Engineering Commons^™

Creation And Analysis Of Checklists To Improve Raquet Stringing Performance In Tennis Warehouse, Alston S. Nguyen

Industrial and Manufacturing Engineering

Tennis Warehouse has a need to increase the supply of strung racquets and man hours to complete these strung racquets over the course of a year. That is, the demand can be increased by up to 4 times its average load during certain hectic parts of the year (professional tournaments, holidays, and competitive seasons). Not meeting this demand can lead to upset customers, unnecessary waste and replacing of rushed items and shipping costs, and a discouraged customer service representative workforce. The objective of this project is to use a set of checklists to address this problem and attempt to increase …

Modeling And Test Of The Efficiency Of Electronic Speed Controllers For Brushless Dc Motors, Clayton R. Green

Master's Theses

Small electric uninhabited aerial vehicles (UAV) represent a rapidly expanding market requiring optimization in both efficiency and weight; efficiency is critical during cruise or loiter where the vehicle operates at part power for up to 99% of the mission time. Of the four components (battery, motor, propeller, and electronic speed controller (ESC)) of the electric propulsion system used in small UAVs, the ESC has no accepted performance model and almost no published performance data. To collect performance data, instrumentation was developed to measure electrical power in and out of the ESC using the two wattmeter method and current sense resistors; …

Characterization Of Electrophorectic Separations On A Cellulose Paper-Microfluidic Chip, Kyle Robert Fast

Master's Theses

The purpose of this thesis project is to demonstrate the ability to utilize electrophoresis in a cellulose paper microfluidic chip to manipulate charged particles. Materials were selected and a manufacturing protocol was created to successfully apply the electric field onto the paper chip. Experiments were performed to characterize the separation rates for charged, colorimetric dye, Orange G in the membrane as a function of an applied electric field, dye concentration, and distance traveled. The experiments confirmed that the electric field can be applied to the chip and particle separation rates were characterized. Next, the determined rates results were used to …

Rfid Microscope Lab, Patricia Carranza

Computer Engineering

The RFID Microscope Lab is a new exhibit created for the San Luis Obispo Children's Museum. The goal of the project is to create a modern, interactive exhibit that will teach children about different natural specimens through the use of technology. A computer, custom software, and RFID technology, will be used to display facts, microscopic images, and short videos of ten different specimens.

Sae Baja Dynamic Loading, Ryan Flatland, Christian George, Nick Bonafede

Mechanical Engineering

Cal Poly’s SAE Baja team undertook a project to measure the loads applied to an offroad buggy via the ground, including any obstacles. Originally, the ground loads pertaining to suspension, drivetrain, and chassis were based on rough estimates and historical part failures. This led to large safety factors, overbuilt parts, unknown part life, and improperly designed points of failure. In order for the team’s designs to advance to the next level of competition, an accurate set of loading cases were required. The main focus of the project was the suspension loads measured with strain gauges and a shock potentiometer, however …

A Hybrid Approach To General Information Extraction, Marie Belen Grap

Master's Theses

Information Extraction (IE) is the process of analyzing documents and identifying desired pieces of information within them. Many IE systems have been developed over the last couple of decades, but there is still room for improvement as IE remains an open problem for researchers. This work discusses the development of a hybrid IE system that attempts to combine the strengths of rule-based and statistical IE systems while avoiding their unique pitfalls in order to achieve high performance for any type of information on any type of document. Test results show that this system operates competitively in cases where target information …

An Investigation Into Partitioning Algorithms For Automatic Heterogeneous Compilers, Antonio M. Leija

Master's Theses

Automatic Heterogeneous Compilers allows blended hardware-software solutions to be explored without the cost of a full-fledged design team, but limited research exists on current partitioning algorithms responsible for separating hardware and software. The purpose of this thesis is to implement various partitioning algorithms onto the same automatic heterogeneous compiler platform to create an apples to apples comparison for AHC partitioning algorithms. Both estimated outcomes and actual outcomes for the solutions generated are studied and scored. The platform used to implement the algorithms is Cal Poly’s own Twill compiler, created by Doug Gallatin last year. Twill’s original partitioning algorithm is chosen …

Development Of Cpanel, An Unstructured Panel Code, Using A Modified Tls Velocity Formulation, Christopher R. Satterwhite

Master's Theses

The use of panel codes in the aerospace industry dates back many decades. Recent advances in computer capability have allowed them to evolve, both in speed and complexity, to provide very quick solutions to complex flow fields. By only requiring surface discretization, panel codes offer a faster alternative to volume based methods, delivering a solution in minutes, as opposed to hours or days. Despite their utility, the availability of these codes is very limited due to either cost, or rights restrictions.

This work incorporates modern software development practices, such as unit level testing and version control, into the development of …

Investigating The Correlation Between Freeway Service Levels And Freeway Service Patrol Assists, Nora Chin

Master's Theses

The Bay Area Metropolitan Transportation Commission’s (MTC) Freeway Service Patrol’s highway motorist response service is reporting a reduction in their service levels. We analyze the relationship between the reduction in the Bay Area Freeway Service Patrol’s (FSP) motorist assists and changes in vehicle miles traveled (VMT), California Highway Patrol (CHP) reported incidents, and cover research on the impact of new and old vehicle fleet turnover. VMT and CHP incidents have differential effects on FSP assists. Although incidents occurring on freeways with high traffic flows tend to cause more congestion, the trend in local VMT along Bay Area freeway corridors does …

Mapping Kinematic Functional Abilities Of The Hand To Three Dimensional Shapes For Inclusive Design, Samuel T. Leitkam, Laura Bix, Javier De La Fuente, Tamara Reid Bush

Industrial Technology and Packaging

Loss of hand function can have adverse effects on an individual's ability to maintain independence. The ability to perform daily activities, such as food preparation and medication delivery, is dependent on the hand's ability to grasp and manipulate objects. Therefore, the goal of this research was to demonstrate that three dimensional (3D) modeling of hand function can be used to improve the accessibility of handheld objects for individuals with reduced functionality through informed design. Individual models of hand functionality were created for 43 participants and group models were developed for groups of individuals without (Healthy) and with reduced functionality due …

The Influence Of Cu3(Btc)2 Metal Organic Framework On The Permeability And Perm-Selectivity Of Plla-Mof Mixed Matrix Membranes, Ajay Kathuria, Saleh Al-Ghamdi, Mohamad G. Abiad, Rafael Auras

Industrial Technology and Packaging

Poly(l-lactic acid) (PLLA) - 20% (w/w) and Cu₃(BTC)₂ metal organic framework (MOF) based mixed matrix membranes (MMMs) were fabricated by a vertical corotating twin screw microcompounder followed by an injection molding process. Water vapor, CO_2, O₂, and selected aroma mass transfer properties of PLLA and PLLA MMMs were evaluated. The CO₂/O₂ perm-selectivity of PLLA (α_CO2/O2) MMMs increased from 7.6 to 10.3 with the incorporation of 20% Cu₃(BTC)₂ MOF. Gravimetric permeability studies of trans-2-hexenal performed at 23°C and 50% RH indicated that permeability coefficient of PLLA MMMs …

Geotechnical Field Reconnaissance: Gorkha (Nepal) Earthquake Of April 25, 2015 And Related Shaking Sequence, Youssef M.A. Hashash, Binod Tiwari, Robb E.S. Moss, Domniki Asimaki, Kevin B. Clahan, D. Scott Kieffer, Doug S. Dreger, Amy Macdonald, Chris M. Madugo, H. Benjamin Mason, Menzer Pehlivan, Deepak Rayamajhi, Indra Acharya, Basanta Adhikari

Civil and Environmental Engineering

The April 25, 2015 Gorkha (Nepal) Earthquake and its related aftershocks had a devastating impact on Nepal. The earthquake sequence resulted in nearly 9,000 deaths, tens of thousands of injuries, and has left hundreds of thousands of inhabitants homeless. With economic losses estimated at several billion US dollars, the financial impact to Nepal is severe and the rebuilding phase will likely span many years. The Geotechnical Extreme Events Reconnaissance (GEER) Association assembled a reconnaissance team under the leadership of D. Scott Kieffer, Binod Tiwari and Youssef M.A. Hashash to evaluate geotechnical impacts of the April 25, 2015 Gorkha Earthquake and …

Comparison Of Beta Backscatter And X-Ray Fluorescence Methods To Measure Coating Thickness, Sergio Palomo, Bernice Mills

STAR Program Research Presentations

This work compares and assesses the effectiveness of beta backscatter (BB) and x-ray fluorescence (XRF) for measuring the thickness of gold coatings on two substrates: silicon and an iron-nickel alloy. A set of samples of known gold coating thickness, ranging from 0.5 – 4.0 microns, was measured in each case along with the substrate alone. In BB the number of electrons (beta particles from a very small radioactive source, Pm-147 in this case) backscattered from a sample in a fixed time period is counted. The XRF method uses x-rays generated in the sample from a primary x-ray beam of higher …

Design And Fabrication Of Liquid Scintillator Counter, Andrea Calderon Saucedo, John L. Orrell

STAR Program Research Presentations

Pacific Northwest National Laboratory (PNNL) is currently developing an ultra-low background liquid scintillator counter (ULB LSC) in the shallow underground laboratory. At a depth of 35-meters water-equivalent, the underground laboratory has a multi-layered shielding to keep out cosmic-ray induced background. The ULB LSC, which is located in a clean room facility, is a multi-layered design made up of various materials, including plastic scintillator veto panels, borated polyethylene, lead and copper. These layers help lower the contributions of the terrestrial background and intrinsic background, resulting from the impurities present in the materials, to the overall background count rate observed by the …

Radiographic Density Of Selected Materials At Different Thicknesses, Thien Quang Vu-Nguyen, Bernice Mills

STAR Program Research Presentations

X-rays are widely used in medicine and materials science to identify impurities or fractures within the target object. In material science, x-rays can be used to identify the thickness of samples with different material densities. The current method is to collect a radiograph using estimated conditions, evaluate the results, then make changes to the conditions. The residual image can be rescanned making it possible to obtain an image of lower radiographic density. By tabulating or graphing the effects of energy changes and rescans, a more informed choice of conditions is possible.

For this study, six materials were chosen with a …

Effect Of Surface Omniphobicity On Drying By Forced Convection, Madani A. Khan, Jeffrey Alston, Andrew Guenthner

STAR Program Research Presentations

Low energy surfaces can strongly repel both oil and water. Recently these surfaces have been fabricated on various substrates including fabric, aluminum, stainless steel and many other materials. In this experiment we explore the use of low energy surface deposition on aluminum alloy, stainless steel and silicon substrates, to enhance the drying rate of liquids removed from the surface by forced convection. We control surface roughness by substrate abrasion and by the growth of Al₂O₃ nanograss to enhance liquid repellence by use of a hierarchical texture. Liquid repellence of the substrates is measured by contact angles of …

Radiographic Density Of Selected Materials At Different Thicknesses, Thien Quang Vu-Nguyen, Bernice Mills

STAR Program Research Presentations

X-rays are widely used in medicine and materials science to identify impurities or fractures within the target object. In material science, x-rays can be used to identify the thickness of samples with different material densities. The current method is to collect a radiograph using estimated conditions, evaluate the results, then make changes to the conditions. The residual image can be rescanned making it possible to obtain an image of lower radiographic density. By tabulating or graphing the effects of energy changes and rescans, a more informed choice of conditions is possible.

For this study, six materials were chosen with a …

Designing A Remote Aerial System To Image And Analyze The Health Of Grape Crops At Cal Poly San Luis Obispo, Alexander D. Vice, Dylan Benton, Adipratnia Asmady, Andrew Mercier, Andrew Meyer, Eric Belfield, Aaron Drake

STAR Program Research Presentations

In the last decade the prevalence of unmanned aerial vehicles (UAVs) has exploded; however, the presence of UAVs in research situations is still a relatively new and untested field. The autonomous flight lab (AFL) at Cal Poly San Luis Obispo is a new lab site that is dedicated to using UAVs to benefit research for all backgrounds. Before AFL was able to fly missions we first needed to actually receive our vehicles, create a lab space that would provide all of the necessary resources and equipment necessary to fly, and to be granted permission by the Federal Aviation Administration (FAA) …

Assessing Functional Vasodilation In The Gracilis Collateral Arteriole, Megan T. Chu

Biomedical Engineering

Peripheral arterial occlusive disease (PAOD) involves arterial occlusion due to the formation of atherosclerotic plaques. It is suggested that intermittent claudication, the most frequent clinical presentation of PAOD, is caused by impaired vasodilation. Current treatments for PAOD are not directed at improving vascular reactivity and are often insufficient. Stimulating arteriogenesis in collateral arterioles has therapeutic potential for PAOD, but because arterioles are the primary site of blood flow resistance, it is important that these treatments do not impair collateral vasodilation. Before this can be evaluated, the effects of arteriogenesis on collateral function must be studied in untreated collaterals. There is …

Development Of Tools Needed For Radiation Analysis Of A Cubesat Deployer Using Oltaris, Marycarmen Gonzalez-Dorbecker

Master's Theses

Currently, the CubeSat spacecraft is predominantly used for missions at Low- Earth Orbit (LEO). There are various limitations to expanding past that range, one of the major ones being the lack of sufficient radiation shielding on the Poly-Picosatellite Orbital Deployer (P-POD). The P-POD attaches to a launch vehicle transporting a primary spacecraft and takes the CubeSats out into their orbit. As the demand for interplanetary exploration grows, there is an equal increase in interest in sending CubeSats further out past their current regime. In a collaboration with NASA’s Jet Propulsion Laboratory (JPL), students from the Cal Poly CubeSat program worked …

Wet Chemical Synthesis And Characterization Of Nanomaterials For Solar Cell Applications, Krystle N. Sy, Ramprasad Gandhiraman, Jessica E. Koehne

STAR Program Research Presentations

During long term space missions, it is necessary to have a reliable source of energy. Solar cells are an easy and reliable way to convert energy from the sun to electrical energy. NASA has used solar cells manufactured on Earth as an energy source for many of its missions. In order to develop technologies that will enable high efficiency solar cells, we are synthesizing nanostructured materials. A range of nanostructured materials, such as titanium dioxide nanowires, nickel nanoparticles, copper nanoparticles, and silver nanoparticles/nanowires, are synthesized. In this work, we are reporting on the synthesis of these nanomaterials and the electron …

Design Of A Non-Contact Home Monitoring System For Audio Detection Of Infant Apnea, Daniel T. White

Master's Theses

Infant apnea is a widespread condition in which infants fail to effectively breathe, and can lead to death. Clinical solutions exist for continuous monitoring of respirations in a hospital setting and requiring constant skin contact. This thesis investigates the construction of a proof of concept device that performs in-home monitoring without skin contact and with commonly available off-the-shelf components.

The device constructed used a directional microphone to detect breathing sounds, an omnidirectional microphone to detect ambient noise as a baseline to help isolate the breathing sounds, and LabVIEW software deployed on an inexpensive laptop computer to quantify incidents of apparent …

A Concept Validation Of A Magnetometry-Based Technology For Detecting Concealed Weapons In Vehicle Door Panels, Nar Vang

Master's Theses

Acts of insurgency have become an increasing threat resulting in extensive measures being taken by the law enforcement authorities to mitigate their devastating effects on human life and infrastructure. This thesis introduces a magnetometry-based information, and signal processing methodology for detecting concealed ferrous objects in vehicle body panels. From extensive literature research, it was observed that while magnetic sensors have been used in a variety of related applications, but they have not been extensively applied to the on-road detection of firearms and explosives concealed in vehicles. This study utilized an extensive experimental protocol for preliminary concept validation. The main idea …

Rating Rectangular Farm Delivery Meter Gates For Flow Measurement, Daniel J. Howes, Charles M. Burt

BioResource and Agricultural Engineering

Traditional meter gates for farm delivery flow measurement from an open channel conveyance have traditionally incorporated round canal gates (Armco type) for control. In recent years, some irrigation water agencies (i.e., irrigation districts) have replaced deteriorating round gates with lower-cost rectangular gates that cover round holes. Similar to the situation described in a companion paper, where round gates were examined, there have been no investigations into flow measurement uncertainty using the existing rating tables for these gates. In this study, two commonly used rectangular gate sizes, 0.46 m (18-in.) and 0.61 m (24-in.), were tested under scenarios of various gate …

Accuracy Of Round Meter Gates For On-Farm Deliveries, Daniel J. Howes, Charles M. Burt

BioResource and Agricultural Engineering

Recent California legislation requires irrigation water agencies larger than 25,000 acres to measure volumetric water deliveries within specified levels of relative uncertainty. Although the meter gate is one of the most widely used flow measurement devices in California, little investigation has been conducted into the accuracy, limitations, and uncertainties of the rating tables developed over 60 years ago. A meter gate testing facility was constructed at the Cal Poly Irrigation Training and Research Center’s Water Resources Facility capable of testing gates up to 0.76 m (30 in.). The facility was constructed with gates oriented perpendicular to the supply channel flow …

How To Save The World: One Life (And Uav) At A Time!, Natalie A. Wright

STAR Program Research Presentations

The proliferation of Uninhabited Aerial Vehicles (UAV’s) in commercial and public service aviation arenas has begun to gain the attention of many citizens. Popularized vehicles such as quadcopters have applications in aerial photography, small package delivery and hobbyist/consumer interests. Use of small-scale, fixed- and rotary-wing, remotely operated systems has been popularized as a result of such vehicles’ size and operational simplicity, which widens the range of application of this technology. Public service applications have the potential to advance emergency services management, which can substantially contribute to the public wellbeing. This research will examine the utility of multi-rotor systems in the …

Improving Flow Measurement Accuracy At Farm Delivery Gates In California, Charles M. Burt, Daniel J. Howes

BioResource and Agricultural Engineering

ITRC, through a CSU ARI grant, constructed a meter gate testing facility and tested five gates of various sizes and designs. The gate testing was conducted by varying the multiple parameters including upstream and downstream head, supply channel velocity, gate opening, and head above the gate. Data was also collected at various locations on the downstream side of the gate. In total, ITRC staff collected over 10,000 points of data during this evaluation. Using the new rating tables for the three gates examined, the relative uncertainty is less than ±5 to ±7% at the 95% confidence level with the new …

Jsish, Ryan Grasell

Computer Science and Software Engineering

For my senior project, I implemented Professor Keen’s JSish spec in C++. JSish is a subset of Javascript with support for execution from the command line and files.

I chose this project because I wanted to reinforce my programing language skills, learn C++, and gain a deeper understanding of garbage collection.

I quickly grew familiar with C++. My prior experience with both C and Java was a good enough introduction to let me hit the ground running. The biggest hurdle for me was the lack of garbage collection built into C++. I understood the principles of manual memory management, but …

Measuring Blood Flow In The Skeletal Muscle Microcirculation Using Laser Speckle Flowmetry, Kenneth Howard Gouin Iii

Biomedical Engineering

The presence of a native collateral circulation, which serves as a natural bypass for blood flow around an occlusion, improves prognosis for patients with ischemic diseases, such as peripheral arterial occlusive disease (PAOD). However, not all patients have a native collateral circulation, and animal models suggest a genetic basis for this variability. In mice, such as the BALB/c, that lack native arteriolar collaterals, neocollateral formation from capillaries that connect two arterial trees can occur after arterial occlusion, resulting in reperfusion of the ischemic watershed. Immature arterialized collateral capillaries (ACCs) at 7 days post arterial occlusion do not vasodilate in response …

Sram Compiler For Automated Memory Layout Supporting Multiple Transistor Process Technologies, Brandon Hilgers

Master's Theses

This research details the design of an SRAM compiler for quickly creating SRAM blocks for Cal Poly integrated circuit (IC) designs. The compiler generates memory for two process technologies (IBM 180nm cmrf7sf and ON Semiconductor 600nm SCMOS) and requires a minimum number of specifications from the user for ease of use, while still offering the option to customize the performance for speed or area of the generated SRAM cell. By automatically creating SRAM arrays, the compiler saves the user time from having to layout and test memory and allows for quick updates and changes to a design. Memory compilers with …