Engineering Commons^™

Implementing Net Zero Energy Into The Construction Innovations Center, Marlo Arleen Castro

Construction Management

As the environmental status of our planet declines, it is becoming more and more important for the construction industry to adapt. Leadership in Energy and Environmental Design (LEED) is becoming an unspoken requirement for all new and tenant improvement construction, and now, with the goal of Net Zero Energy (NZE) for all new commercial buildings by 2030, NZE is becoming the way of the future. As of late, California Polytechnic State University in San Luis Obispo (Cal Poly) has made grand efforts to retrofit several of the older buildings on its campus in order to achieve LEED certification. One of …

Information Communication Improvements In B.I.G., Alexander M. Vlasity

Construction Management

Game based learning is a proven methodology of convening complex ideas and concepts to students. Game based learning creates an environment that is safe, enjoyable, stress free, and competitive. Construction management is no exception. In the classroom, there is only one way to provide real life experiences in creating and operating a business. That is through simulation software. Simulation software allows a user to experience many of the complexities that occur in real life while playing in an educational environment. This senior project will focus on one software package called The Building Industry Game. This simulation package provides its user …

Integrated Design-Bid-Build And Its Effects On Integrated Project Delivery Drivers, Alexander G. Sargiss

Construction Management

Integrated project delivery is becoming a more common and successful delivery method in the construction industry compared to more traditional methods such as design-bid-build. Integrated Design-Bid-Build is a hybrid between the two which has been implemented very few times to test if it can be used as a more viable delivery method in the future. There has been very little research in to Integrated Design-Bid-Build that is accessible for analysis. This research study examines case studies of projects completed using IPD and analyzes their “IPD Profiles” which are measured using five primary project drivers. These project drivers are: cost predictability, …

National Association Of Home Builders' Residential Construction Management Competition Guidebook, Eric Angelo Bet

Construction Management

With today’s universities, especially Cal Poly, stressing the concept of “Learn by Doing” to prepare students for successful careers, case competitions are gaining popularity and prestige amongst recruiters. By working well in team settings and showcasing one’s knowledge in front of a panel of industry judges, case competitions give students great undergraduate experience and confidence once they begin their full-time careers. One of these case competitions is the National Association of Home Builders (NAHB) Residential Construction Management Competition (RCMC). The NAHB RCMC asks students to create a fully-encompassing development proposal on a real-world site located in the United States. This …

Case Study Analysis Of Improving Productivity Rates For Self-Perform Concrete, Johnny Mcdermott

Construction Management

Productivity is one of the most important aspects of a successful construction project, especially if the work is self-performed and not sub-contracted out to another contractor. Usually the success of a project is directly correlated to how well the production has been throughout the course of the job. Often when a project manager notices their job is not doing well and not making their target profits or man-hours, productivity is usually the answer to that problem. This paper will examine the different ways and methods of tracking production that was used by Overaa construction. The focus of this study is …

Journeyman International: Hut2hut, Rwanda, Faith E. Johnson

Construction Management

This report details the project titled Hut2Hut, completed through the nonprofit humanitarian design organization, Journeyman International. Hut2Hut is a housing project designed to provide lodging for tourists backpacking through Rwanda. The structure is designed to house up to eight people. Features include an enclosed bunk space, a kitchen with basic appliances, wood-burning fireplace, collapsible wall-deck system to open up the living space to the outside, and two main outdoor deck spaces. The building will provide an affordable alternative to the more expensive resorts in Rwanda and aims to connect the visitors to the site and local culture. The proceeds will …

Preliminary Investigations Into Selective Laser Melting, David Takeo Otsu

Master's Theses

Selective laser melting is a promising metallic additive manufacturing process with many potential applications in a variety of industries. Through a gracious donation made by Lawrence Livermore National Laboratory, California Polytechnic State University received and installed an SLM 125 HL selective laser melting machine in February 2017. As part of the initial setup effort, a preliminary machine verification study was conducted to evaluate the general print quality of the machine with default parameter settings. Coincidentally, the as-printed microstructure of SLM components was evaluated through nil strength fracture surface examination, an alternative to conventional polish-and-etch metallography. A diverse set of components …

Baserock Bluetooth: Bi-Directional Bluetooth And 3.5 Mm Headphone Jack Compatibility Device, Jonathan A. Falco

Electrical Engineering

This project was proposed by a startup company from downtown San Luis Obispo called BaseRock. BaseRock sells a backpack containing subwoofers to allow the user to feel low frequencies of music. It is intended for concerts or personal use, listening to songs on an MP3. The main way the BaseRock backpack communicates with MP3s is via the headphone jack. With the introduction of the Apple iPhone 7 in September of 2016, BaseRock realized it was at a disadvantage. Millions of iPhone 7 owners and potential customers around the globe would no longer possess a headphone jack. BaseRock needs a Bluetooth-to-headphone …

Portable Dac And Headphone Amplifier For High Impedance Headphones, Kevin V. Thai

Electrical Engineering

The following paper contains an in-depth report on the design process of a portable DAC and Amplifier for high impedance headphones. The project brings portability into an audiophile’s world. This portable DAC and Class D amplifier takes USB data from a phone, converts it to analog, and amplifies the signal for high impedance headphones. First, the document contains motivations for the project: such as the necessity for such equipment, and who would use this product. Next, discussions of marketing considerations and customer needs bring together specifications. After, the report examines the project plan, overall functionality blocks, and estimated costs. Finally, …

The Natural Aging Behavior Of Open-Die-Forged 7050 Aluminum Alloy, Casey J. Madsen, Joseph J. Redfearn

Materials Engineering

The aging response of open-die-forged 7050 aluminum was studied at various temperatures. This is of interest because the alloy can potentially crack during stress relief if it ages after its heat treatment. Natural aging limits the ductility enough to potentially cause cracking and is combatted by placing the forgings in freezers. This experiment shows which temperatures successfully inhibit aging in the forgings. The goal was to develop a maximum time that a sample can be stored at certain temperatures before the forgings have naturally aged. The samples were first solution heat treated then water-quenched. Next, the samples were stored at …

Kinked Tensile Behavior Of Cold Worked Nitinol, Grant R. Caraway, Samuel J. Canovas

Materials Engineering

To characterize the decrease in ductility caused by an induced stress concentration as a function of various levels of cold work and heat treatment, Nitinol medical guide wires with a .004″ diameter were tested using both a standard, straight tensile test and a modified, bent tensile test. The ratio of the two break loads (bent:straight) for identically processed samples was used as a proxy for measuring the ductility of the guide wires: the higher the ratio, the more ductile the sample. The average break load ratio as a function of increased cold work, decreased from 1.27 to 0.91 for the …

Qualification Of Blue Laser Cutting Tool And Design Of Test Procedure For Determining Cutting Parameters, Gaia Righi

Materials Engineering

No abstract provided.

Invariant-Based Method For Improving Efficiency Of Mechanical Testing In Aerospace Certification Of Carbon Fiber-Epoxy Composites, Alyssa Rina Gruezo, Erika Gabrielle Hansen

Materials Engineering

The current challenge with qualification of carbon fiber composites in the aerospace industry would be the low efficiency of testing hundreds of samples. The Trace Theory strives to streamline the qualification process by utilizing a material’s Trace to predict properties of composites using Excel programs and basis data. To test this theory, predicted properties from the program, QuickLam, were compared to experimental data. Unidirectional 0° (T1), unidirectional 90° (T2), quasi-isotropic (T3), and hard quasi-isotropic (T4) laminates were made using HexTowR carbon fiber and TC250 resin provided by TenCate Advanced Composites. Tensile and compression tests were done according to ASTM D3039 …

Orfalea College Of Business- Fire & Life Safety Analysis, Napoleon E. Nino

Fire Protection Engineering: Culminating Experience Project Reports

This report details the prescriptive and performance based analyses performed on the Orfalea College of Business building, located on the Cal Poly San Luis Obispo campus. Designed in accordance with the 1985 Uniform Building Code (UBC), this building is evaluated for compliance with the requirements prescribed under relevant codes in place as of 2016. The main function of this building is to serve both academic and administrative purposes, including classrooms and staff offices. Aspects of the building analyzed include: Egress Systems, Structural Fire Protection, Smoke Management, Fire Detection, Fire Notification, and Fire Suppression The prescriptive analysis demonstrates the lack of …

Lax Continental Grand- Fire Protection And Life Safety Analysis, Aden Malek Stepanians

Fire Protection Engineering: Culminating Experience Project Reports

A prescriptive analysis of the project building was conducted using the 2016 California Building & Fire Code along with current codes and standards pertaining to specific elements. Encompassed in this analysis is a review of the project building’s structural fire protection, water-based suppression systems, fire detection and alarm systems, smoke control and occupant egress.

Void of construction documentation, the analysis of the structural fire protection of the building was determined by evaluating the current design and use. The restricting factor that determine the construction type was the assembly use on the 6th floor. Other than Type I construction, assembly use …

Design For Waste Reduction And Efficiency Improvement For The Construction Usage Of The Tower Crane, George Merida, Roman Richard

Industrial and Manufacturing Engineering

Webcor Concrete Group’s on-site tower crane is currently experiencing unknown forms of inefficiency. The project team used the DMAIC methodology to implement Define, Measure, Analyze, Improve, and Control in order to guide and structure the project. After the project team formulated a problem statement, observations were collected of tower crane deliveries resulting in 470 individual data points. The data was then analyzed using basic statistics, histograms, and lean manufacturing tools in order to identify wastes and inefficiencies. Once the wastes and inefficiencies were identified, root cause analysis was performed. The identified root causes were then used as the basis for …

Designing An Information System To Efficiently Coordinate Film Screenings, Galen Dougherty

Industrial and Manufacturing Engineering

This paper explains the engineering concepts design efforts used to build an information system to efficiently coordinate film screenings. The market served is an emerging group of film makers and production companies that have limited resources. The application aims to save both time and money in coordination efforts for screening films in the local community. The project case examined is a small production start-up from Cal Poly San Luis Obispo named Yellow Glass Media. The design described in the paper specifically targets their needs which are assumed to be representative of the needs of the larger emerging market. The design …

Low-Cost Jetting System; Space And Naval Warfare Systems Command (Spawar), Carson B. Bush, Daly Sombat, Charles J. Kleeman

Mechanical Engineering

SPAWAR, a research and development side of the U.S. Navy, needed a way to bury classified payloads below the seafloor in order to anchor the devices. They currently use a jetting system that costs around $20,000 to do it, and they desired a cheaper system capable of performing the same tasks. SPAWAR presented the project to Cal Poly Mechanical Engineers as a senior project in the fall of 2016.

The design team that decided to take on the project was interested in creating the system with two key factors in mind in order to make the device less expensive.

1. …

Avalon Submersible Support Structure: Final Project Report, Alexandra Mililani Zaragoza, Octavio Mendoza, Austin Scott Eslinger

Mechanical Engineering

The MBMM, represented by our sponsor Bob McCay, is currently looking for a new way to support the Deep Submergence Rescue Vehicle (DSRV), Avalon, that they have on display. The DSRV is currently sitting on a Short Haul Vehicle (SHV) trailer and the total weight (32 tons) is currently being supported by the SHV’s tires. This is a source of concern for the MBMM due to the weathering the tires have undergone combined with the amount of time that they have been supporting the weight. The MBMM is looking for a support structure that will take the weight off of …

Cal Poly Supermileage Steering System, Lucas S. Rybarczyk, Sean K. Michel, Giovanni P. Murillo

Mechanical Engineering

The following report outlines the full design process that the senior project team went through to develop a steering system for the 2018 Cal Poly Supermileage vehicle from the development to the manufacturing and testing of the senior project steering system. The team was successful in reducing the weight of the steering system from 12.64 to 5.85 pounds while remaining within the cost budget provided for the Cal Poly Supermileage team. The new steering system initially failed drop testing which resulted in the uprights pulling out of the bottom carbon supports. This failure was repaired with a small redesign to …

Mini High Temperature Test Unit Final Design Report, Kevin Liu, Juan P. Castillo

Mechanical Engineering

Lawrence Livermore National Laboratory has invested considerable effort to develop new standard for nuclear grade HEPA filters that can withstand high temperatures along with methods to optimally test not only the experimental filter media, but also new frame seals and media binders. Therefore, LLNL in collaboration with Cal Poly has designed and built a Mini High Temperature Testing Unit (MHTTU) to recreate conditions observed during a fire and to test different materials in an effective, inexpensive, regulated and reliable method. The existing prototype was unable to achieve the ideal testing conditions of 1000°F air at the low flow rates of …

Marine Gastrobot Final Design Report, Wesley B. Williams, Eric Kane Dreischerf, Tommy Nicholas Yath

Mechanical Engineering

The Marine Gastrobot sponsored by Dr. Christopher Kitts of the Cal Poly Center for Applications in Biotechnology was a research and development effort intended to explore the use of microbial fuel cell technology as a power source for underwater robots. Our team Ocean Locomotion succeeded in developing a first iteration of an underwater robotic platform suitable for microbial fuel cell integration. The primary feature of the design is its sinusoidal fin propulsion intended for benthic exploration with limited risk of entanglement. During the course of development, Ocean Locomotion explored the use of low power actuation methods and determined their limited …

Water Fun At Exploration Station, Nicholas M. Runyan, Heriberto Rodriguez, Raymond F. Morales, Alejandro M. Gonzalez-Smith

Mechanical Engineering

This report documents the design and fabrication processes involved for the creation of an interactive science exhibit for the Grover Beach Exploration Station. This is a student-led senior project advised by Sarah Harding, professor of mechanical engineering, as a part of California Polytechnic State University in San Luis Obispo’s mechanical engineering program. The final product is a fully functioning, durable system that is capable of pumping and recycling water throughout use when users are in its vicinity.

The exhibit is to be considered in 4 main subsystems: basin, plumbing, frame, and sleep mode system. A fiberglass basin that holds all …

Grey Water Capture, Paul B. Brenneman, Vicente J. Ramirez, Kevin J. Alexander

Mechanical Engineering

Many households today do not implement any kind of grey water recycling system. People do not get a grey water system for a variety of reasons; the benefits could be unknown, the uses for grey water could be limited in their specific home, or the economic gain is too minimal to constitute a modification to the house.

For our project, we are going to design an easy to install product that enables the reuse of grey water from household sources. Examples of our final product could be something that lets the customer use grey water from the bathroom sink to …

Reliability Test Fixture For Flexible Hybrid Electronics, Julia Akiko Roche, Maya Francesca Zumel Manzano, Paul Alfred Swartz

Mechanical Engineering

During the 2016-2017 school year, the Cal Poly NextFlex Group, in conjuncture with the Cal Poly Industrial and Manufacturing Engineering Department, was comprised of professors, undergraduate students, and graduate students all working towards the manufacturing of flexible hybrid electronics (FHEs). FHEs, which are comprised of a flexible plastic substrate (thermoplastic polyurethane), screen-printed silver ink, and a thin silicon wafer, have a wide range of potential applications. At the time of this project, FHEs and other flexible electronics did not have a set of test standards to characterize their mechanical and electrical properties. The Cal Poly NextFlex Group recruited three Cal …

Vortexing Off A Common Suction Header, Ryan J. Caceres, Brett R. Langlois, Brian H. Greenberg

Mechanical Engineering

This project is the first iteration of a testing rig to determine the critical submergence of a vortex off a main suction header. The rig was designed with supplies purchased and provided by PG&E, including 4-6” schedule 40 PVC pipe and fittings, a large water tank, a pump, and a flowmeter. PG&E at Diablo Canyon Power Plant presented their problem to the Cal Poly Mechanical Engineering Senior Project class, and three mechanical engineers took up the project. The following report details the ideation, design, build, and test processes used during the 2016-17 academic year to create the vortex testing rig. …

Air Bubble Curtain Anchoring, Christian J. Young, Donavan Wesley Lawrence, Dakota Catherine Schwartz

Mechanical Engineering

To prevent salp (jellyfish) from entering Diablo Canyon Power Plant’s intake pipes, and ultimately having the plant shut down as a result, an air bubble curtain is anchored along the ocean floor for the duration of the salp swarm to create a barrier that prevents the salp and other debris from entering the intake. The curtain consists of four large air compressors connected to four parallel pipes with holes strategically drilled at various places along the length of the pipe. When the air compressors are turned on, a torrent of bubbles are shot out from the pipes which create a …

A Data-Driven Approach To Cubesat Health Monitoring, Serbinder Singh

Master's Theses

Spacecraft health monitoring is essential to ensure that a spacecraft is operating properly and has no anomalies that could jeopardize its mission. Many of the current methods of monitoring system health are difficult to use as the complexity of spacecraft increase, and are in many cases impractical on CubeSat satellites which have strict size and resource limitations. To overcome these problems, new data-driven techniques such as Inductive Monitoring System (IMS), use data mining and machine learning on archived system telemetry to create models that characterize nominal system behavior. The models that IMS creates are in the form of clusters that …

Development And Characterization Of Tissue Engineered Blood Vessel Mimics Under "Diabetic" Conditions, Shelby Gabrielle Kunz

Master's Theses

The development of tissue engineered blood vessel mimics for the testing of intravascular devices in vitro has been established in the Cal Poly tissue engineering lab. Due to the prevalence of cardiovascular disease in diabetic patients and minimal accessible studies regarding the interactions between diabetes and intravascular devices used to treat vascular disease, there is a need for the development of diabetic models that more accurately represents diabetic processes occurring in the blood vessels, primarily endothelial dysfunction. This thesis aimed to create a diabetic blood vessel mimic by implementing a high glucose environment for culturing human endothelial cells from healthy …

Using Computer Vision To Build A Predictive Model Of Fruit Shelf-Life, Nandan G. Thor

Master's Theses

Computer vision is becoming a ubiquitous technology in many industries on account of its speed, accuracy, and long-term cost efficacy. The ability of a computer vision system to quickly and efficiently make quality decisions has made computer vision a popular technology on inspection lines. However, few companies in the agriculture industry use computer vision because of the non-uniformity of sellable produce. The small number of agriculture companies that do utilize computer vision use it to extract features for size sorting or for a binary grading system: if the piece of fruit has a certain color, certain shape, and certain size, …