Engineering Commons^™

Hydronic Service Valve Product Development, Mark Hunsaker

Construction Management

Since the inception of modern mechanical and HVAC systems, maintenance and repairs have been prevalent in both contracting and facility operations. The average life of HVAC equipment is fractional compared to the life of buildings as construction technologies improve. Traditionally, the serviceability of heating and cooling equipment has entailed the significant amounts of labor and materials to disruptively drain or freeze hydronic systems in order to cut in means of bypassing the main system, swapping out equipment, or repair. The intent of this project is to explore alternative methods to forgo the aforementioned negative impacts of service and to improve …

Cal Poly Associated General Contractors Service- Learning Project In San Ignacio, Belize, Will A. Myers

Construction Management

In the winter of 2020, the Cal Poly Associated general Contractors chapter of San Luis Obispo built over 200 linear feet of soccer seating for the community of Selena, just outside of San Ignacio, Belize. Our team fundraised over $18,000 and designed a soccer stadium that would leave a lasting impact on the community. Throughout all phases of the project, we were challenged with many obstacles that tested our ability to overcome and handle difficult situations.

Belize Service Learning: A Case Study In Construction Technology Abroad, Parker H. Doshier

Construction Management

In Winter of 2019, members of the Associated General Contractors, Student Chapter at Cal Poly traveled to Selena, Belize to complete soccer bleachers at the local soccer field. This trip offered an excellent case study into feasibility and benefits of new construction technology on all project sizes and in different countries. SketchUp was used in multiple phases of this project including design, estimating and the creation of as-builts. Procore offers an array of useful features including the scheduling, daily logs and meetings that were used on this project. The scheduling feature was useful in tracking travel deadlines and for monitoring …

Analyzing More Sustainable Alternatives Than Using Ordinary Portland Cement In Commerical Construction, Brandon A. Sturla Bs

Construction Management

The purpose of this paper is to look at more sustainable alternative options for concrete use for California Commercial Contractors. This paper will analyze the more sustainable options for concrete and come to conclusions on how effective the alternative options are for protecting the environment, encouraging sustainability, maintaining cost effectiveness, and maintaining efficiency in building. This paper provides data on the negative impact concrete use has had on the environment and potential ways to alleviate this. This paper will also analyze how cost-effective the alternative options are to see if the alternative options are realistic and affordable to use in …

Prefabrication And The Labor Shortage On The Central Coast, Brenden Ryan Napier

Construction Management

The labor shortage has affected every aspect of construction all over California, however the central coast has been hit especially hard. The central coast’s location between the two major developmental hubs presents challenges such as relocating employees and finding skilled craftsman. One potential method that has been shown to increase productivity and cut costs is to prefabricate. Prefabrication can improve working conditions and increase worker safety while streamlining schedule and reducing environmental impact. While these benefits are certainly possible in larger cities that have the manufacturing grunt, this paper aims to understand if prefabrication is a viable way to alleviate …

Construction Curriculum Developed For Continuation Schools, Orlando I. Yepez

Construction Management

This paper will discuss a curriculum, an introduction to construction fundamentals, that was built for continuation schools. A continuation school is a school for at-risk youth in which it provides programs of empowering, inspiration and outlet. Five modules were created that focus on different sections of the construction industry. These modules consist of Site Safety, Untroduction to Basic Math, Introduction to Power Tools, Introduction to Construction Drawings, and Basic Employable Skills. Each module will consist of a ten-question quiz and presentation. Two homework assignments were also created. One homework assignment for site safety which requires students to identify if the …

Optimizing Llrf Parameters In The Electron-Ion Collider, William M. Bjorndahl

Physics

To improve particle interaction in the future Electron-Ion Collider (EIC), we investigated different feedback implementations to control the accelerating voltage and examined the power and beam phase for each instance. Using MATLAB, we studied three feedback mechanisms: Direct, One Turn, and Feedforward. Enacting feedforward yielded the best performance. To minimize the klystron power consumption, we analyzed different Low-Level Radio Frequency (LLRF) parameters such as detuning. Combining theory and simulated results, we found the optimal detuning value that minimizes klystron power consumption.

Residual Strength Of Franciscan-Derived Clay, Yingyi Xu

Master's Theses

In February of 2017 after a period of heavy rainfall, a slope destabilized behind Fremont Hall on the campus of Cal Poly San Luis Obispo. The geology of this slope stability failure is the Franciscan Complex. The Franciscan Complex, when weathered in place, results in clay soil that makes up the typical soil mantle on the hills throughout the region. Peak strength is the typical parameter tested to assess the strength of the soil. For the Franciscan-derived clay, the residual strength is the focus of this study to understand slope failure since the clay is the weakest portion of the …

Lip Thrust Apparatus, Ian M. Wilson, Alvin K. Cheong

Mechanical Engineering

This document contains the background information, defined scope of work, preliminary design philosophy, conceptual design development, and final design choices along with its corresponding manufacturing and design verification plans. It also includes the preliminary testing and prototyping necessary in bringing our verification prototype to its final configuration for delivery. Finally, it includes the entire manufacturing process followed in creating the final project and the extensive testing performed to ensure it meets the defined engineering specifications. The aerodynamic phenomenon being analyzed and demonstrated in our final deliverable can be seen in a scenario where when a propeller is enclosed in a …

Decentralized, Noncooperative Multirobot Path Planning With Sample-Basedplanners, William Le

Master's Theses

In this thesis, the viability of decentralized, noncooperative multi-robot path planning algorithms is tested. Three algorithms based on the Batch Informed Trees (BIT*) algorithm are presented. The first of these algorithms combines Optimal Reciprocal Collision Avoidance (ORCA) with BIT*. The second of these algorithms uses BIT* to create a path which the robots then follow using an artificial potential field (APF) method. The final algorithm is a version of BIT* that supports replanning. While none of these algorithms take advantage of sharing information between the robots, the algorithms are able to guide the robots to their desired goals, with the …

Prosthetic Thumb, Allison M. Sigdestad, Sahil Sharma, Cale Foreman

Biomedical Engineering

The Prosthetic Thumb Project is a senior design project completed by Biomedical Engineering Undergraduate students at California Polytechnic State University. This senior design project is aimed at designing a prosthetic thumb for a Cal Poly Pomona student who lost their thumb in an accident last year. The patient has ultimately lost between 30-40% of functionality of his left hand, and so we would like to give him that mobility back. Originally, the patient was worried about having a prosthesis, and wanted something more stagnant that would resemble the look of the thumb he lost. However, after working with him, we …

Esophageal Temperature Mapping And Monitoring Sheath, Nicole M. Rogers, Hillary Johnson, Alexander Silva

Biomedical Engineering

The purpose of this document is to provide a product development summary for an accessory device that joins an esophageal temperature probe and a mapping catheter together to be used during cardiac ablation. Catheter ablation therapy is performed in the left atrium, utilizing extremely hot or cold temperatures to create scar tissue and treat atrial fibrillation and other arrhythmias. The close positioning of the left atria adjacent to the esophagus presents a large risk as the extreme temperatures used during ablation can lead to esophageal damage or fistulas. This device is designed to integrate correlate data from the temperature probe …

Ikioo Flying Robot, Nicholas Michael Lapidus, Bosung Josh Kim, Jenny Fong

Biomedical Engineering

No abstract provided.

Gesea Biosciences - Core Shell Pellet Manufacturing Device, Claire Edelman, Maria Medrano, Rachel Longoria

Biomedical Engineering

No abstract provided.

Housecalls Mobile: Virtual Stethoscope/Otoscope, Julia Kelley, Cullen Mcgee, Eduardo Uribe-Saldana

Biomedical Engineering

At the start of the project, our initial deliverables were to add a low cost camera into virtual otoscope and to add a pediatric attachment to the stethoscope. However, about half way through the first quarter (1.5 months into the project), our deliverables changed to the following: to design a housing unit for the selected otoscope camera and to increase battery life to allow for 12+ battery life. To accomplish our deliverables, we divided up the responsibilities as follows: One person headed the mechanical design, one person headed the electrical design, and one person served as a liaison between the …

Pulsed Electrical Field Ablation Modulation, Camille Lousie Dozois, Jason Tyler Arias, Courtnee Lin Madsen

Biomedical Engineering

This document comprises the steps taken by the senior project team to create a Proof-of-Concept Review for a Variable Pulsed Electric Field Ablation Catheter. First, the team did a significant amount of background research on related literature to better understand the current status of the project topic. After sufficient background information was obtained, project objectives and deliverables were finalized. Once customer requirements and the indications for use were completed, engineering specifications for the product and project were documented. All key customer requirements and engineering specs were related to the variable pulse functionality, maneuverability, as well as overall dimensioning of the …

Methods To Increase Algae Biomass Productivity In Raceway Pond Monocultures, Ryan S. Anderson

Master's Theses

The economics of algae biofuels and bioproducts would be improved by increased biomass productivity. Two studies on this potential are described in this thesis – one on a locally isolated filamentous yellow-green alga and the other on a planktonic strain genetically improved via selective enrichment.

Polycultures have been viewed as productive, stable, and, in some cases, harvestable by natural bioflocculation. Local native strains might have higher productivity than culture collection strains because they are already adapted to local outdoor conditions. In this study, the filamentous yellow-green alga Tribonema minus was isolated from a local volunteer polyculture. Its productivity as a …

Skier's Edge: Biomechanical Analysis, Benjamin T. Johannes

Master's Theses

ABSTRACT

Skier’s Edge: Biomechanical Analysis

Benjamin T. Johannes

The Skier’s Edge trainer can be used by novice or expert skiers. Testing was performed to analyze if the use of the Skier’s Edge could reduce in shear forces of the valgus moment on the knee joint and anterior cruciate ligament (ACL) due to lesser fatigue of muscle and a higher hamstring to quadricep (H/Q) ratio activity. This leads to a reduction of improper form and an increase in balance. Experiments performed observed the change in muscle activity with the use of the Skier’s Edge over time when compared to other forms …

Use Of Body Composition Imaging To Calculate 3-D Inertial Parameters For Inverse Dynamic Analysis Of Youth Pitching Arm Kinetics, Dalton James Jennings

Master's Theses

The objectives of this study were to 1) calculate participant-specific segment inertial parameters using dual energy X-ray absorptiometry (DXA) data (referred to as full DXA-driven parameters) and compare the pitching arm kinetic predictions using full DXA-driven inverse dynamics vs scaled, DXA mass-driven (using DXA masses but scaled centers of mass and radii of gyration), and DXA scaled inverse dynamics(ID) (using the full DXA-driven inertial parameters averaged across all participants), 2) examine associations between full DXA-driven kinetics and body mass index (BMI) and 3) examine associations between full DXA-driven kinetics and segment mass index (SMI). Eighteen 10- to 11- year-olds pitched …

Insulative (Direct Current) Dielectrophoretic Foul-Less Filtration In Microfuidic Systems, Matthew A A Whitman

Master's Theses

Filtration is a technology that is used almost ubiquitously in society from uses raging from filtration of macroparticles from water to pharmaceutical grade filtration products to remove anything larger than a protein. However, with such a wide range of uses, most filtration products have the same issue; membrane clogging (fouling) that prevents continuous use and requires frequent maintenance. This thesis hypothesizes that by applying a direct current (DC) to an insulating array of posts, they will create a foul-less insulative dielectrophoretic filter (iDEP) that does not clog since particles will levitate above the insulating array.

This thesis tested an inherited …

Electricity Price Forecasting Using A Convolutional Neural Network, Elliott Winicki

Master's Theses

Many methods have been used to forecast real-time electricity prices in various regions around the world. The problem is difficult because of market volatility affected by a wide range of exogenous variables from weather to natural gas prices, and accurate price forecasting could help both suppliers and consumers plan effective business strategies. Statistical analysis with autoregressive moving average methods and computational intelligence approaches using artificial neural networks dominate the landscape. With the rise in popularity of convolutional neural networks to handle problems with large numbers of inputs, and convolutional neural networks conspicuously lacking from current literature in this field, convolutional …

A System Architecture For Phased Development Of Remote Suas Operation, Eric Ashley

Master's Theses

Current airspace regulations require the remote pilot-in-command of an unmanned aircraft systems (UAS) to maintain visual line of sight with the vehicle for situational awareness. The future of UAS will not have these constraints as technology improves and regulations are changed. An operational model for the future of UAS is proposed where a remote operator will monitor remote vehicles with the capability to intervene if needed. One challenge facing this future operational concept is the ability for a flight data system to effectively communicate flight status to the remote operator. A system architecture has been developed to facilitate the implementation …

An Analysis Of The Influence Of Hand Hole And Ventilation Hole Design On Compressive Strength Of Corrugated Fiberboard Boxes By An Artificial Neural Network Model, Tita Archaviboonyobul, Ravipim Chaveesuk, Jay Singh, Tunyarut Jinkarn

Industrial Technology and Packaging

This research aimed at developing a high-performing corrugated fiberboard box compression strength prediction model and to analyze the influences of ventilation and hand hole designs for these containers on the box compression test (BCT) by applying artificial neural network (ANN) modeling. The input variables considered in this study are composed of nine parameters including box dimension as well as shapes, sizes, positions, and locations of ventilations and hand holes of a regular slotted container (RSC, FEFCO 0201). Back propagation algorithms (BPNs) of ANN models were developed from 970 BCT testing data points (single wall boards, C flute, 205/112/205 g/m2). Tested …

Tiny Disco: A Cost-Effective, High-Fidelity Wireless Audio System, Luke Martin Liberatore

Computer Engineering

The Tiny Disco is a WiFi based concert system, featuring improvements on popular “Silent Disco” concerts. Rather than being tied to compression and bandwidth restrictions present in traditional silent disco systems, the Tiny Disco system can deliver 320kbps+ audio quality, and allows listeners to bring their own headphones, further lending to the high quality audio experience.

Tiny Disco uses a Raspberry Pi as the audio server, and Espressif ESP32 microcontrollers as audio receivers/clients. The Tiny Disco is primarily geared toward smaller concerts and niche events where audio quality is valued, though due to its WiFi-based architecture, it can be expanded …

Evaluation Of Seismic Force Provisions For Ancillary Systems In Piers And Wharves Considering Effects Of Nonlinearity, Rakesh K. Goel

Civil and Environmental Engineering

Much of the prior research on understanding seismic response of secondary systems and development of code provisions was conducted either for nuclear power plant facilities or buildings. Most marine structures differ from nuclear power plant facilities or buildings in that the marine structures can be idealized as one-story building type systems. Furthermore, most previous studies have been limited to linear elastic behavior of both primary and secondary systems.

The objectives of this study are to (1) understand effects of nonlinearity, both in primary and secondary systems, on seismic forces in secondary systems, and (2) evaluate seismic force provisions proposed in …

Volumetric Flow Measurement For Irrigation District Turnouts, Charles M. Burt, Daniel J. Howes, Stuart Styles

BioResource and Agricultural Engineering

Technical assistance related to irrigation district turnout flow/volumetric measurement is provided by ITRC on behalf of California Dept. of Water Resources, USBR, and BIA irrigation projects. Throughout that work, it was apparent there was a need to organize well-established information as well as to provide new insights into irrigation flow measurement. The target audiences are irrigation districts and others who want to improve measurement accuracy for irrigation flow rates and volumetric deliveries to meet regulations, improve the efficiency of ditchriders (system operators), and provide equity and transparency to farmers and managers. The focus of this publication is on turnouts (deliveries) …

Discharge Coefficients For Rectangular Suppressed And Submerged Sluice Gates, Charles M. Burt, Albert J. Clemmens, Kyle Feist

BioResource and Agricultural Engineering

Two sizes of sluice gates were tested in submerged conditions with a variety of flow rates and gate openings. A new equation was developed for flow rate prediction.

The Optimum Design Of A Vacuum-Compatible Manipulator To Calibrate Space Based Ultraviolet Imagers, Jason L. Grillo

Master's Theses

Recent discoveries in geospace science have necessitated the design of compact UV imaging instruments to make space-based observations from multiple vantage points. The miniaturized ultraviolet imager (MUVI) instrument from the Space Sciences Laboratory (SSL) at UC Berkeley is under development to facilitate such discoveries on a wider scale. This thesis documents the design, integration, and characterization of a vacuum compatible manipulator to calibrate the MUVI instrument inside the UV thermal vacuum chamber at SSL. Precision linear and rotation stages were implemented with custom mounting plates to achieve four degrees of freedom. Optical components were installed to imitate the MUVI instrument …

Opendrop Software Development, Jiajun Guan

Electrical Engineering

To be able to transfer and mix solutions more efficiently and accurately during biology experiments, the Electrical Engineering department at Cal Poly University is planning to purchase or engineer the OpenDrop device. The OpenDrop device uses electro-wetting technology to control the movement of small droplets of water on a planar electrode array to transport and mix different solutions. This device is an open-source project and could be purchased online through the GaudiLab. The basic code of the system could be found in GitHub. With this code as a reference, the goal of this senior project is to develop the firmware, …

The Effects Of Covid-19 On Productivity In Project Management: A Case Study, Emily Lynne Gonzalez

Construction Management

The COVID-19 pandemic has affected many aspects of the construction industry and one of the main aspects that has been affected is productivity. Monitoring productivity on a job is important because it allows us to identify areas that take up the most time and thus gives us the opportunity to allocate resources effectively. Due to safety regulations and new protocols being put in place, the productivity levels on every job has changed. Whether its out in the field or in the office, workplace productivity has certainly been affected by COVID-19. This case study focuses on how the pandemic has affected …