Engineering Commons^™

Investigation Of Grout - A Comparison Of Standard Grout Mix To Self-Consolidating Grout Mix, Rachel Garcia Chandler

Architectural Engineering

Masonry is a major structural material for low rise buildings, however the design of masonry buildings is rarely taught as a formal course at most universities. As part of the educational experience and to become familiar with the specifications and testing procedures for grouted masonry, a student run experiment on varying the water to cement ratio of masonry grout was conducted. The purpose is to report on the effects of changing the water-to-cement (W/C) ratios in a standard grout mix. The typical W/C ratio is approximately 0.80:1.00. In order to show the effects of increasing water in a grout mix, …

Pseudo-Stereo Audio Processor, Zachariah David Bunce

Electrical Engineering

Due to both technical and resource limitations, non-professional audio production must often record with a single microphone, creating a mono audio signal. Even some originally multi-channel audio files often combine the separate channels into a single channel to save memory. However, this channel limitation makes any music held within the audio duller during listening. The Pseudo-Stereo Audio Processor remedies this situation, introducing a quadrature phase shift onto a given single-channel audio signal, producing multiple phase shifted output signals. These separate fixed-phase output signals are then recombined to produce a variable phase difference, emulated two-channel version of the input signal, allowing …

Apollo Photovoltaic Overview And Assessment, Andrew S. Hollis, James P. Tran, Andes Le, Regita Soetandar

Electrical Engineering

This senior project aims to take the various data sheets provided to us by PIVVIR Solar, the organization in charge of Apollo photovoltaic power plant, and perform an overall assessment as well as condensing the information into a more digestible and concise document. Currently, the documents provided to us by PIVVIR Solar are scattered and disorganized. Our goal is to take what we understand about photovoltaic power plants and combine it with the Apollo plant’s datasheets and summarize everything into one focused document that more readers can understand.

Portable Electrocardiogram Device And Signal Processing Design, Ryan F. Blaalid

Electrical Engineering

Full 12-lead electrocardiogram (ECG) measurements require inconvenient and time consuming adhesive electrode placement. This project proposes a design for a Bluetooth based ECG for remote patient measurement. The device is designed to measure up to 6-leads and utilizes 5 dry (non-adhesive) electrodes to accomplish this. The device delivers the ECG data to the user’s mobile smart phone and can then be sent to the patient’s doctor for analysis. Since the contact of the dry electrodes to the skin is not perfect, low-frequency noise called baseline wandering is introduced. A signal processing technique borrowed from image processing called morphological filtering is …

Dc-Dc Buck-Boost Converter For Energy Harvesting From Exercise Equipment, David T. Bolla

Electrical Engineering

This senior project helps harvest the excess energy that exercise equipment generates. Sustainable energy acts as the main target for this project, and it attempts this through reusing the energy created when exercising on elliptical machines. An elliptical machine outputs voltages between approximately 5V and 60V, and a micro-inverter requires an input voltage of about 36V. This DC-DC converter takes the variable output voltage of an elliptical machine and brings it to approximately 36V. Re-purposing the excess energy an elliptical user creates for the grid provides a sustainable alternative to dissipating the energy as heat. This project, along with other …

Cal Poly Ee 518 Electric Power Protection Laboratory, Richard Terre, Vincent Tham, Austin Kurth

Electrical Engineering

Facing a rapidly-changing power industry, the electrical engineering department at Cal Poly San Luis Obispo proposed Advanced Power Systems Initiatives to better prepare its students for entering the power industry. These initiatives call for the creation of a new laboratory curriculum that utilizes microprocessor-based relays to reinforce the fundamental concepts of power system protection.

The electric power protection laboratory (EPPL) senior project is the validation of lab manuals written for the planned EE-518 power system protections laboratory looking to be offered in Spring 2020 alongside the current lecture class under the same designation. This report evaluates the lab manual, verifies …

Marine Chemistry Control System, Natalie Weisenburger, Kathryn Turk, Julio Sierra

Biomedical Engineering

The aim of this project is to design a control system that manipulates different variables of ocean chemistry including pH, temperature, DO, N2 , and CO2 content for research by ocean chemists of marine species and their environments in 2, 5 gallon tanks.

Digital Forensics Challenge, Zoe Lie, Sydney Marie Mendoza

Computer Engineering

No abstract provided.

Reach - A Community Service Application, Samuel Noel Magana

Computer Engineering

Communities are familiar threads that unite people through several shared attributes and interests. These commonalities are the core elements that link and bond us together. Many of us are part of multiple communities, moving in and out of them depending on our needs. These common threads allow us to support and advocate for each other when facing a common threat or difficult situation. Healthy and vibrant communities are fundamental to the operation of our society. These interactions within our communities define the way we as individuals interact with each other, and society at large. Being part of a community helps …

An Fpga Implementation Of Digital Guitar Effects, Carson James Robles

Computer Engineering

One of the most versatile aspects of the electric guitar is its ability to change its sound completely and on-the-fly through the use of effects pedals. Conventional guitar pedals contain one effect and can be chained together. The goal of this project is to serve as a contained multi-effects station with five popular electric guitar effects packed into one product. On top of this, the effects each have two tunable parameters to allow users to dial in the exact tone they are looking for. All of the signal processing done in this project is conducted on an FPGA which also …

Frequency Modulation Integrated Circuit For Radars, Jade S. Visutsiaz, Hue Thu Doung

Electrical Engineering

Frequency-modulated continuous wave radars are a type of radar capable of measuring the distance to a stationary object or velocity of a moving object by radiating a continuous transmission of a signal that linearly sweeps its frequency repeatedly between two set frequencies. Frequency-modulated continuous wave radar signals are generated by a high frequency voltage-controlled oscillator or digital-to-analog converter. This project is an integrated circuit that produces the frequency-modulated signal on a single chip in the analog realm. The circuit was designed using Cadence Virtuoso with TSMC 180 nm process technology model. The generated signal is intended for use with ultra-wideband …

Spread Spectrum Buck Converter, Summer Elise Rutherford, Kyle Brandon Halloran, Brian Taylor Arbiv

Electrical Engineering

Electromagnetic interference (EMI) is an issue prevalent to DC-DC converters. When a system doesn’t effectively filter out external noise or signals, these signals can cause disturbances to the system at large. The switching technology of DC-DC converters (PWM in particular), lends the system susceptible to EMI because there is a prevalent peaks at the switching frequency, meaning any external signals will not be effectively attenuated at this frequency. This can cause significant issues at the input bus of the DC-DC converters because this bus is likely the input of a multitude of devices; the EMI susceptibility caused by switching technology …

Industry Automation And Controls Lab, Nadir Ilyas Khan, Michael Campos, Samantha Bituen

Electrical Engineering

This work details our efforts to build a new industrial automation lab for the Cal Poly San Luis Obispo Electrical Engineering department from the ground up. Thanks to a donation of Modicon M580 programmable logic controllers (PLCs) from Schneider Electric, we built a lab hardware layout to support a learning environment for students. The Electrical Engineering department currently doesn’t offer any courses for students to learn about automation in topics more closely following the topics learned in their curriculum. It will be beneficial for the school and the students to have graduates in the major with some knowledge of controls …

Pv Hybrid Inverter And Bess, Jacob Sussex, William Dresser, Owen Mckenzie, Jonathan Wharton, Derek Seaman

Electrical Engineering

The storage of energy from renewable sources such as photovoltaic based systems is a growing market, with 36 MWh of storage installed in Q1 of 2018. A report from EnergySage earlier this year states that in 2017, 74% of residential solar owners were also interested in energy storage systems. Mainstream systems like Tesla’s Powerwall are competing with other lithium-ion based storage systems from a wide number of providers on the market today. Short term and long term data collection on a system like this could be useful in designing future systems which perform better than the current market offerings. This …

Automatic Gain Control Integrated Circuit, Kyman Huang, Garth Leung, Lauren Williams

Electrical Engineering

This paper aims to describe the design process of an automatic gain controller (AGC) integrated circuit. An AGC is intended to provide variable gain in order to produce a consistent, distortionless output with a wide range of input magnitudes. This implementation was created as a standalone, small IC for audio systems. The chip requires only 7 pins, allowing for a small 8-pin package. LTSpice was used for the circuit design process and initial simulation. Cadence Virtuoso was used for the circuit layout and further simulations. Xilinx Vivado was used for digital circuit design and initial simulations. This project set out …

Alzheimer’S Disease Detection Using Convolutional Neural Netowork & Wavelets, Ean Hendrickson, Gabriel Amancio, Chloe Eusbio, Kaioli Bessert

Electrical Engineering

It is estimated that 5.7 million people in the United States have Alzheimer’s dementia, including about 1 in 10 people above the age of 65. Alzheimer’s disease detection can help doctors to diagnose patients earlier and help them with preventative, proactive treatment. In this project, we attempt to use two different methods to analyze MRI brain images for Alzheimer’s disease detection, one with convolutional neural network and deep learning algorithm, and the other one with discrete wavelet transform. Computer simulation results are presented in the report.

Cooking Hand Multi-Tool, Amanda D. Meares, Amy H. Wilson, Ethan G. Littlejohn, Duania A. Evans

Biomedical Engineering

The purpose of this project was to devise a solution for Jorge Segura, a US Marine who was wounded in Afghanistan and had to have his non-dominant arm amputated above the elbow. His current prosthetic attachments are not suited to cooking tasks, so he needed a way to cook more effectively with either prosthetic attachments or accessibility devices. The main tasks that he needed help with was holding down food on cutting boards and stabilizing pots, pans, and bowls especially when stirring. After background research, exploring commercially available devices, and talking with our challenger, our solution was to design three …

Additive Manufacturing Powder Removal: Viper 2.0, Andrew D. Epperson, Sean Mccracken, Melissa O'Neil, Alex Ward

Mechanical Engineering

This report presents the final design review of this senior project team. The project is being sponsored by Lawrence Livermore National Laboratory, a federal design agency. Lawrence Livermore National Laboratory is interested in improving their metal additive manufacturing process. The goal of this senior project is to improve the efficiency and safety of a method currently being used to remove metal powders for additively manufactured components. A senior project team in 2017-2018 created the Vibration Induced Powder Evacuator and Reclaimer (VIPER), a device that uses a vibration motor to shake a printed part until it is clean from excess powder. …

Cal Poly Satellite Positioning Systems: "Thrust Or Bust!", Josh W. Neiman, Milena A. Milich, Gerardo Ramirez, Joshua A. Tran

Mechanical Engineering

Satellites need a way to make precise corrections to their orbit and positioning. The purpose of this project is to design a gimbal mechanism for Astranis that orients an ion thruster along a requested vector. The gimbal must produce any vector within a 2.5° cone in a thirty-minute window. Current systems are expensive and not well suited to this application. The design must be operable in a space environment and optimize mass, size, and reliability. Our design toggles between four discrete positions to achieve an average thrust vector. The gimbal accomplishes this using four solenoids that tilt a plate about …

C6 Wheels, Samuel L. Pizot, Luke Martin, Josh Warner, Jonah Levis

Mechanical Engineering

This document details the C6 Wheels project being undertaken for senior design. The objective is to design and manufacture carbon fiber reinforced polymer wheels for the Cal Poly Formula Society of Automotive Engineers (FSAE) team. The wheel shells will be used on FSAE’s competition vehicles. FSAE requested the wheels to improve the handling characteristics of their vehicles by reducing the unsprung and rotational mass. They have attempted carbon fiber wheels previously but have not yet run any on their vehicles. FSAE specifically proposed the design of carbon fiber shells with an aluminum center as opposed to full carbon fiber wheels …

Nano Fab Lab 63, Brian K. Deemer, Josh Clemons, Nick Brodine, Delaney Fitzsimmons

Mechanical Engineering

Lawrence Livermore National Laboratories (LLNL) has several steps in the production process for ceramic nanofiber tubes that they would like to improve - electrospinning, cutting, rolling, sealing and heat treating. We undertook the challenge to deliver LLNL with a semi-automated process that efficiently integrates the steps of cutting, rolling, and sealing to save time and improve control over end dimensions. In this document, we discuss the technical background of the manufacturing steps currently followed to create nanofiber tubes, identify which steps are incorporated in our prototype and explain how they will interface with one another, define the design requirements, present …

Atmospheric Water Harvesting: An Experimental Study Of Viability And The Influence Of Surface Geometry, Orientation, And Drainage, Carson T. Hand

Master's Theses

Fresh water collection techniques have gained significant attention due to global dwindling of fresh water resources and recent scares such as the 2011-2017 California drought. This project explores the economic viability of actively harvesting water from fog, and techniques to maximize water collection. Vapor compression and thermoelectric cooling based dehumidifier prototypes are tested in a series of experiments to assess water collection capability in foggy environments, and what parameters can increase that capability. This testing shows an approximate maximum collection rate of 1.25 L/kWh for the vapor compression prototype, and 0.32 L/kWh for the thermoelectric cooling prototype; compared to 315 …

Evaluation Of Tensile Properties For Selective Laser Melted 316l Stainless Steel And The Influence Of Inherent Process Features, Paul Swartz

Master's Theses

Optimal print parameters for additively manufacturing 316L stainless steel using selective laser melting (SLM) at Cal Poly had previously been identified. In order to further support the viability of the current settings, tensile material characteristics were needed. Furthermore, reliable performance of the as-printed material had to be demonstrated. Any influence on the static performance of parts in the as-printed condition inherent to the SLM manufacturing process itself needed to be identified. Tensile testing was conducted to determine the properties of material in the as-printed condition. So as to have confidence in the experimental results, other investigations were also conducted to …

Multiple Input, Single Output Dc-Dc Conversion Stage For Dc House, Jason Baltierrez

Master's Theses

n this thesis project, a proposed architecture for the multiple input, single output conversion stage for the DC House was designed, simulated, and tested. This architecture allows for multiple different input sources to be used to create a single higher power output source. The design uses a DC-DC boost converter with a parallelable output which has been demonstrated to allow increased total output power as a function of the number of input sources available. The parallelable output has been shown to distribute load amongst the input sources relatively closely to optimize the system. This approach is also desirable since it …

Multi-Vector Tracking Of Wifi And Zigbee Devices, Calvin Andrew Laverty

Master's Theses

Location privacy preservation has shifted to the forefront of discussions about next generation wireless networks. While pseudonym-changing schemes have been proposed to preserve an individual's privacy, simulation has shown that new association attack models render these schemes useless. The major contribution of this thesis is the implementation of a tracking network with commodity hardware on the California Polytechnic State University campus which leverages the combination of de-anonymization strategies on captured wireless network data to show the effectiveness of a pseudonym-changing scheme for wireless identification across WiFi and Zigbee protocols.

Surveying Underwater Shipwrecks With Probabilistic Roadmaps, Amy Jeannette Lewis

Master's Theses

Almost two thirds of the Earth's surface is covered in ocean, and yet, only about 5% of it is mapped. There are an unknown amount of sunken ships, planes, and other artifacts hidden below the sea. Extensive search via boat and a sonar tow fish following a standard lawnmower pattern is used to identify sites of interest. Then, if a site has been determined to potentially be historically significant, the most common next step is a survey by either a human dive team or remotely operated vehicle. These are time consuming, error prone, and potentially dangerous options, but autonomous underwater …

Colloid Thruster To Teach Advance Electric Propulsion Techniques To Post-Secondary Students, Alexander M. Powaser

Master's Theses

Colloid thrusters, and electrospray thrusters as a whole, have been around since the 1960s. When they were first developed, the high efficiency and fine thrust control was overshadowed by the high power requirement for such a low thrust that the system provides. This caused the technology to be put on hold for aerospace applications. Now, as small satellites are becoming more prevalent, there has been a resurgence in interest in electrospray thruster technology. The recent advancements in tech- nology allow electrospray thrusters to use significantly less power and occupy less volume than their predecessors. As electrospray technology continues to advance, …

Degradation Of Emerging Contaminants By Advanced Oxidation Using Multi-Walled Carbon Nanotubes And Continuous Ozone Injection, Emily N. Miller

Master's Theses

With a growing population and continuous accumulation of pollutants, water resources worldwide are quickly being depleted. Drastic improvements need to be made in both water conservation and treatment. Advanced oxidation processes (AOPs) have been developed to go above and beyond the capabilities of traditional wastewater treatment facilities to eliminate emerging contaminants from our water systems. AOPs increase the generation of hydroxyl radicals (•OH) in oxidation reactions, which are less selective and more reactive than other oxidants, such as ozone, so they are more effective at degrading persistent compounds. This study explored an AOP that utilizes ozonated multi-walled carbon nanotubes (MWCNTs) …

Characterization Of Resistance Change In Stretchable Silver Ink Screen Printed On Tpu-Laminated Fabrics Under Cyclic Tensile Loading, Corey R. Sutton

Master's Theses

A stretchable silver ink was screen printed to TPU sheets, then tensile coupons of the TPU, both bare and laminated to cotton, Denim and spandex fabric, were subjected to 1000 cycles of 20% uniaxial strain. In-situ resistance measurements of printed traces were processed to generate datasets of maximum and minimum resistance per cycle. A mechanistic fit model was used to predict the resistance behavior of the ink across TPU/fabric levels. The results show that traces strained on TPU laminated to spandex (polyester) fibers had an average rate of increase in resistance significantly lower than that of traces strained on bare …

Adapted Trailer Hitching System, Joseph Neil Hearn, Maxwell M. Selna, Maximilian D. Cossalter, Eric B. Ringsrud

Mechanical Engineering

This report highlights the entire design process of an adapted trailer hitching system for Taylor Morris: a navy veteran and quadruple amputee. This begins with problem definition through customer and product research. Objectives are generated after the problem is defined and the boundary of the project is set. This outcome of the project focuses on modifications/improvements to the vehicle side of the problem and leaves the trailers untouched. Engineering specifications are developed to constrain the concept design direction, which ultimately dictates the outcome of the final design. The final design is used as a basis to manufacture a structural prototype …