Engineering Commons^™

Congestion And Price Prediction In Locational Marginal Pricing Markets Considering Load Variation And Uncertainty, Rui Bo

Doctoral Dissertations

This work investigates the prediction of electricity price and power transmission network congestions under load variation and uncertainty in deregulated power systems. The study is carried out in three stages.

In the first stage, the mathematical programming models, which produce the generation dispatch solution, the Locational Marginal Price (LMP), and the system statuses such as transmission congestions, are reviewed. These models are often referred to as Optimal Power Flow (OPF) models, and can be categorized into two major groups: Alternating Current OPF (ACOPF) and Direct Current OPF (DCOPF). Due to the convergence issue with the ACOPF model and the concern …

Automated Correction And Optimized Contrast Enhancement Of Multi-Line Ccd Images, Zhiyu Chen

Doctoral Dissertations

This dissertation addresses automated correction and optimized contrast enhancement of multi-line CCD images for inspection and surveillance applications, focusing on three topics: multi-line CCD imaging systems setup, automated correction of multi-line CCD images, and automatic optimized image contrast enhancement.

generation, low cost, etc. However, due to the physical separation of line CCD sensors for the red (R), green (G), blue (B) color channel, the color images acquired by multi-line CCD cameras intrinsically exhibit a color misalignment defect, which is expressed as that the edges of objects in the scene are separated by a certain number of pixels in the R, …

Effects Of Overload And Underload On Internal Strains/Stresses And Crack Closure During Fatigue-Crack Propagation, Soo Yeol Lee

Doctoral Dissertations

The overload and/or underload occurring during constant-amplitude fatiguecrack growth result in the retardation and/or acceleration in the crack-growth rate, making it difficult to predict the crack-propagation behavior and fatigue lifetime. Although there have been numerous investigations to account for these transient crackgrowth behavior, the phenomena are still not completely understood.

Neutron and X-ray diffraction, and electric-potential measurements were employed to investigate these transient crack-growth micromechanisms; gain a thorough understanding of the crack-tip deformation and fracture behaviors under applied loads; and establish a quantitative relationship between the crack-tip-driving force and crack-growth behavior. Five different fatigue-crack-growth experiments (i.e., fatigued, tensile overloaded, compressive …

An Automated Diagnostic Tool For Predicting Anatomical Response To Radiation Therapy, Carley Elizabeth Harris

Doctoral Dissertations

A "Clinical Decision Support System" (CDSS) is a concept which has advanced rapidly in health care over the last few decades, and it is defined as "an interactive computer program that is designed to assist physicians and other health professionals with decision-making tasks." Radiation therapy oncologists are required to make decisions that do not involve making a disease diagnosis. Therefore this work focuses on developing a modified CDSS which can be used to aid oncology staff in identifying cancer patients who will require adaptive radiation therapy (ART).

An image-guided radiation therapy (IGRT) tool was developed that consists of both diagnostic …

Development And Analysis Of Interior Permanent Magnet Synchronous Motor With Field Excitation Structure, Seong Taek Lee

Doctoral Dissertations

Throughout the years Hybrid Electric Vehicles (HEV) require an electric motor which has high power density, high efficiency, and wide constant power operating region as well as low manufacturing cost. For these purposes, a new Interior Permanent Magnet Synchronous Motor (IPMSM) with brushless field excitation (BFE) is designed and analyzed. This unique BFE structure is devised to control the amount of the air-gap flux for the purpose of achieving higher torque by increasing the air-gap flux at low speed and wider operating speed range by weakening the flux at high speed.

On the process of developing the new IPMSM, the …

Experimental And Theoretical Investigation Of Adsorption Of Water Vapor On Carbon Nanotubes, Pyoungchung Kim

Doctoral Dissertations

The adsorption of water in nanoporous materials becomes an important issue in the environmental fate and applications when one considers the practical use of these materials as adsorbents for hazardous organic compounds in the diverse environments.

In this study, the complexity of water-SWNTs interaction was investigated by morphological and chemical characterization techniques, by gravimetric adsorption measurement and by interpretation of experimental adsorption isotherms by fitting to several existing semi-empirical water adsorption models. Commercially available SWNTs samples were measured for chemical and physical characterization such as O% by x-ray photoelectron spectroscopy, I_D/I_G by Raman spectroscopy and surface and …

Fundamental Mechanical-Behavior Studies Of Annealed And Nano-Particle-Strengthened Nickel-Based Alloys Using In-Situ Neutron-Diffraction Experiments, E-Wen Huang

Doctoral Dissertations

This dissertation addresses two issues concerning the fundamental mechanical behavior of the nickel-based superalloys: (1) the deformation mechanisms and (2) the nano-precipitate-strengthening effect. The precipitates are known to fortify the mechanical behavior of the metallic alloys. These precipitates can interact with the matrix upon the applied load. While the precipitation strengthening has been facilitated for many purposes, this research puts forward the mechanistic understanding.

The dissertation considers the thesis that Deformation Mechanisms and Nanoprecipitate Strengthening and their effects on the microstructure are central to the mechanical behavior of nickel-based superalloys.

The experimental methods employed in this research are in-situ neutrondiffraction …

Influence Of Turning On Military Vehicle Induced Rut Formation, Kun Liu

Doctoral Dissertations

Rut formation can severely influence soil conditions and vegetation, and reduce vehicle mobility. Vehicle operations can affect rut formation. Ruts formed in straight vehicle paths are different than when the vehicle turns. This research is mainly to investigate the effects of vehicle turning maneuvers on soil rut formation, including field tests, lab tests, and model development.

Field tests were conducted at Yuma Training Center, Fort Riley and Fort Lewis on wheeled and tracked military vehicles. In field tests, rut depth, rut width and rut index were used as the main indicators to quantify a rut. A Vehicle Tracking System was …

Design And Application Of Hybrid Multilevel Inverter For Voltage Boost, Haiwen Liu

Doctoral Dissertations

Today many efforts are made to research and use new energy sources because the potential for an energy crisis is increasing. Multilevel converters have gained much attention in the area of energy distribution and control due to its advantages in high power applications with low harmonics. They not only achieve high power ratings, but also enable the use of renewable energy sources. The general function of the multilevel converter is to synthesize a desired high voltage from several levels of dc voltages that can be batteries, fuel cells, etc.

This dissertation presents a new hybrid multilevel inverter for voltage boost. …

Direct Cooled Ceramic Substrate For Thermal Control Of Automotive Power Electronics, Kirk Townsend Lowe

Doctoral Dissertations

As electric vehicle technology develops, manufacturers would like to move toward hotter coolants for power electronic components to reduce system level costs. Thus, unique designs of inverter designs were sought to enable operation with 105°C coolant. The proposed solution in this research incorporated flow channels into the ceramic layer of the direct-bonded copper substrate typically found in power electronic packages. The focus of this research details the design and analysis of the direct cooled ceramic substrate from the perspective of its thermal performance and innovative packaging concept.

The research was directed to pursue alumina as the substrate ceramic because of …

A Study Of Polymer Electrolyte Membranes And Associated Interfacial Systems Via Molecular Dynamics Simulations, Junwu Liu

Doctoral Dissertations

The development of novel polymer electrolyte membrane (PEM) materials which operate at high temperature (i.e. > 100˚C) and low humidity conditions and efficiently transport protons has been a major focus for PEM fuel cell technology. The motivation behind a high temperature PEM fuel cell is based on the fact that, at high temperature, the catalysts used in the fuel cell are more active and less susceptible to poisoning due to impurities in the feed stream. The challenge lies in the fact that as the temperature is increased, the membrane loses water and its ability to transport protons. The successful design and …

Structural Health Monitoring And Damage Evaluation Of Full-Scale Bridges Using Triaxial Geophones: Controlled In-Situ Experiments And Finite Element Modeling, William S. Ragland Ii

Doctoral Dissertations

The purpose of this study was to evaluate the effectiveness of various vibration-based damage detection methods using triaxial vibration records obtained using inexpensive geophones during in-situ, full-scale, damaged bridge tests.

Geophones are passive directional sensors and much cheaper than accelerometers which are typically used for structural vibration measurements. However, magnitude and phase errors associated with a geophone’s output must be corrected for if they are implemented in bridge monitoring systems. This research discusses correction procedures for magnitude and phase errors associated with geophones. A simply supported beam was analyzed to verify that the correction procedures and modal parameter identification procedures …

Localized Deformation In Metallic Glasses At The Ambient Temperature, Shuangxi Song

Doctoral Dissertations

Metallic glasses have many unusual properties, such as extremely high strength and large elastic limit. However, they are also brittle, failing in a catastrophic manner, as a result of the formation of highly localized shear bands at room temperature. Such flow localization has been attributed to the influence of strain softening or local heating, or a combination of both, which leads to the local drop in viscosity and, finally, the runaway of the shear band.

In this thesis, a novel method was developed for in situ observation of the localized shear processes. The inhomogeneous deformation of metallic glasses at room …

Development Of Dbt Bridge System With Continuous Joints For Accelerated Construction, Lungui Li

Doctoral Dissertations

Speed of construction has become a critical issue to minimize disruption of traffic and commerce. One of the promising systems for accelerated bridge construction is the use of the decked bulb-tee (DBT) girders for the bridge superstructure. An integral deck that is precast and prestressed with the girder provides benefits of rapid construction along with improved structural performance. However, the limited research and concerns about the use of longitudinal joints as well as intermediate diaphragms limit widespread of the DBT bridge system.

This dissertation presents a study of the continuous for both moment and shear transfer longitudinal joint detail and …

Mechanical Behavior And The Role Of Deformation Twinning In Wrought Magnesium Alloys Investigated Using Neutron And Synchrotron X-Ray Diffraction, Liang Wu

Doctoral Dissertations

The mechanical behaviors and the associated deformation mechanisms with a focus on extension twinning under monotonic and cyclic loadings are investigated using neutron and synchrotron diffractions in the wrought magnesium alloys, ZK60A and AZ31B. It has been demonstrated that the extension twinning plays significant roles in the mechanical behaviors.

The significant tension-compression asymmetries and high anisotropies are observed. The tension-compression asymmetries are related to the twinning activation in one direction but not in the opposite direction. The high anisotropies are correlated with the initial texture distinction relative to the loading directions. The similar yielding stresses are noted irrespective of the …

Exercise Power Grid Display And Web Interface, Alexander (Alex) Chernetz

Computer Engineering

The 2008-2009 expansion of the Recreation Center at Cal Poly includes three new rooms with cardiovascular fitness equipment. As part of its ongoing commitment to sustainable development, the new machines connect to the main power grid and generate power during a workout. This document explains the process of quantifying and expressing the power generated using two interfaces: an autonomous display designed for a television with a text size and amount of detail adaptable to multiple television sizes and viewing distances, and an interactive, more detailed Web interface accessible with any Java-capable computer system or browser.

Formula Sae Interchangeable Independent Rear Suspension Design, Mike Mccune, Daniel Nunes, Mike Patton, Courtney Richardson, Evan Sparer

Mechanical Engineering

The Suspension Solutions design team has completely designed built and tested an independent rear suspension system for the 2008 FSAE car. The car currently features a solid rear axle, and the task of converting it to incorporate an interchangeable rear suspension has been undertaken in order to quantify the advantages and disadvantages of each design philosophy. The car has been properly tested with both the solid axle and independent rear suspension side-by-side, however more testing is suggested. After pushing both setups to their limits on a 50ft diameter skid pad, the test results were quantified, and a final comparison between …

Broccoli Floret Cutter: Gold Coast Packaging, Inc., Sean Stamm, Walter Salguero, Felipe Gomez Jr, Ruben Duenas

Mechanical Engineering

No abstract provided.

Material Sustainability, Jessica Meadows, Natasha Morris

Architectural Engineering

This paper addresses the sustainability of the materials used to construct buildings today. Timber, concrete and steel are analyzed for carbon output, cost, and recyclable-ability.

Tsukahara: A Comprehensive Web Solution Designed To Simplify The Process Of Hosting A Gymnastics Meet., Jonathan Thomassian

Computer Science and Software Engineering

The process of setting up a gymnastics meet is long and complicated. Most meets organized today involve large amounts of paperwork by both organizing gyms and attending gyms. Tsukahara seeks to address this issue by providing a comprehensive web based solution, to make it easy for gyms to both host and attend meets.

Analysis And Selection Of New Rental Paintball Masks For Gladiator Paintball Park, Geoff Wakefield

Industrial and Manufacturing Engineering

This project is designed to select new rental paintball masks for Gladiator Paintball Park. The currently used rental masks are worn down and need replacement. Criteria for new rental masks are examined and include customer preferences, owner's constraints, and time studies. Candidate masks were found by asking customers what they like in rental masks, interviewing other paintball field owners, and referring to the online paintball community. Three candidate masks were found, the V-Force Vantage, JT Alpha, and Kingman java paintball masks. These masks were compared to the currently used rental masks, the V-Force Armor. Customers were surveyed to find out …

Acs Custom Creation's New Business And Assembly Operations, Kent Christensen

Industrial and Manufacturing Engineering

ACS Custom Creations had assembly and business operations that wasted time and wasted money. The objective of the project is to improve and implement ACS Custom Creations business and manufacturing operations. The proposed assembly process involves the rearranging of the bottlenecked steps to eliminate constraints. The assembly workstations were also redesigned to reduce cycle time. With the improvement of the new assembly and business operations, ACS is poised to grow into a bigger company. Financial Statements were created to improve visibility of the company’s historical data. These financial statements include an income statement, balance sheet, and a cash flow statement. …

Solder Qwik Pentm, Katherine E. Robbins

Industrial and Manufacturing Engineering

Electronics soldering is a technique used frequently in the manufacturing of Printed

Circuit Boards (PCB) to attach small electronic parts or wires together. Often times

the need to remove a solder joint arises; this is known as desoldering. Solder wick,

fine braided copper wire infused with rosin, is one of the most effective ways to

desolder because it results in the cleanest joints. Currently using solder wick

involves several time consuming and somewhat awkward steps. This report will

cover the process behind designing, manufacturing, and testing a new ergonomic,

dispenser for solder wick that can be used with one hand. …

Design, Reconstruction And Evaluation Of A Dynamometer For Quarter Scale, Samuel Sanchez

BioResource and Agricultural Engineering

This project discusses the design, reconstruction, and evaluation of a dynamometer. A new test stand for the Quarter Scale team would improve the testing of the engines and the Continuously Variable Transmission (CVT). All the readings will be done electronically in order to provide the most accurate data collection. The dynamometer will be a closed hydraulic system for ease of use. This system will be able to test all of Quarter Scale engines. The data collected will be used to determine which engines are in the best condition, and which may need to be fixed. With the new design, the …

Design, Construction And Evaluation Of A Fueltank/Tool Box Combination, Michael R. Chase Jr

BioResource and Agricultural Engineering

This project is the design and development of a combination tool box and auxiliary fuel tank built as a single unit, specifically built for a 2000 Ford F250 short bed truck; having a fuel capacity exceeding 50 gallons; meeting federal requirements for motor vehicle fuel tanks; performing as an auxiliary tank using the factory fuel gauge and having a tool box that can carry a wide array of tools. This paper will describe the design considerations, the regulation requirements, the material selection, and the construction process of the combination tool box/fuel tank.

Removal Of Biofilm Through Controlled Cavitation, Mathew Chackalackal Mathew

Master's Theses - Daytona Beach

Human kind is poised to take the next "giant step" in space exploration, the manned mission to Mars, among other things. But before any plans for such long term habitation on an alien planet, there has to be consideration towards prevention and removal of bacterial contamination. Bacterial contamination or rather degradation of materials was considered of negligible importance. Bacterial degradation can be serious for long-term manned space mission, more so because there is no way to obtain quick replacements. For such conditions, a new innovative way of bacterial removal has been proposed wherein the bacteria is removed with no damage …

Module Cover Conductivity Enhancement, Niles Dhanens, James Fortner

Mechanical Engineering

A clam shell module cover for printed circuit boards (PCB) has been designed for use in Boeing’s AECM cabinet. The cover utilizes materials with high thermal conductivity and cools the PCB by conducting the heat to a cold plate interface. Materials were compared and aluminum 6061-T6, aluminum 3003, and annealed pyrolytic graphite (APG) were chosen. A prototype was built and tested using aluminum 6061-T6 which was able to dissipate 57.7% of the projected wattage. Issues may include unforeseen complications in assembly along with components performing at lower levels than specified by manufacturers. The APG prototype was unable to be tested …

Session Initiation Protocol Server Implementation For Linksys Routers, Matthew Duder

Computer Science and Software Engineering

Session Initiation Protocol (SIP) is a signaling protocol used for network-based media interaction. SIP Servers are required to process and forward requests and responses between end clients. Once connection setup is complete, the end clients utilize some other protocol (such as Real-Time Transport Protocol) to complete their task.

Such a server may be implemented and installed on routers. Unlike the SIP protocol, however, router development currently remains without standards. For this project, Linux-based residential-grade routers had their kernels replaced with an open source version. This allowed for installation of open-source development, such as a SIP server implementation.

This project led …

Redesigning Src2pkg, A Linux Package Creation Toolkit, Timothy Goya

Computer Science and Software Engineering

Package managers ease installation and removal of applications. However, as the name indicates, in order for a package manager to be useful, they need packages created from upstream sources to manage. This is the purpose of src2pkg, a toolkit written in Bash shell script which automates many package creation tasks. src2pkg, however, suffers from major design flaws that cripple its ability to package some exotic upstream sources. src2pkg-ng is a prototype redesign of src2pkg that eliminates these flaws. src2pkg-ng fully supports creating packages for Slackware and Slackware-compatible variants for at least 21 upstream sources with various levels of complexity. Debian …

An Integrated Database Management System And Building Information Modeling For Sustainable Design, Sultan Althobaiti

Masters Theses

The use of Building Information Modeling (BIM) with sustainable design is getting widespread since it helped architects, engineers, and contractors in achieving the sustainability goal. The present work is using green and certified products and materials to be integrated with Building Information Model (BIM) to simulate and generate a conceptual design for green and sustainable design. The use of Building Information Modeling (BIM) would help achieving sustainability, which would be predictable and possible. Revit Architecture is a tool of BIM technology that can be used for building designing and modeling.

The research represents a database system for green building products …