Engineering Commons^™

Energy Harvesting From Exercise Machines: Comparative Study Of Ehfem Performance With Dc-Dc Converters And Dissipative Overvoltage Protection Circuit, Cameron Kiddoo

Master's Theses

Energy Harvesting from Exercise Machines (EHFEM) is an ongoing project pursuing alternate forms of sustainable energy for Cal Poly State University. The EHFEM project seeks to acquire user-generated DC power from exercise machines and sell that energy back to the local grid as AC power. The end goal of the EHFEM project aims to integrate a final design with existing elliptical fitness trainers for student and faculty use in Cal Poly’s Recreational Center. This report examines whether including the DC-DC converter in the EHFEM setup produces AC power to the electric grid more efficiently and consistently than an EHFEM system …

Supercritical Carbon Dioxide Extraction, Kevin Carney

Master's Theses

The objective of this thesis is to explore the properties of supercritical carbon dioxide (CO₂). In addition, the feasibility of building a small-scale low cost system will be explained. A supercritical fluid is a fluid which exhibits properties between liquid and gas with liquid like densities and viscosities similar to a gas. Since the discovery of supercritical fluids in 1822, the use of supercritical fluids, specifically supercritical CO₂, has grown in popularity. The application of supercritical CO₂ has continued to grow in industrial applications since the 1970’s. Supercritical CO₂’s has many beneficial properties …

Rules Based Analysis Engine For Application Layer Ids, David Scrobonia

Master's Theses

Web application attack volume, complexity, and costs have risen as people, companies, and entire industries move online. Solutions implemented to defend web applications against malicious activity have traditionally been implemented at the network or host layer. While this is helpful for detecting some attacks, it does not provide the gran- ularity to see malicious behavior occurring at the application layer. The AppSensor project, an application level intrusion detection system (IDS), is an example of a tool that operates in this layer. AppSensor monitors users within the application by observing activity in suspicious areas not able to be seen by traditional …

Taruc: A Topology-Aware Resource Utility And Contention Benchmark, Gavin Baker, Chris Lupo

Civil and Environmental Engineering

Computer architects have increased hardware parallelism and power efficiency by integrating massively parallel hardware accelerators (coprocessors) into compute systems. Many modern HPC clusters now consist of multi-CPU nodes along with additional hardware accelerators in the form of graphics processing units (GPUs). Each CPU and GPU is integrated with system memory via communication links (QPI and PCIe) and multi-channel memory controllers. The increasing density of these heterogeneous computing systems has resulted in complex performance phenomena including nonuniform memory access (NUMA) and resource contention that make application performance hard to predict and tune. This paper presents the Topology Aware Resource Usability and …

Interactions Of A Counter-Rotating Vortex Pair At Multiple Offsets, Kyle Forster, Tracie J. Barber, Sammy Diasinos, Graham Doig

Aerospace Engineering

The interactions between two streamwise vortices were investigated by wind tunnel testing of two NACA0012 vanes at various lateral offsets. One vane was spaced 10 chord lengths (C) downstream of the other, with both at an angle of incidence of 8 degrees and a Reynolds number of 7 x 10⁴. The evolution of the vortex pair was observed until 6.5C behind the downstream vane using Particle Image Velocimetry (PIV). It was found that proximity of the upstream vortex to the downstream vane had a significant effect on the rotational rate of the subsequent vortex pair, with far offset …

Workplace Posture Assessment And Biofeedback With Kinect, Matthew Crussell

Master's Theses

With the prevalence of computing, many workers today are confined to desk within an office. By sitting in these positions for long periods of time, workers are prone to develop one of many musculoskeletal disorders (MSDs), such as carpal tunnel syndrome. In order to prevent MSDs in the long term, workers must employ good sitting habits. One promising method to ensure good workplace posture is through camera monitoring. To date, camera systems have been used in determining posture in a clean environment. However, an occluded and cluttered background, which is typical in an office setting, imposes a great challenge for …

Optimizing Control Of Shell Eco-Marathon Prototype Vehicle To Minimize Fuel Consumption, Chad Louis Bickel

Master's Theses

Every year the automotive industry strives to increase fuel efficiency in vehicles. When most vehicles are designed, fuel efficiency cannot always come first. The Shell Eco-marathon changes that by challenging students everywhere to develop the most fuel-efficient vehicle possible. There are many different factors that affect fuel efficiency, and different teams focus on different vehicle parameters. Currently, there is no straightforward design tool that can be used to help in Shell Eco-marathon vehicle design. For this reason, it is difficult to optimize every vehicle parameter for maximum fuel efficiency.

In this study, a simulation is developed by using basic vehicle …

Developing A Greenometer For Green Manufacturing Assessment, Ahmed H. Salem, Ahmed M. Deif

Industrial Technology and Packaging

In this paper a toolbox (Greenometer) to assess the greenness level of manufacturing companies is proposed. The assessment approach is based on capturing the relative greenness position of any company among other industries from different sectors as well as within the same sector. The assessment was based on selected greenness attributes and their composing indicators at each of the two levels of the developed Greenometer. Geometric Mean Method (GMM) was adopted to be the generic assessment technique for cross industries greenness evaluation, while Data Envelopment Analysis (DEA) was employed to assess the greenness level of intra-industries layer. Three different industrial …

Measurement And Analysis Of Transport Vibration For Ltl Freight Utilizing Stowage Optimization Equipment, Jay Singh, Koushik Saha, David Leinberger, John Antle

Industrial Technology and Packaging

The random vibration spectra typically used in lab based simulations towards developing and validating optimized packages for distribution have been developed through past research that have studied global transport vibration environments. Approximately 67% of all the freight tonnage moved in the U.S. utilizes heavy duty Class 8 trucks. While the floor (suspension) based vibration simulation profiles for these types of trucks are available towards lab based simulation, there have been no studies investigating the impact of shelving and stacking systems typically used for optimization of freight stowage in truck trailers by many freight companies. It is important to quantify how …

Temperature Effects On The Swelling And Bentonite Extrusion Characteristics Of Gcls, James L. Hanson, Nazli Yesiller, Everett P. Allen

Civil and Environmental Engineering

This investigation was conducted to evaluate effects of temperature on swelling and bentonite extrusion properties of GCLs. The swelling characteristics were determined using standardized test procedures and extrusion characteristics were determined using a new test method developed by the authors. Tests were conducted on a conventional medium-weight woven/nonwoven GCL. The range of test temperatures was 2 to 98°C (swelling tests) and -5 to 100°C (extrusion tests). The extrusion tests were conducted under stresses between 100 and 400 kPa and moisture contents between 50 and 150%. Temperature had significant effects on both swell and extrusion. The swell index ranged from 21 …

Liquid Force Kite Control System Design, Brendan Kerr, Brodie Sutherland, Alden Simmer

Industrial and Manufacturing Engineering

Kiteboarding is an ocean sport wherein the participant, also known as a kiter, uses a large inflatable bow shaped kite to plane across the ocean on a surfboard or wakeboard. The rider is connected to his or her kite via a control bar system. This control system allows the kiter to steer the kite and add or remove power from the kite, in order to change direction and increase or decrease speed. This senior project focused on creating a new control bar system to replace a control bar system manufactured by a kiteboarding company, Liquid Force. The current Liquid Force …

Creating The Foundation For A Startup: Design And Implementation Of A Database System For An Electrical Bicycle Rental Company, Alejandro Martinez

Industrial and Manufacturing Engineering

BoltAbout was started by 4 Cal Poly students, and their COO is a fellow Industrial Engineering student that I met during the first half of the senior project series class. He presented the project to me and I decided to work with him in developing this new database for his startup company. BoltAbout’s customer base is growing and current operations are not fit to meet the demand of a growing company. More specifically, their data management system can’t be used by all current employees to perform essential tasks such as rental processing, bicycle and equipment organization, and customer data analysis. …

A Study Into The Production Efficiency Of Cal Poly Chocolates, Fernando Calderon

Industrial and Manufacturing Engineering

The project objective was to: identify ways to reduce the production cost of Cal Poly Chocolates. The project was executed through the DMAIC approach, a data driven improvement cycle. Using several industrial engineering tools, six improvement opportunities were found. Three project deliverables were created and three process changes were recommended. The total annual savings, if recommendations are implemented, sum to $1700.

Evergreen: A Senior Project, Ashley Grover

Computer Engineering

No abstract provided.

Orfalea College Of Business Fire Safety Analysis, Garth Ornelas

Fire Protection Engineering: Culminating Experience Project Reports

The following report discusses the fire and life safety factors for the Orfalea College of Business Building located on the main campus of California Polytechnic State University in San Luis Obispo. The building functions are primarily administrative and academic in nature, with various lecture halls, offices, and labs located throughout the building. The Business Building was constructed in 1989 following the 1985 Uniform Building Code (UBC). For the purposes of this report, the building will be evaluated using the 2015 International Building Code, NFPA Life Safety Code Handbook (Thirteenth Edition), SFPE Handbook (4th and 5th Editions), and the NFPA handbooks …

Wistron Greentech, Mckinney, Tx- Life Safety Evaluation, Charles R. Cates

Fire Protection Engineering: Culminating Experience Project Reports

A fire protection and life safety review of the Wistron GreenTech facility in McKinney, TX is performed. The facility was reviewed from both a prescriptive (building code) and performance based design per the codes summarized in the report. The prescriptive fire and life safety systems analyzed where the following: Building Code Analysis Including but not limited to: Occupancy classifications, Occupancy separations, Building height and areas, Type of construction, Fire resistive construction, Means of egress, Fire Alarm and Detection Systems, Automatic Fire Sprinklers & Water Supply, Special Hazards, Emergency Planning and Preparedness The prescriptive requirements in general where met, the exceptions …

Fire And Life Safety Report Orfalea College Of Business, Sulaiman Almohammadi

Fire Protection Engineering: Culminating Experience Project Reports

A comprehensive fire and life safety analysis was performed on the Orfalea College of Business. The report covers the prescriptive analysis of the building and the performance-based design analysis. The prescriptive analysis includes assessment of the relevant codes for egress system, water-based suppression system, alarm and detection system, and structural fire protection. The egress analysis under the Life Safety Code 2015 found the building meets the requirements of occupant load to exceed exit capacity, number of exits and its location, travel distances. Four rooms on the second floor that have not met the common path of travel distances limits were …

Iota Pi Application For Ios, Deborah Newberry

Computer Science and Software Engineering

Kappa Kappa Psi is a national honorary fraternity for college band members. They meet every Sunday night, and during these meetings they plan events (both internal and external) that aim to meet our goal of making sure that the Cal Poly band programs have their social, financial, material, and educational needs satisfied. This paper details the steps I took to create an application for them to use internally to help ease organizational processes.

Corgi: Compute Oriented Recumbent Generation Infrastructure, Christopher Allen Hunt

Master's Theses

Creating a bicycle with a rideable geometry is more complicated than it may appear, with today’s mainstay designs having evolved through years of iteration. This slow evolution coupled with the bicycle’s intricate mechanical system has lead most builders to base their new geometries off of previous work rather than expand into new design spaces. This crutch can lead to slow bicycle iteration rates, often causing bicycles to all look about the same. To combat this, several bicycle design models have been created over the years, with each attempting to define a bicycle’s handling characteristics given its physical geometry. However, these …

Off Grid Solar Array, Courtney Elliott

Electrical Engineering

No abstract provided.

Energy Harvesting From Exercise Machines: Buck-Boost Converter Design, Andrew E. Forster

Master's Theses

This report details the design and implementation of a switching DC-DC converter for use in the Energy Harvesting From Exercise Machines (EHFEM) project. It uses a four-switch, buck-boost topology to regulate the wide, 5-60 V output of an elliptical machine to 36 V, suitable as input for a microinverter to reclaim the energy for the electrical grid. Successful implementation reduces heat emissions from electrical energy originally wasted as heat, and facilitates a financial and environmental benefit from reduced net energy consumption.

Uhf Rfid Antenna Impedance Matching Techniques, Kamron Sockolov

Master's Theses

Radio Frequency Identification (RFID) systems use electromagnetic signals to wirelessly identify and track RFID-tagged objects. A reader transmits a carrier wave request signal to an RFID tag, which then transmits a unique identification signal back to the reader. Applications include supply chain inventory management, automated toll booth fee systems, sports event timing, restricted access control, pet monitoring and retail theft prevention. An RFID tag includes an antenna connected to a Radio Frequency Integrated Circuit (RFIC). RFID tags in the ultra-high frequency (UHF), industrial, scientific and medical (ISM) 902-928MHz band and global Electronic Product Code (EPC) 860‑960MHz band are powered passively …

Fluid Flow Characterization And In Silico Validation In A Rapid Prototyped Abdominal Aortic Aneurysm Model, Dean Thomas Wampler

Master's Theses

Aortic aneurysms are the 14^th leading cause of death in the United States. Annually, abdominal aortic aneurysm (AAA) ruptures are responsible for 4500 deaths. There are another 45,000 repair procedures performed to prevent rupture, and of these approximately 1400 lead to deaths. With proper detection, the aneurysm may be treated using endovascular aneurysm repair (EVAR). Understanding how the flow of the blood within the artery is affected by the aneurysm is important in determining the growth of the aneurysm, as well as how to properly treat the aneurysm. The goal of this project was to develop a physical construct …

College Cloud: Web Development With A Django Stack And Google Cloud, Evan Joseph Hench

Computer Science and Software Engineering

Students at Cal Poly run into two main problems involving clubs: efficiency of communication and the ability to find clubs that interest them. Currently, members of clubs communicate in four main ways: Facebook, GroupMe, text message, and email. As a result, it is fairly easy for things to become disorganized from all the different types of communication. Group members are forced to check multiple communication outlets just to stay updated, wasting their time. In addition, finding clubs at Cal Poly is not easy. The annual club fair helps interested students to some degree, but with hundreds of clubs on campus …

An Analysis Of The Benefits In Estimating At Different Pipe Union Labor Rates, A.J. Chamorro

Construction Management

This paper is an analysis of the costs and benefits of estimating at different union labor rates, based on the location of the project and which jurisdiction the project falls in. The basis of the research is a case study of a Bay Area mechanical contractor (Contractor X) which previously estimated at a single labor rate, and recently developed variable estimating. Through that case study, best practices are developed for union pipe trade estimating. The results of the case study show that estimating protocol should be determined on a project by project basis, and company resources and manpower have to …

Aei Student Design Competition: Texas Tech Sports Performance Facility, Jacob G. Kockrow

Construction Management

The AEI Student Competition is an annual event that pushes students in the disciplines of engineering and construction management to collaborate and demonstrate creative solutions to the challenges presented. This year, the competition is focused on the new Texas Tech Sports Performance Sports Facility located in Lubbock, Texas, where they tore down the existing building and are in the process of completing the new facility. Instead of recreating the plans given, we designed a brand new building to meet the project requirements, which included a $48 million budget and a 34-month construction duration. As the Construction Manager for the project, …

Roman Catholic Elementary Photovoltaic Project, Joe Gugale

Construction Management

The use of photovoltaic panels in construction is rapidly growing all around the world. This paper summarizes the findings of a student-based project in Belize that was installed December 2016. The San Pedro Roman Catholic Primary School is the largest school on the island of Ambergris Caye, Belize with over 700 students in 22 classrooms ranging from Kindergarten to 8th grade. Although the school has power supplied from the local electrical utility, power outages occur frequently and the cost of electricity is considerable.

The project had several issues related to preparing the design, acquiring the materials and equipment, and developing …

Implementing Occupancy Sensor Lighting Controls In Cal Poly Cic Lab Classrooms, Mitchell Packard

Construction Management

Occupancy sensors are lighting control devices that automatically turn lights on when they detect motion, and off when motion is not detected for an allotted time period. These sensors can be applied virtually anywhere, indoor or outdoor, and can provide substantial energy savings. One application that does not utilize occupancy sensors often enough is classrooms. Cal Poly currently utilizes an outdated toggle switch system that students do not maintain properly, wasting a large quantity of energy. This paper will examine the maintaining of the current lighting control system in Cal Poly’s Construction Innovation Center (CIC) lab classrooms; the operating cost …

Implementing A Working Bim Model Halfway Through A Public Cm Multi-Prime Project: A Case Study, Jim Roth

Construction Management

The development of a BIM (building information model) model is a standard practice in today’s construction world. While the process of model adoption nearly has a written formula, implementing a BIM model in the midst of a project is a rare occurrence. This paper will examine the implementation of a working BIM model halfway through a public multiple prime contractor project managed by a construction manager (CM) in California. The project cost is roughly $20 million and of moderate complexity. This paper will outline the factors leading up to the ultimate decision of creating a working model, the process of …

Investigation Into Feasibility Of Off-Grid Small Dwelling In Slo County, Sam Labberton

Construction Management

The trend towards green, sustainable living has grown more and more in the housing industry each year since before the turn of the century; solar in the last decade alone has grown by 60% (http://www.seia.org/research-resources/solar-industry-data). Living on a grid that runs on unclean sources of energy already has led us into an environmental disaster some call irreversible. This paper takes a detailed look into the feasibility of a small, off-grid, dwelling that utilizes modern technology in order to live more modestly. In conjunction with great advancements in solar technology along with energy storage such as deep cycle lead-acid batteries, on-site …