Engineering Commons^™

Kinematic Analysis Of Gait In An Underwater Treadmill Using Land-Based Vicon T 40s Motion Capture Cameras Arranged Externally, Shreyas L. Raghu, Ryan T. Conners, Chang-Kwon Kang, David B. Landrum, Paul N. Whitehead

PRC-Affiliated Research

Aquatic therapy for rehabilitation can be performed in a variety of environments, which can vary from a traditional swimming pool to a self-contained underwater treadmill. While kinematic analysis has been performed in large volume swimming pools using specific underwater motion capture systems, researchers may only have access to a land-based motion-capture system, which is not waterproof. Additionally, underwater motion capture systems may not fit within the confines of a smaller underwater treadmill. Thus, the purpose of this study was to design and analyze methodology to quantify lower limb kinematics during an aquatic treadmill session, using a land-based motion capture system. …

Kinematic Analysis Of Gait In An Underwater Treadmill Using Land-Based Vicon T 40s Motion Capture Cameras Arranged Externally, Shreyas L. Raghu, Ryan T. Conners, Chang-Kwon Kang, David B. Landrum, Paul N. Whitehead

PRC-Affiliated Research

Aquatic therapy for rehabilitation can be performed in a variety of environments, which can vary from a traditional swimming pool to a self-contained underwater treadmill. While kinematic analysis has been performed in large volume swimming pools using specific underwater motion capture systems, researchers may only have access to a land-based motion-capture system, which is not waterproof. Additionally, underwater motion capture systems may not fit within the confines of a smaller underwater treadmill. Thus, the purpose of this study was to design and analyze methodology to quantify lower limb kinematics during an aquatic treadmill session, using a land-based motion capture system. …

The Effect Of Room-Temperature Aging On Enthalpy And Dielectric Property Of Carbon-Fiber/Epoxy Composite Prepreg And The Mechanical Property Of Manufactured Composite, Monjur Morshed Rabby, Minhazur Rahman, Partha Pratim Das, Muthu Ram Prabhu Elenchezhian, Relebohile George Qhobosheane, Vamsee Vadlamudi

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

Fiber-based reinforced plastics are widely used materials in different industries - e.g., Automotive, Aerospace, Defense- because of their various advantages. The most reliable raw materials for manufacturing fiber-based composites are pre-impregnated reinforcing fiber (prepreg). However, the limitation of using prepreg lies in its instability at room temperature. Prepregs have a specific out-life which sometimes makes the manufacturing process difficult. The objective of this study is to find out a way to investigate the room temperature aging effect on prepreg by analyzing the enthalpy and dielectric properties. In this study, differential scanning calorimetry (DSC) was used to measure the reaction enthalpy …

Artificial Intelligence In Real-Time Diagnostics And Prognostics Of Composite Materials And Its Uncertainties – A Review, Muthu Ram Prabhu Elenchezhian, Vamsee Vadlamudi, Rassel Raihan, Kenneth Reifsnider, Erick Reifsnider

UTARI Researcher Publications-Archive

In the era of the 4th industrial revolution of big data, Artificial Intelligence (AI) is widely used in each and every field of composite materials which includes design and analysis, material storage, manufacturing, non-destructive testing (NDT), Structural Health Monitoring (SHM) and Prognostics of its Remaining Useful Life (RUL), Material State (MS) and damage modes. While these AI models are rapidly developed and integrated into the Industrial Internet of Things (IIoT) to keep track of the health of a composite material from its birth to death, these integrations remain uncertain for prognostics without the certainty of its previous material state. This …

Replication Data For: Study Of Methane Migration In The Shallow Subsurface From A Gas Pipe Leak, Kathleen Smits

Earth & Environmental Sciences Datasets - Archive

With the increased use of natural gas, safety and environmental concerns from underground leaking natural gas pipelines are becoming more widespread. What is not well understood in leakage incidents is how the soil conditions affect gas migration behavior, making it difficult to estimate the gas distribution. To shed light on these concerns, an increased understanding of subsurface methane migration after gas release is required to support efficient leak response and effective use of available technologies. In this study, three field-scale experiments were performed at the Methane Emission Technology Evaluation Center in Colorado State University to investigate the effect of soil …

Thermochemistry Of Combustion In Polyvinyl Alcohol + Hydroxylammonium Nitrate, James K. Baird, Robert A. Frederick Jr.

PRC-Affiliated Research

A mixture of polyvinyl alcohol (PVA) and hydroxylammoniun nitrate (HAN) forms a gummy solid known as a plastisol, which is ionically conducting. When an electrostatic potential of 200 V DC is applied across the plastisol, it ignites. Combustion ceases upon removal of the applied voltage. The products of PVA + HAN combustion are known to include the molecular gases carbon monoxide, carbon dioxide, water, nitrogen, and hydrogen. When the electric field within the plastisol is spatially uniform, combustion occurs preferentially at the anode. The fact that HAN is an ionic conductor suggests that the mechanism of combustion is electrolytic in …

Thermochemistry Of Combustion In Polyvinyl Alcohol + Hydroxylammonium Nitrate, James K. Baird, Robert A. Frederick Jr.

PRC-Affiliated Research

A mixture of polyvinyl alcohol (PVA) and hydroxylammoniun nitrate (HAN) forms a gummy solid known as a plastisol, which is ionically conducting. When an electrostatic potential of 200 V DC is applied across the plastisol, it ignites. Combustion ceases upon removal of the applied voltage. The products of PVA + HAN combustion are known to include the molecular gases carbon monoxide, carbon dioxide, water, nitrogen, and hydrogen. When the electric field within the plastisol is spatially uniform, combustion occurs preferentially at the anode. The fact that HAN is an ionic conductor suggests that the mechanism of combustion is electrolytic in …

The Probability Of Success-Through Fault Tree Analytical Binomial Result, Tyleka Riddle

Night Flight: Online Literary Journal

Prestigious Appeal Rule of Thumb (Ear Drum Plugs)

In truant fashion, with proven accidental probabilistic perception for proposed cued facial expression recognition and voice commands without filtering. The estimated cost analysis for design and development generated from the enhanced project in the word "no”: Additionally, an audio noise effect size (ES) for desired level of comprehensive sensory receptors in sound reference to noisy party syndrome. Sytoss, (2019) "Resulting in a cocktail party theory for chalkboard distinction and conversation with applied facial recognition. As well as, the enhanced project management tool, EPMT, to provide output and input determination for higher-level acoustic …

Supporting Materials From The Program "Development Of A Physically-Based Creep Model Incorporating Eta Phase Evolution For Nickel Base Superalloys", N. R. Mohale, C. L. White, P. G. Sanders, W. W. Milligan, J. P. Shingledecker, P. A. Bridges

Michigan Tech Research Data

This research was funded by the US Department of Energy, Fossil Energy Program, Grant Number DE-FE0027822, with Omer Bakshi as the Program Manager. The grant conditions required that all supporting data and materials would be made publicly-available. This public repository was created on May 13, 2021.

Spatial Coherence Of Low-Frequency Unsteadiness Associated With A Normal Shock Wave, Matthew Cox, Phillip M. Ligrani, Kyle Goethals

PRC-Affiliated Research

The present data illustrate a unique analysis approach to explore the physics of shock-wave-flow interactions, based upon correlation and spectral analysis of digitized shadowgraph visualization time-sequence data. As such, demonstration is provided of the use of high resolution, flow visualization data for quantitative correlation and spectral analysis. A shadowgraph system is employed to visualize time-varying, shock wave flow features within the test section of one leg of the transonic/supersonic wind tunnel (which is also referred to as the SS/TS/WT or SuperSonic/TranSonic/WindTunnel), located within the Propulsion Research Center of the University of Alabama in Huntsville. Of interest is a flow field …

Spatial Coherence Of Low-Frequency Unsteadiness Associated With A Normal Shock Wave, Matthew Cox, Phillip M. Ligrani, Kyle Goethals

PRC-Affiliated Research

The present data illustrate a unique analysis approach to explore the physics of shock-wave-flow interactions, based upon correlation and spectral analysis of digitized shadowgraph visualization time-sequence data. As such, demonstration is provided of the use of high resolution, flow visualization data for quantitative correlation and spectral analysis. A shadowgraph system is employed to visualize time-varying, shock wave flow features within the test section of one leg of the transonic/supersonic wind tunnel (which is also referred to as the SS/TS/WT or SuperSonic/TranSonic/WindTunnel), located within the Propulsion Research Center of the University of Alabama in Huntsville. Of interest is a flow field …

Analysis, Modeling, And Simulation (Ams) Case Studies Of Connected And Automated Vehicle (Cav) Implementations Specific To The South Central Region, Christopher Melson, Jiaqi Ma

Data

Connected and automated vehicles (CAVs) offer potentially transformative and far-reaching impacts to the transportation system. However, realized benefits will be directly tied to how well agencies prepare for these technologies. This report documents efforts that support CAV preparatory actions in Louisiana and includes: (1) conducting a stakeholder survey to inform engagement activities to develop strategic partnerships in CAV deployment and (2) conducting crash analyses for deployment scenarios of CAV-based queue warning systems (QWSs).

An electronic survey was developed and disseminated to 273 Louisiana organizations. The purpose of the survey was to engage these organizations under the context of CAV planning …

Highly Branched Polymers Based On Poly(Amino Acid)S For Biomedical Application, Marisa Thompson, Carmen Scholz

PRC-Affiliated Research

Polymers consisting of amino acid building blocks continue to receive consideration for biomedical applications. Since poly(amino acid)s are built from natural amino acids, the same building blocks proteins are made of, they are biocompatible, biodegradable and their degradation products are metabolizable. Some amino acids display a unique asymmetrical AB2 structure, which facilitates their ability to form branched structures. This review compares the three forms of highly branched polymeric structures: structurally highly organized dendrimers, dendrigrafts and the less organized, but readily synthesizable hyperbranched polymers. Their syntheses are reviewed and compared, methods of synthesis modulations are considered and variations on their traditional …

Highly Branched Polymers Based On Poly(Amino Acid)S For Biomedical Application, Marisa Thompson, Carmen Scholz

PRC-Affiliated Research

Polymers consisting of amino acid building blocks continue to receive consideration for biomedical applications. Since poly(amino acid)s are built from natural amino acids, the same building blocks proteins are made of, they are biocompatible, biodegradable and their degradation products are metabolizable. Some amino acids display a unique asymmetrical AB2 structure, which facilitates their ability to form branched structures. This review compares the three forms of highly branched polymeric structures: structurally highly organized dendrimers, dendrigrafts and the less organized, but readily synthesizable hyperbranched polymers. Their syntheses are reviewed and compared, methods of synthesis modulations are considered and variations on their traditional …

Simulation Of Optical Properties Of Dielectric Layers From Visible To Near Infrared Spectral Range, Andrew Cochran, Cory Conkel

ONU Student Research Colloquium

Optical properties of dielectrics play a critical role in various applications including the design and manufacture of optical components & devices such as detectors, filters, imagers, lenses, optical coatings, photonic crystals, sensors and waveguides, and solar cells. Radiative properties of varying thicknesses of different dielectrics such as Aluminum Oxide (Al2O3), Silicon Dioxide (SiO2), Indium Tin Oxide (ITO), Magnesium Fluoride (MgF2) and Silicon Nitride (Si3N4) have been simulated and compared in the range of visible to near infrared by mathematical modelling using MATLAB simulations. The results of the evolution of the radiative properties, as a function of dielectric material thickness, on …

Heuristics For Capacity Allocation And Queue Assignment In Congested Service Systems With Stochastic Customer Demand And Immobile Servers, Adam Colley

Operations Research and Engineering Management

We propose easy-to-implement heuristics for a problem referred to in the literature as the facility location problem with immobile servers, stochastic demand, and congestion, or the service system design problem. The problem is typically posed as one of allocating capacity to a set of M/M/1 queues to which customers with stochastic demand are assigned with the objective of minimizing a cost function composed of a fixed capacity-acquisition cost, a variable customer-assignment cost, and an expected-waiting-time cost. The expected-waiting-time cost results in a non-linear term in the objective function of the standard binary programming formulation of the problem. Thus, the solution …

Louver And Effusion Cooling Heat Transfer For A Double Wall Effusion Plate With Impingement Jet Array Coolant Supply, Sneha Reddy Vanga, Phillip M. Ligrani, Joseph Knox, Federico Liberatore, Rajeshriben Patel, Ying-Hsiang Ho

PRC-Affiliated Research

Louver slot cooling is employed, which consists of an aligned collection of film cooling holes, contained within a specially-designed device which concentrates, and directs the coolant from a slot, so that cooling air then advects as a layer downstream along the test surface. This louver-supplied coolant is then supplemented by coolant which emerges from different rows of downstream film cooling holes. Coolant for both cooling arrangements is supplied using an array of impingement jets. Experimental data are provided for a mainstream Reynolds number Rems range of 168,000–181,000. Full-coverage film cooling initial blowing ratio values are 2.5, 3.2, 4.4, and 5.2, …

Determination Of The Feature Resolution Of Processed Image Data Via Statistical Analysis, Joseph S. Indeck, Jesus O. Mares Jr., James P. Vitarelli, Kavan Hazeli

PRC-Affiliated Research

A method is presented to determine the feature resolution of physically relevant metrics of data obtained from segmented image sets. The presented method determines the best-fit distribution curve of a dataset by analyzing a truncated portion of the data. An effective resolvable size for the metric of interest is established when including parts of the truncated dataset results in exceeding a specified error tolerance. As such, this method allows for the determination of the feature resolution regardless of the processing parameters or imaging instrumentation. Additionally, the number of missing objects that exist below the resolution of the instrumentation may be …

Louver And Effusion Cooling Heat Transfer For A Double Wall Effusion Plate With Impingement Jet Array Coolant Supply, Sneha Reddy Vanga, Phillip M. Ligrani, Joseph Knox, Federico Liberatore, Rajeshriben Patel, Ying-Hsiang Ho

PRC-Affiliated Research

Louver slot cooling is employed, which consists of an aligned collection of film cooling holes, contained within a specially-designed device which concentrates, and directs the coolant from a slot, so that cooling air then advects as a layer downstream along the test surface. This louver-supplied coolant is then supplemented by coolant which emerges from different rows of downstream film cooling holes. Coolant for both cooling arrangements is supplied using an array of impingement jets. Experimental data are provided for a mainstream Reynolds number Rems range of 168,000–181,000. Full-coverage film cooling initial blowing ratio values are 2.5, 3.2, 4.4, and 5.2, …

Hydrothermal Synthesis And Structural Investigation Of A Crystalline Uranyl Borosilicate, Kristen A. Pace, Vladislav V. Klepov, Mark D. Smith, Travis Williams, Gregory Morrison, Jochen A. Lauterbach, Scott T. Misture, Hans Conrad Zur Loye

Faculty Publications

The relevance of multidimensional and porous crystalline materials to nuclear waste reme-diation and storage applications has motivated exploratory research focused on materials discovery of compounds, such as actinide mixed-oxoanion phases, which exhibit rich structural chemistry. The novel phase K1.8 Na1.2 [(UO2)BSi4 O12 ] has been synthesized using hydrothermal methods, rep-resenting the first example of a uranyl borosilicate. The three-dimensional structure crystallizes in the orthorhombic space group Cmce with lattice parameters a = 15.5471(19) Å, b = 14.3403(17) Å, c = 11.7315(15) Å, and V = 2615.5(6) Å3, and is composed of UO6 octahedra linked by [BSi4 O12 ]5− chains to …

Determination Of The Feature Resolution Of Processed Image Data Via Statistical Analysis, Joseph S. Indeck, Jesus O. Mares Jr., James P. Vitarelli, Kavan Hazeli

PRC-Affiliated Research

A method is presented to determine the feature resolution of physically relevant metrics of data obtained from segmented image sets. The presented method determines the best-fit distribution curve of a dataset by analyzing a truncated portion of the data. An effective resolvable size for the metric of interest is established when including parts of the truncated dataset results in exceeding a specified error tolerance. As such, this method allows for the determination of the feature resolution regardless of the processing parameters or imaging instrumentation. Additionally, the number of missing objects that exist below the resolution of the instrumentation may be …

Effects Of Flight Altitude On The Lift Generation Of Monarch Butterflies: From Sea Level To Overwintering Mountain, Madhu K. Sridhar, Chang-Kwon Kang, Brian D. Landrum, Hikaru Aono, Shannon L. Mathis, Taeyoung Lee

PRC-Affiliated Research

Aerodynamic efficiency behind the annual migration of monarch butterflies, the longest among insects, is an unsolved mystery. Monarchs migrate 4000 km at high-altitudes to their overwintering mountains in Central Mexico. The air is thinner at higher altitudes, yielding reduced aerodynamic drag and enhanced range. However, the lift is also expected to reduce in lower density conditions. To investigate the ability of monarchs to produce sufficient lift to fly in thinner air, we measured the climbing motion of freely flying monarchs in high-altitude conditions. An optical method was used to track the flapping wing and body motions inside a large pressure …

Data-Driven Cfd Scaling Of Bioinspired Mars Flight Vehicles For Hover, Jeremy A. Pohly, Chang-Kwon Kang, Brian D. Landrum, James E. Bluman, Hikaru Aono

PRC-Affiliated Research

One way to improve our model of Mars is through aerial sampling and surveillance, which could provide information to augment the observations made by ground-based exploration and satellite imagery. Flight in the challenging ultra-low-density Martian environment can be achieved with properly scaled bioinspired flapping wing vehicle configurations that utilize the same high lift producing mechanisms that are employed by insects on Earth. Through dynamic scaling of wings and kinematics, we investigate the ability to generate solutions for a broad range of flapping wing flight vehicles with masses ranging from insects O(10−3) kg to the Mars helicopter Ingenuity O(100) kg. A …

Data-Driven Cfd Scaling Of Bioinspired Mars Flight Vehicles For Hover, Jeremy A. Pohly, Chang-Kwon Kang, Brian D. Landrum, James E. Bluman, Hikaru Aono

PRC-Affiliated Research

One way to improve our model of Mars is through aerial sampling and surveillance, which could provide information to augment the observations made by ground-based exploration and satellite imagery. Flight in the challenging ultra-low-density Martian environment can be achieved with properly scaled bioinspired flapping wing vehicle configurations that utilize the same high lift producing mechanisms that are employed by insects on Earth. Through dynamic scaling of wings and kinematics, we investigate the ability to generate solutions for a broad range of flapping wing flight vehicles with masses ranging from insects O(10−3) kg to the Mars helicopter Ingenuity O(100) kg. A …

On The Influence Of Heat Treatment On Microstructure And Mechanical Behavior Of Laser Powder Bed Fused Inconel 718, Jakob Shroder, Tatiana Mishurova, Tobias Fritsch, Itziar Serrano-Munoz, Alexander Evans, Maximilian Sprengel, Maximilian Sprengel, Manuela Klaus, Giovanni Bruno

PRC-Affiliated Research

A range of heat treatments have been developed for wrought Inconel 718 to obtain desired properties. For additively manufactured Inconel 718, the recently developed standard ASTM F3301 provides guidance for heat treatment of powder bed fusion specimens. Although this standard is based on standards developed for wrought Inconel 718, it does not include direct aging. Since direct aging reduces the number of processing steps, it can result in a post processing cost reduction if the desired properties are obtained. In this study, we characterized the microstructure and tensile behavior of Inconel 718 specimens produced by a laser powder bed fusion …

On The Influence Of Heat Treatment On Microstructure And Mechanical Behavior Of Laser Powder Bed Fused Inconel 718, Jakob Shroder, Tatiana Mishurova, Tobias Fritsch, Itziar Serrano-Munoz, Alexander Evans, Maximilian Sprengel, Maximilian Sprengel, Manuela Klaus, Giovanni Bruno

PRC-Affiliated Research

A range of heat treatments have been developed for wrought Inconel 718 to obtain desired properties. For additively manufactured Inconel 718, the recently developed standard ASTM F3301 provides guidance for heat treatment of powder bed fusion specimens. Although this standard is based on standards developed for wrought Inconel 718, it does not include direct aging. Since direct aging reduces the number of processing steps, it can result in a post processing cost reduction if the desired properties are obtained. In this study, we characterized the microstructure and tensile behavior of Inconel 718 specimens produced by a laser powder bed fusion …

Louver Slot Cooling And Full-Coverage Film Cooling With A Combination Internal Coolant Supply, Austin J. Click, Phillip M. Ligrani, Maggie Hockensmith, Joseph Knox, Chandler Larson, Avery Fairbanks, Federico Liberayore, Rajeshriben Patel

PRC-Affiliated Research

Within the present investigation, a louver slot is employed upstream of an array full-coverage film cooling holes. Cooling air is supplied using a combination arrangement, with cross-flow and impingement together. The louver consists of a row of film cooling holes, contained within a specially designed device that concentrates and directs the coolant from a slot, so that it then advects as a layer downstream along the test surface. This louver-supplied coolant is then supplemented by coolant which emerges from different rows of downstream film cooling holes. The same coolant supply passage is employed for the louver row of holes, as …

Louver Slot Cooling And Full-Coverage Film Cooling With A Combination Internal Coolant Supply, Austin J. Click, Phillip M. Ligrani, Maggie Hockensmith, Joseph Knox, Chandler Larson, Avery Fairbanks, Federico Liberayore, Rajeshriben Patel

PRC-Affiliated Research

Within the present investigation, a louver slot is employed upstream of an array full-coverage film cooling holes. Cooling air is supplied using a combination arrangement, with cross-flow and impingement together. The louver consists of a row of film cooling holes, contained within a specially designed device that concentrates and directs the coolant from a slot, so that it then advects as a layer downstream along the test surface. This louver-supplied coolant is then supplemented by coolant which emerges from different rows of downstream film cooling holes. The same coolant supply passage is employed for the louver row of holes, as …

Strain Field_X, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘Strain field_x’ spreadsheet is the radial strain information of all the nodes. The first two columns of data are location information of the node in pixel coordinates. The third column is the information recorded at the first time, the fourth column is the information recorded at the second time, and so on.

Supporting information

Strain Field_Y, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘Strain field_y’ spreadsheet is the axial strain information of all the nodes. Data format is the same as ‘Strain field_x’

Supporting information