Engineering Commons^™

Microstructure And Properties Of Oxide Dispersion-Strengthened Alloys, Ertugrul Demir, Seung Min Ha, Anish Ranjan, Xingshuo Zhang, Aaron Penders, Mukesh Bachhav, Xiaochun Li, Lin Shao, Alexander Demblon, Haiming Wen, Enrique Lavernia

Materials Science and Engineering Faculty Research & Creative Works

Oxide dispersion-strengthened (ODS) alloys are a critical class of structural materials for extreme environments, owing to their unique combination of high-temperature strength, thermal stability, and radiation tolerance, enabled by a very high density of nanoscale oxide dispersoids. These features make ODS alloys attractive for advanced nuclear systems, aerospace applications, and other harsh-service conditions where conventional alloys rapidly degrade. Despite decades of development, key challenges remain in understanding how nanoscale oxides interact with matrix microstructures, alloy chemistry, and irradiation-induced defects to control macroscopic performance. This review provides a focused, mechanism-based synthesis of the microstructural features that govern the properties of ODS …

Catalytic Hydropyrolysis Of Beetle Killed Trees For The Production Of Transportation Biofuels, Oluwanisola Makinde, Fernando L.P. Resende, Michael Asama, Demian F. Gomez

Jasper Department of Chemical Engineering Faculty Publications and Presentations

We conducted catalytic hydropyrolysis of beetle-killed trees: Pine, Ash tree, and Redbay in a micro-pyrolyzer (Py/GC–MS) and investigated the performance of heterogeneous catalysts like HZSM-5, NiMo-HZSM- 5, and NiRe-HZSM- 5. We also investigated the effects of temperature, catalyst-to- biomass ratio, and hydrogen pressure on product yield. Our findings reveal that aromatic yields increase with temperature and catalyst-to- biomass ratio but decline at higher hydrogen pressures; additionally, higher catalyst acidity enhances both total hydrocarbon production and selectivity toward C7–C8 aromatics, with each feedstock exhibiting distinct optimal conditions. The type of metal doped on the HZSM-5 zeolite plays an important role in …

Elevated Temperature Flexure Behavior Of Continuous Carbon Fiber Reinforced Zrb2–Zrsi2 Ultrahigh Temperature Ceramic Matrix Composites, Jacob Stacy, Aaron Ginsparg, Jason Lonergan, Jeremy Watts, Gregory Hilmas

Materials Science and Engineering Faculty Research & Creative Works

Ultrahigh temperature ceramic matrix composites (UHTCMCs) were fabricated from unidirectional prepreg tapes consisting of a matrix of ZrB₂ with 5, 10, and 15 vol.% ZrSi₂ additions and continuous polyacrylonitrile carbon fibers and were densified at 1600°C in a hot press. The relative matrix densities ranged from 88% to 93% with interlayer spacings of ∼72 µm and fiber volume fractions between 30% and 36%. Phenolic resin additions were utilized to react with ZrSi₂ acting as a transient sintering aid to form ZrC and SiC phases. Elastic moduli of the UHTCMCs decreased with increasing temperature during 4-pt flexure testing. …

Simulated Lunar Gravity Testing Of A Magnetic And Electrostatic System For Beneficiating Lunar Regolith, Blake A. Coffman, Gabriel Porter, Lindsay Manteufel, Mitchell Cottrell, Jeffrey D. Smith, David J. Bayless, William Shonberg, Frank D. Han, Fateme Rezaei, Kirby Runyon

Materials Science and Engineering Faculty Research & Creative Works

We present the design and testing of a lunar regolith beneficiation device that utilizes magnetic and electrostatic separation methods to concentrate desired minerals by removing unwanted material, such as the mineral anorthite, from bulk lunar regolith. The beneficiated materials would have value for downstream in-situ resource utilization (ISRU) processes such as metal extraction, oxygen extraction, and metal oxide additive manufacturing processes. The apparatus uses a dual-strength magnet system with N52 and N42 neodymium magnets to separate particles by magnetic susceptibility. The electrostatic separation system, which acts like a sieve, sorts the regolith simulant by particle size using a single-phase 50% …

The Effects Of Mold Flux Contamination On Oxide Scale Formation And Hydro-Descaling Efficiency During Steel Processing, Tochukwu Princewill Ojiako, Richard Osei, Mario Buchely, Haiming Wen, Simon Lekakh, Ronald O'Malley

Materials Science and Engineering Faculty Research & Creative Works

Oxide scale formation during thin-slab continuous casting has a complex structure, which is influenced by mold flux contamination, that modifies interfacial reactions during solidification, subsequent reheating, and descaling. While individual aspects of the oxidation behavior of carbon steel have been previously examined, the synergetic effects of mold flux contamination during continuous casting and subsequent reheating on scale modification and the efficiency of hydraulic descaling remain inadequately studied. This study quantitatively examines the effect of flux composition on oxide scale evolution, adhesion, and hydraulic removal in low-carbon steel under simulated industrial conditions. Slab samples with as-cast, cleaned, and flux-coated surfaces were …

Stem-Fit And Soil-Fit: Integrated Plant And Soil Nitrogen-Hormone Sensing With Machine Learning-Based Forecasting For Next-Generation Precision Agriculture, Nafize I. Hossain, Mohammad Solaiman, A.K.M. Ahsanul Habib, Md Al Mahmud Hossain Al Hadi, Shawana Tabassum

Electrical Engineering Faculty Publications and Presentations

Inefficient fertilizer application in agriculture leads to reduced crop productivity, nutrient losses, and reduced crop resilience, highlighting the urgent need for real-time monitoring of plant–soil nutrient and stress dynamics. This research aims to develop and validate a multiplexed sensing platform for real-time, in-situ measurement of key soil nutrients (Soil-FIT) and plant phytohormones (Stem-FIT) involved in nitrogen signaling and stress regulation. The proposed sensor suite integrates 3D-printed modules for continuous monitoring of nitrate, ammonium, and pH in both soil and plant sap, along with salicylic acid (SA), indole-3-acetic acid (IAA), methyl jasmonate (MeJA), and ethylene (ET) in plant sap. The sensors, …

Upconversion Photoluminescence In Wsse Alloy Monolayer Under Uniaxial Tensile Strain, Shrawan Roy, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The optical responses of monolayer transition metal dichalcogenides (1L-TMDs) can be tuned effectively by using mechanical strain. In this work, the tuning of upconversion photoluminescence (UPL) emission in 1L-WSSe alloy by applying uniaxial tensile strain is investigated. When the uniaxial tensile strain is changed from 0 % to 1.02 %, the peak position of UPL emission has a redshift of around 25.6 nm, and the UPL intensity goes up with an exponential function of the applied strain as the upconversion energy difference is varied from −197 meV to −131 meV. The sublinear power dependence for UPL emission in 1L-WSSe alloy …

Online Lifelong Optimal Adaptive Control Of Partially Uncertain Strict Feedback Discrete-Time Systems With Application To Quadrotor Uavs, Maxwell Geiger, Sarangapani Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This article considers the infinite time horizon optimal adaptive tracking control of partially uncertain strict feedback discrete-time (DT) systems with application to quadrotor uncrewed aerial vehicles (UAVs). First, the strict feedback DT system is transformed into an equivalent affine nonlinear DT system in terms of the tracking error dynamics. The optimal adaptive tracking control problem is solved using an augmented system approach, where a horizon of future bounded reference trajectory points is used in the augmented state, when compared to using a single point. It is assumed that the internal dynamics of the strict feedback system are unknown, but the …

Effect Of Process Parameters On Thermal Response Of An Oxy-Fuel Burner/Injector Panel In An Electric Arc Furnace Via Fiber Optic Sensors, Mobashir Ahmed, Rony Kumer Saha, Koustav Dey, Todd Sander, Jie Huang, Ronald J. O'Malley

Electrical and Computer Engineering Faculty Research & Creative Works

Modern oxy-fuel burner/injectors in electric arc furnaces (EAFs) play a critical role in scrap melting, liquid steel refining, and slag foaming. However, varying operational modes, combined with dynamic process conditions, such as arcing and slag behavior, can expose the injector panel surface to intense thermal conditions that can compromise efficiency and safety. Conventional monitoring techniques, including cooling water temperature measurements and thermocouples, fail to capture localized thermal anomalies due to their limited spatial resolution and susceptibility to electromagnetic interference. In this study, four high-resolution Rayleigh backscattering-based fiber optic sensors, interrogated via optical frequency domain reflectometry, were embedded in top and …

Corrections To: Enhancing Measurement Accuracy: The Impact Of Missing Data On Parameter Estimation In Mass-Spring-Damper Systems (Ieee Transactions On Instrumentation And Measurement (2026) 75 (1–12) Doi: 10.1109/Tim.2026.3676091), Michkath Omanda Bouraima, Steven Thompson, Maciej J. Zawodniok

Electrical and Computer Engineering Faculty Research & Creative Works

In the above article [1], a wording ambiguity appears in Proposition 4 regarding the description of the missing at random (MAR) mechanism. The published sentence states that the probability of observing the kth sample depends on the realized measurement value. This wording may be interpreted as dependence on the current unobserved value y[tk], which could suggest a missing not at random (MNAR) mechanism. The intended MAR mechanism is that the observation probability for the kth sample depends only on previously observed measurement information, such as y[tk-1], and not on the current unobserved value y[tk]. Therefore, the corrected wording clarifies that …

Using A Record Player Inspired Probe System To Investigate Adhesion And Friction Of Tire Rubber At Micrometer Length Scales, Kyle J. Galigher, Brendan Schmitt

Williams Honors College, Honors Research Projects

We will be using the principles behind how a record player turns physical grooves into electrical signals to develop a device that can be used to measure the surface of tires. The device will be capable of measuring the surface roughness of rubber samples from both new and worn tires, in order to compare the differences between them. It will be operable at varying speeds, and will produce electrical signals that correspond to the bumps along the surface of the rubber. The design will be carried out and optimized with the use of SolidWorks modeling, finite element analysis, motion analysis, …

Hvac Design And Calculations, Sarah Walters, Sarah Beyea

Williams Honors College, Honors Research Projects

This project studies Heating, Ventilation, and Air Conditioning (HVAC) systems for a car dealership located in Seguin, Texas. The building construction and architectural drawings were provided by EPIC Engineering Group. Comprehensive load calculations were done on the building in order to calculate necessary airflows throughout the building. Three possible HVAC design solutions were compared: Rooftop Units (RTUs), rooftop units paired with Variable Air Volume (VAV) Terminals with electric reheat, and Variable Refrigerant Flow (VRF) paired with a Dedicated Outdoor Air Unit (DOAS). Energy modeling was completed to compare the utility costs and energy consumption of each system. A comprehensive weighted …

Made On Mars: Design And Manufacturing Of Structural Polymer-Regolith Composites, Pailey M. Vitale

Williams Honors College, Honors Research Projects

Human exploration of Mars is constrained by harsh environmental conditions and the prohibitive cost of transporting materials from Earth. Long-term sustainability requires the local production of mechanical and structural components using resources available on Mars, thereby minimizing payload mass. This project investigates polymer–regolith composites derived from atmospheric CO₂ and mineral-rich regolith as a pathway toward in-situ manufacturing. These composites, when compatible with additive manufacturing, could replace imported plastics, enable on-demand fabrication, and support closed-loop recycling systems. The objective is to design and evaluate polymer–regolith composites that maintain mechanical integrity and environmental resistance under Martian conditions, including extreme temperature swings, radiation …

Active Altitude Control For High Powered Rockets, Henry Allen, Jason Secora, Charles Williams, Donavon Sanchez, Caleb Nedoma

Williams Honors College, Honors Research Projects

The International Rocket Engineering Competition (IREC) is the premier collegiate high power rocketry competition in the world hosted by the Experimental Sounding Rocket Association (ESRA). The Akronauts Rocket Design team has been competing in IREC since 2015 and have won several awards. The main goal of IREC is to launch a rocket to a specified altitude of 10k, 30k, or 45k ft while carrying a payload and successfully recover with little to no damage.

The control of a typical high-powered rocket is purely passive; the center of pressure of the rocket must be behind the center of gravity with respect …

Energy Efficient Windows Using Pvme, James S. Bronstrup

Williams Honors College, Honors Research Projects

This Honors Project aims to improve window energy efficiency using the thermoplastic polymer PVME (polyvinyl methyl ether), which displays temperature-dependent transparency that can be adjusted by mixing it with water and salt to reduce heat transfer through a window. The objective is to determine the optimal PVME water-salt ratios for placement inside a windowpane, evaluate energy savings compared to a traditional argon-filled window, and compare estimated costs. A small-scale model will test different concentrations for various climates, with heat transfer measured by temperature indicators via a LabQuest. Building on research by Yang Zhou at Nanyang Technological University, who used a …

Microscopic Insights On Shear Rheology Of Polyampholyte Ionomers Via Molecular Simulations, Kyle Vonscio

Williams Honors College, Honors Research Projects

Ionomers are polymers that contain a small fraction of charged groups. The ionic attraction of charged groups allows ionomers to act similarly to crosslinked polymers. Depending on the strength of electrostatic interactions and structure of the ionomers, different dynamics and rheological responses can be observed. With moderate attraction between ions, these noncovalent crosslinks can be broken when heated, allowing ionomers to flow and show the strength of a crosslinked network at low temperatures. Nonequilibrium molecular dynamics (NEMD) simulations will be performed under shear in the xy-plane and the macroscopic rheology and conformation of the polyampholyte ionomer will be determined. The …

A 1d Symmetric Interior Penalty Discontinuous Galerkin Solver In Rust, William Aey

Williams Honors College, Honors Research Projects

This honors project will build a 1D Symmetric Interior Discontinuous Galerkin (SIPDG) solver in Rust for Stum-Liouville type problems such as the Poisson equation, with Robin, Dirichlet, and Neumann boundary conditions. The work will cover the full pipeline: starting from the strong form of the PDE, deriving the DG weak form, implementing element and interface operators, and assembling or apply the discrete operator. Rust's safety and concurrency (e.g, via Rayon) will be used to explore serial and parallel performance. A test-driven development approach will be used to maintain a strong suite of tests. The project will result in a documented …

Determining Critical Micelle Concentrations Of Standard Surfactants And Rhamnolipids, Kathryn E. Kunz

Williams Honors College, Honors Research Projects

My proposed project will study the critical micelle concentration (CMC) of rhamnolipids using the pendant-drop and drop-weight methods. First, the critical micelle concentrations of ionic and nonionic common surfactants will be tested. Sodium Dodecyl Sulfate (SDS) will be used as an ionic surfactant and Tween 20 will be used as a nonionic surfactant. The critical micelle concentrations will be determined using the pendant-drop and drop-weight methods. The experimental results from the standard surfactants compared to their accepted values will be tested to assist with determining a more suitable approach. Completing the tests will provide a better understanding of critical micelle …

Ai-Based Porosity Detection In Babbitt Bore Turning, Kaylee Leggett, Hannah Adams Gemmell, Kaisa Shingleton

Williams Honors College, Honors Research Projects

For this project, an external company reached out to the University of Akron requesting assistance with defect detection during their vertical turning operations. As babbitt is removed in a vertical turning process, it occasionally reveals defects, mainly porosity, which can lead to costly downstream failures of the part. Current inspection techniques involve use of dye penetrant, which is time consuming, labor intensive, unergonomic, and a source of human error. The goal of the project is to create an alternative inspection method using an AI-based machine-learning model. After the turning operation, a camera is deployed to perform an in-place inspection, taking …

Design New Stage For Vacuum Pin On Disk, Miranda Boyd

Williams Honors College, Honors Research Projects

For my senior design project, I am redesigning the moving stage for the vacuum pin-on-disk test used in the Akron Engineering Tribology Lab. This system is used to evaluate bearings and lubricants for aerospace applications under controlled vacuum conditions. The current stage design limits flexibility when adjusting for different testing parameters, so my goal is to develop a new movable stage that allows for varying weights and loads to be applied accurately and safely. The redesigned stage will improve test efficiency, adaptability, and precision, ensuring the system can accommodate a wider range of experimental conditions and materials while maintaining compatibility …

Printer For Music Box, Chad Lewis, Caleb Murawski, Zion Smith, Bryan Tibbs

Williams Honors College, Honors Research Projects

The traditional method of creating music box sheet music involves manually punching holes into a paper strip using a hand-operated hole punch. This process involves precise knowledge of each note’s location and the ability to achieve perfect accuracy for hours.

The goal of this system is to automate this process, significantly reducing the time required while greatly improving the accuracy of the resulting music box playback. The user simply uploads a MIDI file of their choice into a user-friendly application. Here, the file is modified based on the user’s needs and sent to an automated hole-punching system to punch the …

Crashheart, Ellie Riekert, Kennady Skidmore, Madison Furino

Williams Honors College, Honors Research Projects

This project aims to develop an XR (extended reality) iPad training system to improve pediatric crash cart preparedness among nurses and clinical staff at Akron Children’s Hospital. In emergencies such as respiratory failure or shock, quick and accurate access to crash cart supplies is vital, yet opportunities for hands-on practice are limited. Current nurse training relies on PowerPoint instruction or costly physical simulations, reducing engagement and skill retention. Our interactive XR solution replicates the crash cart’s layout and contents, allowing users to practice identifying and retrieving critical items in a realistic environment without using physical supplies. The system will be …

Seat Belt Data Collection Methods: A Comparison Between States And National Guidelines, Madison R A Richards

Williams Honors College, Honors Research Projects

Thousands of fatalities related to vehicle crashes occur every year. One method to reduce fatalities is to encourage seat belt use compliance. To promote statistics regarding seat belt use, there first must be reliable data on seat belt compliance and this comes from good survey design.

This report is a comparative analysis of seat belt data collection methodologies for Ohio, Michigan, and Indiana, in addition to an evaluation of how each state aligns with standards set by the National Highway Traffic Safety Administration (NHTSA). The framework for this analysis focuses on NHTSA’s five core survey design requirements: selection of observation …

Security Onion Ids Case Study: Detecting And Investigating Threat Traffic Using Suricata, Zeek, And Pcap Evidence, Daryna Myroniuk

Williams Honors College, Honors Research Projects

A key component of cybersecurity is network intrusion detection, which is used to examine network traffic for any malicious activity. Many organizations deploy intrusion detection systems (IDS) but still face challenges such as validating detections, investigating alerts in a timely manner, and producing clear and repeatable evidence of what has occurred, especially when live traffic capture may be limited to risks, permissions, or privacy concerns. The goal of this project was to use Security Onion, which includes Suricata and Zeek to create and demonstrate a controllable and manageable evidence-based IDS investigation workflow. This project is focused on deploying and validating …

Analyzing Network Traffic And Data Exfiltration Via Smb In Post-Vm Escape Scenarios, Noah M. Disanza

Williams Honors College, Honors Research Projects

Virtual machines (VMs) play a crucial role in modern IT infrastructure environments by providing isolation and enhanced security, among other things, for both personal and corporate systems. VMs are heavily rely upon to safely test malware, manage infrastructure, and reduce risk to host systems. This reliance is so substantial that the idea of reducing risk to the host system is believed to be erasing risk entirely. However, this mindset has shown to be challenged time and time again by the emergence of exploits known as virtual machine escapes. These exploits allow malicious actors to break out of the virtualized environment …

Lumacurve Control System Update, Jacob Kustra, Caleb Wengerd

Williams Honors College, Honors Research Projects

The existing track heater control system used by Lumacurve has become outdated and requires frequent maintenance due to inconsistent operation and component failures. This project aims to modernize the system through the implementation of a programmable logic controller (PLC), infrared non-contact temperature sensing, and an automated pneumatic ejection mechanism.

The redesigned system improves temperature monitoring accuracy and reduces operator intervention by automatically ejecting heated plastic tracks from the heater once the desired temperature is reached. An emergency ejection subsystem is also incorporated to safely clear tracks from the heater in the event of improper operation or system faults. Additional emphasis …

Rapid Skin Stapler, Emma J. Patterson, Allison M. Milligan, Morgan E. Dunlap

Williams Honors College, Honors Research Projects

Severe burn injuries frequently require split-thickness skin grafts, with metal surgical staples serving as the current standard for fixation. While staples provide rapid and secure placement of graft material, they also introduce significant challenges. Removal is painful, time-consuming, and often requires sedation in pediatric patients, leading to added risk, resource strain, and poor patient experience. These drawbacks highlight the need for improved fixation methods that maintain graft stability while reducing procedural burden. This project applies the engineering design process to address these challenges through identification of user needs, translation into design inputs, risk assessment, and development of a prototype aimed …

Lunar Regolith Densometer, Liam Lee, Vincent Innocenzi

Williams Honors College, Honors Research Projects

Testing of extraterrestrial rovers is a growing concern as lunar exploration as an industry is becoming increasingly commercialized. Currently, the way rover testing is conducted is on a soil regolith which is already available. The structure of the soil, however, is harmful to humans and requires a full bunny suit and respirator to be worn during the conduction of the experiment. This limitation, along with the expensive price tag, prevents college university students and companies from establishing a rover test area in labs. The goal of the overall project is to create a safer testing environment by mimicking the soil-to-tire …

Analyzing The Effect Of Network Properties On Self-Assembly Of Polymer Grafted Nanoparticles In Vitrimer Nanocomposites, Tyler Eakin

Williams Honors College, Honors Research Projects

This project aims to show the how polymer grafted nanoparticles behave in a vitrimer composite network. The effect of varying the network parameters such as the grafting density, the volume fraction of nanoparticles, and the ratio of polymer chain length : graft chain length will be studied. The assemblies formed by the polymer grafted nanoparticles will be visually analyzed and assigned one of 5 possible conformations. A phase diagram of grafting density vs network chain length / graft length will be constructed. The phase diagram will provide valuable insight into how nanoparticle self-assembly can be manipulated through changing network parameters

Ai-Based Music Mood Analysis With Historical And Real-Time Data, Biswash Bhattarai

Williams Honors College, Honors Research Projects

The Music Mood Analyzer Dashboard identifies and visualizes the emotional tone of songs using audio features like tempo, energy, and valence. It classifies tracks into moods such as happy, sad, or calm and presents insights through an interactive dashboard. The project combines music analysis and data visualization to help users understand how sound relates to emotion.