Engineering Commons^™

Analytical Hierarchy Process Evaluation Of The Proposed Slim Modular Flexible Electric Bus Rapid Transit System, Yunji Kim

Master of Science in Civil Engineering Theses

As metropolitan Atlanta area is the one of the fastest growing regions in the nation, its demand for transportation infrastructure has grown. The region between Cobb County and Fulton County experiences the heaviest congestion in Metro-Atlanta. CobbLinc Route 10 is the only form of public transportation serving this area. To relieve the congestion and provide more effective public transportation system, Connect Cobb Corridor project has been proposed with the possible implementation of Bus Rapid Transit (BRT) system. Although BRT has gained popularity for its operational flexibility and efficiency, efforts have been put into developing a new concept vehicle that is …

Sensor Technologies For Intelligent Transportation Systems, Juan Guerrero-Ibáñez, Sherali Zeadally, Juan Contreras-Castillo

Information Science Faculty Publications

Modern society faces serious problems with transportation systems, including but not limited to traffic congestion, safety, and pollution. Information communication technologies have gained increasing attention and importance in modern transportation systems. Automotive manufacturers are developing in-vehicle sensors and their applications in different areas including safety, traffic management, and infotainment. Government institutions are implementing roadside infrastructures such as cameras and sensors to collect data about environmental and traffic conditions. By seamlessly integrating vehicles and sensing devices, their sensing and communication capabilities can be leveraged to achieve smart and intelligent transportation systems. We discuss how sensor technology can be integrated with the …

Comprehensive Bicycle-Vehicle Crash Investigation On Urban And Rural Roadways In Alabama, Naveen Mallipaddi

Research Horizons Day Posters

No abstract provided.

Bicycle Safety Investigation In Alabama Using Historical Crash Data And Stated-Preference Survey, Sydnie Fiocca

Research Horizons Day Posters

No abstract provided.

How Sustainable Are Drone (Uav) Deliveries?, Miguel Figliozzi

PSU Transportation Seminars

Private companies and public officials are seeking sustainable and cost effective ways to green supply chains and freight deliveries. There is enthusiasm regarding the potential benefits that innovative technologies such as drones or unmanned aerial vehicles (UAVs) can generate. This presentation discusses key issues and insights that arise from modeling the logistical, and environmental performance of UAVs.

Transportation Impacts Of Affordable Housing: Informing Development Review With Travel Behavior Analysis, Amanda Howell

PSU Transportation Seminars

Planning for affordable housing is challenged by development policies that often do not differentiate between the travel patterns of residents of market-rate housing and those living in affordable units. The development review process generally requires an evaluation of the anticipated additional transportation demand that new development places on the system and an assessment of fees or improvements to mitigate these impacts.

However, industry standard guidelines for assessment of travel demand outlined within the Institute of Transportation Engineers (ITE) Trip Generation Handbook have been focused solely on vehicle trip rates for these traffic impact analyses. Given the public goals of providing …

A Methodological Framework For Quantifying Impacts Of Truck Traffic On Regional Network With Implications To Transport Policy, Chaitanya Narendra Pathak

Dissertations

Increased global trade has promoted the importance of shipping industry and the introduction of mega-ships has created an opportunity to be more cost-effective. Because of this, the expected change in freight transportation influences the operating regimes and schedules at the port terminals. Trucks being the predominant mode of transportation used to carry the freight transport, there is a growing concern about the impact of trucks in the region. The problems are further expected to grow as the improvements to resolve them are hindered by funding shortfalls. Public agencies are therefore involved in developing comprehensive state freight plans that outline immediate …

Developing Knowledge Management Strategies, Bryan Gibson, Candice Y. Wallace, Steven Douglas Kreis

Kentucky Transportation Center Research Report

Retirements and other staff changes have led to a loss of institutional knowledge across public agencies. These changing workforce dynamics have highlighted the study of knowledge management, and how organizations can best retain their core knowledge bases. Key to understanding knowledge management is how organizations have approached the issue and the most effective methods and processes they have used to retain, store, and disseminate knowledge. Part of the knowledge management discussion includes core competencies, or what basic knowledge and skills are essential to an organization’s mission. Also, considering the impacts of outsourcing on public employment, is another key to understanding …

Redefining Commercial Vehicle Permitting And Credentialing Violations, Andrew Martin, Jennifer R. Walton, Valerie J. Keathley

Kentucky Transportation Center Research Report

The objective of this study was to analyze enforcement and adjudication of common commercial vehicle tax, credentialing, and safety offenses. This study examined violations of the International Fuel Tax Agreement and the Kentucky Intrastate Tax, Kentucky’s weight distance tax, Unified Carrier Registration, Kentucky size and weight laws, and federal safety regulations from 2004 to 2013. Statistical analysis showed declining conviction rates, increasing dismissal rates, and a drop in collections of court costs and fines associated with these offenses. In addition, adjudication varied significantly from district court to district court, which is creating an equity issue for motor carriers and the …

Longer Lasting Bridge Deck Overlays, David Q. Hunsucker, Kean H. Ashurst Jr., Brad W. Rister, David L. Allen, Eileen Grady

Kentucky Transportation Center Research Report

The objective of this report is to determine the most effective method for bridge deck overlay construction and repair by assessing current practices; examining new products and technologies; and reviewing NCHRP (National Cooperative Highway Research Program) guidelines, state standard specifications, ASCE (American Society of Civil Engineers) infrastructure ratings, and original bridge core chloride penetration data. Based on the review, this report offers the following conclusions. Latex modified concrete (LMC) overlays perform well, provide a long service life, and are the most commonly used method of bridge deck rehabilitation. Ohio considers microsilica concrete (MSC) overlays as state of the art due …

Mash Test No. 3-10 Of A Non-Proprietary, High-Tension, Cable Median Barrier For Use In 6h:1v V-Ditch (Test No. Mwp-9), Mojdeh Asadollahi Pajouh, Karla A. Lechtenberg, Ronald K. Faller, James C. Holloway, Robert W. Bielenberg, Scott K. Rosenbaugh

Nebraska Department of Transportation: Research Reports

The Midwest Pooled Fund Program has been developing a prototype design for a non-proprietary, high-tension, cable median barrier for use in a 6H:1V median V-ditch. This system incorporates four evenly spaced cables, Midwest Weak Posts (MWPs) spaced at 8 to 16 ft (2.4 to 4.9 m) intervals, and a bolted, tabbed bracket to attach the cables to each post. Full-scale crash testing was needed to evaluate the barrier’s safety performance. According to the Manual for Assessing Safety Hardware 2016 (MASH) testing matrix for cable barriers installed within a 6H:1V median V-ditch, a series of eight full-scale crash tests are required …

Phase Ii Evaluation Of Floor Pan Tearing For Cable Barrier Systems, Dylan T. Meyer, Mojdeh Asadollahi Pajouh, Karla A. Lechtenberg, Ronald K. Faller, Robert W. Bielenberg, James C. Holloway

Nebraska Department of Transportation: Research Reports

The objective of this research effort was to mitigate the potential for floor pan tearing and penetration into the occupant compartment by modifying the posts utilized in a prototype cable barrier system. A series of dynamic component tests were conducted on the modified Midwest Weak Post (MWP). A bogie vehicle was equipped with a simulated floor pan designed to replicate the height, thickness, and strength of the floor pan of a Kia Rio. Two methods of post modification were investigated, including edge protection on the top of the MWP as well as weakening of the MWP at the ground line. …

Operational Impact Of Shadow Evacuation On Regional Road Networks During Short-Notice Emergency Evacuations, Efe Emre Tuncer

LSU Master's Theses

As part of evacuation planning, development of effective tactical and operational strategies are essential to safely and efficiently mobilize the public away from the threat. Evacuations are classified by the time between notification and the anticipated arrival of the threat which can be categorized as short, or no-notice emergencies. Emergencies involve the computation of the time required to evacuate the area of risk, which is the time to clear a radius of up to about 10-miles around the nuclear power plant, known as the emergency planning zone (EPZ). These evacuation time estimates (ETE) also account for the evacuation of the …

Transit Demand Analysis And User Classification Using Automatic Fare Collection (Afc) Data, Alireza Khani

PSU Transportation Seminars

Development of origin-destination demand matrices is crucial for transit planning. The development process is facilitated by transit automated data, making it possible to mine boarding and alighting patterns on an individual basis. This research proposes a novel stochastic trip chaining method which uses Automatic Fare Collection (AFC) and General Transit Feed Specifications (GTFS) data to infer an origin-destination (O-D) matrix.

When To Use Midwest Guardrail System (Mgs) W-Beam Guardrail, Katherine Smutzer

Purdue Road School

In this session we will discuss when MGS w-beam guardrail should be placed on state and local projects and review pertinent INDOT Design Memos released over the past year.

Incorporating Ada And Aps Work On Traffic Contracts: Design Guidance And Construction Standards, Joseph Bruno

Purdue Road School

The presentation provides an overview of the Indiana Department of Transportation's design guidance and construction standards on curb ramps and accessible pedestrian signals. The presentation also summarizes the Indiana Department of Transportation's policy on when existing curb ramps and pedestrian pushbuttons must be upgraded as part of a traffic construction contract and when an upgrade is optional.

Practical Overview Of Revised Section 918, Geosynthetics_Piccoli, Santino Piccoli

Purdue Road School

INDOT Standard Specifications Section 918, Geosynthetics, has been revised and updated, broadening the tools available to designers and contractors challenged with variable soil types and site conditions. The revision effort included harmonizing Section 200, 600, and 900 language relative to the design and use of geosynthetics. Section 918 broadly pertains to geosynthetics, which includes geotextiles, geogrids, geocells, geomembranes, and geocomposites. This session includes a practical discussion about specific changes to geotextile specifications and the addition of geotextile types.

Overview Of Performance Based Practical Design, Christopher W. Van Dyke, Jeff Jasper, Adam J. Kirk

Kentucky Transportation Center Research Report

State transportation agencies (STAs) have increasingly turned to practical design and performance based practical design (PBPD) to inform project development and implementation — and to reduce project costs while optimizing systemwide benefits. PBPD is a design-up philosophy that encourages agencies to formulate projects to meet the purpose and need rather than adhering to ostensibly immutable design standards. This paper reviews practical design and PBPD concepts and initiatives and their application in a variety of contexts. It also summarizes best practices STAs can use to develop a PBPD program. As a holistic approach to project design, PBPD underscores context sensitive solutions …

Review Of State Transportation Funding Initiatives, Bryan Gibson, Christopher W. Van Dyke, Steven Waddle, Steven Douglas Kreis

Kentucky Transportation Center Research Report

Despite significant cutbacks to the funding allocated to state departments of transportation (DOTs), demand for accessible and reliable transportation has increased even as existing transportation infrastructure has continued to age. Falling gasoline tax revenues resulting from increasing fuel efficiency and technological advancements have prevented state DOTs, including the Kentucky Transportation Cabinet (KYTC), from funding and financing much-needed transportation projects. Meanwhile, the Federal Highway Trust Fund, which provides funding to states and is tied to the federal gas tax, routinely receives cash infusions from the Federal General Fund to remain solvent—the federal gas tax has not been increased since 1993. Needing …

Road Diet V2.0 - Road Diet With Roundabouts, Michael Williams

PSU Transportation Seminars

How can we go one step, or one lane, further than the standard road diet? Roundabouts allow a road diet to reduce the final number of lanes from three to two.

Questions arise when roundabouts are used with a road diet. What traffic volumes are supportable? Will the roundabouts fit within existing intersections? What does current guidance tell us about this approach?

Michael Williams will present his work on creating a sequel to FHWA’s Road Diet Informational Guide. This work is intended to provide a feasibility determination tool for the application of this approach to existing corridors. Data from Bird …

Evaluation Of Route Changes Utilizing High-Resolution Gps Bus Transit Data, Travis Bradley Glick

PSU Transportation Seminars

Congestion and travel delay on urban roadways can influence operating costs and service attractiveness. This research uses high resolution bus data to examine sources of delay on urban arterials. A set of tools was created to help visualize trends in bus behavior and movement; this allowed larger traffic trends to be visualized along urban corridors and urban streets. By using buses as probes and examining aggregated bus behavior, contoured speed plots can be used to understand the behavior of roadways outside the zone of influence of bus stops. Speed plots can be utilized to discover trends and travel patterns with …

Piezocone Penetration Testing Device, Chung R. Song, Benyam M. Bekele, Brian Sawyer

Nebraska Department of Transportation: Research Reports

Hydraulic characteristics of soils can be estimated from piezocone penetration test (called PCPT

hereinafter) by performing dissipation test or on-the-fly using advanced analytical techniques. This

research report presents a method for fast estimation of hydraulic conductivity of overconsolidated soils

based on the piezocone penetration test. The method relies on an existing relationship developed for the

determination of hydraulic conductivity of normally consolidated soils on-the-fly. The present research

revises this relationship so that it can be applied for overconsolidated soils by incorporating a proper

correction equation. The revised relationship provides a pore pressure representing the hydraulic

conductivity of a hypothetical “equivalent …

Utilization Of Light Detection And Ranging For Quality Control And Quality Assurance Of Pavement Grades, Brad W. Rister, Levi Mcintosh, Gabriel B. Dadi, Ruigang Yang, Eileen Grady

Kentucky Transportation Center Research Report

Light Detection and Ranging (Lidar) technology is a useful tool that can assist transportation agencies during the design, construction, and maintenance phases of transportation projects. To demonstrate the utility of Lidar, this report discusses how Lidar data can be used while performing quality control and quality assurance (QC/QA) of pavement grades along road segments where safety concerns have been identified (e.g., increased crash rates due to water ponding on the roadway). Researchers modeled surface runoff using Lidar data for several roadways that had experienced significant crash increases during wet-weather events. Based on this modeling, the Kentucky Transportation Cabinet (KYTC) undertook …

Hot Applied Sealant Bond Test For Joints With Penetrating Sealers, Lieska Halsey

Nebraska Department of Transportation: Research Reports

Recently a concern has been raised for hot applied sealant bond for joints with penetrating sealers. The objective of this study will be to determine if the bond between the sealant and the concrete is compromised by the sealer currently approved to be used in Nebraska. The expected results will be that the bond is not compromised and is serving for the expected joint service life.

Systematic Approach To Identifying Deeply Buried Archeological Deposits, Anthony L. Layzell, Rolfe D. Mandel, Courtney L. Ziska, John R. Bozell

Nebraska Department of Transportation: Research Reports

This project is designed to assist cultural resource specialists involved in Nebraska Department of Transportation (NDOT) and the Federal Highway Administration (FHWA) project planning and development. The goal was to develop Geographic Information System (GIS) data layers that spatially delineate different landform-sediment assemblages (LSAs) and depict the associated geologic potential for buried cultural deposits in select watersheds in Nebraska. The Nebraska Buried Sites GIS resource will allow planners and cultural resource specialists to determine whether future project areas are likely to be free of deeply buried sites or whether subsurface exploration is necessary.

Compressive Strength Of Concrete Cylinders By Different Preparation Methods: Sulphur, Neoprene Pads And Grinding, Wally Heyen, Lieska Halsey

Nebraska Department of Transportation: Research Reports

The purpose of this evaluation is to compare the effects of four types of cylinder preparation methods prior to compressive strength testing in accordance to ASTM C 39.

Corrosive Strength Of Concrete Cylinders By Different Preparation Methods: Sulphur, Neoprene Pads And Grinding, Wally Heyen, Lieska Halsey, Tim Krason

Nebraska Department of Transportation: Research Reports

The purpose of this evaluation is to compare the effects of four types of cylinder preparation methods prior to compressive strength testing in accordance to ASTM C 39.

Spot-R By Triax, Purdue Ect Team

ECT Fact Sheets Archive

Triax’s Spot-r system was developed to tackle the construction industry’s unique safety and productivity challenges, stemming from a demonstrated lack of total jobsite visibility and automatically collected, easily accessible field data. Spot-r by Triax combines a proprietary mesh network with sensor technology to record and transmit previously unattainable workforce and equipment location, activity and safety data within a defined area – all in real-time.

The Spot-r network is installed around the site and operates in a 900 MHz network, with a subset using a cellular connection to forward Spot-r sensor data to Triax’s custom, cloud dashboard. In the hazardous construction …

Purdue’S Biowall, Purdue Ect Team

ECT Fact Sheets Archive

Mechanical ventilation, energy recovery ventilation, and infiltration (air that leaks into a building) are commonly used to introduce fresh air. These are all valid approaches, but a living plant-based filter is an innovative complement to these traditional technologies. A Biowall has the potential to improve indoor air quality while reducing the quantity of air needed for ventilation, creating the potential for energy savings. Figure 1 shows a Biowall prototype being evaluated in the ReNEWW House, a research home located near the Purdue University campus (http://www.renewwhouse.com/).

Mdp (Machine Drive Power) Intelligent Compaction Technology, Purdue Ect Team

ECT Fact Sheets Archive

Caterpillar developed MDP (Machine Drive Power) technology to fill this gap. Rather than an accelerometer and vibratory drum, it uses the principle of rolling resistance to provide indications of soil stiffness. This allows it to perform more reliably on cohesive and granular soils with less variability than accelerometer systems. It also means that the technology can be used on both vibratory and static drum compactors, which are often used on larger sites. While the technology is quite useful on its own, it is even better as a complementary technology to the existing accelerometer-based systems. Contractors who use vibratory soil compactors …