Engineering Commons^™

Identifying Influential Assets In Higher Order Interdependent Infrastructure Networks Through Population Impact, Akshat Chulahwat, Emad M. Hassan, Mersedeh Tariverdi, Miguel Nunez-Del-Prado, Hussam Mahmoud

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A significant increase in catastrophic events worldwide has had a disastrous impact on the built environment, as these disruptive events devastate critical infrastructure lifelines, resulting in a substantial reduction of services across a community. Management of critical infrastructure assets is essential, and this can be achieved by optimal resource allocation to key assets within interconnected systems. The majority of current literature focuses on capturing the behavior of infrastructure systems individually, which presents a computational problem when dealing with complex, interdependent infrastructure systems. In this study, a comprehensive framework to evaluate a type of influence metric for ranking node and edge …

The Equity Implications Of Pecuniary Externalities On An Electric Grid, Charles Sims, Gasser G. Ali, J. Scott Holladay, Tim Roberson, Chien Fei Chen, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The adoption of rooftop photovoltaic (PV) systems can create upward pressure on retail electricity rates as utilities are forced to spread their fixed costs of generation and transmission across a smaller customer base. Since high-income households are more likely to purchase PV systems, low-income households may be disproportionately impacted by these rate increases. Using a novel combination of agent-based computational economic modeling and a choice experiment of rooftop solar adoption, we show how this pecuniary externality between low- and high-income customers increases low-income electricity bills by 10% in an area with some of the highest poverty rates in the United …

Evaluating Crumb Rubber Modified (Crm) Asphalt As A Sustainable Binder Alternative For High-Friction Surface Treatments, Abdallah Aboelela, Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High-friction surface treatments (HFSTs) are widely applied to improve pavement safety by enhancing long-term skid resistance. Although epoxy resins are commonly used due to their strength and durability, their high cost, susceptibility to delamination, incompatibility with substrates of flexible pavements, and adverse environmental concerns limit their long-term performance. This study presents crumb rubber modified (CRM) asphalt as a sustainable alternative binder for HFST applications. CRM binders offer high performance and compatibility with existing pavement surfaces, cost effectiveness and reduced environmental impacts as compared to epoxy binders. In addition, the binder development utilizes enhanced recycling technologies for interacting with used tire …

Data Center Composite Load Model Parameters’ Tuning, Mohammed Sleiman, Amirreza Sahami, Oluwatimilehin Adeosun, Nathaniel Rice, Katelyn Vance

Electrical and Computer Engineering Faculty Research & Creative Works

The vast expansion of data center campuses has created concentrated and highly dynamic electrical loads that challenge traditional transmission system planning and protection studies. This paper presents a novel approach to model the load of data centers and validate their dynamic performance in a composite-load-model (CMLD) framework.

The data center has three major modules: a static element representing the static devices and busway impedance; an electronic-based element constituting power converters such as rectifiers and inverters, associated power supplies, and a motor-based element encompassing the induction nature of chillers, fans and pumps. Each module represented equivalent algebraic and differential equations depicting …

A Human Factors Analysis And Classification System (Hfacs) Approach To Compare Cardiovascular, Orthopedics, Trauma Care, And Neurosurgery, Asfandyar Khan

Doctoral Dissertations and Master's Theses

Background: Despite significant progress in patient safety, human error continues to occur at high rates in procedural settings. Traditional safety models tend to focus on retrospective incident analysis, often overlooking the systemic conditions that allow errors to occur. The Human Factors Analysis and Classification System (HFACS) offers a proactive lens to understand how and where errors emerge and is useful for identifying active and latent failures.

Objective: To evaluate the utility and reliability of the Human Factors Analysis and Classification System (HFACS) in categorizing and comparing the pattern of frequencies (events) in cardiovascular, orthopedic, trauma care, and neurosurgical procedure.

Design, …

Thermal Management With Supercritical Carbon Dioxide Under Extreme Applications, Devon Hardy

Doctoral Dissertations and Master's Theses

A unique challenge in thermal system design is minimizing the power required to operate cooling systems while maintaining effective heat removal. Traditional cooling systems utilize single-phase fluids where the heat transfer mechanisms are well understood. To meet a variety of cooling demands, a range of technologies are available, including microchannel forced convection, jet impingement, porous media, nanofluids, pin fin arrays, and film cooling, each offering distinct advantages and limitations. While the performance of single- or two-phase cooling systems are generally predictable, in extreme thermal environments, new cooling solutions are needed to improve overall system efficiency and reliability.

Supercritical fluids, particularly …

Propeller Noise Prediction Of An Urban Air Mobility Vehicle In Urban Environment, Jie Hua

Doctoral Dissertations and Master's Theses

Urban Air Mobility (UAM) vehicles operate in complex, unsteady aerodynamic environments where wake interactions, gust and turbulence significantly affect both performance and noise generation. Understanding these mechanisms is critical for developing quieter and more efficient eVTOL systems that meet future community noise and certification requirements. This dissertation focuses on the high-fidelity numerical investigation of propeller noise in three representative unsteady loading scenarios: (i) transition (tilt) flight, (ii) edgewise inflow, and (iii) wake–propeller interaction. Each case emphasizes different physical mechanisms that dominate noise generation in UAM operations. Hybrid turbulence-resolving approaches—Detached Eddy Simulation (DES) and Delayed Detached Eddy Simulation (DDES)—are coupled with …

Data Driven Design Of Ultra High Performance Concrete Prospects And Application, Bryan K. Aylas-Paredes, Taihao Han, Advaith Neithalath, Jie Huang, Ashutosh Goel, Aditya Kumar, Narayanan Neithalath

Electrical and Computer Engineering Faculty Research & Creative Works

Ultra-high-performance concrete (UHPC) is a specialized class of cementitious composites that is increasingly used in various applications, including bridge decks, connections between precast components, piers, columns, overlays, and the repair and strengthening of bridge elements. The mechanical and durability properties of UHPC are significantly influenced by factors such as low water-to-binder ratios, the inclusion of supplementary cementitious materials (SCMs), and fiber reinforcement. Machine learning (ML) has been employed to predict the performance of UHPC and optimize its mixture designs by using various raw materials. This study first provides a comprehensive review of ML applications in UHPC, focusing on predicting workability, …

From 2d To 3d: Multi-Agent Reinforcement Learning For Spectrum-Constrained Urban Air Mobility., Qingyang Li

Electronic Theses and Dissertations

Advanced Air Mobility (AAM) and Urban Air Mobility (UAM) are accelerating a transformation of air transportation but face acute spectrum congestion in dense urban environments. Reliable Control and Non-Payload Communications (CNPC) must be maintained at all times to ensure safe operations, even as fleets of aerial vehicles (AVs) transport passengers and cargo between distributed vertiports. We first develop a 2D formulation that jointly optimizes discrete headings, velocities, and spectrum allocation to minimize total mission time while satisfying quality of service (QoS) and collision-avoidance constraints, and we demonstrate significant gains over non-learning and learning baselines. Building on this 2D framework, we …

Molecular Dynamics Simulations Of Biologically Relevant Interfaces: From Tear Film Lipid Layers To Rna Adsorption On Silica Surfaces., Mahbuba Khanom

Electronic Theses and Dissertations

Molecular dynamics (MD) simulation is an important tool in biochemical sciences for studying complex molecular processes and interfacial interactions at the molecular level. Biological interfaces play key roles in processes such as ocular lubrication and biomolecular adsorption. This dissertation studies interfacial phenomena involving two distinct yet conceptually related systems: the tear film lipid layer (TFLL) at the air–water interface at the surface of the human eye, and RNA adsorption on silica surfaces. These studies provide insight into how interfacial composition, structure, and environmental conditions affect larger-scale behavior. Atomistic MD simulations were used to model the TFLL. The TFLL is essential …

Detecting Non-Axisymmetric Instabilities In Fluid-Based Manufacturing Via Multi-View Tensor Analysis., Bidusi Khadka

Electronic Theses and Dissertations

Fluid-based manufacturing processes, such as inkjet printing and electrospinning, fabricate micro- and nano-scale structures with high precision, but are prone to complex fluid dynamics exhibiting axisymmetric and non-axisymmetric instabilities. Conventional monitoring often relies on single-camera inputs and symmetry assumptions, limiting the detection of three-dimensional anomalies like jet deflection. This study presents a novel multi-view streaming video-based anomaly detection framework to address this gap. The framework employs a modified Tensor Sequential Sampling (TSS) algorithm with edge-based sampling to capture geometric spatiotemporal features of each camera view using the videos obtained from an orthogonally positioned dual-camera setup. These features are fused with …

Emerging Solid Electrolytes For Solid-State Sodium Batteries: Synthesis And Interface Study., Xiaolin Guo

Electronic Theses and Dissertations

Over the past decade, solid-state batteries have attracted significant attention as the next-generation energy storage technology due to their higher energy density and enhanced safety. Given the abundant sodium (Na) resources relative to lithium (Li), the development of sodium-based batteries has become increasingly compelling. Within a solid-state battery, the solid electrolytes (SEs) serve the dual function of (i) electronically insulating and physically separating the electrodes, and (ii) transporting ions between the anode and cathode. To meet these essential requirements, ideal SEs must process high ionic conductivity with negligible electronic conductivity, robust structural and chemical stability, a wide electrochemical window, and …

Analysis On Modifications To An Outdoor Field-Scale Rotating Algal Biofilm Reactor With A Focus On Biomass Productivity And Power Usage, Davis R. Haag

All Graduate Theses and Dissertations, Fall 2023 to Present

A rotating algal biofilm reactor (RABR) was operated outdoors for one calendar year to see how the microalgae grown were affected. The algae are grown in wastewater that contains nitrogen and phosphorous, which are elements found in fertilizer. The design used was modified from a previous design, and this project tested the modifications to see if they improved how much microalgae were grown. In February 2025, the objectives of the field study were updated to focus on growing as much microalgae as possible instead of removing as much nitrogen and phosphorous as possible. This updated design increased the fluid flow …

Enabling Scalable Camera-Based Streamflow Monitoring With Serverless Cloud Computing, Sajan Neupane

All Graduate Theses and Dissertations, Fall 2023 to Present

This thesis introduces a modern and automated method for monitoring rivers and streams using cameras and cloud-based software tools. Traditional monitoring methods often rely on sensors placed directly in the water, which can be expensive, hard to install, and difficult to maintain, especially in remote or rough terrain. In contrast, this approach uses cameras to observe water flow from a distance, offering a safer and more cost-effective alternative. However, camera systems come with their own challenges, such as collecting large amounts of image data, transferring it reliably from the field, and analyzing it quickly enough to be useful. This research …

Cognitive Dynamics In Undergraduate Engineering Education: Effects Of Need For Cognitive Closure And Achievement Goal Orientation On Cognitive Engagement, Zain Ul Abideen

All Graduate Theses and Dissertations, Fall 2023 to Present

Cognitive and motivational factors play an important role in students’ engagement during problem-solving, which can lead to academic and professional success. Among these factors, Need for cognitive closure (NFCC) and achievement goal orientation (AGO) have been studied extensively individually, but their interaction and impact on engineering students’ problem-solving is still not explored. NFCC refers to the person’s desire for quick answers, and AGO is the student’s approach to learning and success. This research investigated the impact of NFCC on gender and engineering major, and the relation between NFCC (five facets) and AGO (Mastery, Performance) at their different levels. Additionally, this …

Evaluating Use Of Multiple Hydrologic Storage Indicators To Enhance Streamflow Forecasting, Reza Morovati

All Graduate Theses and Dissertations, Fall 2023 to Present

Accurate seasonal streamflow forecasts are essential for managing water resources in the western United States, where much of the water supply depends on snow accumulation and melt. Water managers, farmers, and communities rely on these forecasts to plan for water use, prepare for droughts, and protect the environment. However, traditional forecasting methods often do not fully use all the available information about how water is stored in the landscape, such as in snowpacks, soil moisture, and groundwater. This can limit the accuracy of predictions and make water management more difficult.

This study aimed to improve streamflow forecasts by explicitly including …

Feasibility And Potential Of Electric Air Taxis For Long Distance Airport Access/Egress Trips, Atul Subedi

All Graduate Theses and Dissertations, Fall 2023 to Present

Getting to the airport is often one of the most stressful parts of a trip, especially for people who live far from the airport. In the United States, many travelers live more than an hour’s drive from a major airport, and their choices such as driving, using public transit, or paying for ride-hailing can be time-consuming, expensive, and inconvenient. A new technology, Electric Air Taxis (EATs), is being developed as a potential solution. These small, battery-powered aircraft could offer faster, cleaner, and more direct connections to airports. However, the success of EATs depends not only on the technology itself but …

Enhancing Grid Integration Of High-Power Loads Through Modular Unfolding-Based Power Conversion With Decentralized Control, Sanat R. Poddar

All Graduate Theses and Dissertations, Fall 2023 to Present

The transition to electric vehicles (EVs) is a critical step toward reducing greenhouse gas emissions and creating a cleaner, more sustainable transportation sector. However, many drivers — particularly those operating larger vehicles such as trucks and buses — face significant challenges, including limited driving range and lengthy charging times. High-power, fast-charging stations, which can rapidly replenish EV batteries, are therefore essential for mitigating these barriers and making electric transportation practical across all vehicle classes.

Despite the promise of electric vehicles, deploying high-power fast-charging stations presents significant challenges. They require large amounts of electricity, making them expensive to install, operate, and …

Design, Control, And Optimization Of Unfolding-Based Ac-Dc Topologies With Three-Port Resonant Converters For Electric Vehicle Battery Charging Applications, Aditya Zade

All Graduate Theses and Dissertations, Fall 2023 to Present

The global effort to reduce greenhouse gas emissions and reliance on fossil fuels has made electric mobility a cornerstone of sustainable transportation. This transition is driving demand for advanced charging infrastructure and more efficient power conversion systems. Power converters play a central role, not only in enabling reliable EV charging but also in integrating renewable energy sources with the grid. Because of the large amount of power involved, these converters must operate efficiently, reliably, and at low cost. Conventional high-power chargers often use two stages of conversion, which are effective but limited by size and energy losses. To overcome these …

Quicklime-Based Self-Healing Concrete For Bridge Deck Applications, Mehrnoosh Nazari

All Graduate Theses and Dissertations, Fall 2023 to Present

Concrete is one of the most widely used construction materials in the world. However, over time, it can crack and deteriorate, especially on roads and bridges exposed to harsh weather and deicing salts. Inspired by the long-lasting durability of ancient Roman concrete, this study explores the self-healing capabilities of concrete incorporating quicklime (calcium oxide) aggregates to extend the service life of bridge decks. For this purpose, three concrete mixtures were developed using local materials: one without quicklime (C-Q 0%) and two with 2% (C-Q 2%) and 4% quicklime (C-Q 4%). These mixtures were tested for fresh properties, strength, durability, and …

Developing Standardized Testing Datasets For Benchmarking Automated Quality Control Algorithm Performance With Aquatic Sensor Data, Ehsan Kahrizi

All Graduate Theses and Dissertations, Fall 2023 to Present

Advances in water monitoring technologies have led to a large increase in the amount of data collected from rivers, lakes, and other water systems. However, ensuring that these data are accurate and reliable remains a major challenge. Traditional data quality checks are done manually by a technician, which can be slow, inconsistent, and not practical for real-time monitoring. This research addresses these challenges by developing standardized datasets for testing computer-based methods that automatically detect and correct errors in water data. Using information from the Logan River Observatory in northern Utah, we created a step-by-step process to identify, categorize, and label …

Unveiling The Interactions Between The Antibiotic Resistome And Microplastics Influenced By Trace Elements And Ppcps In Wastewater Treatment Plants, Tahira Tasneem Rahman

All Graduate Theses and Dissertations, Fall 2023 to Present

Antibiotic resistance is a growing global concern, and wastewater treatment plants play a critical role in controlling its spread. These facilities process water containing microplastics (small plastic particles), trace elements like copper and zinc, and chemicals from everyday products like pharmaceuticals and personal care products. Together, these pollutants may contribute to the survival and spread of bacteria containing antibiotic resistance genes, but their combined effects are not fully understood. This study investigated how these pollutants behave and interact in wastewater treatment plants using two approaches: direct monitoring of real treatment plants and controlled lab experiments using synthetic wastewater. Results showed …

Reconstruction And Texturing Of 3d Surfaces From Fused Low-Cost Aerial Lidar And Optical Imagery, Samuel Kiguthi

All Graduate Theses and Dissertations, Fall 2023 to Present

Drones equipped with laser scanners (LiDAR) and cameras capture detailed 3D scenes. Combining the laser points with photos builds realistic, photo-textured 3D maps used in surveying, agriculture, and infrastructure planning. Conventional methods to create these maps often misrepresent inward shapes such as doorways, overhangs, and outcrops. These shapes are misrepresented because drones mainly view top surfaces and do not collect significant data on vertical or hidden areas.

This study introduces a surface-reconstruction method that groups LiDAR points into clusters, reconstructs smooth surfaces for each cluster, and uses information from recorded camera poses to stitch clusters together. Tests on real drone …

Bim-To-Brick: Using Graph Modeling For Iot/Bms And Spatial Semantic Data Interoperability Within Digital Data Models Of Buildings, Filippo Vittori, Fu Chuan Tan, Laura Anna Pisello, Adrian Chong, Cristina Piselli, Clayton Miller

Research Collection College of Integrative Studies

The holistic management of a building requires data from heterogeneous sources such as building management systems (BMS), Internet-of-Things (IoT) sensor networks, and building information models (BIM), all aimed at environmental well-being. Data interoperability is a key component to eliminate silos of information, and using semantic web technologies like the BRICK schema, an effort to standardize semantic descriptions of the physical, logical, and virtual assets in buildings and the relationships between them, is a suitable approach. However, current data integration processes can involve significant manual interventions. This paper presents a methodology to automatically collect, assemble, and integrate information from a building …

Cross-Domain Disaggregation Of Electricity For Heating In All-Electric School Buildings – Learning From School Buildings With District Heating, Synne Krekling Lien, Ada Canaydin, Clayton Miller, Chun Fu, Hussain Kazmi, Jayaprakash Rajasekharan

Research Collection College of Integrative Studies

Electric heating is widespread in Norwegian buildings and significantly contributes to peak loads in the electricity grid. Non-residential buildings are typically heated either by district heating or a combination of electrical heating appliances. Despite its widespread use, most buildings lack sub-meters for electric heating. As a result, the true potential for energy efficiency and load flexibility from heating appliances in buildings remains unknown. Non-intrusive load monitoring and disaggregation techniques offer alternatives to sub-metering by using data-driven methods to extract electricity use for appliances from time-series data. However, little research has been conducted on disaggregating electrical heating loads from low-resolution data, …

Separating The Control Of Moving And Holding In Human Post-Stroke Arm Paresis, Alkis M. Hadjiosif, Kahori Kita, Scott T. Albert, Robert A. Scheidt, Reza Shadmehr, John W. Krakauer

Biomedical Engineering Faculty Research and Publications

Moving and holding-still (holding) have been posited to be separately controlled. The paretic arm after stroke exhibits different abnormalities during rest vs. movement, providing an opportunity to ask whether control of these behaviors is independently affected in stroke. We quantified resting postural abnormalities in human stroke patients by measuring their biases in force production as they held their hand still in various locations in a planar workspace and then assessed whether these resting force biases influenced reaching in the same workspace. Patients displayed marked resting force biases at each location, even when the arm was supported. However, these …

Effective Transfer Of Tumor Annotations From Hematoxylin And Eosin To Fluorescence Images Of Breast And Lung Tissues, Tianling Niu, Emi Ampo, Julie M. Jorns, Mollie Patton, Tongtong Lu, Dong Hye Ye, Tina Yen, Bing Yu

Biomedical Engineering Faculty Research and Publications

Significance: Accurate transfer of annotations from histological images to fluorescence images is essential in developing deep learning (DL)-based optical imaging systems for intraoperative assessment of tumor margins. Manual annotation is time-consuming, prone to interobserver variability, and impractical for large-scale datasets.

Aim: We present a semi-automated method that can effectively transfer tumor annotations from pathologist-annotated hematoxylin and eosin (H&E) images to fluorescence images captured using microscopy with ultraviolet surface excitation (MUSE). This method is not intended for intraoperative use but rather to facilitate the creation of annotated datasets for DL model development.

Approach: Our semi-automated method consists of nonrigid image registration, …

The Comparison Of Dixon–Mood And 1/Nf Methods For Fatigue Limit Estimation Of 17–4 Ph Stainless Steel (H900), Arthur Pallar Pallar

Masters Theses

This study compares two methods for estimating the fatigue limit of 17-4 PH stainless steel (H900): the Dixon–Mood staircase and Kujawski 1/Nf linear method. Tests were conducted on an MTS Acumen 3 kN system under axial tension–tension loading at R = 0.1 and 50 Hz, following the standard practice defined in ASTM E466-15. Flat specimens were fabricated by water-jet cutting and polished. Tensile tests verified mechanical properties consistent with published data for the H900 condition. Fifteen specimens tested by the staircase method yielded a mean fatigue limit of 1138 MPa. The 1/Nf analysis using four specimens produced 1159 MPa, 2 …

Piezoelectric Energy Harvesting From Roadways: Challenges, Advances, And Future Directions, Heba Gaber, Mohamed Abdelraheem

Faculty Publications

As the global demand for renewable energy intensifies, piezoelectric energy harvesting from roadways has emerged as a promising avenue for sustainable power generation. This systematic literature review analyzes 61 peer-reviewed studies to assess the feasibility, performance, and potential of integrating piezoelectric systems into roadway infrastructure. While technology faces challenges, such as high installation costs, limited energy output, and a scarcity of thorough economic evaluations, findings suggest it holds considerable promise as a supplementary renewable energy source. The review analyzes the operational characteristics and efficiencies of various piezoelectric transducers, identifies key factors influencing system performance, and evaluates recent technological advances. It …

Auction Consensus Algorithm With Loss Mechanism For Decentralized Task Allocation, Jose Rodriguez, Wenjie Dong, Constantine Tarawneh, Qi Lu

Electrical and Computer Engineering Faculty Publications

This paper presents an Auction-Consensus Algorithm with a Loss Mechanism (ACALM), a decentralized task allocation method for multi-robot systems that enhances the existing Consensus-Based Auction Algorithm (CBAA) by incorporating a novel loss propagation mechanism. In contrast to purely greedy bidding strategies, it enables agents to dynamically update task priorities based on the accumulated loss from previously unsuccessful bids. This extended work reduces globally inefficient allocations caused by early suboptimal decisions. The proposed approach is evaluated through large-scale simulations in thousands of randomized scenarios and swarm sizes ranging from 5 to 120 robots. Compared to existing CBAA and GCAA algorithms, ACALM …