Engineering Commons^™

Ac Direct Drive Led Lighting Using Low Cost Analog Components, Miles Head

Master's Theses

This project explores the rapidly expanding area of AC direct drive for LED lighting. AC LED driving does not use typical DC-DC converter-based driving but uses semiconductor switches and a linear regulator to activate a number of LEDs proportional to the input voltage at any given time. This allows bulky, expensive magnetics to be eliminated from the system. The goal of this project was to design a scaled-down physical AC LED direct drive system to validate the conclusions of methods for improving efficiency from a previous investigation that found minimizing voltage across the linear regulating MOSFET led to higher efficiency …

Usb-C Power Adapter For Dc House Project, Tyler G. Starr, Ezzeddeen Gazali

Electrical Engineering

Despite the importance of electricity and the impact it has on our daily lives, many people around the world still live without this essential utility today. According to the International Energy Agency (IEA), approximately 1.1 billion people in the world did not have access to electricity in 2017. The DC House Project at Cal Poly aims to provide electricity to people living in rural areas by directly utilizing DC energy generated from renewable or human powered sources without the need for DC-AC conversions. However, one significant issue is the lack of a standardized DC wall socket. Standards for AC wall …

Autonomous Vehicles Operating Collaboratively To Avoid Debris And Obstructions, Toan T. Le, Cole W. Oppenheim, James H. Gildart, Kyle M. Bybee

Mechanical Engineering

The purpose of this project is to demonstrate the safety and increased fuel efficiency of an automated collision avoidance system in collaborative vehicle platooning. This project was cosponsored by Daimler Trucks North America headquartered in Portland, Oregon, as well as Dr. Birdsong, and Dr. DeBruhl of Cal Poly. The mechanical engineering team consists of Cole Oppenheim, James Gildart, Toan Le, and Kyle Bybee who worked in coordination with a team of computer engineers. Vehicle platooning is a driving technique to increase the fuel efficiency of a group of vehicles by following a lead vehicle closely to reduce the drag experienced …

Adjustable Seating Systems, Grace Timken, Zachary Dworaczyk, Jasper Lewin, Eric Voss

Mechanical Engineering

The Adjustable Seating Systems team designed and prototyped a collapsible and nestable seat for use in transit vehicles to create more free space for more passengers and cargo. Our team is the second senior project group to have worked at solving this problem. The previous team established a unique seat folding method that is currently pending patent approval. Our team’s responsibility was to improve the ease of use and overall hardware design of the entire seating system. This document captures the efforts that our team has performed to organize an approach to completing a full design and working prototype this …

Danny’S Recumbent Bike Accessibility Device Final Design Report, Joseph J. Lee, Huy Nguyen, Jack Mcatee, John Kulick

Mechanical Engineering

The purpose of this document is to fully define our design solution and explain our manufacturing and testing results. Our project’s goal is to find a way to allow Danny Knutson, a retired Navy pilot and incomplete quadriplegic with limited use of his arms and an impaired sense of balance, to enter and exit his recumbent tricycle without any discomfort for him or his aide. We completed multiple interviews with Danny, patent research, existing product research, and other technical literature research in order to fully understand the problem. We synthesized this information to create a concrete list of customer wants …

High Strollers, Braeden Hammond, Morley Perrin, Reid Bartels, Juan Rodriguez

Mechanical Engineering

This report documents the final product of Jonathon’s new lightweight stroller. The Mechanical Engineering team from Cal Poly, High Strollers, began the project to create a lightweight stroller for the project sponsor, Nina Aguayo, and her son, Jonathon Aguayo, in Fall of 2018. Jonathon is diagnosed with Delayed Brain Development and Hypotonia with some characteristics of Cerebral Palsy. He has a 50lb high intensity stroller to go to and from school. Mrs. Aguayo needed a stroller that is easier to transport while still meeting all of Jonathon’s needs. The re-designed stroller will make leisurely outings for Mrs. Aguayo and Jonathon …

Go With The Flow, Scott Weinhardt, Priscilla Ng, Ben Rydberg, Ritika Makhijani

Mechanical Engineering

This Final Design Review (FDR) report outlines the Fuel System Flow Analysis senior project completed by the presenters listed. Included is research about Solar Turbines’ needs, and objectives for our project, our design decision process and final design, manufacturing, design verification report, final results, and suggestions moving forward with this experiment. The goal of the project is to identify stable pressure fields throughout the Solar Turbines fuel delivery system. Specifically, the optimal placement for taking measurements downstream of the main and pilot fuel control valves. The data is used to validate the accuracy of computational fluid dynamic (CFD) models that …

Universal Bike Suspension Design, Ernesto Huerta, Gregory Ryan Ritter, Chris Michael Fedor, Michael Wu

Mechanical Engineering

Cal Poly Bike Builders (CPBB) is a student club at Cal Poly helping students design and fabricate their own bicycles. Currently, club members build rigid frames and mountain bikes with only front-suspension–commonly referred to as a “hardtail”. As more students join the club, interest grows in building full-suspension mountain bikes (FSMTB). Designing and manufacturing a mountain bike rear-suspension system requires a diverse skillset and a substantial time commitment. As a result, individual efforts building FSMTB have proven unsuccessful. The scope of this project is to develop a defined method and necessary tools such that all CPBB members can efficiently build …

Left Atrial Model, Borna Sobati, Sarah Porello, Tess Pate

Biomedical Engineering

The objective is to produce an electrophysiological model of an adult human left atrium. This model will be used to test mapping probe catheters used for locating cardiac arrhythmias against current technology used in practice. Dr. Chris Porterfield requested this model and other physicians or probe catheter manufacturers may also use this product in the future. Dr. Porterfield also discussed the possibility of future senior project groups using the model as a bench test for designing new catheter tips. The model will precisely simulate electrical behaviors of the heart in normal as well as arrhythmic conditions. Ideally, the model will …

Final Design Report For Human Powered Vehicle Drivetrain Project, Derek Fromm, Luke Opitz, Michael Juri, Olivier Côté

Mechanical Engineering

The Cal Poly Human Powered Vehicle Club is building a bike to surpass 61.3 mph in 2019. The club and their mentor, George Leone, have proposed a senior project to design, build, and test the drivetrain for this year’s human powered vehicle. Research into human powered vehicles and their drivetrains has shown that the power that a rider can output and the efficiency at which the rider can pedal depend extensively on the design of the drivetrain. Despite the existence of standard bicycle drivetrain designs, the senior project team has found that the best design to meet the club’s requirements …

On-Demand Label Production, Robert A. Zimmerman

Master's Theses

The production and approval process for the various labels used in clinical trials wastes significant time and resources through the need to outsource label production or rely on large reams of pre-cut label stock for each revision throughout the process. An in-house, on-demand label printing and cutting system is a potential remedy to this waste. Previous work by Cheadle et al. resulted in a functional electomechanical prototype of the label cutting aspect of this research, capable of rudimentary linear cuts. In this continued research, emphasis was placed on improved label cutting capabilities and creating PC control software for label design. …

Effects Of Bio-Composites In Corrugated Sandwich Panels Under Edgewise Compression Loading, Jalen Christopher Mano

Master's Theses

Present day composite sandwich panels provide incredible strength. Their largest problem, however, is early bonding failure between the core and the skin. This is due to the low bonding surface area of present cores like honeycomb. Corrugated structures could provide a remedy for this with their much larger bonding surface area. Corrugated structures have extreme mechanical properties deeming them particularly useful in aerospace and automotive applications. However, previous research has shown that the stiffness of carbon fiber causes debonding and drastic failure when used as both a core and a skin. Bio-composites have properties that could strengthen the corrugated sandwich …

Comparison Of Lqr And Lqr-Mrac For Linear Tractor-Trailer Model, Kevin Richard Gasik

Master's Theses

The United States trucking industry is immense. Employing over three million drivers and traveling to every city in the country. Semi-Trucks travel millions of miles each week and encompass roads that civilians travel on. These vehicles should be safe and allow efficient travel for all. Autonomous vehicles have been discussed in controls for many decades. Now fleets of autonomous vehicles are beginning their integration into society. The ability to create an autonomous system requires domain and system specific knowledge. Approaches to implement a fully autonomous vehicle have been developed using different techniques in control systems such as Kalman Filters, Neural …

Daily And Seasonal Variability Of Offshore Wind Power On The Central California Coast And Statewide Demand, Matthew Douglas Kehrli

Physics

No abstract provided.

The Timber Buckling Restrained Brace Frame, Jessica Resta

Architectural Engineering

With the increasing awareness on the topic of earthquake resistance, efficient, cost-effective, and environmentally friendly solutions in the structural field are on the rise. The purpose of this report is to investigate the Timber Buckling Restrained Brace (TBRB), a new lateral-resisting element made of steel and lumber, applicable in residential and small commercial units. In addition to the TBRBs’ materials being readily available, the braces are easy to manufacture, reducing overall costs of production and transportation. The brace, made partly of wood, has also a low environmental impact when compared to other lateral force resisting elements like concrete shearwalls or …

Variable Frequency Drive (Vfd) Specifications For Irrigation District Pumps, Charles M. Burt, Kyle Feist, Gary Wilson

BioResource and Agricultural Engineering

This information was compiled by ITRC and includes specifications for standards, warranties, submittals, VFD size, and other technical details to aid districts in the selection and implementation of VFD system.

Variable Frequency Drive (Vfd) Specifications For On-Farm Pumps, Charles M. Burt, Kyle Feist, Gary Wilson

BioResource and Agricultural Engineering

This document applies to Variable Frequency Drive (VFD) system installations meeting all of the following criteria:

The project owner or authorized representative is applying to participate in the "PG&E Agricultural Pumping VFD Incentive Program," which involves a rebate for a complete VFD system, rather than components.

This project involves a VFD system designed to control the speed of a 60 Hz alternating current motor that is rated for:

• 480VAC or less
• 600 HP or less
• The VFD-controlled motor will be used specifically for pumping agricultural irrigation water into a pressurized irrigation system.

難於登天 Harder Than Climbing To Heaven: Fighter Aviation In The Republic Of China Air Force (1928-1994), Jordan Andy Li

History

A study of the founding and evolution of the Republic of China (ROC) Air Force's fighter aviation from 1928-1994. Topics include Chinese Air Force during the Second Sino-Japanese War (1937-1945), Chinese Civil War, and cross-Taiwan Strait relations throughout the Cold War.

My Baseball Collection App, Nicolas A. Parra

Computer Science and Software Engineering

My Baseball Collection is an iOS application that aims to simplify the management and expansion of physical baseball trading card collections. The app allows users to digitize their baseball card collection by uploading images of cards they possess, creating a wishlist of cards they are seeking, and viewing the collections and wishlists of other users. This project seeks to provide quality of life improvements to those within the baseball card trading community and to further facilitate communication and trading in an online world.

Microgrid Renewable Energy Integration, Do Quang Thanh Vo

Electrical Engineering

The Microgrid is a small-scale electrical system that is designed to give Cal Poly students hands-on experience on power generation, system protection, distribution, and automation that would otherwise be very difficult to experiment in a large-scale model.

To closely replicate the modern electrical grid, a renewable energy source shall be added to the Microgrid in conjunction with the existing synchronous generators. Electrical engineering student, Virginia Yan initiated this effort, namely Grid-Tied Solar System project [1], by designing and constructing a set of solar panels and microinverter for future connection to the Microgrid. The scope of Virginia’s project was, however, limited …

Parkinson's Freezing Of Gait Device Attachment, Reagan Burns, Sidney Collin, Hadley Rose

Biomedical Engineering

The Freezing of Gait Project aims to design and develop an attachment mechanism for a medical device to help Parkinson’s patients overcome freezing of gait (FOG). The mechanism will allow the device to attach to a variety of canes or walkers, while being easy for Parkinson’s patients to use. It will interface with a device produced by De Oro Devices. The project includes an analysis of current competitive devices, a summary of customer needs, design of experiments to test significant features of the attachment, and project plan. The customer needs are translated to engineering metrics. Failures and mitigation of risks …

Heat Stress Identification, Nathanial Nyberg, Christina Santini, Zachary Miller

Biomedical Engineering

This document contains all information pertinent to the creation of the desired product and how the desired product fulfills the problem statement. This document clearly defines the customer requirements and how they relate to engineering specifications, metrics that will define the boundaries that the desired product must lie within. This document will then reveal all concepts that were considered during the design phase of this project and how those concepts were compared. This includes all quantitative parameters that provided a clear front-runner concept and the rationale for those parameters and the values and weight assigned to them.

Then this document …

Flash-Mold Machine For Manufacturing Drug Implants, Conor Vache, Sonja Daebelliehn, Ryan Thomson

Biomedical Engineering

This Final Project Report provides the reader with a comprehensive detailing of all of the actions and work that has been completed for this Senior Design Project. In this report, the Cal Poly Biomedical Engineering Senior Project Team will discuss some background on the existing Mark I Flash-Mold Machine currently in use by Gesea Biosciences, background information on Gesea Biosciences, the Customer Requirements and Design Specifications of the new machine, Quality Engineering considerations, design concepts discussed, design concepts chosen, safety considerations, prototype development, manufacturing, testing protocols, and testing results, etc.

Advanced Technology Lift Assist Systems - Atlas, Sebastian L. Gnagy, Ismael A. Rangel, Giovani Rodriguez, Tyler J. Hooks

Mechanical Engineering

EMS personal work hard every day to save lives. A big part of the job is helping to lift people who are notinjured but have fallen and can’t get up by themselves. There are currently no procedures or tools that areconsistently used by EMS in this specific situation. This leads to the response often being ad hoc costing more time, resources, and manpower that can be vital if multiple emergencies happen at the same time. Along with this the job of lifting an individual that is overweight is no easy feat and is one of the primary factors that leads …

Effect Of Bio-Augmentation Product Biowish® Septic Rescue On The Wastewater Treatment Performance Of Residential Septic Tanks, Kimberly Michelle Lamar Merilles

Master's Theses

Residential septic systems provide reliable wastewater treatment for over 26 million homes and facilities in the United States, and many more worldwide. When properly maintained, these systems are reliable, low-cost, and long-term treatments for residential wastewater. When neglected, septic systems can fail and lead to health concerns and ecological harm to soil and groundwater contamination through the improperly treated wastewater effluent.

This study tested the effect of the bio-augmentation product BiOWiSH® Septic Rescue of BiOWiSH® Technologies International, Inc. (hereafter referred to as BiOWiSH) on the biological treatment of residential septic tanks. BiOWiSH is meant to act as a bio-augmentation product …

Plga Scaffold Device, Tyler D. Tackabery, Bryce Powada, Tate Morell

Biomedical Engineering

No abstract provided.

Modern Yard Sale Application, Lauren Epling, Matthew Piasecki

Computer Science and Software Engineering

YardSail is a modern application that provides users a place to post and view local Yard Sales. There is an astounding need for a safe space where users can comfortably post their yard sale address and items for all locals to easily see (without needing to drive down a specific street to find out). Currently, there does not exist an application for users that accomplishes what we set out to accomplish. As a team, we truly believe YardSail could be a popular application that helps users sail through the experience of hosting or visiting a yard sale.

Space Defense: Creating A 2d Game With 3d Assets Using Unity Game Engine, Jeevan Vase

Computer Science and Software Engineering

The goal of this senior project was to learn and use the skills necessary for one person to make a complete game. The 3D assets that were used were downloaded from the Unity Store. I used Unity Game Engine to create the logic for the game. This document explains the technologies that I used, design choices I made, feedback from player-testing, and work that I want to complete for the project in the future. The final game demo features three levels, a start screen, and a combat system that allows players to gain additional ships to help defend their planet.

Esophageal Mapping And Temperature Regulation For Catheter Ablation, Madison J. Keith, Morgan A. Jawitz, Sarah L. Sanders

Biomedical Engineering

The purpose of this document is to provide a development summary for a proposed esophageal temperature mapping device used during catheter ablation. Catheter ablation therapy is performed in the left atria with hot or cold materials to create scar tissue to treat atrial fibrillation. However, utilized temperatures and absorbed energies from the catheter can cause undesired esophageal damage. Therefore, this medical device is designed to monitor esophageal temperature and map its location during catheter ablation. If dangerous temperatures are reached, the device will alarm the surgeon.

This document provides an in-depth overview of the esophageal temperaturemapping device’s development and contains …

Concussion Indication Device, Taylor O'Donoghue, Isabel Jellen, Eric Shechter

Biomedical Engineering

In this document we summarize our intent to design and manufacture a device that will be used in conjunction with a football helmet, will detect impact forces to the head, and notify the user to seek out further medical attention when subjected to forces large enough to cause concussions. We describe the large market including all levels of football players and the need for improved technology that will not only be effective in elucidating risks but encouraging players to use the device over the alternatives. To design the device, we have researched the problem of concussions in football and have …