s Ground Based Missile Defense inventory area was failing at meeting their proprietary lean manufacturing goals. There was a need for an inventory system that included: lean principles, inventory management and user-friendly capability. The goal of this project’s inventory management database process was to minimize inventory investment while still meeting functional requirements. The deliverables for this project met the needs of Boeing’s …

Ergonomic Methods To Improve Safety In The Construction Sector And Reduce Costs, Mona Barjasteh

Industrial and Manufacturing Engineering

Many small construction companies have difficulty providing a safe working environment for their employees because of their lack of resources. There is a need to provide a manual for small construction companies employing 10 or fewer workers with the best ergonomic solutions of the top most common injuries. Accidents in the construction field are very high with nearly 175,00o nonfatal injuries and 1,121 deaths in 2002. The nonfatal cases occur 7.1 times per 100 full time workers, while serious injuries occur 2.8 times per 100 full time workers. This information reveled the importance of focusing on minor injuries in order …

Statistical Quality Control In The Health Care Industry, Roberto Arce

Industrial and Manufacturing Engineering

In recognition to the increased length of stay of discharge patients, deteriorating patient care and staff satisfaction in a emergency department (ED), this project was set to improve these measures without reducing staff, adding new workers, and without increasing the number of beds. Lean methods such as value stream mapping (VSM) formed the basis of the project. This tool helped identify the patient process flow through the (ED) as well as the valued added and non-value added steps of the process. This project describes value stream map development in the emergency department at a community hospital. A current-state value stream …