Engineering Commons^™

Estimating The Dynamic Sensitive Cross Section Of An Fpga Design Through Fault Injection, Darrel E. Johnson

Theses and Dissertations

A fault injection tool has been created to emulate single event upset (SEU) behavior within the configuration memory of an FPGA. This tool is able to rapidly and accurately determine the dynamic sensitive cross section of the configuration memory for a given FPGA design. This tool enables the reliability of FPGA designs and fault tolerance schemes to be quickly and accurately tested. The validity of testing performed with this fault injection tool has been confirmed through radiation testing. A radiation test was conducted at Crocker Nuclear Laboratory using a proton accelerator in order to determine the actual dynamic sensitive cross …

Stratified Waveguide Grating Coupler For Normal Fiber Incidence, Gregory P. Nordin, D. M. Chambers, J. Jiang, B. Wang

Faculty Publications

We propose a new stratified waveguide grating coupler (SWGC) to couple light from a fiber at normal incidence into a planar waveguide. SWGCs are designed to operate in the strong coupling regime without intermediate optics between the fiber and the waveguide. Two-dimensional finite-difference time-domain simulation in conjunction with microgenetic algorithm optimization shows that about 72% coupling efficiency is possible for fiber (core size of 8.3 μm and ∆=0.36%) to slab waveguide (1.2- μm core and ∆=3.1%) coupling. We show that the phase-matching and Bragg conditions are simultaneously satisfied through the fundamental leaky mode.

A Flexible Circuit-Switched Communication Network For Fpga-Based Soc Design, Clint Richard Hilton

Theses and Dissertations

As FPGA densities continue to improve, single chips are becoming capable of implementing larger and more complex systems. Even today these systems may include several processors working in conjuction with a handful of other standard interfaces or custom modules. Additional system complexity naturally leads to added complexity throughout the different design and implementation stages. Attempting to design such a system while maintaining high performance and within a reasonable time frame is becoming more and more difficult. Architectural design approaches ranging from direct module interconnection to sophisticated bus schemes have been used to build such systems, all with their own trade-offs. …

Developing A Gis And Hydrological Modeling Approach For Sustainable Water Resources Management In The West Bank -- Palestine, Walid Wajeeh Sabbah

Theses and Dissertations

This research deals with setting up a GIS and hydrological modeling based approach for sustainable water resources management in the West Bank of Palestine. This water sustainability approach took into consideration the water balance, the social, the economic, the demographic, the environmental, and the institutional components in order to enhance and promote the sustainable development in Palestine, both on the short and long runs. To evaluate the water balance component, a methodology was introduced to create the Water Sustainability Map (WSM). Since the groundwater is currently the only accessible water source by the Palestinians, the WSM is represented by the …

Reducing Energy In Fpga Multipliers Through Glitch Reduction, Nathaniel Rollins, Michael J. Wirthlin

Faculty Publications

Sponsorship: NASA Earth Science Technology Office (ESTO). While FPGAs provide exibility for performing high-performance DSP functions, they consume a significant amount of power. For arithmetic circuits, a large portion of the dynamic power is wasted on unproductive signal glitches. Pipelining can be used to significantly reduce the unproductive power wasted in signal glitches. This paper presents a methodology for estimating the amount of power consumed by glitches and applies this methodology to non-pipelined, pipelined, and digit-serial multipliers. This glitch estimation is used to evaluate these multipliers using four energy metrics: energy per operation, energy delay, energy throughput, and energy density. …

Calibrating Seawinds And Quikscat Scatterometers Using Natural Land Targets, David G. Long, Lucas B. Kunz

Faculty Publications

The SeaWinds-on-QuikSCAT (QuikSCAT) and SeaWinds-on-ADEOS-2 (SeaWinds) scatterometers measure the normalized radar backscatter (O) of the earth's surface. These identical radar sensors are on different spaceborne platforms in similar orbits. QuikSCAT and SeaWinds data are used to infer near-surface wind vectors, polar sea-ice extent, polar-ice melt events, etc. In order to verify the relative calibration of these sensors, a simple cross calibration based on land backscatter measurements is performed. A first-order polynomial model is used to remove the incidence angle dependence of O for selected regions of the Amazon rainforest and the Sahara Desert. It is shown that the two sensors …

Electrothermomechanical Modeling Of A Surface-Micromachined Linear Displacement Microactuator, Christian D. Lott

Theses and Dissertations

The electrothermomechanical characteristics of an electrically-heated polycrystallinesilicon microactuator are explored. Using finite-difference techniques, an electrothermal model based on the balance of heat dissipation and heat losses is developed. For accurate simulation, the relevant temperature dependent properties from the microactuator material are included in the model. The electrothermal model accurately predicts the steady-state power required to hold position, and the energy consumed during the thermal transient. Thermomechanical models use the predictions of temperature from the electrothermal solution to calculate displacement and force from pseudo-rigid-body approximations and commercial finite-element code. The models are verified by comparing experimental data to simulation results of …

Hydrodynamic Drag And Flow Visualization Of Isotruss Lattice Structures, James T. Ayers

Theses and Dissertations

Hydrodynamic drag testing was conducted for eleven different configurations of IsoTruss® lattice structures. Flow visualization of prototypical IsoTruss® wind towers was also performed using Particle Image Velocimetry instrumentation. The drag test and flow visualization specimens included 6-node and 8-node configurations, single and double-grid geometries, thick and thin member sizes, smooth and rough surface finishes, a helical-only structure, and a smaller outer diameter test specimen. Three sets of hydrodynamic drag tests were conducted in a closed-circuit water tunnel: 1) orientation drag tests, 2) water velocity drag tests, and 3) height variation drag tests. The orientation drag tests measured the hydrodynamic drag …

Equalization Techniques For Multipath Mitigation In Aeronautical Telemetry, Vladimir Ignacio Paje

Theses and Dissertations

This thesis describes the application of adaptive equalization based on the constant modulus algorithm (CMA) and the decision-feedback minimum mean squared error (DF-MMSE) concept to the two compatible offset QPSK waveforms (FQPSK and SOQPSK-TG) that constitute the ARTM Tier-1 waveforms. An adaptive version of the DF-MMSE equalizer is developed and applied to this application. In the presence of frequency selective multipath interference typically encountered in aeronautical telemetry, both equalization techniques are shown to provide reliable performance for FQPSK and SOQPSK-TG. The performance of both waveforms with the DF-MMSE equalizer is slightly better than that using the CMA equalizer. Implementation trade-offs …

Analytical Modeling Of Wood-Frame Shear Walls And Diaphragms, Johnn Paul Judd

Theses and Dissertations

Analytical models of wood-frame shear walls and diaphragms for use in monotonic, quasi-static (cyclic), and dynamic analyses are developed in this thesis. A new analytical model is developed to accurately represent connections between sheathing panels and wood framing members (sheathing-to-framing connections) in structural analysis computer programs. This new model represents sheathing–to–framing connections using an oriented pair of nonlinear springs. Unlike previous models, the new analytical model for sheathing-to-framing connections is suitable for both monotonic, cyclic, or dynamic analyses. Moreover, the new model does not need to be scaled or adjusted. The new analytical model may be implemented in a general …

All Hexahedral Meshing Of Multiple Source, Multiple Target, Multiple Axis Geometries Via Automatic Grafting And Sweeping, Matthew N. Earp

Theses and Dissertations

The development of algorithms for the automatic creation of finite element meshes composed entirely of hexahedra (all-hex) is an active area of research. All-hex meshes are desirable for their characteristic of high accuracy with a low node count. Sweeping is one of the most widely used algorithms for generating all-hex meshes. A limitation of sweeping, however, is that it can currently be applied only to prismatic or extruded geometry types. This thesis develops a method to combine sweeping with another algorithm known as "Grafting". Grafting adjusts the mesh on one volume to conform to a second volume. In this manner …

Phase Locked Flow Measurements Of Steady And Unsteady Vortex Generator Jets In A Separating Boundary Layer, Laura C. Hansen

Theses and Dissertations

Vortex generator jets (VGJs) have been found to be an effective method of active separation control on the suction side of a low pressure turbine (LPT) blade at low Reynolds numbers. The flow mechanisms responsible for this control were studied and documented in order to provide a basis for future improvements in LPT design. Data were collected using a stereo PIV system that enabled all three components of velocity to be measured. Steady VGJs were injected into a laminar boundary layer on a flat plate (non-separating boundary layer) in order to more fully understand the characteristics and behavior of the …

Size Function Based Mesh Relaxation, John David Howlett

Theses and Dissertations

This thesis addresses the problem of relaxing a finite element mesh to more closely match a size function. The main contributions include new methods for performing size function based mesh relaxation, as well as an algorithm for measuring the performance of size function based mesh relaxation methods.

Determination Of Wall Thickness And Height When Cutting Various Materials With Wire Electric Discharge Machining Processes, Sangseop Kim

Theses and Dissertations

This thesis looks at the capabilities of cutting thin webs on Wire EDM machines that are difficult or impossible to machine using conventional methods. Covered is an investigation of how different material and web thickness affect the capability of machining thin-walled parts.

Five different metals are used for the test; Aluminum 6061 T6, Yellow Brass SS360, 420 Stainless Steel, D2 unheat-treated tool steel 25-30 RC, and D2 heat-treated tool steel 60-65 RC. The small parts were cut to a 6mm (0.2362 inch) height with six different wall thicknesses: 0.30mm (0.0118 inch), 0.25mm (0.0098 inch), 0.20mm (0.0078 inch), 0.15mm (0.0059 inch), …

Structure From Motion Using Optical Flow Probability Distributions, Paul Clark Merrell

Theses and Dissertations

Several novel structure from motion algorithms are presented that are designed to more effectively manage the problem of noise. In many practical applications, structure from motion algorithms fail to work properly because of the noise in the optical flow values. Most structure from motion algorithms implicitly assume that the noise is identically distributed and that the noise is white. Both assumptions are false. Some points can be track more easily than others and some points can be tracked more easily in a particular direction. The accuracy of each optical flow value can be quantified using an optical flow probability distribution. …

A Tool Wear Comparative Study In Turning Versus Computer Simulation In 1018 Steel, Woodrow D. Miner

Theses and Dissertations

The material removal process uses cutting tools in order to produce the desired shape of the workpiece. Tool wear has been a problem for cutting tools, since cutting tools wear and break. Research has been accomplished in the tool wear field for tool life and more recently tool wear. The computer generation has created a method to simulate the material removal process. These computer simulations model the cutting tool reaction with the workpiece. Many of the simulation models use finite element analysis to calculate the reaction of the cutting tool. Different finite element models are being used throughout the world …

Dual-Stage Thermally Actuated Surface-Micromachined Nanopositioners, Neal B. Hubbard

Theses and Dissertations

Nanopositioners have been developed with electrostatic, piezoelectric, magnetic, thermal, and electrochemical actuators. They move with as many as six degrees of freedom; some are composed of multiple stages that stack together. Both macro-scale and micro-scale nanopositioners have been fabricated. A summary of recent research in micropositioning and nanopositioning is presented to set the background for this work. This research project demonstrates that a dual-stage nanopositioner can be created with microelectromechanical systems technology such that the two stages are integrated on a single silicon chip. A nanopositioner is presented that has two stages, one for coarse motion and one for fine …

Manufacturing Quality Of Carbon/Epoxy Isotruss (R) Reinforced Concrete Structures, David Thomas Mccune

Theses and Dissertations

This thesis explores the quality of hand-manufactured carbon-epoxy IsoTruss® grid structures for use as reinforcement in concrete piles. Large IsoTruss® grid structures were manufactured and embedded in 14.0" (35.6 cm) diameter concrete to create IsoPiles™. The IsoPiles™ were designed to have flexural characteristics similar to steel reinforced concrete piles of equal diameter. Bending stiffness was matched based on the longitudinal members. A method for comparing transverse steel reinforcement to helical IsoTruss® members was developed, along with equations to facilitate the design of IsoTruss® structures with rounded nodes.

Compression tests were performed on 3.0 ft (0.91 m) long sections taken from …

Algal Succession And Nutrient Dynamics In Elephant Butte Reservoir, Eric J. Nielsen

Theses and Dissertations

A water quality model was created for Elephant Butte Reservoir, New Mexico to understand nutrient dynamics and algal response during a three year period. The model chosen for this study was CE-QUAL-W2 because of its proven ability to represent hydrodynamics and the ability to represent multiple algal groups. Elephant Butte has been subject to large algal blooms. This study examined the phosphorus loading into the reservoir to see if it could sustain the observed algal growth. Data showed that the amount of bioavailable phosphorus was more than enough to support large blooms. This study also was an initial attempt to …

Developing A Design Space Model Using A Multidisciplinary Design Optimization Schema In A Product Lifecycle Management System To Capture Knowledge For Reuse, Nathaniel Luke Fife

Theses and Dissertations

Parametric strategies for design automation and optimization can have a big impact on engineering design. When parametric tasks and optimization frameworks and methods are combined, theses strategies can be used to make up what is known as a multidisciplinary design optimization (MDO) schema. Knowledge of a design space can be modeled by using a MDO schema to represent the design process. However, current MDO frameworks used to create this schema lack the scope to capture enterprise wide knowledge for reuse and collaboration. Concurrent with the development of MDO, many companies are moving toward increased use of product lifecycle management (PLM). …

Floodplain And Flood Probability Mapping Using Geodatabases, Douglas J. Gallup

Theses and Dissertations

This research presents methods of creating digital maps for floodplain delineation and flood probability studies and storing them in a geodatabase. Methods for creating a geodatabase for water resources outside of a GIS are presented. The geodatabase follows the ArcHydro data model. Methods are also shown for creating digital flood maps and storing them in the geodatabase. These flood maps, defining the floodplain boundary and flood probability, are stored in a digital format ready for use in a FEMA flood hazard project, allowing for better archival methods and reproducibility.

In-Fiber Optical Devices Based On D-Fiber, Kevin H. Smith

Theses and Dissertations

This dissertation presents the fabrication and analysis of in-fiber devices based on elliptical core D-shaped optical fiber. Devices created inside optical fibers are attractive for a variety of reasons including low loss, high efficiency, self-alignment, light weight, multiplexibility, and resistance to electromagnetic interference. This work details how D-fiber can be used as a platform for a variety of devices and describes the creation and performance of two of these devices: an in-fiber polymer waveguide and a surface relief fiber Bragg grating. In D-fiber the core is very close to the flat side of the ‘D’ shape. This proximity allows access …

Statistical Investigation Of Friction Stir Processing Parameter Relationships, Jonathan H. Record

Theses and Dissertations

Friction Stir Welding (FSW) is an emerging joining technology in which basic process understanding is still inadequate. Knowledge of FSW parameter relationships is needed to better understand the process and implement proper machine control. This study utilized a 3-factor, 3-level factorial design of experiments to investigate relationships between key process inputs and measured output parameters. All experiments utilized 7075-T7 aluminum and a threaded pin tool with a 25.4 mm shoulder diameter, 4.76 mm pin length, and 7.9 mm pin diameter. Spindle speed, feed rate, and tool depth were varied throughout 54 welds while X, Y, and Z forces, X torque, …

Simulation-Based Design Under Uncertainty For Compliant Microelectromechanical Systems, Jonathan W. Wittwer

Theses and Dissertations

The high cost of experimentation and product development in the field of microelectromechanical systems (MEMS) has led to a greater emphasis on simulation-based design for increasing first-pass design success and reliability. The use of compliant or flexible mechanisms can help eliminate friction, wear, and backlash, but compliant MEMS are sensitive to variations in material properties and geometry. This dissertation proposes approaches for design stage uncertainty analysis, model validation, and robust optimization of nonlinear compliant MEMS to account for critical process uncertainties including residual stress, layer thicknesses, edge bias, and material stiffness. Methods for simulating and mitigating the effects of non-idealities …

The Purposes And Evaluation Methods For State Residential General Contractor Licensing, James Ellis Fenn

Theses and Dissertations

The main topic in the licensing debate is whether licensing affects construction quality. Available literature and previous studies indicate that it does not. The real question is not whether licensing improves quality, but whether the improving quality is the actual purpose of licensing. There is little information available on the purpose of licensing as defined by state licensing departments as well as a general lack of information on how states evaluate whether licensing is fulfilling the intended purpose. In order to effectively resolve some of the issues surrounding the construction licensing debate, the true purpose of licensing and the methods …

An Analysis Of Seawinds Simultaneous Wind/Rain Retrieval In Severe Weather Events, Jeffrey R. Allen

Theses and Dissertations

Scatterometers, such as SeaWinds, can provide wide coverage of ocean surface winds. They estimate near-surface wind vectors by relating measured radar backscatter to a geophysical model function. However, SeaWinds measurements are also sensitive to rain, and conventional wind retrieval degrades in rainy conditions. An algorithm that exploits SeaWinds' sensitivity to both wind and rain has be developed. This algorithm, termed simultaneous wind/rain retrieval, retrieves both wind vectors and rain rates for a given ocean area. Instantaneous results of simultaneous wind/rain retrieval in Hurricane events is analyzed through comparison with the NEXRAD ground-based radar system. This comparison allows validation of retrieved …

Finite Approximations To The Second-Order Properties Closure In Single Phase Polycrystals, Brent L. Adams, Xiang Gao, Surya R. Kalidindi

Faculty Publications

This work was supported at Brigham Young University and Drexel University by a grant from the US Army Research Office, through the Metallurgy Program headed by Dr. David Stepp. Extension of the first-order theory of microstructure design to considerations of morphological texture is addressed in this paper. The main challenges include the r-interdependence of the 2-point correlation functions of lattice orientation, construction of the corresponding microstructure hull, and its corresponding properties closure(s). It is shown that the correlation functions can be expressed in terms of an intermediate construct, called the texture function; the correlation functions have quadratic dependence in the …

Real-Time Evaluation Of Vision-Based Navigation For Autonomous Landing Of A Rotorcraft Unmanned Aerial Vehicle In A Non-Cooperative Environment, Dale D. Rowley

Theses and Dissertations

Landing a rotorcraft unmanned aerial vehicle (RUAV) without human supervision is a capability that would significantly broaden the usefulness of UAVs. The benefits are even greater if the functionality is expanded to involve landing sites with unknown terrain and a lack of GPS or other positioning aids. Examples of these types of non-cooperative environments could range from remote mountainous regions to an urban building rooftop or a cluttered parking lot. The research of this thesis builds upon an approach that was initiated at NASA Ames Research Center to advance technology in the landing phase of RUAV operations. The approach consists …

Flexural Behavior Of Carbon/Epoxy Isotruss Reinforced-Concrete Beam-Columns, Monica Joy Ferrell

Theses and Dissertations

This thesis quantifies the flexural behavior (strength, stiffness and failure) of IsoTruss®-reinforced concrete beam-columns for use in deep foundation pile applications. Four-point bending tests were performed in the laboratory on two instrumented carbon/epoxy IsoTruss® reinforced concrete piles (IRC piles) and two instrumented steel reinforced concrete piles (SRC piles). The piles were approximately 14 ft (4.3 m) in length and 14 in (36 cm) in diameter and were loaded to failure while monitoring load, deflection, and strain data. The steel and IsoTruss®® reinforcement cages were designed to have equal flexural stiffness to permit a relative strength comparison. Moment curvature diagrams reveal …

Sea Ice Mapping Method For Seawinds, David G. Long, Hyrum S. Anderson

Faculty Publications

A sea ice mapping algorithm for SeaWinds is developed that incorporates statistical and spatial a priori information in a modified maximum a posteriori (MAP) framework. Spatial a priori data are incorporated in the loss terms of a Bayes risk formulation. Conditional distributions and priors for sea ice and ocean statistics are represented as empirical histograms that are forced to conform to a set of expected histograms via principal component filtering. Tuning parameters for the algorithm allow adjustments in the algorithm's performance. Results of the algorithm exhibit high correlation with the Remund-Long sea ice mapping algorithm for SeaWinds and the Special …