Engineering Commons^™

Wind Tunnel Test Study On Wind-Resistant Performance Of Shuangliu Yangtze River Bridge, Li Xiukun, Wu Xuewei, Yang Can, Peng Xiaobin, Huang Zhiwen

Journal of China & Foreign Highway

The main bridge of Shuangliu Yangtze River Bridge on the Xingang Expressway in Wuhan City is a single-span suspension bridge with a main span of 1 430 m and a bridge tower of 272.75 m.The stiffening girder is in the form of a closed flat steel box girder with a width of 50.5 m.In order to study the wind-resistant performance of the bridge during operation,the performance of vortex-induced vibration of the girder was tested through wind tunnel tests of section model with two different geometric scales of 1∶60 and 1∶30,respectively.The sensitivity of the vortex-induced vibration response to the structural damping …

Application Of Forward-Ba Ck Ana Lysis And Difference Iteration Method For Solving Initial Cable Tension Of Arch Bridge, Xu Yufeng, Li Zihui, Zhang Zhantao

Journal of China & Foreign Highway

This article presented a method that c ombined the forward-back analysis method and the difference iteration method to solve the initial cable tension according to the state of a built bridge for an arch bridge.Given the known target state of the bridge,a reasonable set of initial cable tensions was determined as the initial value of iteration by the forward-back method.These initial tensions were then applied to the calculation model based on the actual construction process.Through the difference iteration method,the initial cable tensions were optimized.The results show that the method can effectively determine the final cable tension that meets engineering precision …

Experimental Study On Bending And Shear Performance Of Joint With Looped Reinforcement In Prefabricated Components, Liu Zhiquan, Hu Ke, Shi Xuefei, Zhong Yuzhuo

Journal of China & Foreign Highway

A joint with looped reinforcement is a type of steel bar connection structure with wet joints characterized by quick construction.In order to study the bending and shear stress performance and load-bearing capacity characteristics of the wet joints,four bearing capacity tests for bending and shear were designed and conducted for common application scenarios.The load,strain,and displacement changes of the specimens during the test process were tested,and the failure characteristics,load–displacement changes,and ultimate bearing capacity of this type of wet joint were analyzed.The results show that the wet joint with looped reinforcement has good ductility and conforms to the design principles of reinforced concrete.The …

Bending Moment Calculation And Reinforcement Recommendations For Cast-In-Place Cover Slabs In Slab Culverts, Li Yukun, Wan Kecheng, Fu Fulin

Journal of China & Foreign Highway

To address the complexity and lack of practical methods for calculating bending moments of cast-in-place cover slabs in slab culverts,the slabs were simplified as one-way slabs with a pair of opposing edges simply supported and the other pair of edges free.Theoretical formulas for calculating the bending moments within the slabs under uniformly distributed loads were derived using elastic theory.The accuracy of the theoretical formulas was validated through case studies via finite element software.Various combinations of length,width,and fill heights exist in highway projects,making the use of theoretical formulas for bending moment calculations cumbersome.Therefore,a simplified method for calculating maximum bending moments in …

Research On Whole-Hole Testing Technology For Under-Anchor Tension In Prestressed Concrete Girders, Zhu Jianzhao, Dong Hao, Gu Jungang, Feng Lu, Li Shuyang, Zhang Shoulong, Chen Chaung

Journal of China & Foreign Highway

This study aims to propose a new testing method,namely whole-hole back-pull testing technology,to reduce costs and increase efficiency in under-anchor tension testing,effectively addressing the engineering challenges of large testing volume and tight schedules.Based on the principle of the traditional back-pull method,the mechanism of whole-hole back-pull testing technology was explained through theoretical analysis and formula derivation.Technical optimization was carried out in conjunction with experimental research,and a complete application method was proposed.A feasibility analysis was carried out.The study obtained the simplified mechanical model and typical test curves of the whole-hole back-pull testing technology and proposed a formula and application method for determining …

Settlement Mechanism And Re Inforcement Measure For Large-Diameter And Small-Clearance Parallel P Ipe Jacking Undercrossing Complex Building, Tang Gang, Huang Wen Jie, Zhang Wenbo, Li Wenjie, Liang Bin

Journal of China & Foreign Highway

This study aims to study the settlem ent changes and distribution of various parts of a complex building during the construction of a large-diameter and small-clearance parallel pipe jacking undercrossing complex building.On the basis of the pipe jacking project of water quality guarantee engineering 2# for Tiegang –Shiyan Reservoir in Shenzhen,the settlement mechanism of pipe jacking undercrossing construction was analyzed.Through numerical simulation,the influence of the presence or absence of grouting reinforcement,and parameters such as longitudinal spacing and burial depth of pipe jacking on the variation trend and distribution law of building settlement was analyzed.The theoretically predicted values,numerical simulation values,and on-site …

Bridge Damage Detection And Bim Localization Methods Based On Image Recognition, Li Yu, Guo Hongjun

Journal of China & Foreign Highway

To overcome insufficient information of 2D detection data in traditional bridge maintenance,which hinders precise decision-making,this study proposed an automated method based on deep learning and structure from motion (SfM ) technology,which realized the complete process from image recognition to the accurate mapping of damage information in a building information model (BIM ).First,the YOLOv 8 deep learning model was used to automatically detect bridge surface damage.Second,the SfM technology was applied for the local 3D reconstruction of the damage area and to determine the 3D coordinates of the damage.Then,the least squares method was used to align the local coordinate system with the …

Bending Capacity And Strengthening Design With Bonding Steel Plates Of Concrete Sections In French Standards, Wu Zi

Journal of China & Foreign Highway

In the French general technical clauses widely used in Francophone African countries,only the calculation principles for the bending capacity of normal concrete sections are provided,with explicit formulas not listed,and the strengthening design of structures is not involved.According to the fundamental principles of concrete structures and French standard regulations,the calculation formulas for the bending capacity of normal concrete sections were derived.On the basis of the assumptions of strengthening design,calculation formulas for strengthening with bonding steel plates were derived.Through practical engineering calculations conducted on the VDN Expressway project in Senegal,the applicability and reliability of the proposed formulas were verified.This study can offer …

Quantitative Evaluation Of Tunnel Rock Mass Integrity Based On Mwd Technology, Zhang Kunmu, Peng Hao, Liang Ming, Han Yu, Song Guanxian

Journal of China & Foreign Highway

In tunnel construction,the quantitative evaluation of rock mass integrity heavily relies on information from the exposed face,and there are challenges when drilling data is used for integrity evaluation.To this end,this study introduced a novel method for quantitative evaluation of rock mass integrity during drilling,integrating numerical statistics with machine learning.A substantial dataset of digital drilling data was collected,covering three common types of rock mass integrity:relatively intact,relatively fractured,and fractured.Subsequently,a high-performance random forest model for the classification of rock mass integrity was developed through data preprocessing and hyperparameter optimization.The interpretability of the model ’s predictive results was enhanced using Shapley additive explanations (SHAP …

Object Detection And Tracking Based On Fusion Of Radar And Camera On Highway Side, Zeng Yongqiang, Zhang Yonghua, Zhao Hui, Liu Xin, Xu Mingsheng, Shen Jianwei, Hu Zhiwei, Chen Zhenquan

Journal of China & Foreign Highway

Camera is the most widely used sensor in intelligent transportation systems (ITS),but the decline of detection and positioning accuracy caused by target occlusion and external environment interference has always been an important factor restricting the development of ITS.In order to solve this problem,a multi-mode fusion target detection and tracking method based on millimeter-wave radar (MWR ) and camera on highway side was designed.Compared with cameras,high-resolution MWR had better measurement accuracy and weather robustness,serving as a better complement to camera perception.The proposed method used the center point-based radar and camera fusion algorithm for target detection and adopted the greedy algorithm for …

Green Ai-Enhanced Deep Learning Model For Breast Cancer Detection And Classification In Mammography Images: Bc-Net-512, Nesma Abd El-Mawla, Mohamed A. Berbar, Nawal A. El-Fishawy, Mohamed A. El-Rashidy

Mansoura Engineering Journal

This study champions a sustainable approach for developing a Deep Learning (DL) model for medical image analysis, specifically focusing on breast cancer (BC) detection in mammograms. By prioritizing low-computing algorithms to achieve high diagnostic accuracy while minimizing the model's environmental footprint, that aligns with the principles of Green AI. In this paper, an innovative architecture called BC-Net-512 was constructed for the classification of BC mammography. It is composed of lightweight Convolutional Neural Network (CNN) blocks for texture, density, and structure feature extraction and detection, a thin, fully connected layer for learning complex patterns and correlations in the extracted features, and …

Impact Of Ethanol On The Evolution Of One-Step Synthesized Gold Nanoplates And Nanostars And Their Effects On Raman Signal Enhancement, Ananda Fania, Nonni Soraya Sambudi, Kirana Yuniati Putri, Yuliati Herbani, Affi Nur Hidayah

Makara Journal of Science

Gold nanoplates and nanostars were synthesized from a gold metal salt solution (HAuCl₄) using a one-step synthesis method of ultraviolet C (UVC) light irradiation. The gold salt solution was mixed with ethanol in 6 mL with the following ratios: (1.5:4.5, 3:3, and 4.5:1.5), and subsequently irradiated with UVC light. Changes in localized surface plasmon resonance (LSPR) shifts were observed in real time at 30-min intervals for 2 h. The synthesis process produces gold nanoplates. While gold nanostars were synthesized from a solution of gold salt combined with ethanol, ascorbic acid, and AgNO₃, maintaining a consistent ratio …

Latent Action Trajectory Optimization, Rahul Milind Kandekar

Master's Theses

Learning from demonstrations offers a path to bypass the sample inefficiency of reinforcement learning, but obtaining action-labeled expert demonstrations remains expensive and often impractical. Learning from Observations (LFO) addresses this by learning policies from observation-only demonstrations. Recent LFO work relies heavily on behavior cloning: VPT and LAPO use observation-only data combined with limited action labels to train BC policies, while AIME offers an alternative policy inference approach but requires the majority of its training data to have action labels. Through systematic experiments in the Lunar Lander environment, we investigate whether latent action methods can function when state and action dimensionalities …

Use Of Alaçatı Stone Aggregate In Conventional And Self-Consolidating Concretes, Tahir Kemal Erdem

Journal of Sustainable Construction Materials and Technologies

Alaçatı stone or Alapietra stone is widely used mostly for building cladding. However, its production and use in the construction sites generate high amounts of waste (debris), causing environmental pollution in Çeşme which is a touristic district. This study investigated the reuse of Alaçatı stone as lightweight aggregate (LWA) in both conventional and self-consolidating concrete (SCC) mixtures. The concretes were prepared to have three different water-to-cement ratios (w/c), which were 0.38, 0.42 and 0.48. For each w/c, a conventional concrete mixture and two SCC mixtures with 60 or 70 cm slump flow were produced by varying the superplasticizer SP content. …

A Decision Support Model For Building Material And Component Reuse In The Context Of Circular Buildings, Havva Aksel

Journal of Sustainable Construction Materials and Technologies

Construction activities cause significant environmental impacts such as waste generation, pollution, resource consumption, and land use, which are expected to increase with global construction demands. To mitigate these environmental problems, the circular building occurs as an emerging concept depending on in the circular economy, which aims to minimize waste and redefine the “end-of-life” concept by reducing, reusing, recycling, and recovering materials. The reuse of building materials and components (BMCs) from existing structures represents a crucial strategy for achieving circularity in the built environment. Within this framework, design plays a key role. However, designing with reclaimed BMCs remains complex due to …

Advancements In Perfect Matchings Within Neutrosophic Fuzzy Graphs: Theory And Applications, Muhammad Saeed, Fatima Razaq

Neutrosophic Systems with Applications

Graph theory has been widely used in exemplifying relational structure, and a greater generalization to fuzzy and neutrosophic space enables the exemplification of uncertainty, indeterminacy, and inconsistency in complex systems. Some of these extensions include the neutrosophic fuzzy graphs that provide a more detailed description of the loose relations between the vertices and the edges. However, unlike in classical graph theory, where the concepts of matching and perfect matching are well developed, very little has been studied on how the two concepts can be extended to neutrosophic fuzzy graphs. To seal this gap, the current paper develops and defines the …

Mixed Linear Equation–Inequality Systems Over The Pura Vida Neutrosophic Algebra, Muhammad Rayyanu Abdullahi, Abdulhadi Aminu

Neutrosophic Systems with Applications

This paper proposes a neutrosophic extension of max-plus algebra for solving mixed systems of linear equations and inequalities.Classical max-plus algebra is a powerful tool for modeling synchronization in discrete-event systems LastNatpreClose LastNatClose, but it assumes fully deterministic data.To incorporate uncertainty and indeterminacy, we reformulate the framework so that coefficients and variables are expressed as neutrosophic numbers

γ+λI,γ,λ∈ℝ,I∈[0,1],

where I quantifies the degree of indeterminacy.

We redefine the max-plus semiring in this neutrosophic setting, extend solvability and uniqueness results, and adapt the ONEMLP-EI algorithm LastNatpreClose LastNatClose to handle neutrosophic …

Neutrosophic Σ - Baire Spaces, R. Vijayalakshmi, F. Josephine Daisy, M. Simaringa

Neutrosophic Systems with Applications

A Neutrosophic Baire Space extends the concept of Baire Space from classical topology to the realm of neutrosophic topology which deals with sets and spaces where truth, falsehood and indeterminancy are explicitly considered. In this paper the concept of neutrosophic σ - baire spaces are introduced in Neutrosophic topological spaces. Also Neutrosophic σ - dense, Neutrosophic σ - nowhere dense, Neutrosophic σ -first category and Neutrosophic σ - second category sets are defined. Several characterizations of neutrosophic σ - baire spaces are investigated and explained using examples and the conditions under which a neutrosophic topological space becomes a neutrosophic σ …

Integrating Mcdm Techniques For Optimized Task Offloading In Multi-Uav- Enaled Mobile Edge Computing System, Amira Salam

Neutrosophic Systems with Applications

Carefully choosing a task offloading strategy is crucial for optimizing task scheduling and offloading strategies in a multi-UAV system. Regarding cost, responsiveness, scalability, and data security, each strategy has pros and cons. As a result, selecting the best offloading technique is essential to multi-UAV mobile edge computing task scheduling optimization. A methodical and well-informed decision-making process accomplishes this.

The current study introduces a new hybrid methodology for the multi-criteria decision-making (MCDM) model, known as IVNs-DEMATEL-ANP-VIKOR. The purpose of this model is to find and choose an efficient task offloading strategy. With this method, we use IVNs-DEMATEL to show how different …

Mapping Sustainability To Cybernetic-Generative Artificial Intelligence-Based Education: An Innovative Neutrosophic Orbifold-Lattice Methodology, Mona Mohamed, Ahmed A. Metwaly

Neutrosophic Systems with Applications

The lightning-fast development of artificial intelligence (AI), notably generative artificial intelligence (Gen AI) technologies, has intrigued multiple disciplines, particularly education. In this context, Large Language Models (LLMs) serve as beneficial cognitive resources that address knowledge deficits and provide tailored educational support for learners and staff. For learners, LLMs are regarded as knowledgeable educators who offer prompt, focused responses and rationales to tricky queries. Whereby LLMs for staff, Strength enhancer, automating tedious tasks, and creating intelligent resources.Gen AI’s rapid growth offers enormous obstacles for educational systems, compelling them to discover solutions for these obstacles.

Conceptually, cybernetics is leveraged for bridging the …

Cache-Conscious Sparse Matrix Dense Matrix Multiplication On Gpus, Haoqiang Guo

LSU Doctoral Dissertations

Over the past decade, high-performance deep learning has evolved into a critical research domain, driven by the demand for efficient models and high inference throughput. Deep learning architectures have shifted from stacked convolutional layers to transformer-based models, while pruning techniques and graph-structured data have established sparse matrix–dense matrix multiplication (SpMM) as a fundamental kernel—particularly in graph neural networks (GNNs). Modern GPUs, with their massive parallelism and high-bandwidth memory, offer immense potential for accelerating these workloads. While SpMM implementations using the compressed sparse row (CSR) format remain common to avoid conversion overhead, preprocessing-based methods have recently demonstrated superior potential. In GNN …

Vibrissae-Inspired Vision-Based Magnetic-Actuated Whisker, Zhixian Hu, Yi Cheng, Juan P. Wachs, Yu She

School of Industrial Engineering Faculty Publications

Tactile perception is significant for robotic operation in unstructured environments. Whisker-based sensors offer lightweight bio-inspired solutions, yet most rely on single-whisker sensing and are limited by passive interaction and constrained functionality. Here we present a circular array of eight independently actuated whiskers, each driven by a pulse-switchable permanent magnet and tracked by a camera. This design enables simultaneous multi-point sensing and coordinated actuation, supporting diverse functions. Quantitative analyses demonstrate accurate pixel-to-physical mapping, consistent pixel-to-force characterization, and long-term repeatability. In this work, we show that an vibrissae-inspired vision-based magnetic-actuated whisker array integrating distributed perception with active interaction achieves reliable physical mapping, …

Characterization And Control Of Rod-Like Soft Robots, Tianrui Li

Mechanical Engineering Research Theses and Dissertations

Micro-scale robotic systems have garnered significant interest for applications in micromanufacturing and biosensing, yet quantitative design rules linking geometry, stiffness distribution, and magnetic actuation to locomotion performance at low Reynolds number remain limited. This thesis investigates magnetically actuated rod-like soft robots composed of hydrogel filaments with embedded micro-magnets and tunable hard:soft length ratios. Four- and eight-magnet swimmers with hard:soft ratios ranging from 1:1 to 2.5:1 and 4:3:1 are fabricated using a simple molding-and-insertion process and tested in water and silicone oil. A triaxial Helmholtz coil system generates rotating magnetic fields from 1 to 10 Hz, and a custom image-processing pipeline …

Accurate Prediction Of Geometrical Parameters Of An Ultra-Broadband Metamaterial Absorber Using Machine Learning, Md. Rezwan Ahmed, Oishi Jyoti, Pritu Parna Sarkar, Mohammod Abdul Motin, Md. Selim Habib, Md. Samiul Habib

Electrical and Computer Engineering Faculty Publications

In this paper, we systematically demonstrate the design and analysis of a new type of ultra-broadband tunable metamaterial perfect absorber (MPA) comprising a top vanadium dioxide (VO2) based patterned resonating patch, a continuous metallic film at the bottom, and an intermediate dielectric substrate having a thickness of only 0.18 at the center working frequency. The simulation results reveal that the absorber achieves a bandwidth of 7.26 THz, ranging from 5.40 THz to 12.66 THz, with more than 90% absorptance and an average absorption of 98.21% under normal incidence of the incoming THz wave. Furthermore, absorptance exceeding 99% is achieved between …

Integrated Chitosan-Based Coagulation And Microbubble Pre-Treatment For Improved Microplastic Fibre Removal From Water, Nimesha Thathsarani, Mohadeseh Najafi, Mehdi Khiadani, Muhammad Rizwan Azhar, Masoumeh Zargar

Research outputs 2022 to 2026

Microplastic fibres (MPFs) dominate treatment plant influents but are difficult to remove due to their morphology, composition and low density, limiting the effectiveness of coagulation flocculation pre-treatment. Integrating coagulation-flocculation with microbubble introduction offers a sustainable route to improve MPF removal, yet conventional inorganic coagulants often require high dosages, show strong pH dependence, and pose environmental risks. Chitosan is a biodegradable and non-toxic green alternative, but its application is limited due to its low solubility and pH sensitivity. In this study, two amphoteric derivatives of Chitosan have been successfully developed: CMC-CTA, produced by modifying carboxymethyl Chitosan (CMC) with 3-chloro-2-hydroxypropyl trimethyl ammonium …

Thermoeconomic Optimization Of Climate-Adaptive Solar And Wind Multi-Generation Systems Using Artificial Intelligence And Thermal Energy Recovery, Ehsanolah Assareh, Nima Izadyar, Emad Tandis, Mehdi Khiadani, Amir Shahavand, Neha Agarwal, Arian Gerami, Ahmed Rezk, Minkyu Kim, Reza Kord, Tahereh Pirhoushyaran, Mehdi Hosseinzadeh, Saleh Mobayen

Research outputs 2022 to 2026

This study presents a hybrid multi-generation energy system designed to overcome solar intermittency while meeting the global demand for integrated delivery of electricity, water, cooling, and sustainable fuels in the transition to decarbonization. The engineering application integrates solar thermal and wind energy with a modified Brayton cycle, a Steam Rankine Cycle (SRC), and a Thermoelectric Generator (TEG) to simultaneously produce electricity, fresh water via Reverse Osmosis (RO), hydrogen and oxygen via Proton Exchange Membrane Electrolyzer (PEME), and cooling (via absorption chiller) within a unified optimization framework. The system was modeled using Engineering Equation Solver (EES) and optimized via Response Surface …

A Modular Design And Construction Framework For Enhancing The Sustainability Of National Housing Projects In Egypt, Ayman Ahmed Ezzat, Farah Ibrahim El Sahzly

Mansoura Engineering Journal

Egypt’s national housing sector faces mounting sustainability challenges due to outdated design and construction practices that cause material waste, high costs, and inefficient resource use. This study develops a framework for integrating modular design and construction principles into Egypt’s National Housing Projects (NHPs) to strengthen their social, economic, and environmental sustainability. A mixed-method approach combined a literature review, case studies, and a survey of Egyptian Architectural Design Firms (ADFs). The literature review revealed a global consensus on the benefits of modular design and construction, such as improved efficiency, reduced waste, and faster project delivery, yet found limited adoption in Egypt …

Financial Risk Trends During Covid-19: A Comparative Analysis Of Three Major U.S. Airlines (2020-2022), Kamanda Mosongo

The Journal of Purdue Undergraduate Research

No abstract provided.

Analyzing Ethics Education Strategies In Biomedical Engineering Programs, Sanjana Prashanth

The Journal of Purdue Undergraduate Research

No abstract provided.

Application Of Reinforcement Learning To Precision Aerial Delivery System Control In Adverse Wind Conditions, Radman Zarbock

The Journal of Purdue Undergraduate Research

Precision aerial delivery systems (PADS) are a subset of airdropped parachute-leveraging package delivery systems that use autonomous guidance, navigation, and control (GNC) to reach targets with high degrees of accuracy. This technology emerged in the 1990s, and strides have been made since to improve the reliability of traditional physics-based controllers that guide PADS. However, these algorithms still struggle to deliver acceptable performance results when PADS are subjected to austere operating environments, such as those with unpredictable wind. Building on a foundational study in 2022 that used artificial intelligence (AI) and machine learning to improve PADS GNC performance, this study aims …