Engineering Commons^™

Expansion In Existing And Future Franchises, Shane Hart, Daniel Jeng

Industrial and Manufacturing Engineering

Zensho Group has recently acquired the restaurant US based chains CoCo’s and Carrows but has not been able to affirm the same growth as the company has established in its home country of Japan. In order to fulfill their need to grow, extensive market analysis and research needs to be done. An expansion eastward and the introduction of their flagship restaurant chain, Sukiya, would offer growth potential. Determining the best locations for these new stores is the goal of this project. Low cost and high market penetration potential will be used to recommend the ideal locations that will benefit the …

A Practical Approach To Computer Donation Supply Chain For Non-Profit Organizations, John Jacob Burrell, Adam Robert Carpenter

Industrial and Manufacturing Engineering

The United States today has a plethora of unused electronic equipment. This equipment comes from universities, small businesses, corporations, and many other sources. This project looks at the best way to put this equipment back to use for the remainder of its usable life by donating it to non-profit organizations in need. In order to complete this project it was necessary to research the areas of Supply Chain Management, Operations Research, and Engineering Economics. The approach for this specific project first involves analyzing the current donation process at California Polytechnic State University – San Luis Obispo, and its ability to …

Aerodynamics Of A Supersonic Projectile In Proximity To A Solid Surface, Graham Doig, Tracie Barber, Eddie Leonardi, Andrew J. Neely, Harald Kleine

Aerospace Engineering

Flow around a Mach 2.4 NATO 5.56 mm projectile in close proximity to a ground plane was investigated using computational fluid dynamics for a direct numerical reproduction of live-range experiments. The numerical approach was validated against both the live-range tests and subsequent wind-tunnel experiments. A nonspinning half-model and a full, spinning projectile were examined to clarify the influence of rotation. Multiple ground clearances were tested to obtain clear trends in changes to the aerodynamic coefficients, and the three-dimensional propagation and reflection of the shock waves were considered in detail. The behavior of the flow in the near wake was also …

Subwoofer Frequency Response Optimization By Means Of Active Control, Luis Dominguez

Aerospace Engineering

Most subwoofer systems have difficulties producing frequencies in the low end of the hearing spectrum due to the added power requirements and instabilities. Active controls can transform the audio signal without changing physical characteristics and ultimately generating a more impressive audio system. A Linkwitz transform crossover was implemented to extend the low end frequency response of a sealed enclosure. A graphical user interface in MATLAB was written to aid in selection of components, driver and enclosure volume. The circuit board was built and integrated with a home theater system inside of a couch and tested with a Real Time Analyzer. …

On The Solution Of A Class Of Large Body Problems With Full Or Partial Circular Symmetry By Using The Finite-Difference Time-Domain (Fdtd) Method, Wenhua Yu, Dean Arakaki, Raj Mittra

Electrical Engineering

This paper presents an efficient method to accurately solve large body scattering problems with partial circular symmetry. The method effectively reduces the computational domain from three to two dimensions by using the reciprocity theorem. It does so by dividing the problem into two parts: a larger 3-D region with circular symmetry, and a smaller 2-D region without circular symmetry. An finite-difference time-domain (FDTD) algorithm is used to analyze the circularly symmetric 3-D case, while a method of moments (MoM) code is employed for the nonsymmetric part of the structure. The results of these simulations are combined via the reciprocity theorem …

Sports-Tool, Bryant Ung

Computer Science and Software Engineering

Creating events and finding people to play sports is a hard thing to do. The solution to this problem is to provide a web based interactive site that allows people to create and join different type of events and interact with each other by creating teams.

Cal Poly Rose Float Electric Vehicle, Jennifer Slone, Jason Sherrett, Dionysios Pettas, Timothy Baldwin

Mechanical Engineering

(1) Background:

The Cal Poly Rose Float is currently powered by a pair of V-8 internal combustion engines. This is the second project in a three phase effort to replace the existing drive engine with an electric motor powered by a DC bus. The main goal of this phase of the project is to get the motor selected in phase one spinning.

(2) Results:

Originally, the project involved programming a microcontroller to achieve motor control. The decision was made, early on, to approach this task in a different manner due to the team’s minimal background in programming and mechatronics. The …

Asme Human Powered Vehicle, Benjamin Knaus, Philip Basmadjian, Nick Supat

Mechanical Engineering

Speed Solutions has been contracted to design and build a Human Powered Vehicle (HPV) frame and drivetrain for the Cal Poly HPV club to use in their 2011 race season. This project is being funded by the Cal Poly HPV club and their sponsors. The goal is to design, test and build a bicycle frame that the HPV club can attach to a fairing of their design. Primary design considerations will include speed, weight, cost, rider ergonomics, reliability and ease of repair. This vehicle will be used to compete in ASME’s Human Powered Vehicle Challenge (HPVC) series of races.

Adapted Recumbent Bike, Kurtis Mundell, Dane Tiemeier, Laura Yakuma, Darius Yu

Mechanical Engineering

The adapted recumbent project was to redesign a disabled veteran’s recumbent bicycle.  The main areas of concern were the crank pedal, chain tension, braking and steering system, and ergonomics. Since the customer is an avid biker, this bike will be used often, so the design is based on the ease of repair and replacement.  The crank system was redesigned to a lightweight, adjustable part with chain clearance and high strength. The chain tension was improved by replacing the existing single idler wheel/chain tube system with a dual idler wheel system. The dual idler has a titanium sprocket in one of …

Development Of A Cubesat Payload To Model Particle Dampening In Space: Design And Implementation Of Software For Cp7, Daniel Walker

Computer Engineering

The California Polytechnic State University CubeSat student research & development group, PolySat, is currently in a mature development stage of a single unit CubeSat designated CP7. The CP7 mission implements a scientific payload designed to characterize particle dampers in microgravity conditions. When subjected to vibration, the momentum exchanges and frictional forces of the particles create a damping effect that can be optimized to suit a number of applications over a broad frequency and amplitude range. In space based applications, particle dampers would serve as a robust and simple device to eliminate jitter in optical assemblies and other sensitive instrumentation. This …

Utilization Of Automated Gcc Optimization For Dual-Width Instruction Sets On The Arm Architecture, Shane Watson

Computer Engineering

One of the most important considerations in embedded systems is code size. This consideration is obviously imposed by external factors such as cost and physical space, but what it boils down to is that we want our devices to be as powerful as they can within a (typically limited) specific form factor. This limits the amount of space we have for memory and as such we should always be considering the code size of our application and making sure it’s as efficient as possible. We also then need to consider other factors such as performance and power consumption. This is …

Modeling Of A Gyro-Stabilized Helicopter Camera System Using Neural Networks, Nicholas Joseph Layshot

Master's Theses

On-board gimbal systems for camera stabilization in helicopters are typically based on linear models. Such models, however, are inaccurate due to system nonlinearities and complexities. As an alternative approach, artificial neural networks can provide a more accurate model of the gimbal system based on their non-linear mapping and generalization capabilities.

This thesis investigates the applications of artificial neural networks to model the inertial characteristics (on the azimuth axis) of the inner gimbal in a gyro-stabilized multi-gimbal system. The neural network is trained with time-domain data obtained from gyro rate sensors of an actual camera system. The network performance is evaluated …

An Investigation Of Initially Delaminated Composite Sandwich With Delamination Arrest Mechanism Under Buckling Loading, Tony D. Tran

Master's Theses

This thesis involves the development of a fiberglass-foam composite sandwich structure with the introduction of delamination arrestment keys; therefore, a study of an initially delaminated composite sandwich structure was the experimental analysis on multiple configurations in how the arrestment keys are placed.

The first part of this thesis research was to the experimental design and manufacturing of the composite sandwich plates. These plates were later cut down to the specific test dimensions and manufacturing processes for the composite sandwich plates and test specimens were created. The composite sandwich plates were manufactured using a vacuum resin infusion process. The dimensions of …

The Next Generation Cubesat: A Modular And Adaptable Cubesat Frame Design, James Dolengewicz, Lucas Whipple, Stephanie Wong

Mechanical Engineering

The goal of this project is to develop an improved next-generation CubeSat structure for Cal Poly’s PolySat program. Notable achievements include significantly increased ease of access, design to optimize payload space, improved machinability, increased modularity and a platform which allows for easy integration of future payloads.

Robot Crawling Device And Tee Table, Todd P. Trauman, Kyle M. Colvin, David Charles Fantz

Mechanical Engineering

As golf becomes a more frequently enjoyed activity, equipment manufacturers such as Hot Stix Golf require updated testing mechanisms to actively compete in their respective markets. One such testing device is a golfing robot nicknamed the “Iron Byron”. Two issues were asked to be addressed for the senior project. First, the robot was practically immobile unless taken apart and moved with a forklift. The request from Hot Stix was to mobilize the robot so that it could easily be transported with minimal use of external help. Secondly, the initial tee-table was both poorly-designed and missing altogether. The new tee-table needed …

Water Well Drilling Rig Final Project Report, Alexander (Alex) Wargnier, Thad Jablonski, Coel Schumacher

Mechanical Engineering

In this report, the improvements of a previously produced cable tool drilling rig are described. The purpose of the rig is to drill water wells for use in Africa in order to provide safe drinking water to many in need. An affordable, effective, and controllable rig is the design goal for this project. With the San Luis Obispo Rotary Club sponsoring the project the design team of WHole Engineering have made necessary design choices to manufacture the product. Actions performed include background research of existing drilling technologies, analysis of top concepts for the controlling mechanism, and selection for the final …

The Quadricycle Hand And Foot Cycle, Marissa Chin, Parker Drennan, Spencer Nelson, Kevin Reidy

Mechanical Engineering

This report documents the design process from concept generation to manufacturing for a hand and foot powered cycle named the Quadricycle.  The Quadricycle project is a joint effort at California Polytechnic State University in San Luis Obispo between the Mechanical Engineering and Kinesiology Departments.  The project objectives are to design a portable cycle that can be powered by hands and feet simultaneously in order to provide recreation and rehabilitation for a person with a disability.  This project is funded under a grant by the National Science Foundation (NSF).

Directional Patch Antenna Array Design For Desktop Wireless Internet, Noah Snyder

Electrical Engineering

To improve desktop wireless internet access, two patch antenna configurations were investigated in order to find an alternative for a dipole antenna, which is commonly used for Wi-Fi access. A Linksys WMP54G pci-card wireless adapter was used to test three antennas for 802.11g communications. The standard WMP54G dipole antenna and two patch antenna configurations were tested for Wi-Fi signal strength. The antennas were also tested in Cal Poly’s anechoic chamber to obtain resonant frequency and gain measurements. A 2.437 GHz center frequency, 72 MHz bandwidth antenna consisting of a single microstrip patch was constructed. After the patch antenna was determined …

Thermal Models For A 3 Cm Miniature Xenon Ion Thruster, Coleman Thomas Younger

Master's Theses

In order to support UCLA’s development of the 3 cm Miniature Xenon Ion (MiXI) thruster, Cal Poly has a 3 cm thruster under development. This version, called MiXI Cal Poly Version 1 (MiXI-CPv1), is complete and has been utilized in vacuum chamber thermal validation testing. Testing on this version was used to check the validity of heat transfer simulations modeled in SolidWorks. Investigations of the 3 cm ion thruster configuration were intended to discover the driving factors affecting the thermal behavior of the discharge chamber and surrounding design space.

Numerical simulations indicate that the heating of the samarium cobalt permanent …

Cotextual Android Education, James R. Reed

Master's Theses

With advances in mobile phone hardware, the demand for mobile applica- tions has risen drastically. This has resulted in mobile phones becoming a pop- ular new medium for application development. However, the body of knowledge for contextual examples and tutorials leaves much to be desired. As of January 2010, California Polytechnic State University has offered a mobile development class that teaches students how to write applications for phones running Google’s Android platform. This class aims at taking advantage of students’ current in- terest in mobile applications to teach them about difficult computer science topics. As a corollary, the class hopes …

Modeling And Simulation Of Autonomous Thermal Soaring With Horizon Simulation Framework, Zhenhua Li

Master's Theses

A thermal is a column of warm rising air triggered by differential heating on the ground. In recent studies UAVs were programmed to exploit this free atmospheric energy from thermals to improve their range and endurance. Researchers had successfully flown UAVs autonomously with thermal soaring method. Most research involved some form of flight simulation. Improvements to the aircraft and thermal models for simulation purpose would enable researchers to better design their UAVs and explore any potential flaws in their designs. An aircraft simulation with a thermal environment was created in Horizon Simulation Framework, a modeling and verification framework that was …

Hot Air Balloon Navigation, Dustin Blackwell

Aerospace Engineering

This report describes a program used for navigating a hot air balloon.  The program, Balloon_Trip, was written using MATLAB and gives a flight path to follow from a start position to an end position.  Balloon_Trip calculates the flight path by taking in wind conditions and then flying through these different winds so as to steer the hot air balloon.  The program calculates the flight path by taking into consideration at all times how the wind will propel the balloon while it is rising or falling in elevation.  It then takes the most direct and least complicated, if not fastest, …

Global Positioning System, Vladimir Villalba

Electrical Engineering

The Global Positioning System (GPS) is a navigation network consisting of 24 satellites in orbit around the Earth. This satellite system provides the accurate position of an individual in all weather conditions at all times around the world. Individuals can use GPS receivers to locate where they are, pinpoint where they want to go with any form of transportation.

The senior project embarks in a path to understand the workings of the GPS satellite system. To accomplish this task, the concepts learned in Electrical Engineering will be implemented. This report encompasses the design process and steps taken in prototyping a …

Auto Dialer Wireless Smoke Detector/Alarm System, Manny Linhares

Electrical Engineering

Smoke Detectors/Alarms save the lives of over sixty percent of people each year in the United States. Most of the existing homes are still fitted with the normal smoke detectors either running out of the 120V ac wiring or out of a 9V dc battery. These alarms are perfectly fine to alert residents if there is a fire while they are home. But for people who are away from home when a fire occurs, it would be nice if they could be alerted automatically of such an occurrence and therefore be able to act upon the event by either calling …

Mobility Aid: A Dual Purpose Walker And Scooter, Zack Blois, Robia Choi, Kristin Dills

Mechanical Engineering

The Mobility Aid project was proposed by Theresa Mortilla and Idee Shapiro. The goal of the project was to design and build a device that can quickly and easily transform between a mobility walker and an electric scooter to allow for more freedom of mobility. The inspiration for this project arose from the fact that Theresa suffers from multiple sclerosis in her legs and can only walk for about thirty minutes at a time until she gets too fatigued and must sit down and rest. This device would provide her with the ability to continue moving while giving her legs …

Foam Wars Ii, Sumant Advani, Sivadas Menon, Casey Pieplow

Mechanical Engineering

The team producing Foam Wars II consists of three Mechanical Engineering students and five Kinesiology students (three the first two quarters and two the last quarter) at California Polytechnic State University, San Luis Obispo. The project is the second iteration of Foam Wars as a senior project at Cal Poly, sponsored by Dr. Kevin Taylor under the National Science Foundation grant. Persons with disabilities often feel limited when it comes to recreational activities and Foam Wars would provide them with an outlet to interact and engage themselves in a group setting. The game consists of various wheelchair attachments that would …

Universal Play Frame Vi, Justin Bazant, Cullen Crackel, Anthony Franceschi

Mechanical Engineering

This design report details the design process utilized by Adaptive Exercise Designs (AED) in creating the sixth design of the Universal Play Frame (UPF). The UPF is an adaptive frame which supports a variety of devices that allows athletes in wheelchairs with limited range of motion to participate in physical activity. The past five frame designs do not meet the needs of the Friday Club due to complications with function and time constraints. To ensure all of Fridays Club's needs were met, the problem was better defined by converting the customer requirements into engineering specifications. The design process our team …

Piedras Blancas Clock Works, Andrew James, Andrew Jupin, Matt Weber

Mechanical Engineering

In 1875, the Piedras Blancas Lighthouse was built to warn ships sailing the California coast of the hazards of the rocky shore. In 1949 a fierce storm damaged the top portion of the lighthouse and the eight ton cast iron and brass assembly had to be replaced by a much lighter piece that still served the purpose of warning oncoming vessels. The former top portion came to rest in downtown Cambria and is still there today, enclosed in a glass room to be observed by visitors and townspeople. Today, the Piedras Blancas Light station is cared for by the Bureau …

A Dynamic Approach To Determine The Product Flow Nature In Apparel Supply Chain Network, Mohammed Marufuzzaman, Ahmed M. Deif

Industrial Technology and Packaging

This paper presents a novel metric, product flow number, to determine the product flow nature across the supply chain of apparel industries. The metric is based on mapping the dynamics of fluid flow across a pipe to product flow across a supply chain. Numerical analysis is conducted to examine the impact of the different metric parameters on the product flow. Results showed that smooth dynamics can be achieved through scaling production and extending delivery times, while undesirable dynamics are tied to complex product designs and increasing number of suppliers. Finally, the paper demonstrated how the new metric can be used …

Carbon Fiber Subwoofer Enclosure, Dustin Trone

Industrial and Manufacturing Engineering

This project addressed a gap between consumer demand and market supply for performance car audio systems. It was recognized that there is a current desire for products made with carbon fiber due to its aesthetic appeal, strength to weight qualities, and general popularity. And this desire for such products applies to audio systems, and more specifically to aftermarket subwoofer systems. The projects main goal was to develop a product to meet the largely unmet demand for a carbon fiber subwoofer enclosure. This project centered on the best way to manufacture a carbon fiber subwoofer enclosure, with a focus on materials, …