Engineering Commons^™

Characterization Of The Thermally Driven Red Hue Effect In Coated And Uncoated Concrete Systems: Implications For Post-Fire Assessment In Wildland Urban Interface Communities, Juan C. Palominos Jr

Master's Theses

The increasing frequency and intensity of Wildland-Urban Interface (WUI) wildfires, such as the destructive 2025 Pacific Palisades Fire that destroyed over 6,000 structures, have underscored the urgent need for rapid post-fire safety assessment methodologies. This study sought to quantitatively characterize the Thermally Driven Red Hue Effect (TRHE), a unique, irreversible color shift observed in architectural coatings and concrete substrates, to determine its reliability as a permanent visual record of thermal exposure. Concrete substrates were formulated with three distinct coarse aggregates: gold granite (14.7% Fe), red cinder (22.4% Fe), and green rock (33.6% Fe) and coated with a 20 PVC waterborne …

Space Quacker Advanced Development (Squad): Lora Modulation On A Leo Cubesat Mission For Evaluation Of 916 Mhz Uplink, Samantha Brunton

Master's Theses

The LoRa Modulation format was developed by SEMTECH in 2018 and has revolutionized terrestrial Internet of Things (IoT) networks. LoRa (Long Range) has been successfully demonstrated as a long-range, low-data-rate communication modulation format and packet protocol for low-power terrestrial applications. LoRa offers low power consumption, low cost, robust signal sensitivity, and long communication range. Recently, interest has grown in using LoRa communication in Low Earth Orbit (LEO) satellite systems, especially for global IoT connectivity. Previous studies have investigated the theoretical feasibility and simulated the performance of LoRa satellite communication. Companies such as Lacuna Space have demonstrated the practical potential of …

Development And Verification Of An Updated Thermal Model For Cal Poly's Small Thermal Vacuum Chamber, Bryce G. Leonard

Master's Theses

This thesis discusses modifications made to the Small Thermal Vacuum (TVAC) Chamber in the Space Environments Laboratory at California Polytechnic State University, San Luis Obispo, and the development and verification of an updated thermal model reflecting these changes. The chamber was redesigned to improve thermal performance, featuring a homogeneous aluminum platen coated with Aeroglaze Z306 to enhance radiative heat transfer, along with expanded data acquisition capabilities for temperature and pressure measurements.

A new thermal model of the chamber was developed in SolidWorks using a finite element approach. The model incorporates conductive and radiative heat transfer mechanisms and is configured to …

Design And Development Of A Resonance Ignition System Using Gaseous Propellants, Benjamin J. Hoefer

Master's Theses

This work presents the development and experimental evaluation of a resonance igniter (RI) operating with premixed gaseous propellants. Resonance ignition is a non-electrical ignition concept in which an underexpanded jet impinges on a closed-end Hartmann–Sprenger tube (HST), generating cyclic compression and expansion waves that rapidly heat gas near the tube endwall. A modular experimental system was designed and built to investigate resonance ignition using methane–air and methane–oxygen mixtures. The system includes a supplemental configuration that may probe for mixture conditions favorable to ignition, informing RI testing. Pressure and temperature measurements were used to characterize pressure control, mixture pressure ratio (MPR), …

Analysis And Design Of A 2-Bit Millimeter-Wave Reconfigurable Intelligent Surface And Investigation Of Fss-Assisted Angular Stability, Max Spalek

Master's Theses

Millimeter-Wave (mm-wave) technology utilizes high frequency spectrum and can deliver multi-gigabit speeds, ultra-low latency, and massive bandwidth capacity. However, this technology is rather new and many technical challenges remain. On the other hand, Reconfigurable Intelligent Surfaces (RIS) have emerged as promising structures for controllable electromagnetic wavefront manipulation in wireless communication systems. This thesis presents the design of a 2-bit RIS unit-cell element operating throughout the 30–34 GHz mm-wave band, where the structure was progressively refined from an initial resonating geometry toward a grounded reflective RIS configuration. The proposed structure utilizes PIN-diode switching states to produce four discrete reflected phase states …

Development Of A Video-Based Tool To Measure Motor Asymmetry In Infants At Risk For Hemiparesis, Roha Ali

Master's Theses

Congenital hemiparesis is a unilateral motor impairment stemming from brain injury in utero or early postnatally. Hemiparesis can be difficult to detect in early infancy with current clinical tools. Yet, early identification of motor asymmetry could play a key role in the design of effective early intervention and rehabilitation strategies. This thesis presents the development and validation of a video-based tool designed to extract infant limb movement data using DeepLabCut’s (DLC) machine learning network. The pipeline was developed using videos of typically developing (TD) infants and infants with Asymmetric Perinatal Brain Injury (APBI), all at or under 3 months corrected …

A Security Framework For Pacemaker Lead Failure: Anomaly Detection System And Failsafe Policy Considerations, Ethan Wagner

Master's Theses

Embedded system security in implantable medical devices (IMDs) remains an underexplored challenge due to the unique constraints of these systems. Specifically, pacemakers are optimized for ultra-low power consumption to maximize device lifespan, are highly resource constrained, and demand reliable and correct operation to prevent severe health consequences. These systems rely on sensing electrodes, called leads, to detect cardiac activity and stimulate the patient’s heart when appropriate. Therefore, pacemaker lead integrity is a critical issue, as malfunction or compromise can result in device failure jeopardizing patient safety.

The security framework presented in this thesis integrates several works to proactively detect and …

Large Scale Kmer-Based Proteomic Analysis: An Application Towards Evolutionary Constraint Discovery, Matthew Chak

Master's Theses

Large protein databases now make it possible to study short peptides across natural protein sequence space at unprecedented scale, but exhaustively counting k-mers across billions of protein sequences remains computationally difficult. This thesis develops an exact amino-acid k-mer counting method based on direct addressing, in which fixed-length amino-acid strings are encoded as base-20 integers and updated with a sliding-window recurrence. By avoiding key storage and collision resolution, this approach removes overhead inherent to hash-map-based methods when the k-mer space is sufficiently dense. A memory analysis shows when direct addressing is preferable to open-addressing hash tables, and expected-saturation calculations motivate its …

Effect Of The Stacking Sequence And Number Of Ply Orientation In A Quasi-Isotropic Laminated Plate On In-Plane Shear Modulus And Failure Modes, Ann Larson

Master's Theses

Maximizing the shear modulus and strength, as well as predicting failure mode and location, when designing a stacking sequence of quasi-isotropic carbon fiber laminated plates is essential to predict stability, resistance to deformation, and overall stiffness of the structure. This research investigates the effect of the stacking sequence of quasi-isotropic laminated composite plate materials in accordance with ASTM D5379: Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method.

In this research, experimental testing and Finite Element Analysis (FEA) were first used on aluminum to validate the simulation process before applying it to composite materials. The …

Characteristic Stress And Strain Optimization Of Cardiovascular Catheters With Laser-Cut Hypotubes Using Finite Element Analysis, Kyle E. Hirth

Master's Theses

Cardiovascular catheter systems rely on laser-cut hypotubes to balance flexibility and structural integrity required for minimally invasive surgical procedures.  Optimizing these mechanical characteristics remains a significant challenge.  This study aims to investigate the influence of key laser-cut geometric parameters on the mechanical performance of hypotubes through finite element analysis.

Commercially representative laser-cut hypotubes were modeled and a finite element model was developed.   Geometric design parameters were varied across a design space consisting of pitch values ranging from 0.006 in. to 0.018 in. and cuts per revolution (CPR) ranging from 2.5 – 4.5.  For each pitch and CPR combination, loading stiffness …

Analysis And Design Of Auger Cast Piles With Isolation Casing, Zachary Lindsay

Master's Theses

This research addresses the analysis and design of double cased piles. Bay Area Rapid Transit (BART) runs a large rail system both above and below ground that connects the entire Bay Area. BART requires that all new constructions avoid transmitting axial load to their tunnels from adjacent piles. If piles fall within the zone of influence, builders must install double cased piles. Double casing is where there is an extra casing around the pile, with an air gap between them. The air gap prevents load from transferring to the outer casing. The length of this casing is called the isolation …

Aerodynamic Design And Structural Evaluation Of A Global Minimum Torque Inspired Multirotor Propeller, Zeke Bukovansky

Master's Theses

This thesis develops a repeatable design, CAD, aerodynamic postprocessing, structural screening, and manufacturing feasibility workflow for a 22-inch global minimum torque inspired multirotor propeller. Matched MIL and GMT geometries were compared at a 35 N, 4000 rpm static-hover operating condition using BEMT/XFOIL aerodynamic postprocessing, with diameter, blade count, chord distribution, airfoil schedule, and target thrust held constant. The final modeled comparison predicted a modest 1.5% reduction in torque and shaft power for the GMT case while maintaining the same thrust target. CAD construction, MATLAB reduced-order beam model, Abaqus screening, and manufacturing planning were used to identify geometry level structural and …

A2s Uplink Latency Minimization For Wildfire Monitoring Systems Using Mbse And Stochastic Modeling, Luis Giovanni Wang

Master's Theses

Wildfire response depends on how quickly a detection reaches the people who act on it, and the slowest remaining step is often the link that carries an alert from a remote sensing platform to a satellite. This thesis models the latency of that link, the Air-to-Space uplink, for a wildfire-monitoring UAV that carries a Starlink terminal and sends an ALERT packet to a serving Low Earth Orbit satellite. The uplink is difficult to predict because both the UAV and the satellite move, and because the wildfire environment degrades the channel at the moment the data matters most.

The thesis uses …

Synthesis And Characterization Of A Graphene Oxide-Zif-8 Composite For Enhanced Post-Combustion Carbon Capture, Sydney Cooper

Master's Theses

Carbon dioxide (CO₂) emissions from fossil fuel combustion are a major contributor to climate change and its associated environmental impacts. The current standard technology for post-combustion carbon capture, aqueous amine scrubbing, is effective but requires significant regeneration energy and has high operational costs. As a result, solid sorbents have been investigated as lower-energy alternatives. Metal-organic frameworks (MOFs) are a promising class of porous nanomaterials due to their high surface area, tunable pore structures, and adjustable surface chemistry. Among them, zeolitic imidazolate framework-8 (ZIF-8) has high thermal and chemical stability, hydrophobicity, and favorable adsorption properties. However, conventional synthesis methods often rely …

Evaluating The Cost-Benefit Tradeoffs Of Simt Control Mechanisms In Resource-Constrained Gpus, Nikolas Tambornini

Master's Theses

This thesis conducts a hardware-level analysis of the cost–benefit tradeoffs associated with increasingly complex SIMT control mechanisms in a resource-constrained GPU core. Four design implementations are evaluated: a Base Tiny GPU without warp scheduling capability; a Warp Scheduler using round-robin warp selection; a Branch Divergence implementation incorporating a dedicated divergence stack and post-dominator reconvergence mechanism; and a Dynamic Warp Allocation implementation that replaces the static warp structure with a runtime warp manager, regrouping threads by current program counter to recover SIMD lane utilization during active divergence. Each design is evaluated using two complementary measurements: functional simulation implemented using the CocoTB …

Neuron Notes, Araceli Franco, Ethan Diec, Max Blennemann, Shibo Cong

Computer Science and Engineering Senior Theses

Mainstream digital note-taking tools such as Notion, Microsoft OneNote, and Evernote organize knowledge around linear documents and rigid folder hierarchies, a structure that strays from the associative, graph-like nature of human semantic memory. Mind-mapping and linked-note systems such as XMind, Obsidian, Roam Research, and Logseq move closer to that associative model but still constrain users to short labels, automatic layouts, or page-centric workflows that underutilize spatial and visual recall. This thesis presents Neuron Notes, a spatial, graph-based note-taking system designed to align digital organization with how people actually form and retrieve ideas. The system is implemented as a three-tier web …

Enhanced Triboelectric Effect Using Functionalized Multiwalled Carbon Nanotube-Coated Fiber Mats For Biomechanical Energy Harvesting, Fernando Viesca, Diego De Leon, Kevin Alejandro, Rigobert Ybarra Jr., Md. Wasikur Rahman, Victoria Padilla, Horacio Vasquez, Karen Lozano, M. Jasim Uddin

Mechanical Engineering Faculty Publications

Triboelectric nanogenerators (TENGs) have emerged as a cutting-edge technology for developing self-powered wearable electronic devices. In this study, TENGs were fabricated using two fiber mats: forcespun polytetrafluoroethylene (FS-PTFE) microfibers and electrospun polyvinyl alcohol (ES-PVA) nanofiber (NF) mats. The FS-PTFE mats were coated with functionalized multiwalled carbon nanotubes (MWCNTs). Functionalized MWCNTs were dispersed in water-based solutions containing three different surfactants—sodium dodecyl sulfate, sodium dodecylbenzene sulfonate, and Triton X-100 to enhance fiber interaction. The NF mats were subsequently immersed in aqueous systems. The surfactant facilitated the uniform deposition of COOH-MWCNTs onto the FS-PTFE fibers, serving as a negative layer, while ES-PVA mat …

Thermally Induced Color Changes In Iron Oxide Pigments Used In Architectural Coatings, Han Diep

Master's Theses

The 2025 Palisades Fire was one of the most destructive wildfires in the history of Los Angeles, destroying thousands of structures and severely impacting the communities after. This widespread destruction demonstrated an urgent need for more effective wildfire prevention strategies. Architectural coatings do not only provide aesthetics and protection against environmental conditions but can also function as a thermal indicator when a fire breaks out. This study examines the thermally induced color transformation of iron oxide pigments, commonly used in earthtone paint, to provide information relevant to CAL FIRE for improved analysis of wildland-urban interface (WUI) fire behavior and mitigation …

Creating A Framework For Quantifying Wildland Urban Interface (Wui) Fire Vulnerability Factors, Ryan L. Delalio

Construction Management

Wildfires have been the focus of geospatial research for decades. Climate change and increased suburban development in California are leading to an increase of Wildland Urban Interface (WUI). These zones are at higher wildfire risk, and a metric is needed to determine the most vulnerable communities to help them assess their personal wildfire risk. By analyzing current WUI wildfire vulnerability literature, the main contributing factors behind the impact of wildfires in California emerge. These factors are then paired with datasets that contain geospatial information about the factors to help us find the locations of highest vulnerability. This paper serves as …

Skip The Grid 2026: Off-Grid Power For Hopi And Navajo Families, Xanthus Aurelius Poole Silverstein

Construction Management

Skip the Grid is an interdisciplinary service-learning project that provides sustainable energy solutions to families with school-aged children living in the Navajo and Hopi Nations. In March 2026, a team of 23 students from five academic disciplines at California Polytechnic State University (Cal Poly) partnered with Heart of America, SOLV Energy, and NextPower to complete the fifth year of the program. The project's purpose was to improve quality of life and support educational success by providing reliable access to electricity, lighting, and refrigeration in underserved communities. Participants were organized into five installation teams consisting of Cal Poly students, faculty, industry …

Skip The Grid: Providing Solar Energy To Navajo And Hopi Families, Derrick Huang

Construction Management

In Spring 2026, the Skip the Grid program sent its 5^th consecutive service project team to the Navajo Nation. Consisting of 4 faculty and 23 interdisciplinary students from various majors such as Construction Management, Mechanical Engineering, Environmental Management, and more, the California Polytechnic State University, San Luis Obispo (Cal Poly) team partnered with non-profit Heart of America, SOLV Energy, and NextPower to install Two 200-watt PV panels, a Yeti 1500X battery, a refrigerator, and two LED lights to families in the Navajo and Hopi Nations in Northeastern Arizona. Within 3 installation days, the Skip the Grid team was able …

Restoreband: An Electromyography Band For Tracking Forearm Muscle Action And Activation In Post-Stroke Adults, Mairin T. Mullen, Melody Nwagwu, Kosuke Nishimura, Benjamin Miramon

Biomedical Engineering

This study involves the design of a non-invasive surface electromyography (EMG) band to estimate hand posture for individuals recovering from stroke and other neuromuscular disorders. The device is meant to measure forearm muscle activation to provide objective recovery data that can supplement traditional rehabilitation. Current EMG systems are often expensive, cumbersome, and difficult to use. The goal of this study is to develop an affordable, accurate, and easy to use solution that improves access to EMG motor monitoring.

The key stakeholders include stroke survivors, clinicians, and the project sponsor, Dr. Espinoza-Wade. This report includes project introduction, background, objectives, and project …

The Effects Of Adipose Tissue Trauma On Vascular Function After Collateral Arteriogenesis, Nathan Tran

Biomedical Engineering

Peripheral artery disease (PAD) affects an estimated 200 million people worldwide and is characterized by arterial narrowing that reduces perfusion to the limbs. Collateral arterioles can naturally restore blood flow through a remodeling process called arteriogenesis, making it a promising therapeutic target. However, the femoral artery ligation (FAL) model used to study arteriogenesis requires surgical access deep to the inguinal fat pad, and approaches for handling the fat pad vary widely across surgeons and protocols. Since adipose tissue harbors a large population of macrophages, the immune cells that govern arteriogenesis, fat pad manipulation may introduce confounding inflammatory stimuli that disrupt …

To Wait Or To Transfer? A Three-Level Optimization Framework For Intermodal Transfer Coordination In First Train Timetabling And Bus Bridging Services Management, Hao Li, Liujiang Kang, Norman Weik, Huijun Sun, Qingying Lai, Zhiguang Cao

Research Collection School Of Computing and Information Systems

This study addresses the integrated optimization of the first train timetabling and bus bridging service design (FTT-BBSD) for morning transfer challenges, two critical but interdependent passenger services in the public transit system. In contrast to most existing studies and conventional approaches, this study explicitly models the influence of passenger path choices and transfer mode selections on FTT-BBSD. Through a novel dual-level network representation that integrates subway and bus systems, we formulate the FTT-BBSD problem as a mixed-integer nonlinear programming model. The model simultaneously determines subway and bus timetables and bridging line deployment to minimize total travel time for all first …

Hydpn: A Hybrid Deep Reinforcement Learning, Programming, And Neighborhood Operations Framework For Integrated Scheduling On Parallel Batch Processing Machines, Yuqi Wang, He Luo, Guoqiang Wang, Zhaoxia Wang

Research Collection School Of Computing and Information Systems

Batch processing machines (BPMs) are widely used in industries such as semiconductors, metal processing, and healthcare, where jobs are processed in batches. As production, inventory, and distribution become increasingly integrated to improve efficiency, research on their joint scheduling in parallel BPM environments remains scarce. This paper addresses the integrated scheduling problem in parallel BPMs, involving production, inventory, and distribution stages, with the objective of minimizing total costs. A unified cost-based model is first formulated, applicable to both in-facility and external distribution scenarios. A hybrid algorithm framework, HyDPN, combining deep reinforcement learning, dynamic programming, and neighborhood operations is proposed. Extensive experiments …

Extensive And Intensive Margin Labor Supply On Ride-Sourcing Platforms, Hao Sun, Hai Wang, Zhixi Wan

Research Collection School Of Computing and Information Systems

The rapid expansion of ride-sourcing platforms has enabled freelance drivers to flexibly determine both their participation and working hours. Understanding this flexible labor supply behavior is essential for managing platform capacity and evaluating the impacts of pricing and incentive policies on driver welfare. This study develops a labor supply model in which drivers optimally choose whether to participate (extensive margin) and how long to work (intensive margin) to maximize their utility from consumption and leisure. The model incorporates heterogeneity in drivers’ other income, idle time, and participation costs, allowing us to analytically characterize equilibrium labor supply decisions. The results show …

Rc-Nf: Robot-Conditioned Normalizing Flow For Real-Time Anomaly Detection In Robotic Manipulation, Shijie Zhou, Bin Zhu, Jiarui Yang, Xiangyu Zhao, Jingjing Chen, Yu-Gang Jiang

Research Collection School Of Computing and Information Systems

Recent advances in Vision-Language-Action (VLA) models have enabled robots to execute increasingly complex tasks. However, VLA models trained through imitation learning struggle to operate reliably in dynamic environments and often fail under Out-of-Distribution (OOD) conditions. To address this issue, we propose Robot-Conditioned Normalizing Flow(RC-NF), a real-time monitoring model for robotic anomaly detection and intervention that ensures the robot's state and the object's motion trajectory align with the task. RC-NF decouples the processing of task-aware robot and object states within the normalizing flow. It requires only positive samples for unsupervised training and calculates accurate robotic anomaly scores during inference through the …

Long-Term Mine Planning: A Survey Of Classical, Hybrid And Artificial Intelligence-Based Methods, Nurul Asyikeen Azhar, Aldy Gunawan, Shih-Fen Cheng, Erwin Leonardi

Research Collection School Of Computing and Information Systems

The aim of long-term mine planning (LTMP) is two-fold: to maximize the net present value of profits (NPV) and determine how ores are sequentially processed over the lifetime. This scheduling task is computationally complex as it is rife with variables, constraints, periods, uncertainties, and unique operations. In this paper, we present trends in the literature in the recent decade. One trend is the shift from deterministic toward stochastic problems as they reflect real-world complexities. A complexity of growing concern is also in sustainable mine planning. Another trend is the shift from traditional operational research solutions — relying on exact or …

Del Miedo A La Ternura: Deconstrucción De Imaginarios Constitutivos De La Iag Para Imaginarla Como Una Tecnología Futura, Elizabeth Rodríguez Rendon

GDI. Revista de investigación de Género, Diseño e Innovación

El artículo propone una reflexión crítica a modo de ensayo sobre los imaginarios sociotécnicos que han configurado históricamente el desarrollo de la tecnología y, particularmente, de la Inteligencia Artificial Generativa (IAG). Se sostiene que la ciencia moderna occidental se estructuró a partir del miedo como afecto dominante, heredado de las tradiciones prometeica y fáustica, las cuales promovieron una relación con la técnica basada en el control, la dominación de la naturaleza y el rechazo de la finitud humana. Desde esta lógica, la tecnología ha sido imaginada como instrumento de poder, defensa y superioridad, reforzando narrativas de fascinación y temor frente …

Design And Optimization Of A Bluff Body For Energy Harvesting Of Transverse Galloping Induced By Low-Speed Wind Using Bernstein Polynomial Equations, Youssef Wael Abdelmoneim

Theses and Dissertations

In this thesis, a computational framework is proposed for optimizing the aerodynamic shape of bluff bodies used in galloping-based wind energy harvesters. The system targets low-wind speed environments, where normal wind turbines are not effective, offering a potential alternative to batteries used for powering small electronic devices such as wireless sensors. The design relies on the galloping effect, where airflow around a bluff body induces transverse oscillations that drive an energy conversion mechanism. To generate efficient bluff body geometry, the Class-Shape Transformation (CST) method is used to define a wide range of candidate shapes with minimal design parameters. These shapes …