Engineering Commons^™

Consolidation Of Company Abc, Estelle Sillari-Owen

Industrial and Manufacturing Engineering

This project aims to solve Company ABC’s issues in order to keep the company afloat and to keep the company profitable. This was done by reducing Company ABC’s organizational and inventory build-up issues. The project aims to reduce the company’s dependence on outside storage, with plans of consistent inventory reduction over the next year. An implementation plan was created to ensure the company keeps on track to increase profits and prevent against increasing inventory costs.

Manufacturing Processes In An All-Aluminum Airframe, Stewart Mcdougall

Aerospace Engineering

One often overlooked aspect to building an aircraft is the manufacturing process used to put it into production. This may be a major contributor to acquisition cost and requires a large amount of money to implement. Once all the tooling has been purchased, one of the greatest costs is labor. The experience of building an all-aluminum aircraft shows that the production process is one which may be done in many different ways. Minimizing the assembly time is important for aircraft manufacturers and one of the best ways to do that is on the assembly line itself. Specific practices in the …

Implementation Of Novel Group Delay Decomposition Method And Surgical Protocol For Assessing Peripheral Neuropathy, Sammy Paul Nicolas

Master's Theses

This paper outlines a surgical procedure for exposing and stimulating the sciatic nerve of an anesthetized rodent for purposes of obtaining conduction velocity readings. The ability to accurately quantify nerve conduction velocity has potential for use in the field of diagnostic medicine and disease characterization. An accurate reading depends on both the surgical method used to expose the desired nerve without imposing onto it any physical trauma as well as the stimulation protocol used to initiate action potentials. This paper contains the specific steps required to set up the necessary hardware and software for electrical stimulation as well as a …

Wolfpack Gear Inc. Composite Frame Firefighter Backpack, Gabriel Mountjoy, Blair Ridings, Carl Drummond Buchenroth

Mechanical Engineering

No abstract provided.

Determination Of Human Powered Helicopter Stability Characteristics Using Multi-Body System Simulation Techniques, Sean M. Brown

Master's Theses

Multi-Body System Simulation combined with System Identification was developed as a method for determining the stability characteristics of a human powered helicopter(HPH) configurations. HPH stability remains a key component for meeting competition requirements, but has not been properly treated. Traditional helicopter dynamic analysis is not suited to the HPH due to its low rotation speeds and light weight. Multi-Body System Simulation is able to generate dynamic response data for any HPH configuration. System identification and linear stability theory are used to determine the stability characteristics from the dynamic response. This thesis focuses on the method development and doesn't present any …

Silicon Wafer Temperature Distribution, Daniel Gonzalez, Nathan Jones, Dylan Justice

Mechanical Engineering

Applied Materials is a global company that designs equipment for use in the semiconductor manufacturing industry. The scope of this project covers process chambers used for depositing thin chemical films onto silicon wafers. These processes must take place in particularly specific environments– including extremely low pressures and high temperatures. One challenge engineers face when designing these processes is carefully controlling the thermal behavior of silicon wafers. Typically, behavior is predicted using time consuming and computationally expensive CFD simulations. We have been asked to address this issue with a simpler, faster model which will allow engineers to reduce the total number …

Hepa Filter Evaluation Furnace Control Unit, Matt Gainer, Marc Goupil, Andrew Woolrich

Mechanical Engineering

No abstract provided.

Optimizing The Mechanical Characteristics Of Bamboo To Improve The Flexural Behavior For Biocomposite Structural Application, Jay Lopez

Master's Theses

Global awareness and preservation have spurred increasing interest in utilizing environmentally friendly materials for high-performance structural applications. Biocomposites pose an appealing solution to this issue and are characterized by their sustainable lifecycles, biodegradable qualities, light weight, remarkable strength, and exceptional stiffness. Many of these structural qualities are found in applications that exhibit flexural loading conditions, and this study focuses on improving the bending performance of engineered biocomposite structures. The current application of biocomposites is increasing rapidly, so this expanding research explores other natural constituent materials for biocomposite structures under flexural loading.

The renewable material investigated in this study was experimentally …

P3ht:Pcpdtbt:Pcbm Multi- Polymer Single Layer Solar Cells, Ted Andreas

Physics

OPV efficiencies are limited by their narrow absorption; rather than using tandem architecture to overcome this obstacle, our group combined P3HT and PCPDTBT into a single layer BHJ solar cell that achieved 2.0% PCE. This is 33% higher than the pure P3HT control from this group, proving that multi-polymer solar cells have the potential to outperform their single-polymer components.

Modernization Of House #3: Improving Greenhouse Cut Flower Production And Students' Experience By Modernizing House #3, Kristina Anton

Biomedical Engineering

This paper documents the modernization of the black cloth, lighting, shade, and support systems in one of Cal Poly's on-campus, student operated cut flower production greenhouses. Problems with the old system are examined along with design requirements for a new system. Alternate designs are considered along with the installation process of the chosen design.

Consumer Attention To An Over-The-Counter Warning In Four Different Styles Of Design, Abhishek Gawasane, Laura Bix, Javier De La Fuente, Raghav Prashant Sundar, Timothy J. Smith

Industrial Technology and Packaging

The study consisted of three objectives: (a) to test the relative prominence and conspicuousness of a warning required by US law to be conspicuous; (b) to explore whether or not the conspicuousness of the said warning can be enhanced graphically; and (c) to develop preliminary data for power analysis that would guide decisions related to sample size in future studies.

Seventeen subjects viewed four over-the-counter drug packages (each with a different style of warning) along with five other products while wearing an eye tracking device. Four styles of warning were used on the over-the-counter drug packages: no outline and no …

Reliability Analysis Of Low-Silver Bga Solder Joints Using Four Failure Criteria, Erin A. Kimura

Master's Theses

The appropriate selection of failure criterion for solder joint studies is necessary to correctly estimate reliability life. The objective of this study is to compare the effect of different failure criteria on the reliability life estimation. The four failure criteria in this study are a 20% resistance increase defined in the IPC-9701A standard, a resistance beyond 500 Ω, an infinite resistance (hard open), and a failure criterion based on X-bar and R control charts. Accelerated thermal cycling conditions of a low-silver BGA study included 0°C to 100 °C with ten minute dwell times and -40°C to 125°C with ten minute …

Constant Conduction Angle Biasing For Class C Monolithic Rf Power Amplifiers, Gursewak Singh Rai

Master's Theses

In modern wireless communication systems, a base station typically serves a few hundred users within its cell coverage. To combat the near-far problem – the situation where a nearby user’s strong cellular signal masks the cellular signal of a faraway user – base stations continually enforce power control. That is, nearby users must lower their transmit power. In CDMA technology, power control can be as large as 70-80dB. At low power outputs, this greatly impacts the performance of the RF power amplifier (PA) in the cellular device. For small RF drives, the magnitude of the output RF current approaches the …

Fault Mapping With The Refraction Microtremor And Seismic Refraction Methods Along The Los Osos Fault Zone, Justin Riley Martos

Master's Theses

The presence of active fault traces in proximity to any new infrastructure project is a major concern for the design process. The relative displacements that can be experienced in surface fault rupture during a seismic event must be either entirely avoided or mitigated in some way. Blind faults present a significant challenge to engineers attempting to identify these hazards. Current standards of practice employed to locate these features are time consuming and costly. This work investigates the geophysical methods of refraction microtremor (ReMi) and seismic refraction with regard to their applicability in this task. By imaging a distinct lateral variation …

Mechanical Optimization And Buckling Analysis Of Bio-Composites, Cameron D. Chan

Master's Theses

Today’s environmental concerns have led a renewed search in industry to find new sustainable materials to replace non-renewable resources. President Barack Obama also quoted in the recent 2012 Presidential Debate “that there is a need to build the energy sources of the future and invest in solar, wind, and bio-fuels.” Bio-composites are believed to be the future and the new substitute for non-renewable resources. Bio-composites are similar to composites in that they are made up of two constituent materials; however the main difference is that bio-composites are made from natural fibers and a biopolymer matrix. This research investigates the buckling …

Work In Progress: Outreach Assessment: Measuring Engagement, Lizabeth Schlemer, John Oliver, Katherine Chen, Sophia Rodriguez Mata, Eric Kim

Industrial and Manufacturing Engineering

The Learn By Doing Lab (LBDL) at Cal Poly, San Luis Obispo is an on-campus laboratory where 5th through 8th grade students are taught by undergraduates who may be planning a careers in teaching. The two populations - elementary students and undergraduates - are equally important in the process. Since 2008, the lab has seen over 4000 elementary and junior high students and over 100 undergrads have participated. In most outreach assessment the number of individuals participating is an important metric, but this last Spring we experimented with a more in depth measure of effectiveness. As in any learning experience …

Validation Of The Ballistic Limit Equation For Monolithic Aluminum Shielding At Geostationary Orbital Debris Impact Velocity, Brandon Holladay

Aerospace Engineering

The Cal Poly Electro Magnetic Rail Gun was used to eject a 0.370 gram, rectangular aluminum projectile towards a 1/16 inch monolithic aluminum plate at a speed of 280 ± 50 m/s. The resulting impact left a large attached spall on the back of the shielding. The impact damage was compared to an industry ballistic limit equation for a spherical aluminum projectile of similar diameter and was shown to have slightly less damage than the expected results.

In addition, an aluminum mesh double bumper shield was fired upon in order to verify its higher protection per aerial density as well …

Warehouse Redesign, Cristine Carmel Dewar

Industrial and Manufacturing Engineering

A young, growing biomedical company is expanding its warehouse space to keep up with the increasing production. This project’s goals were to recommend a layout and improve a process that would minimize the distance traveled by the material handlers, increase the safety of the warehouse by implementing visual controls, implement ergonomics to reduce chance of injury, and save money for the company. To achieve this first I familiarized myself with their current processes and department and the space required for their current and future production levels. Next I created two alternative layouts, the first (Layout A) to minimize distance and …

Three-Axis Stabilized Earth Orbiting Spacecraft Simulator, Alan F. Ma, Nikola N. Dominikovic

Aerospace Engineering

This report details the method and results of the program created for simulating an Earth orbiting spacecraft with control actuators and orbital perturbations. The control actuators modeled are reaction thrusters, reaction/momentum wheels, and control moment gyros (CMG). The perturbations modeled were gravity gradient, electromagnetic torques, solar radiation pressure, gravity gradients, third-body effects, Earth oblateness and atmospheric drag. This simulation allows for satellite control in all 6 degrees of freedom for any Earth orbiting spacecraft. Assumptions include rigid body dynamics, no sensor noise, constant spacecraft cross-sectional area, constant coefficient of drag and reflectivity, ignoring the effects due to the moon, moment …

Transferability And Robustness Of Predictive Models To Proactively Assess Real-Time Freeway Crash Risk, Cameron Hunter Shew

Master's Theses

This thesis describes the development and evaluation of real-time crash risk assessment models for four freeway corridors, US-101 NB (northbound) and SB (southbound) as well as I-880 NB and SB. Crash data for these freeway segments for the 16-month period from January 2010 through April 2011 are used to link historical crash occurrences with real-time traffic patterns observed through loop detector data.

The analysis techniques adopted for this study are logistic regression and classification trees, which are one of the most common data mining tools. The crash risk assessment models are developed based on a binary classification approach (crash and …

Finite Element Model Updating For Rotary Machinery, Nathalie Gotin

Master's Theses

The main approach of this thesis was to develop a mathematical model that represents a rotary machine. Experimental data was used to define a finite element model (FEM). In order to obtain the experimental data, the rotary machine had to be balanced. An impact hammer test made it possible to obtain frequency response functions (FRF). The frequency response functions were curvefitted in order to obtain the mode shapes and natural frequencies.

Mathematical models have been created with ABAQUS and Matlab. For the Matlab Model the assumption has been made that the rotor machine consists of a specific number of beam …

Dynamic Field Test Of A Model Levee Founded On Peaty Organic Soil Using An Eccentric Mass Shaker, E. T. Reinert, S. J. Brandenberg, J. P. Stewart, R. E.S. Moss

Civil and Environmental Engineering

A dynamic field test of a model levee was performed to study the behavior of very soft and compressible peaty organic soils that commonly underlie levees in the Sacramento / San Joaquin Delta in northern California. This first-of-its-kind test applied dynamic loads to the levee/peat system using a large eccentric mass shaker mounted on the levee crest. Loads from the shaker and the inertia of the levee section are transmitted to the peaty organic soils as base shear stresses, and rotational demands that manifest as normal pressures at the embankment/peat interface. We seek to characterize the transmission of seismic energy …

Fundamental Sizing Implications Of Constant Or Increasing Weight Aircraft, Robert A. Mcdonald

Aerospace Engineering

As the energy storage capabilities of batteries and fuel cells advance, these technologies are increasingly being considered for aircraft primary propulsion. In addition to other fundamental differences from conventional systems, these concepts may have constant or even increasing mass throughout the mission. In this paper, the implications of constant or increasing mass on aircraft sizing are considered with the aim of generating insight for the design of these systems.

Dynamic Field Test Of A Model Levee Founded On Peaty Organic Soil Using An Eccentric Mass Shaker, E. T. Reinert, S. J. Brandenberg, J. P. Stewart, R. E.S. Moss

Civil and Environmental Engineering

A dynamic field test of a model levee was performed to study the behavior of very soft and compressible peaty organic soils that commonly underlie levees in the Sacramento / San Joaquin Delta in northern California. This first-of-its-kind test applied dynamic loads to the levee/peat system using a large eccentric mass shaker mounted on the levee crest. Loads from the shaker and the inertia of the levee section are transmitted to the peaty organic soils as base shear stresses, and rotational demands that manifest as normal pressures at the embankment/peat interface. We seek to characterize the transmission of seismic energy …

Performance Effects Of Damage Arrestment Devices On Sandwich Composite Beams Under Monotonic Loading, Yvette Vanessa Wood

Aerospace Engineering

Face-core delamination has become a subject matter in the Aerospace industry, as it can lead to early failure. In this study, sandwich composite beams are tested initially with no delamination to obtain the ultimate strength. A second case of delamination in the center of the beam in initialized to verify a decrease in ultimate strength. This experiment investigates the performance effects of the addition of Damage Arrestment Devices (DADs), in composite sandwich beams. The performance criterion is measured by strength in flexural loading test. The objective of this project is to verify an increase in the strength and performance with …

Hydrodynamic Focused Passive Separation Under Continuous Flow In A Microfluidic Chip, Jad Kanbar

Master's Theses

A continuous flow, passive separation device was designed using an equivalent circuit to create variable flow rates for hydrodynamic focusing to drain channels and collection outlets. By varying the diameter of the sample inlet connection into the reservoir, the particle position was influenced significantly, which enabled desired separations. Additionally it was noted that the relative, horizontal position of the inlet also had a significant influence on particle position within the device. A dimensionless number, the Characteristic Sample Inlet, was developed to relate geometric properties of the inlet reservoir to downstream particle distribution. It was found that a 2:1 ratio between …

Optimal Slewing Of A Constrained Telescope Using Seventh Order Polynomial Input Torques, Julia K. Bush

Master's Theses

Two-axis gimbals are frequently used to point cameras and telescopes at various points of interest for surveillance, science, and art. The rotation of a two-axis gimbal system is governed by nonlinear angular momentum equations of motion. This paper presents a method for slewing a telescope in space with a gimbaled sensor attached to a nominally non-rotating spacecraft using two seventh order polynomial input functions to characterize torques. To accomplish this task, picking the optimal coefficients of the seventh order polynomial was necessary. It was also desired to use constraint equations to limit the excursion, angular velocity, angular acceleration, and jerk …

Responding To Dangerous Accidents Among The Elderly: A Fall Detection Device With Zigbee-Based Positioning, Michael R. Putnam

Master's Theses

The following paper describes a fall detection and activity monitoring system with position detection based on Zigbee transceivers.The main objective is to reduce the time taken for emergency personnel to respond to falls among the elderly. Especially when the victim is unconscious or delirious, position tracking reduces location determination time within a busy hospital or nursing home environment and facilitates immediate treatment. Reduced response times correlate to decreased morbidity and mortality rates. Background is provided on the major wireless network advances currently deployed in a healthcare setting for asset and personnel tracking, etiology of falls, and several methods of detecting …

Identification Of Orbital Objects By Spectral Analysis And Observation Of Space Environment Effects, Jason B. Rapp

Master's Theses

This report presents an investigation and development of the methods for orbital object identification. Two goals were accomplished in this master’s thesis; the development of a method of inverting material proportions from an object’s combined spectrum, and the investigation of methods and initialization of measurement of space environment effects on spectral features of common spacecraft materials. A constrained least squares approach was chosen for inverting spectral proportions from the combined spectra. The final results fall within 1 - 15% of the original spectrum, depending on the quality and noise levels of the original spectrum. Additionally, the effects of outgassing and …

Analysis Of A Goldschmied Propulsor Using Computational Fluid Dynamics Referencing California Polytechnic's Goldschmied Propulsor Testing, Cory A. Seubert

Master's Theses

The Goldschmied Propulsor is a concept that was introduced in mid 1950's by Fabio Goldschmied. The concept combines boundary layer suction and boundary layer ingestion technologies to reduce drag and increase propulsor efficiency. The most recent testing, done in 1982, left questions concerning the validity of the results. To answer these questions a 38.5in Goldschmied Propulsor was constructed and tested in Cal Poly's 3x4ft wind tunnel. The focus of their wind tunnel investigation was to replicate Goldschmied's original testing and increase the knowledge base on the subject. The goal of this research was to create a computational fluid dynamics (CFD) …