Engineering Commons^™

Automotive Emission Control, Thomas P. Schultz

Graduate Research Papers

Emission control systems required by the federal government to reduce exhaust, crankcase, and fuel system emissions a.re resulting in engines that have a. totally new set of fundamental characteristics. This paper is intended to examine the various emission control systems and attempt to gain insight into their effect on engine performance, economy, service and trouble shooting techniques that will make servicing these engines more effective.

Jacksonville Urban Area Transportation Study: Annual Certification And Unified Work Program For The Jacksonville Urban Area, Jacksonville Area Planning Board

Arthur N. Sollee, Sr. Textual Materials

Document contains committee activities, surveillance findings, short range multi-modal implementation program, unified work program and suggested funding sources.

The Theoretical Distribution Of Forces In The Rigid Component Of The Buccal Arch Positioner, Dennis H. Teruya

Loma Linda University Electronic Theses, Dissertations & Projects

The distribution of an applied force to the rigid component of the Buccal Arch Positioner was determined with a theoretically formulated model. The rigid component was assumed to be a free body without the semi-rigid attachments and was evaluated at four points for the force distribution. The summation of the forces and the moments were equated to zero and were utilized to derive equations to solve for the unknown forces. The unknown forces at each point of the rigid component were solved for in terms of the given force applications.

A laterally directed force application at one of the posterior …

A Method Of Analyzing Mandibular Movement, Richard B. Mccoy

Loma Linda University Electronic Theses, Dissertations & Projects

Mandibular movement is considered to be a fundamental factor in the study, analysis, and treatment of occlusion. For many years, dentists have realized that dental health depends upon the compatibility of mandibular movements and occlusion. This realization has led to the development of new methods and techniques for recording accurately and scientifically the movements of the mandible. In order for this data to be of scientific value, it must be stored in a usable form which is easily available for analysis.

The purpose of this research project was to develop a procedure for storing and recalling mandibular-movement information. Before such …

An Intensity-Dependent Filter, James M. Thorne, Thomas R. Loree, George Mccall

Faculty Publications

It is useful in optically driven Kerr-cell shutters and other laser applications to have intense pulses with extremely low light levels between pulses. We describe here a device that accomplishes this objective external to the laser cavity.

Interfacial Energy And Wettability Of Some Glass-Metal Systems, Mahmoud Yehia Demeri

Archived Theses and Dissertations

No abstract provided.

The Spin--An Accident Analysis, Tim Brady

Publications

An analysis of an accident involving a C-130 Hercules is described. C-130s do spin and the outcome is normally fatal to aircrew members.

Diffusion Studies With Novel Plastics, Marion Toohey Conway

Theses

The rates of diffusion through two fluorinated groups and two non-fluorinated groups of laboratory prepared membranes were compared with each other and with commercially available cellulose membranes. The membranes.were evaluated, in particular, for possible use with the artificial kidney. Diffusion experiments were conducted with sodium chloride, urea and uric acid. Experimental results were compared to diffusion coefficients calculated in the literature for cellulose membranes. The results show that the rates of diffusion of all of the solutes tested for the laboratory prepared membranes are comparable to that of the cellulose membranes. The fluorinated group had a slightly higher diffusion coefficient …

Minimum Reflux In Fractionating Columns : A New And Improved Short-Cut Method, Elizabeth Garcia

Theses

A short-cut method is presented for calculating the minimum, reflux rate for multicomponent systems. This new method is best suited for use on the computer and gives a very accurate estimate of this important factor in the design of fractionating columns. It does so without going to the tedious and time-consuming calculations of the rigorous methods.

The calculation approach is based on a simplification of the Thiele and Geddes method for fractionating columns under minimum reflux conditions.

The program is written in Fortran IV language and was used on an IBM 370 computer. Input specifications include the split of the …

Kinetic Modeling Study Of Catalytic Hydrogenation Of Codimer, William Mounce

Theses

A kinetic modeling study was made on a gas phase catalytic reaction. The data used was that on the hydrogenation of codimer, collected by Tschernitz, et al, The objective was to determine if non-linear least squares regression offers an advantage over linear least squares regression in discriminating between Langmuir. Hinshelwood kinetic equations.

For the experimental data in question, it was found that neither linear nor non-linear regression could distinguish between the two plausible mechanisms. With the particular mechanistic equations and range of data used in this study, the more laborious non-linear analysis offered no advantage over linear regression in discriminating …

An Analysis Of The Geneva Mechanism As A Timing Device, Hubert W. Meyer

Theses

A mathematical analysis of the Geneva mechanism was conducted to determine the potential of this device as a tinting mechanism, and the feasibility of replacing the widely used pallet and starwheel escapement with a Geneva mechanism.

The primary objective of the study was to determine if the Geneva mechanism will attain a terminal velocity, and if so, how much time is required to reach this velocity.

To accomplish this objective, the differential equation of motion for the system was derived using Lagrangian dynatos. The equation was programmed and solved on a digital computer.

The study indicated that the Geneva mechanism …

Aboveground Fuel Oil Storage Tanks, Lawrence George Palmer

Theses

A review of the American Petroleum Institute Standard 650 and Appendixes points out the advantages of using high strength steel and the variable point design method (Appendix K) to obtain reasonably uniform shell stresses. Design limitations imposed by notch toughness and residual stresses are pointed out.

Design considerations for the installation of an internal floating roof in a standard cone roof tank are discussed. Methods of calculating evaporation losses and an economic justification for a floating roof are included. Budget estimate figures have been compiled as a function of tank capacity for tanks, site preparation and tank ringwall or piled …

Sidestream Tower Fractionation : A Short-Cut Calculation Method, Richard David Prickett

Theses

A short-cut procedure has been developed for making calculations on a complex fractionation tower. A Simplification of the Thiele-Geddes plate-to-plate procedure provided the basis for the short-cut procedure. The application discussed in this paper is for a tower with a liquid sidestream drawoff in the rectifying section.

The tower was broken at the feed point and sidestream drawoff locations into three calculation sections. The fractionation in each tower section can then be represented by a rigorous series solution expressed in terms of absorption or stripping factors. These rigorous equations can then be simplified by the use of average absorption or …

A Study Into The Feasibility Of Constructing A Pedestrian Mall In Newark Downtown, Stephen Wesley Warren

Theses

Newark's central business district has been suffering steady economic decline for at least a decade. In an attempt to halt this trend, and perhaps even reverse it, a feasibility study has been conducted toward the goal of implementing a pedestrian mall in the area.

This study was accomplished by conducting both field examinations of Halsey Street, the area under consideration, and investigating data from other existing United States pedestrian malls.

The results of this study show that it is feasible to construct a permanent pedestrian mall on Halsey Street and that the benefits of doing so far outweigh the costs …

Separation Of Glucose - Fructose - Water Systems Via Thermal Parametric Pumping, Zikri Mostafa Ahmed

Theses

Series of experiments were carried out to determine the effect of different factors on adsorption from aqueous solutions of sugar using fuller's earth ( LW 16-30 Mesh ) as an adsorbent. The equilibrium data were fitted to the Langmuir's equation., and an explanation for the deviation of some of these data has been given.

Systems of glucose-fructose and water mixtures were subjected to semi-continuous and continuous parametric pumping operations using activated carbon (400 Filterasorb) as an adsorbent. The results obtained confirm the equilibrium theory of the parametric pump and essentially fulfill the requirements established by Chen and Hill (6) to …

Digital Computer Solution Of Electromagnetic Transients In Large Power Systems, Bijan Navidbakhsh

Dissertations and Theses

This thesis is an introduction to the solution of electromagnetic transients by a combination of the Bergeran method of characteristics and the application of trapezoidal rule of integration.

Three test examples solved by digital computer illustrate the step by step solution and computer programming.

To compare this method with the Laplace transformation technique, a test problem solved by both methods and also digital computer is illustrated. In conclusion, the advantages and disadvantages of both methods are compared.

The Random Sequence Closing Control System, Henri Bernard Joyaux

Dissertations and Theses

This thesis describes a digital control system used by the Network Analog Group of the Bonneville Power Administration. This system, the Random Sequence Closing Control System, provides automatic control for a special purpose analog computer used in the study of switching surge over voltages on power transmission lines. This system, which uses pseudorandom data, has made it feasible to analyze switching surge phenomena on a statistical basis.

Resonant Raman Scattering From Iodine: Spectral Changes With Excitation Frequency, P. F. Williams, D. L. Rousseau

P. F. (Paul Frazer) Williams Publications

We have recorded high-resolution resonant Raman spectra of molecular iodine which show very pronounced systematic spectral band-shape variations with incident laser frequency. This frequency dependence and the presence of the multiple overtones in resonant Raman scattering from iodine may be explained by a theory in which the scattering intensity depends on Franck-Condon overlap integrals. We have obtained semiquantitative agreement between the observed spectra and spectra calculated from this theory.

Current Design Practice For Bridge Superstructures Connected To Flexible Superstructures, Jack H. Emanuel, J. Leroy Hulsey, John Best, Joseph H. Senne, Leroy E. Thompson

CCFSS Library (1939 - present)

No abstract provided.

State Estimation In Discrete-Time Linear Systems With Quadratic Form Observers, James Parish Shipley Jr.

Electrical and Computer Engineering ETDs

The problem considered in this dissertation is that of estimating the state of a system with a linear plant equation but having a measurement function which is a quadratic form in the state. It is first demonstrated by constructive proof that the problem has a solution if the controls have large enough magnitude, and some requirements on the minimum size of the control are discussed.

Three algorithms for estimating the state are obtained, one using the technique of maximum likelihood, the other two utilizing a more general Bayesian approach. In addition, a first-order approximate conditional mean filter is included for …

Electrical Parameter Correlations For Radiation Hardness Assurance Of Operational Amplifiers, John L. Mullis

Electrical and Computer Engineering ETDs

In the manufacture of integrated circuits, a consider­able amount of attention is given to controlling fabrication processes. This is required if high production yield and consistent quality are to be obtained. In addition to moni­toring critical parameters which are influenced by variables in processing, the packaged circuits undergo a variety of tests to determine whether they meet the desired electrical and environmental quality specifications. The problem of quality assurance is accepted and treated as an essential part of the production cycle.

Tartan Surfacing For An Equestrian Overpass, Donald C. Newberry Jr.

Kentucky Transportation Center Research Report

The location of I 64 in Jefferson County traverses Seneca Park, noted for its scenic beauty and superior recreational facilities. A bridle path in Seneca Park necessitated construction of an overpass for equine traffic. A non-slip and sound-deadening, resilient surface was essential for aesthetics and safety. Tartan, a rubbery mat developed primarily for race course and paddock surfaces, was specified and installed on the overpass.

High-Intensity Reflective Materials For Signs, Rolands L. Rizenbergs

Kentucky Transportation Center Research Report

Field observations and laboratory tests and evaluations were conducted on High-Intensity and Engineering grade materials (Scotchlite), manufactured by the Minnesota Mining and Manufacturing Company, and were compared in regard to reflectivity, durability, and cost.

The High-Intensity type materials were found to have outstanding performance characteristics in comparison to Engineering Grade materials. The material significantly enhances sign legibility under low-beam illumination, and accelerated weathering tests showed superior durability.

Characteristics And Models Of Outdoor Recreational Travel, Jerry G. Pigman, John A. Deacon

Kentucky Transportation Center Research Report

The purpose of this investigation was to examine the characteristics of outdoor recreational travel and to evaluate models of travel flow from population centers throughout the United States to outdoor recreational areas in Kentucky. Data were obtained by means of a license-plate, origin-destination survey at 160 sites within 42 recreational areas and by means of a continuous vehicle counting program at eight of these sites.

Among those characteristics of outdoor recreational travel which were examined in more detail were vehicle occupancies, vehicle classifications, and trip-length distributions. Vehicle occupancy was found to depend on the type of recreational area, distance traveled, …

Engineering Geognosy Of The Western Coal Field, W. Mccann, Tommy C. Hopkins, Robert C. Deen

Kentucky Transportation Center Research Report

Engineering soils and geologic reports are invaluable tools for engineers, industrial leaders, community planners and administrators during preliminary stages of planning and site selection for construction projects. Such information can be used to great advantage by planners in making soil and geologic reconnaissance surveys, in organizing and checking field surveys, in correlating and predicting performances of soil and geologic materials, and in locating construction materials and resource deposits. Recognizing the need for this type of information, the Division of Research, Bureau of Highways, Kentucky Department of Transportation, has undertaken a study to report the engineering geognosy of Kentucky. The report …

Pavement Roughness, Measurement And Evaluation, Rolands L. Rizenbergs, James L. Burchett, Larry E. Davis

Kentucky Transportation Center Research Report

Vertical accelerations of a passenger in an automobile are automatically summed while traveling a section of road at 51.5 mph (23.0 m/s). A roughness index is obtained by dividing this sum by the time elapsed during the test. Continuity in measurements since 1957 has been preserved through correlations among successive vehicles involved and reference pavements.

In general, bituminous construction has yielded smoother-riding surfaces than concrete construction. The smoothness of concrete pavements, however, has improved on those projects where slip-form paving was used. Interstate and parkway (expressway) construction continues to yield smoother pavements than other major construction. The rate of increase …

The Formation And Properties Of Machining Burrs, Laroux K. Gillespie

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The formation of burrs in Machining Operations occurs by three Basic Mechanisms:

1) Lateral Extrusion of material

2) Bending of the chip

3) Tearing of the chip form the workpiece

Each of these mechanisms has been studied analytically and compared to experimental results. The agreement between predictions and measurements has been found to be close.

Drilling, milling, grinding, and turning burrs were produced in 303Se stainless steel and their properties were related to tool geometry, feedrates, and depth of cut. One thousand measurements were made and subsequently analyzed by analysis of variance techniques. The properties measured include burr length and …

Long-Term Retention Of Tritium In Man, Chin-Jen Ou

Electronic Theses and Dissertations

[No abstract provided.]

Remedial Stability Analysis Of Unstable Eastern Approach Embankment, Bluegrass Parkway Bridges Over Chaplin River, Tommy C. Hopkins, S. M. Yoder

Kentucky Transportation Center Research Report

In a meeting held on March 7, 1973, the Division of Research was requested to perform a supplementary slope stability analysis of the unstable, eastern approach embankment and foundation located at the crossing of the Bluegrass Parkway over Chaplin River and extending between Stations 2317+14 and 2321+00. Previously (see referenced report), two remedial schemes had been considered for increasing the stability of the unstable soil mass to an acceptable level. Those included: 1) loading the toe area of the existing, eastern approach slope with a berm, including a sloping berm, and 2) unloading the upper portion of the eastern slope …

Air Pressures Over Reservoir, Canal, And Water Catchment Surfaces Exposed To Wind, Allen Ray Dedrick

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Surface air pressure differentials that occur over reservoirs, canals, and water-catchment aprons in high-wind conditions were determined by the use of models in a wind tunnel. Such information was needed concerning the magnitude and location of destructive wind forces on water barriers constructed of exposed flexible membrane liners. Rigid models, without a membrane, were used to measure airpressure differentials.

Air-pressure differentials were dependent on geometric configuration and were independent of viccous forces above the critical Reynolds number which was determined experimentally. The geometric factors studied with respect to reservoirs and canals included approach slope, approach slope length, leeward slope, and …