Engineering Commons^™

Crack Propagation In Aluminum Sheets Reinforced With Boron-Epoxy, George Lawrence Roderick

Mechanical & Aerospace Engineering Theses & Dissertations

The literature has shown that crack propagation in cracked metal sheets can be significantly reduced by bonding an uncracked reinforcement to the metal sheet. However, cyclic debonding typically occurs over a localized area near the crack. Herein, an analysis was developed to predict both the crack growth and debond growth in a reinforced system. The analysis was based on the use of complex variable Green's functions for cracked, isotropic sheets and uncracked, orthotropic sheets to calculate inplane and interlaminar stresses, stress intensities and strain-energy-release rates. An iterative solution was developed that used the stress intensities and strain-energy-release rates to predict …

Relativistic Scattered-Wave Theory Ii. Normalization And Symmetrization, Cary Y. Yang

Electrical and Computer Engineering

Formalisms for normalization and symmetrization of one‐electron Dirac scattered‐wave wavefunctions are presented. The normalization integral consists of one‐dimensional radial integrals for the spherical regions and an analytic expression for the intersphere region. Symmetrization drastically reduces the size of the secular matrix to be solved. Examples for planar Pb₂Se₂ and tetrahedral Pd₄ are discussed.

Atomic Hydrogen Storage Method And Apparatus, John A. Woollam

Department of Electrical and Computer Engineering: Faculty Publications

Atomic hydrogen, for use as a fuel or as an explosive, is stored in the presence of a strong magnetic field in exfoliated layered compounds such as molybdenum disulfide or an elemental layer material such as graphite. The compound is maintained at liquid helium temperatures and the atomic hydrogen is collected on the surfaces of the layered compound which are exposed during delamination (exfoliation). The strong magnetic field and the low temperature combine to prevent the atoms of hydrogen from recombining to form molecules.

Leaf Spot Of Field Corn Caused By Pseudimonas Andropogonis, Anne K. Vidaver, Randall R. Carlson

Biological Process Development Facility: Staff Publications

A leaf spot of field corn was shown to be caused by the bacterium Pseudomonas andropogonis. Leaf spot symptoms were observed over 3 years in several States. Inoculation of corn by vacuum infiltration of the bacteria was necessary to reproduce field symptoms.

A bacterial leaf spot disease of different cultivars of field corn was observed in early summer of 1973, 1974, and 1975. Leaves with essentially the same symptoms were obtained from South Dakota, Iowa, Kansas, Nebraska, and Michigan. The same symptoms were also seen in Wisconsin. Symptoms consisted of circular to ellipsoidal, tan to brown spots, with irregular …

Irish H & V News Incorporating Zone

Building Services Engineering

No abstract provided.

The Effect Of Antimony, Chloride Ion, And Glue On Copper Electrorefining, Thomas J. O'Keefe, L. R. Hurst

Materials Science and Engineering Faculty Research & Creative Works

A study has been made to determine the effect of antimony, chloride ion, and glue on copper electrorefining. All deposits were made at a temperature of 65° C on a titanium cathode. Current densities of 398 A m-2 and 133 A m-2 were used. The deposits were analyzed by scanning electron microscopy (SEM) and X-ray diffraction (XRD) to determine morphology and crystal orientation. Atomic absorption (AA) and Auger spectroscopy (AES) were used to study the chemical composition of the deposits and a simple bend test was used to determine structural integrity. It was found that when the antimony concentration in …

A Synchronous Detection System For Dc Resistivity Mapping At The Earth's Surface, Stewart Lee Olsen

Electrical and Computer Engineering ETDs

Current practices in geothermal research require electrical prospecting methods such as resistivity mapping and profiling. This project was predicated on the need for an improved measurement technique for performing dc resistivity mapping at the earth's surface. A synchronous detection system provides automatic detection, recording, and flexible control for the signal current source used in resistivity mapping. As a part of this project, a synchronous detection system was designed, fabricated, and tested. The system incorporates a noise suppression scheme using the frequency-modulated spectrum of the noisy signal. The overall system, which includes a Synchronous Transmitter Control, a Synchronous Detector, and a …

Relativistic Xα–Scattered‐Wave Calculations For The Uranyl Ion, Cary Y. Yang, K. H. Johnson, J. A. Horsley

Electrical and Computer Engineering

Relativistic Xα–scattered‐wave molecular orbital calculations have been carried out on the uranyl ion UO²₂+. The calculated orbital eigenvalues are in good agreement with the results of a recent x‐ray photoelectron spectroscopy study of uranyl compounds. An interpretation of the optical spectrum of the uranyl ion in terms of a Hund’s case (c) (ω, ω) coupling scheme is given.

Heating Bridge Decks By Electrical Resistance, James H. Havens, Wm. Vernon Azevedo, Assaf S. Rahal, Robert C. Deen

Kentucky Transportation Center Research Report

The 9th-Street interchange was designed and constructed with an automated electrical heating system for snow and ice removal. This report describes the heating system, its construction, and initial operation. The heating system was capable of keeping the interchange free of ice and snow accumulation. The average daily slab temperature fell below 0°C (32°F) on only one occasion. The average cost of electrical power for heating the interchange was $1,075 per day.

Development Of Procedures For Preparation Of The Interstate Safety Improvement Program, Jerry G. Pigman, Kenneth R. Agent, Charles V. Zegeer

Kentucky Transportation Center Research Report

This report summarizes background information and presents the development of procedures for preparing and updating the lnterstate Safety Improvement Program. There are two major sections: (1) development of procedures for identifying safety needs and (2) development of procedures for prioritizing safety needs. Related to the identification of needs are eleven subsections which are based on historical data, inventories of existing facilities, and analysis of current data. Several accident surveillance procedures were used to identify sites, sections, and elements of the roadway which warrant improvements. Procedures for prioritizing safety needs are based on summaries of data from two reports by the …

Simulation Of External-Internal And Through Trips For Small Urban Areas, Jerry G. Pigman

Kentucky Transportation Center Research Report

The objective of this study was to develop models which would simulate internal-external trips and external-external (through) trips. Regression analysis and cross-classification of data were tested in an attempt to predict the number of internal-external trips and the percentage of through trips. Regression analysis was used in the development of a through-trip distribution model. Grouping data for analysis created some problems; however, trial-and-error evaluation enabled selection of variables which produced reasonable results. Variables found to be most significant in the development of internal-external models were population and employment. For through-trip models, variables used were population, functional classification, AADT at the …

Irish H & V News Incorporating Zone

Building Services Engineering

No abstract provided.

Energy From Swine Manure, J. R. Fischer, E. L. Iannotti, D. M. Sievers

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This paper discusses results of anaerobically digesting swine manure. Facts and figures are given on utilization of the energy from the anaerobic digester. Design parameters and some of the biochemical changes that occur during digestion are also given.

Strength Of Arc-Spot Weld In Sheet Steel Construction, Ching Fung

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The weld used by the steel deck erectors to anchor steel decking to structural steel framing is commonly known as "Puddle Weld". It is formed by arc-welding with stick electrodes to "melt" through the deck, resulting in puddle of molten steel durinlj the welding operation. Hence, the weld is commonly referred to in the trade as "Puddle Weld". Since the inception of this research projE:ct, this type of weld has been given a new technical name -the "Arc-Spot Feld" to reflect the actual welding process and the formation of the weld.

Bay Area Rapid Transit (Bart) Advertisment, [Circa 1978], Bay Area Rapid Transit

Mayor Moscone

Clippings about BART Advertisment

Replicating Bales Problem Solving Experiments On A Computerized Conference: A Pilot Study, Computerized Conferencing & Communications Center, Starr Roxanne Hiltz, Kenneth Johnson, Gail Agle

Computerized Conferencing and Communications Center Reports

Computerized Conferencing is a new form of communication in which the participants type their comments into a computer terminal, and receive their instructions and the comments of others printed on their terminal. This is a report on the results of a pilot study which was aimed mainly at exploring and solving the methodological problems presented by the need to adapt the procedures for conducting and coding face-to-face discussions to studies of this new medium. It represents the first set of controlled experiments on group discussions via a computerized conference.

The independent variable in this pilot study was mode of communication …

Research Options And Imperatives In Computerized Conferencing, Computerized Conferencing & Communications Center, Murray Turoff, Philip Enslow, Starr Roxanne Hiltz, John Mckendree, Raymond Panko

Computerized Conferencing and Communications Center Reports

This is the report resulting from a computerized conferencing workshop held on the subject of potential research opportunities and requirements in the area of utilizing a computer to aid human communications. It was sponsored by the Division of Mathematical and Computer Sciences of the National Science Foundation (grant # MCS76-80514). The views expressed in this report are those of the authors, and do not necessarily reflect NSF views or policy.

The workshop utilized the Electronic Information Exchange System (EIES) at the New Jersey Institute of Technology.

Metrication In Highway Design And Operations, Taher A. Al-Fadhli

Dissertations and Theses

The complex problem of metrication of highway design, construction and maintenance has been the subject of a number of studies and pilot projects carried out by the Federal Highway Administration (F.H.W.A.) of the United States and the Roads and Transportation Association of Canada. Through a research grant, the FHWA of the U.S.A. assigned the Ohio Department of Transportation, the Illinois Department of Transportation and the Oregon Highway Division to design, construct, and maintain these metric projects. The author has reviewed the experience and conclusions of these studies and the problems encountered in the pilot projects relative to the design, survey, …

Effects Of Surface Drainage On Dryland Salinity, P R. George, T. R. Negus

Journal of the Department of Agriculture, Western Australia, Series 4

Areas which are salt-affected are often also flooded. Although flooding is not the basic cause of salinity, surface drainage may improve conditions for plant growth, and this article describes suitable methods

Electronic Fuel Injection Techniques For Hydrogen Fueled Internal Combustion Engines, Carl Arthur Maccarley

Electrical Engineering

Numerous studies have demonstrated the advantages of hydrogen as a fuel for Otto Cycle engines due to high thermal efficiency and low exhaust pollutant levels. Characteristic of hydrogen engine operation using pre-mixed intake charge formation is a problem of pre-ignition resulting in an intake manifold "backfire." Additional problems include high NO production when using certain equivalence ratios and power output degradation due to low fuel energy/volume density.

Techniques for direct and manifold fuel injection are discussed as means for overcoming these problems. Emphasis is placed on the need for total engine control, integrating control of fuel injection, ignition timing, intake …

New Perspectives On The Materials Interface With The Three E'S -- Energy, Environment And Economics, Donald S. Remer

All HMC Faculty Publications and Research

New perspectives are presented on the material interface with the three E's -- Energy, Environment, and Economics. The past, present, and future energy picture is described from 1850 through the year 2030. The major energy sources such as oil, natural gas, coal, nuclear, and several new emerging energy options are compared and contrasted. The lead time, capital, and materials required for bringing on-stream new energy sources is described. Previous U.S. energy forecasts are reviewed and are found to be too optimistic. The U.S. materials situation is outlined with an emphasis on per capita materials use and the critical role that …

Test 1282: Steiger Tiger Iii St-450 And St-470 6-Speed (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Glossary Of Intelligence Terms, W. S. Liptak Cmdr, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

This glossary was scanned by Dr. Jonathan Clemente, an intelligence researcher, and shared with Professor Bolin.

This glossary was prepared by Commander W. S. Liptak apparently in support of a “Seminar on Reconnaissance and Technical Information Collection (SORTIC)” taught at the Defense Intelligence College.

This document consists of:

• An introduction concerning “Methodology”
• Glossary of Intelligence Terms and Definition
• Appendix A: Acronyms and Abbreviations
• Appendix B: Alternate Definitions
• Appendix C: Index of Other Intelligence Glossaries

Note:

The date given above is based on the dates of the glossaries listed in Appendix C.

Site Selection For Air Pollution Monitoring In The Vicinity Of Point Sources, John C. Brown

Retrospective Theses and Dissertations

Ever since air pollution became a national concern in the 1950's, more and more emphasis has been placed on collection of representative air samples for many purposed, to include (1) evaluation of the degree to which national ambient air quality standards are being met and (2) to monitor maximum emission levels from point sources. Until recently efforts were directed toward qualitative methods of siting monitors for representative sampling. Since the dispersion of effluents is most complex, the quality of the data collected on the basis of judgment and, more or less, incremental siting about the source, has become suspect. Furthermore, …

Low Cost Fencing, Department Of Agriculture, Western Australia

Journal of the Department of Agriculture, Western Australia, Series 4

Fences with more wire and posts are not necessarily stronger.

Design using high tensile wire can save on materials and reduce costs.

Deep Drainage As A Method Of Treating Saltland, Eric Bettenay

Journal of the Department of Agriculture, Western Australia, Series 4

In some situations, deep drainage may be warranted to return salt-affected land to full production.

This method is being investigated at CSIRO's Yalanbee Experiment Station.

Water Quality Analysis Laboratory Procedures Syllabus, P. A. Cowan, D. B. Porcella, V. D. Adams, L. A. Gardner

Reports

Introduction: The 1976 edition of "Methods of Chemical Analysis of Water and Wastes" describes chemical analytical procedures to be sued in Water Quality Office (WQO) laboratoires. The methods were chose through the combined efforts of the Regional Analytical Quality Control (AQC) Coordinators, Laboratory Quality Control Officers, and other senior chemicsts in both federal and state laboratories. Method selection was based on the following criteria: 1. The method should measure the desired constitutent with precision and accuracy suffiecient to meet the data needs of WQO in the presence of the interferences normally encountered in polluted waters. 2. The procedures should utilize …

Cell Quota Growth And Uptake Models Applied To Growth Of Selenastrum Capricornutum, Printz In A Non-Steady State Environment, Kenneth A. Voos, Ronald F. Malone, William J. Grenney

Reports

Recently propsed algal uptake and growth models dependent on the cell quote (Q), the intracellular limiting nutrient to cell population quotient, were analyze and applied to experimental data. The data base used for comparing the models consisted of

Cost Minimization For Coal Conversion Pollution Control: A Mixed Integer Programming Model, Michael F. Torpy, A. Bruce Bishop, Rangesan Narayanan

Reports

A mixed integer program was structured to identify the least cost combination of recycling and treatment alternatives that can be used to control the liquid, solid, and gas waste streams produced from a 750-megawatt coat fired steam electric power plant. The model compared methods of liquid stream recycle and waste discharge treatment to meet given air and water quality standards. The model was then used to study the effects on the optimal solution of changes in capital, operation and maintenance, and energy and water costs. In addition, the effects on optimum system design of changes in particulate and sulfur oxide …

Feasibility Of Accelerating Construction Of The Central Utah Project, Trevor C. Hughes, L. Douglas James, Frank Haws, C. Earl Israelsen

Reports

Introduction: Objective: In April, 1977 the President's statement on water projects recommended that a number of federal water development projects, including the Conneville unit of the Central Utah Project, not be completed. The ensuing efforts of project supporters brought about a review of the projected costs, benefits, and other political, social and environmental factors and consequently, the current issue is not whether or not the project should be constructed. Rather, the objective of this report is to examine the following question: Given the fact that at least the 5 units of the CUP which have already been authorized will eventually …