Engineering Commons^™

Enterprise Smart Outlet, David Faltmier, Matthew Mcgill, Luke Stencel

Electrical Engineering

The purpose of our senior project, Enterprise Smart Outlet, is to create an electrical outlet which will allow enterprise users to monitor and change their power consumption habits on a large scale. The initial goal of this project is to allow consumers to see their power consumption per outlet in real time, and then using that information conform their future habits to help them conserve electrical energy, and more importantly, money. Three requirements for our project to meet our initial goal are, the outlet will work in a standard electrical outlet and be completely compatible with current electrical standards, the …

Shark Alert: Early Warning System, Cory Peterson, Marc Rauschnot, Taylor Mcclain

Electrical Engineering

The Shark Alert Early Warning System is a device geared toward avid beach goers such as surfers, divers, and swimmers. The system is composed of an ultrasonic transmitter mounted on a shark’s dorsal fin and a receiver worn by the user around the ankle. The receiver alerts the user to the presence of a shark upon ultrasonic signal detection.

The receiver warns the user through both visual and tactile (vibration) alerts to ensure user notification. This circuit was built and tested in the EE labs and Recreation Center pools to determine transmission range. The receiver detects the transmitted signal up …

U-Larm Bike Lock Accessory, Craig Cary

Electrical Engineering

Over the past few years, anti-pollution organizations and activists have encouraged society to use eco-friendly transportation like ride-sharing and biking. According to the San Luis Obispo Police Department, however, bike owners report approximately 269 bike thefts per year. This statistic illustrates the need for a more effective way to protect bicycle property.

The development of an alarm system for the U-Lock bike lock encourages bike owners to ride their bicycles by providing them with additional measures to protect their bicycle property. This U-Lock accessory, when cut, sounds an alarm to alert nearby persons of the theft-in-progress. In order to turn …

Department Of Energy Solar Decathlon 2015, Dante C. Carrillo, Dion A. Celebrado, Jenna I. Denhaan, Christian F. Ferrer, Simon D. Hauser, Audrey L. Rempher, Joseph H. Rohrer, Casey S. Smith

Electrical Engineering

The goal of the Department of Energy (DOE) Solar Decathlon 2015 project is to design, build, and operate a zero-net energy solar-photovoltaic (solar-PV) powered residence. It is an international competition taking place in the fall of 2015 in Irvine, California. The design needs to be attractive, energy-efficient, innovative, and affordable. The Cal Poly team includes students from a variety of majors, including Architecture, Mechanical Engineering, Electrical Engineering, and many more. The different disciplines need to work together to create a functional and cohesive design. For our senior project, we have designed the electrical systems in the home, including the power, …

Test Automation Program For 20-126, Stacia Kwong

Electrical Engineering

No abstract provided.

Smart Shot: Electronic Target With Smartphone Application, Tyler Stuart Pickett, Taylor Jacob Hutchinson

Electrical Engineering

The objective of this project is to develop an electronic system for recreational shooters that functions as a target with real-time feedback. The system provides a user-friendly alternative to paper targets and expensive competition scoring systems. One of the largest challenges presented by this project is balancing cost, durability, and sensitivity. The scope of this project includes the design and implementation of a target assembly, an electronic system, and a smartphone application.

The system is comprised of three main modules: the target, the control module, and the smartphone app. The electronic target communicates wirelessly with the smartphone via Bluetooth. Once …

Rocket Cam: Low Frequency Analog Transmission Of Digital Video, Thomas J. Higdon

Electrical Engineering

The camera module provides data for improving models of dynamic events on Orbital ATK Corp. rockets and aids in troubleshooting, if necessary. Video images provide a valuable addition to the strain, vibration, shock, and acoustic data used for modeling dynamic events, such as stage separations. The cameras can record a duration of video data suitable for capturing a dynamic event and of high enough quality to aid in its modeling. The module readily integrates into the rocket’s current analog data collection systems. The project has further relevance to any other application that necessitates video data transmission over similar limited-bandwidth, analog …

Design Of A High Powered Led Driver, Omar Renteria

Electrical Engineering

Research has shown that LED lighting products have greater energy efficiency, longer lifespans, and lower heat outputs than compared with traditional lighting technologies. An estimated growth of 45 percent per year through 2019 for the LED lighting market should provide a wider variety of LED related products to consumers. The goal of this project; to create a driving circuit that powers a set of high powered LEDs. The implementation of LEDs significantly reduces the power consumption in comparison with other types of light such as incandescent bulbs or CFLs, therefore saving the consumer money.

Current Protection For The Energy Harvesting From Exercise Machines (Ehfem) Project, Colton Crivelli

Electrical Engineering

The Energy Harvesting from Exercise Machines (EHFEM) project intends to create an exercise machine that recycles the energy expended by an athlete operating the machine by sending it to the electric grid. The work done by the user goes through a DC-DC converter and an inverter in order to prepare it for delivery to the grid. A protection circuit ensures that the inverter does not try to pull too much current from the DC-DC converter. The project implements a current protection system that ensures the system doesn’t experience an overcurrent condition.

The Dc House Project: Electrical System Design & Construction, John Bradley

Electrical Engineering

This project entails the design and assembly of the photovoltaic system, switchboard panel enclosure, and battery enclosure for the DC House’s main electrical system. The intended purpose of this project is to provide the electrical framework necessary for future students to easily modify and add to this rendition of the DC House. The principle design implements a variety of renewable energy sources, however this senior project only uses solar power in order to maintain a manageable scope. Each of these renewable energy sources are stepped down to a voltage of 24V and input to a Multi Input Single Output DC …

The Zephyr Charge: A Wind-Powered Usb Charger, James Dean Carson, John Pina Lopez Iii

Electrical Engineering

The Zephyr Charge project is to design and build a cell phone charger using a small wind turbine generator that can be useful to the fishermen community, namely fishermen of third world countries. The generator will output to USB for ease of charging capability. The size of the whole system should be light enough to move around, and the turbine itself will be mountable onto an edge of a wall. The goal of this project is to design and build a compact and easy to use cell phone charger, which is also efficient.

In order to be a practical product, …

Audio Dsp Amplifier, William Saba, Nicholas Barany

Electrical Engineering

The key concept of this project is to create a microcontroller system that serves as an interface between a DSP board and a total of 4 amplifier channels. The fully integrated system will provide a fully inclusive audio DSP amplifier for use in 2.1 or bi-amplified stereo speaker setups. The project will focus on developing an intuitive interface that is operable from the device or a computer that programs the DSP board for various speaker applications. The finished design will provide a custom computer sound amplifier in one package, eliminating the need for multiple components by interfacing two stereo amplifiers, …

Design Of A Multiple Input Single Output Dc-Dc Converter For The Dc House Project, Chad Santos, Siby James

Electrical Engineering

This senior project report describes the design and further development of the MISO (multiple input, single output) circuit. The MISO circuit harnesses power from four separate renewable energy sources (hydro, solar, wind and man) and converts it into a single DC output voltage. Though this circuit has been initially designed and tested in previous years, it was only developed enough to use as a test circuit. Further implementation will allow for the MISO to be available in a more practical setting. Professor Taufik will then take the newly designed MISO circuit to implement in a house in Indonesia.

Dual Channel Matrix Switch Audio Receiver, Austin Fox

Electrical Engineering

The Dual Channel Matrix Switch Audio Receiver controls 2 separate audio output channels. Each channel plays any of the system's 3 inputs. This controller enables a user to play two separate audio signals through two separate speaker channels. The system design allows audio input from 2 RCA sources or 1 RCA source and a phono source. The system outputs an audio signal for each output simultaneously at up to 36W on each channel for an 8Ω load. The device allows a user to control the audio input and the volume of each output channel. An Arduino Uno R3 microcontroller interfaced …

Fluid Midi Ribbon Guitar, Noah Baker

Electrical Engineering

This project was developed to create a new electronic instrument based off of a guitar. The design will give the user more chord combinations than are available on a typical guitar, the ability to retune each “string”, and customizable MIDI controller outputs, while trying to retain a similar playing style. The initial design for this project included implementing an onboard synthesizer (analog or digital). This idea was scrapped for time and cost considerations and replaced with MIDI output which will yield user customizable sound through virtual instruments, such as Massive.

Cal Poly Application Parking Feature Integration, Ryan Lin

Electrical Engineering

The Cal Poly mobile app provides students, faculty, staff, and visitors of Cal Poly with information pertaining to the campus (such as information about admissions, campus life, campus news, etc.) This project extends the functionality of the Cal Poly app to provide information regarding campus transportation. In particular, this project provides 1. a live twitter feed with announcements about events that may affect the roads and parking spaces on campus 2. an ‘alternative transportation’ points of interest map illustrating the locations of zipcars and electric vehicles charging stations on campus and 3. an easy to use interface to reserve an …

Investigating The Cause Of Unique Mechanical Behavior In Platinum Alloy Guidewire Tips, Evan Borgeson, Alfred Rosen

Materials Engineering

The platinum alloy used by Abbott Vascular in guidewire tips exhibits a yielding behavior characterized by an abrupt transition from elastic to plastic zones and high ductility. This yielding behavior was hypothesized to be a result of one of three structural phenomena: ordering, solute strain aging, or interstitial strain aging. To test for these strengthening mechanisms in the wire, X-ray diffraction analysis, heat treatments, and tensile testing were completed. The wire has a diameter of 0.0025 inches and was supplied in two forms, the final stress relieved state, and as-drawn from the production line. Heat treatments were performed at 130 …

The Lecturescribe Platform, Kevin Backers, Kevin Feutz, Erik Owen

Computer Science and Software Engineering

The LectureScribe platform is a free classroom transcription service that is deployed as a website. The platform allows professors to talk into a microphone, and deaf or hard of hearing students have the ability to see what the professor is saying in real time on their personal device. LectureScribe was created by three Cal Poly Software Engineering students. This document details the platform itself, as well as the developers’ process of creating this software system over the span of two academic quarters.

G Boots: A Real-Time 3d Puzzle Video Game Graphics Senior Project, Zachary Glazer

Computer Science and Software Engineering

G Boots is a real-time 3D puzzle video game. It uses OpenGL, using GLSL for shaders, in order to implement cross platform support of advanced rendering and shading techniques. A level editing system was implemented so that anyone can make or edit levels that can then be played in the game. At the end of two quarters of development by a single developer, one polished proof of concept level was created using the level editing system in order to show the feasibility of the project.

Forest Sign Maker, Victor Espinosa Iii, Kevin Ly, Lisa Yip

Mechanical Engineering

Executive Summary:

The Inyo National Forest is arguably one of the most beautiful locations in California, containing natural masterpieces such as Mount Whitney and the Ancient Bristlecone Pine Forest. Despite its magnificence, the Inyo National Forest can be a treacherous region. The Friends of the Inyo take pride in being able to facilitate the viewing experience for all outdoorsmen by maintaining the mountain trails, which includes providing adequate trail signage.

Unfortunately, there is a fundamental issue with the recent state of trail signage in the Inyo National Forest: the rate at which signs are being vandalized or naturally destroyed is …

Tadpole Tandem Electrically Assisted Tricycle, Austin Frederickson, Anthony Jacques, Kris Lawrence, Preston Mcelroy

Mechanical Engineering

The purpose of this senior project was to investigate the possibility of making bikes (as a regular mode of transportation) look much more appealing to the general public. To that end, an electric motor assist system was added to make it easier for the operators of the vehicle. A fairing was added to protect the rider from wind and rain, and an electrical subsystem consisting of a microcontroller and many other components was also added. The electrical subsystem was meant to store the information of different riders, calculate calories burned using a heart beat sensor, and increase visibility using strategically-placed …

Compact Tire Tester, Jess Mccafferty, Daniel Rodman, Michael Schuster, Connor West

Mechanical Engineering

No abstract provided.

Freedom Ski, Toby A. Goldsteinholm, Ashley Scharff, Justin Satnick, Markus Rutner

Mechanical Engineering

The current availability of water skis for people who are paraplegic or quadriplegic is very limited. The aim of our project is to design a system that improves upon the current models of specialized water skis. Our intent is to create a waterski system that is structurally stable and handles responsively, in order to ensure that anyone is capable of effectively using our system to waterski.

The main client of our project is Quality of Life Plus, an organization that aims to aid veterans of the armed forces who have physical disabilities to still enjoy a good quality of life. …

Mechanical Prosthetic Hand For Navy Seal, Ryan Burke, Michael Friedman, Jose Lemus, Heather Martin

Mechanical Engineering

Quality of Life Plus has been improving the lives of many wounded servicemen and first responders around the country. Its mission is to foster and generate innovations to aid and improve the quality of life for those injured in the line of duty. This project is the fifth iteration of designing a prosthetic hand for an active duty Navy SEAL. The first iterations have been myoelectric systems where sensors are attached to the user’s muscles to actuate the prosthetic. However, the most recent has been a purely mechanical system, and was shoulder actuated. The design was more robust, it was …

Jonathan’S Natural Juices Mechanical Juice Dispenser, Andrew Meyer, Jesus Gutierrez, Danielle Lauinger

Mechanical Engineering

Team AJD was tasked with trying to create a juice dispenser that did not utilize pumps, but rather explore the venturi effect to see if it could be a suitable substitute. The venturi effect is when a fluid in a pipe goes through a gradual reduction in diameter in a pipe to increase the velocity and lower the pressure of a fluid. Utilizing this principle the team constructed a testing device to be able to run tests and verify the theory. The team was able to verify that the venturi effect was able to make juice at the correct mix …

'Fo Fighter: 2d Real-Time Game, Cary Dobeck

Computer Engineering

‘FO Fighter is a 2D real-time game for Android and iOS mobile devices. The game utilizes the motion sensors and touch screens built within these devices to give the player a great amount of control over their character’s position and firing direction. This control allows for a reactive environment set in outer space, where gravity is determined by the device’s orientation, while the player must dodge, fight and destroy multiple enemy fighters on each planet in the solar system. ‘FO Fighter has been tested throughout its development cycle on numerous devices on both the Android and iOS platforms, with testers …

Mobile Ftp Client: An Android Application, Eric Sobel

Computer Engineering

This project sets out to design and implement a mobile FTP client application for Android OS that accompanies a home media server using the Nas4Free operating system. The application utilizes Apache Commons’ .net Java library to perform three functions: connect remotely to an FTP server, browse through directory listings, and download single files or entire directories to the Android device. This senior project encompasses multiple concepts including the configuration of a network to allow external access to a server behind a firewall, understanding of SSL/TLS security including private key encryption and self-signed certificates, the FTP protocol and its associated commands, …

Seizure Tracker, Zachary Reardon

Computer Engineering

The goal of this project is to make a Module that enables anyone watching a person with disabilities to record any seizure that this person has under their care. Then when the Doctor/parent receives their patient/kid they are able to download all the seizures that their patient/kid had while they were away. The Doctor/parent then has the exact time, the duration of the seizure, and the type of seizure for all the seizures that have occurred while they were away from their patient/kid. From this data it is possible that the Doctor may see some sort of patterns that enables …

Wau: Location-Based Photo-Sharing And Friend-Finding Android Application, Tam P. Nguyen

Computer Engineering

Wau (Where are u?) is a location-based photo-sharing and friend-finding Android application. The basic concept of my app is to help people avoid the hassle of having to call/text their friends in order to know where they are. The ability to simply tap on a name and visually see their location in reference to your own would be a huge convenience. Another neat feature is that it allows users to take and upload pictures wherever they are, and the only way for anyone to see the picture is to be within the same vicinity that it was taken. I imagine …

Efficacy Of Replacing Ti Launchpad With Pyboard In Cpe 329 Curriculum, Anthony Miller, Dominic Romualdo

Computer Engineering

The goal of the current project was to determine if the PyBoard microcontroller is a suitable replacement for the Texas Instruments MSP-430 Launchpad in the Computer Engineering 329 Microcontrollers class at Cal Poly. The major projects from CPE 329 where attempted using the PyBoard in place of the MSP-430. The PyBoard was found to be a powerful and fairly capable platform for learning to develop embedded systems. Some of the benefits of the PyBoard were found to be it's ease of rapid prototyping, a fairly large collection of libraries with useful tools for microcontrollers, and many powerful abstractions that take …