Engineering Commons^™

Calculation Of Sheet Steel Diaphragms In The Uk, E. R. Bryan

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

The Shear Flexibility Of Corrugated Steel Sheeting, R. M. Lawson, J. Michael Davies

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Progress Report On Cold-Formed Steel Purlin Design, Teoman Pekoz

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Application Of Cold-Formed Steel Sections To Primary Members Of Small Steel Buildings, Alejandro L. De La Barra

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Design Recommendations For Steel Deck Floor Slabs, Max L. Porter, C. E. Ekberg Jr.

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Design Vs. Test Results For Steel Deck Floor Slabs, Max L. Porter, C. E. Ekberg Jr.

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Design Example On Composite Steel Deck Floor Slabs, Thomas J. Mccabe

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

The Local Instability Of Thin-Walled Sections Under Combined Compression And Bending, J. Rhodes, James M. Harvey

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Buckling Of Plates And Beam Sections Under Stress Gradient, Shien T. Wang, Yei L. Tien

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Interaction Of Concentrated Load And Bending, George D. Ratliff Jr.

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Sheet Metal Panels For Use In Construction, Rolf Baehre

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Local Buckling In Channel Columns, John T. Dewolf

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Structural Behavior Of Tubular Sections, Donald R. Sherman

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Nonlinear Behavior Of Continuous Cold-Formed Beams, Ken P. Chong, David M. Mosier

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Study Of Cold-Formed Steel Beam Webs Subjected To Bending Stress, Roger A. Laboube, Wei-Wen Yu

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Application Of Cold-Formed Steel In Foundations, Andrew S. Zakrzewski

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Progress Report On Cold-Formed Steel Storage Rack Design, Teoman Pekoz, George Winter

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Dynamic Response Of Steel Industrial Storage Racks, C. K. Chen, S. A. Freeman

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Seismic Analysis And Design Of Cold-Formed Steel Structural Members, Suresh G. Pinjarkar

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Reliability Based Design Criteria For Temporary Cold-Formed Steel Buildings, Lawrence I. Knab, Niels C. Lind

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Analysis Of Cylindrical Grain Storages Made Of Cold-Formed Steel, George Abdel-Sayed

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Economic Study Of The Connection Safety Factor, Niels C. Lind, Lawrence I. Knab, W. Brent Hall

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

On The Shear-Center Of Thin-Walled Members, Daryoush Motarjemi

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Numerical Investigation Of The Flow Of A Stratified Fluid Past A Flat Plate, David L. Eddingfield

Mechanical Engineering ETDs

The two dimensional stratified flow past a flat plate is investigated numerically. The coordinates are stretched with a hyperbolic tangent mapping in order to place the computational boundaries at a sufficiently large distance from the plate. The growth of a boundary layer from the back of the plate as reported by R. R. Long was confirmed numerically. The boundary layer is found to increase in thickness from the back of the plate for values of the ratio of the Reynolds number to the Richardson number up to at least 20. In addition, the upstream influence of the plate is found …

Pedestrian Accidents In Kentucky, Charles V. Zegeer, Robert C. Deen

Kentucky Transportation Center Research Report

Pedestrian accident data in Kentucky were analyzed for 1972 and 1973 on a rural, urban, and statewide basis. Results showed that about 1500 pedestrian accidents occur in Kentucky each year. About 30 percent of the pedestrian accidents in rural areas and four percent in urban areas are fatal. Although about 78 percent of Kentucky's pedestrian accidents occur in urban areas, over 62 percent of the pedestrian fatalities occur in rural areas. Specific characteristics of pedestrian accidents were identified and related to human, environmental, and time factors. Highway and street improvements and safety measures generally considered to be effective in minimizing …

Identification Of Hazardous Locations On City Streets, Charles V. Zegeer

Kentucky Transportation Center Research Report

The purpose of this study was to develop an effective method for identifying hazardous locations in Kentucky cities (over 2,500 population). Methods used in 45 other states were reviewed. Accident information for 69 of the 97 cities over 2,500 population was used to develop criteria for an identification method.

A Number Method was selected for initial identification of midblocks and intersections on arterial-collector streets and on urban freeways. Rate-Quality Control Methods were included in the form of a critical rate factor computed for each location. A set of critical rate curves was constructed for easy determination of critical locations. A …

Mode Properties Of Annular Gain Lasers, Lee W. Casperson, Mohammad Shabbir Shekhani

Electrical and Computer Engineering Faculty Publications and Presentations

The properties of a new class of laser resonators are investigated theoretically and experimentally. In these lasers the radiation propagates longitudinally in an annular amplifying medium, and useful low loss modes can be obtained even when the axial region is obscured. Alignment characteristics and far field patterns are discussed, and experiments have been conducted using coaxial double-discharge CO₂ devices.

Inelastic Reserve Capacity Of Cold-Formed Beams With Stiffened Compression Elements, Hans Peter Reck, George Winter, Teoman Peköz

CCFSS Library (1939 - present)

PREFACE The present Report No. 356 deals with the inelastic reserve strength of cold-formed beams with stiffened compression flanges. The usual elastic design criterion regards the initiation of yielding in the outer fibers as defining failure. This criterion is used in Part I of the A.I.S.C. Specification and in the A.I.S.I. Specification for the design of steel structures. On the other hand, for so-called compact sections, as defined in the A.I.S.C. Specification, it is known that the actual maximum moment of a cross-section exceeds the initial yield moment and is reached only when yielding spreads over the entire section (complete …

Interpretation Of Tests On Welded Light Gage Steel Connections, Mark Shephard, George Winter, Teoman Peköz

CCFSS Library (1939 - present)

INTRODUCTION This report interprets the results of three sets of test data (Ref. 1 through 3) on welded light-gage cold-formed steel specimens. The tests were conducted at Cornell for the American Iron and Steel Institute on 252 symmetric puddle and fillet welded connections tested under monotonically increasing static load. The tested connections consisted of 130 shop welded specimens and 122 field welded specimens. All test connections had the same basic configuration being made up of center plates, referred to as parent plates or connected plates in the references, butted together with one or, in the case of the double sheet …

Adsorption On Activated Flyash, John William Kubarewicz

Theses

An experimental study was undertaken to compare the adsorptive characteristics of activated carbon, flyash, and activated flyash. Due to the contradictory evidence available in the literature, emphasis was placed on the effect of acid activation on the physical properties of the adsorbent. The experiment consisted of two parts; batch isotherm studies, and continuous column operations. An artificial sewage composed of a mixture of deionized water and beef broth was used as the adsorbate. This solution was prepared daily and exerted a COD of 225 ± 30 mg/l. Flyash activation was found to increase the degree of adsorption indirectly rather than …