Engineering Commons^™

Extracting Bus Transit Boarding And Alighting Information Using Smart Card Transaction Data, Zhen Chen, Wei Fan

Journal of Public Transportation

The smart card–based automated fare collection (AFC) technologies provide new opportunities for transportation data collection since smart card data (SCD) contain a significant amount of archived information that can be gathered and leveraged to help estimate public transit origin-destination (OD) matrices. Both boarding and alighting location detection are important particularly when there is no automatic vehicle location (AVL) system or other information in the database. With the analysis of raw data using limited information in this paper, an algorithm for boarding stop identification is presented after the trip direction and boarding cluster identification. Alighting stops are then identified based on …

Mobility-As-A-Service: Assessing Performance And Sustainability Effects Of An Integrated Multi-Modal Simulated Transportation Network, Mohamed El-Agroudy

Electronic Theses and Dissertations, 2020-2023

Advances in information technology services have seen profound impacts on the state of transport services in the urban traffic environment. Mobility-as-a-Service (MaaS) represents the digital consolidation of users, operators, and public-private managing entities to provide totally comprehensive, integrated trip-making services. Users now enjoy extra flexibility for trip-making with new modal alternatives such as micro-mobility (e.g Lime Bikes, Spin Scooters) and rideshare (e.g. Lyft, Uber). However, current knowledge on the performance and interactive effects of these newer alternative modes is vague if not inconsistent. As such, these effects were studied through micro-simulation analysis of a multi-modal urban corridor in Orlando, Florida. …

Evaluation Of Safety And Mobility Benefits Of Connected And Automated Vehicles By Considering V2x Technologies, Md Hasibur Rahman

Electronic Theses and Dissertations, 2020-2023

The recent development in communication technologies facilitates the deployment of connected and automated vehicles (CAV) which are expected to change the future transportation system. CAV technologies enable vehicles to communicate with other vehicles through vehicle-to-vehicle (V2V) communications and the infrastructure through Vehicle-to-infrastructure (V2I) communications. Since the real-world CAV data is not currently available as of today, simulation is the most commonly used platform to evaluate the future V2X system. Although several studies evaluated the effectiveness of CAVs in a small roadway network, there is a lack of studies analyzing the impact of CAVs at the network level by considering both …

A Deep Learning Approach For Real-Time Crash Risk Prediction At Urban Arterials, Pei Li

Electronic Theses and Dissertations, 2020-2023

Real-time crash risk prediction aims to predict the crash probabilities within a short time period, it is expected to play a crucial role in the advanced traffic management system. However, most of the existing studies only focused on freeways rather than urban arterials because of the complicated traffic environment of the arterials. This thesis proposes a long short-term memory convolutional neural network (LSTM-CNN) to predict the real-time crash risk at arterials. The advantage of this model is it can benefit from both LSTM and CNN. Specifically, LSTM captures the long-term dependency of the data while CNN extracts the time-invariant features. …

A Case Study Of Drone Delivery Reliability For Time-Sensitive Medical Supplies With Stochastic Demand And Meteorological Conditions, Travis B. Glick, Miguel Figliozzi, Avinash Unnikrishnan

Civil and Environmental Engineering Faculty Publications and Presentations

Drones are increasingly being utilized to deliver medical supplies, and the COVID-19 pandemic has accelerated this trend. Drones arrive quickly by taking more direct paths and avoiding ground-based obstructions. However, drones are not completely reliable and may also experience failures and delays. For consumer products, delivery delays are an inconvenience, but for some medical supplies, delays may be fatal. This research focuses on the drone reliability of one particular type of supply and event: automatic defibrillators for out-of-hospital cardiac arrests (OHCA). A modeling framework is developed to analyze drone delivery reliability with stochastic demands and meteorological conditions. Using probability distributions …

Corrigendum To “Heavy Metal Ion Detection On A Microspot Electrode Using An Optical Electrochemical Probe” [Electrochem. Commun. 86 (2018) 94–98], Santanu Roy, Abhijeet Prasad, Rahul Tevatia, Ravi Saraf

Mid-America Transportation Center: Final Reports and Technical Briefs

The authors regret to inform an error. Ravi F. Saraf of this pub- lication discloses financial interest in Vajra Instrument as its founder and President. In accordance with its Conflict of Interest policy, the University of Nebraska-Lincoln’s Conflict of Interest in Research Committee has determined that this must be disclosed. The authors would like to apologise for any inconvenience caused.

Degrader Analysis For Diagnostic And Predictive Capabilities: A Demonstration Of Progress In Dod Cbm+ Initiatives, William Baker, Steven Nixon, Jeffrey Banks, Karl Reichard, Kaitlynn Castelle

Engineering Management & Systems Engineering Faculty Publications

This paper presents a modified reliability centered maintenance (RCM) methodology developed by The Applied Research Laboratory at The Pennsylvania State University (ARL Penn State) to meet challenges in decreasing life cycle sustainment costs for critical Naval assets. The focus of this paper is on the requirements for the development of the on-board Prognostics and Health Management (PHM) system with a discussion on the implementation progress for two systems: the high pressure air compressor (HPAC), and the advanced carbon dioxide removal unit (ACRU). Recent Department of Defense (DoD) guidance calls for implementing Condition Based Maintenance (CBM) as an alternative to traditional …

The Relationship Between Roadway Homogeneity And Network Coverage For Network Screening, Riana Tanzen

Theses and Dissertations--Civil Engineering

In the context of transportation safety engineering, network screening is a method of identifying and prioritizing high-risk locations for potential safety investment. Since its release, the Highway Safety Manual (HSM) has facilitated the adoption of Safety Performance Functions (SPF) to predict the number of crashes for the network screening of any facility type. The predictive model becomes more reliable when developed from crash data with homogeneous roadway segments and this homogeneity can be attained by applying specific geometric attributes to the dataset. The caveat to this method is the requirement of adjustment factors (AFs) to adjust the predicted estimate for …

Design And Analysis Of A Pavement Marker Detection System, Timothy L. Johnson Ii

Theses and Dissertations--Civil Engineering

Personal injuries and property damage due to the failure of snow-plowable pavement markers which detach from pavement surfaces has led to the development of new all-plastic pavement markers which are located entirely below the planar surface of the pavement. The new all-plastic design pushes existing solutions used to avoid striping over highway reflectors into obsolescence since current solutions operate using electromagnets to sense the metal housings of snow-plowable pavement markers. A replacement solution is currently sought by the highway maintenance industry and three different marker detection methods were developed and tested on real-world highways with both new and aging pavement …

Methodology For Quantifying Resiliency Of Transportation Systems, Hannah Rose Russell

Doctoral Dissertations and Master's Theses

The National Science Foundation’s definition of resiliency is “the ability to prepare and plan for, absorb, recover from, or more successfully adapt to actual or potential adverse events” (National Science Foundation, 2016). While this definition is informative and useful, it lacks a quantitative reference. There is a need for a method of quantifying resilience to better plan and prepare for system wide disruptions. The research effort described herein provides a quantifiable measures of system resiliency, consistent with NSF’s definition. Fundamentally, a system disruption can be partitioned into five distinctive states: the stable pre-event state, the absorption state, the disrupted state, …

Life Cycle Information Models With Parameter Uncertainty Analysis To Facilitate The Use Of Life-Cycle Assessment Outcomes In Pavement Design Decision-Making, Chaitanya Ganesh Bhat

Dissertations, Master's Theses and Master's Reports

The objective of this dissertation is to develop Life Cycle Information Models (LCIMs) to promote consistent and credible communication of potential environmental impacts quantified through Life-Cycle Assessment (LCA) methodology. The introduction of Life Cycle Information Models (LCIMs) will shift the focus of pavement LCA stakeholders to collect reliable foreground data and adapt to consistent background data present within LCIMs. LCA methodology requires significant Life Cycle Inventory (LCI) data to model real world systems and quantify potential environmental impacts. The lack of guidance in ISO standards on consistently compiling LCI data and defining protocols for modeling lowers the reliability of LCA …

The Laboratory Performance And Aging Characteristics Of Rubber Modified Asphalt Mixture Using A Dry Process, Dongdong Ge

Dissertations, Master's Theses and Master's Reports

The accumulation of waste tires generates severe environmental issues. Using crumb rubber processed from waste tires on the pavement could relieve the pressure of waste tire on the environment and improve the performance of the pavement as well. The application of crumb rubber on the pavement using the dry process was proved to be a cost-effective strategy in some projects, however, the interaction between the rubber and asphalt binder was unknown in the rubber modified asphalt mixture using the dry process, especially when reclaimed asphalt pavement was adopted. The performance improvement of the rubber particle to the asphalt mixture was …

Feasibility Study Of Development Of Ultra-High Performance Concrete (Uhpc) For Highway Bridge Applications In Nebraska, Flavia Ribeiro Furtado De Mendonca, Mostafa Abo El-Khier, George Morcous, Jiong Hu

Nebraska Department of Transportation: Research Reports

Ultra-high performance concrete (UHPC) is a new class of concrete that has superior mechanical, durability, and workability properties that far exceed those of conventional concrete. To achieve these properties, a specific mix design with a very dense internal structure, fiber reinforcement, and low water-to-binder ratio (w/b) is commonly used. The goal of this research is to develop a non-proprietary UHPC mix with constituent materials that are readily available in the state of Nebraska for bridge construction applications. In developing this mix, the particle packing model is used, and an experimental study of the impact of various design parameters on the …

Evaluation Of Tie-Bar Anchoring Methods: Non-Shrink Grout Vs. Epoxy, Wally Heyen, Lieska Halsey, Tim Krason, Brandon Varilek, David Hansen

Nebraska Department of Transportation: Research Reports

Tie bars are epoxy coated steel bars that connect the longitudinal joints in concrete pavement. Tie bars prevent faulting and joint separation between lanes Tie bars can be placed into the plastic concrete or inserted after curing by drilling and anchoring with epoxy or non-shrink grout. The specification for the tie bars requires the use of a No. 5 bar, 18 inches long and shall meet ASTM A775 / A775M [1], Section 1020.The Nebraska Department of Transportation “Standard Specifications for Highway Construction,” (Section 603.03) requires contractors to mechanically insert tie bars into the face of pavements during construction. Tie bars …

Influence Of Curing Conditions On Concrete Specimens (Cylinders) In Hot And Cold Weather In The Field, Wally Heyen, Lieska Halsey, Tim Krason, David Hansen

Nebraska Department of Transportation: Research Reports

No abstract provided.

Estimating Free-Flow Speed With Lidar And Overhead Imagery, Armin Hadzic

Theses and Dissertations--Computer Science

Understanding free-flow speed is fundamental to transportation engineering in order to improve traffic flow, control, and planning. The free-flow speed of a road segment is the average speed of automobiles unaffected by traffic congestion or delay. Collecting speed data across a state is both expensive and time consuming. Some approaches have been presented to estimate speed using geometric road features for certain types of roads in limited environments. However, estimating speed at state scale for varying landscapes, environments, and road qualities has been relegated to manual engineering and expensive sensor networks. This thesis proposes an automated approach for estimating free-flow …

Scenario-Based Strategic Planning For Future Civil Vertical Take-Off And Landing (Vtol) Transport, Woojin Choi, Steven Hampton

Journal of Aviation/Aerospace Education & Research

Rapid evolvement of the vertical take-off and landing (VTOL) technology in conjunction with recent robust R&D has demonstrated the technical feasibility of the civil VTOL system as a short-haul mass transit mode. Its combined benefits of a helicopter and a turboprop into one aircraft is expected to become an effective remedy for congested air traffic and difficulties with airport expansions in the metropolitan areas along with the potential benefit to improve accessibility to population centers and remote areas where conventional aircraft cannot access.

In this study, based on a the Political, Economic, Social, Technological, Environmental, and Legal (PESTEL) factors and …

Public Perception Of Different Planting Techniques Using Augmented Reality, Sultana Quader Tania

College of Graduate Studies: Theses & Dissertations

The objective of this study was to measure public perception of the different planting techniques (block and matrix), which are used at visitor information centers (VICs) and other rights of way (ROW) areas. The main factors that affect public perception of planting techniques were identified through an extensive literature review and qualitative survey from four welcome centers in the state of Georgia. The ranking of those indicators, based on public preferences, was discovered through a quantitative survey. During the first phase of the quantitative survey, images of block and matrix were used. An iOS-based user-friendly and cost-effective augmented reality (AR) …

Transit Agencies Performance Assessment And Implications, Parisa Hajibabaee

Graduate Theses, Dissertations, and Problem Reports (ETD)

Although most transit systems operate in small urban and rural areas in the United States, these systems have rarely received the same attention as their urban counterparts, both in terms of ensuring the efficiency and effectiveness of their operations and understanding the factors that affect their performance. This thesis's main goals are to assess the performance of rural and small urban public transit agencies and help them evaluate adopting a ridehailing program, thereby improving their performance. We applied operations research and decision-making tools to two public transit projects in small urban and rural areas. The first project focuses on three …

Multi-Objective Optimization Of A Ridesharing System Performance, Mohammad Nasr Azadani

Graduate Theses, Dissertations, and Problem Reports (ETD)

Ridesharing is a shared vehicle service with the potential to meet the growing travel demand due to population increase, economic growth, and shortage in transportation infrastructure capacity. Compared to the current system of predominantly using personal vehicles, ridesharing services reduce the number of vehicles while providing mobility services to the same number of people with no additional investment in the transportation infrastructure. One of the big challenges in implementing ridesharing services is matching drivers and riders. Conflicts between matching-objectives to comply with the interests of diverse stakeholders influence the efficiency of ridesharing in a transportation system. This study investigates the …

Micromechanical Prediction Model Of Viscoelastic Properties For Asphalt Mastic Based On Morphologically Representative Pattern Approach, Zhichen Wang, Naisheng Guo, Xu Yang, Shuang Wang

Michigan Tech Publications, Part 1

This paper is devoted to the introduction of physicochemical, filler size, and distribution effect in micromechanical predictions of the overall viscoelastic properties of asphalt mastic. In order to account for the three effects, the morphologically representative pattern (MRP) approach was employed. The MRP model was improved due to the arduous practical use of equivalent modulus formula solution. Then, a homogeneous morphologically representative model (H-MRP) with the explicit solution was established based on the homogenization theory. Asphalt mastic is regarded as a composite material consisting of filler particles coated structural asphalt and free asphalt considering the physicochemical effect. An additional interphase …

Evaluating The Polishing Of Skid Aggregates In Asphalt Using The British Pendulum Tester, Allison Nicole Givens

Graduate Theses, Dissertations, and Problem Reports (ETD)

To ensure the pavements in West Virginia have adequate skid resistance the Division of Highways evaluates and approves skid resistant aggregate sources for all wearing courses on roads with an ADT of 3,000 or greater. Unfortunately, the supply of skid aggregates in West Virginia is depleting quickly. To find a potential alternative to using skid resistant aggregates, laboratory polishing of asphalt samples was performed using a Circular Track Polishing Machine, and friction was tested using a British Pendulum Tester. The experiment was designed to investigate how a specific aggregate type provides skid resistance to a hot asphalt mixture.

The objective …

Lagrangian Relaxation Method For Integrated Vehicles And Drones Routing Model, Perawit Charoenwut

Chulalongkorn University Theses and Dissertations (Chula ETD)

Nowadays, e-commerce increases parcel transportation demand year by year. Many companies are seeking the way to improve performance of delivery service and cost-efficiency. One among many solutions is using a drone attached with a truck for the last mile delivery. A drone can be launched from either depot or truck and returned to the depot or wait for the truck to take them back from the docking station around the delivery area. The vehicle routing problem with drones considers truck- and drone-route simultaneously. It is an enormous problem that cannot be solved by a normal linear programming method. This research …

The Future Of Roundabouts In Northeast Ohio, Bret Baker

Williams Honors College, Honors Research Projects

For my honors project, I plan on doing a formal analysis of the type of intersection known as roundabouts. I want to approach the general topic of roundabouts and then focus on local roundabouts in Northeast Ohio. My analysis would include roundabouts currently in use, in the process of being constructed, as well as roundabout projects currently in design and future projects. I want to answer the questions, "What does the future of roundabouts look like in Northeast Ohio? Will there be more? Are they better than the traditional signalized or traffic sign intersections?" I will be using this information …

The Covid-19 Pandemic And Transportation Engineering, Chris Hendrickson,, Laurence Rilett

Department of Civil and Environmental Engineering: Faculty Publications

The COVID-19 pandemic has been an enormous global disruption with immense economic, environmental, and social impacts throughout the world. Only world wars and the flu pandemic of 1918 are comparable in the wide range of consequences, including fatalities, over a relatively short period of time. Unfortunately, we can expect other major disruptions to occur in the future. In this editorial, we intend to discern some lessons for the transportation engineering profession that can be learned from the current catastrophe that can help us prepare for future disruptions. We will ignore nontransportation aspects of the pandemic such as the development of …

Right-Hook Crash Scenario: Effects Of Environmental Factors On Driver's Visual Attention And Crash Risk, Mafruhatul Jannat, Hagai Tapiro, Christopher Monsere, David Hurwitz

Civil and Environmental Engineering Faculty Publications and Presentations

A right-hook (RH) crash is a common type of bicycle–motor vehicle crash that occurs between a right-turning vehicle and through-moving bicycle at an intersection in right-hand driving countries. Despite the frequency and severity of this crash type, no significant driver-performance based evidence of the causes of RH crashes at signalized intersections was found in the literature. This study examined the driver’s visual attention in a right-turning scenario at signalized intersections with bicycle lanes but no exclusive right-turning lanes while interacting with a bicyclist to develop an understanding of RH crash causality. Fifty-one participants in 21 simulated road scenarios performed a …

Wastewater Treatment Fatty Acids For Biodiesel Production, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Wastewater scum is the thick oily substance that floats on top of the primary and secondary tanks within a wastewater treatment plant. Scum has a 30% to 60% lipid content making it an excellent resource for the biodiesel industry. Also the use of scum would reduce the cost of current management practices such as landfill disposal or incineration. In this article there is an overview of lipid byproducts currently being produced at wastewater treatment plants today. This is followed by a presentation showing a full length process for turning wastewater scum into biodiesel raw material.

Seismic Behavior Of Composite Bridge Columns, Mohanad M. Abdulazeez

Doctoral Dissertations

“This study investigates experimentally and numerically the seismic behavior of large-scale hollow-core fiber-reinforced polymer-concrete-steel (HC-FCS) innovative bridge columns as a sustainable approach to endure and rapidly recover from natural disasters such as earthquakes. The HC-FCS column consisted of a concrete shell sandwiched between an outer fiber-reinforced polymer (GFRP) tube and an inner steel tube to provided continuous confinement for the concrete shell along with the height of the column. The columns have a slender inner steel tube with diameter-to-thickness (D_s/t_s) ratios ranged between 85 to 254. Each steel tube was embedded into the footing, while the …

Developing And Simulating A Communication Plan For Mitigation Of Secondary Crashes: Leveraging Connected Vehicle Technologies, Denis Elia Monyo

UNF Graduate Theses and Dissertations

The Federal Highway Administration (FHWA) has identified secondary crashes (SCs) on United States (US) highways as one of the core transportation issues that needs to be addressed. These crashes contribute to increased property damage, injuries, and fatalities and a decline in traffic flow conditions on freeways and adjacent arterials. The purpose of this study was to 1) propose a communication plan that leverages connected vehicle (CV) technologies to increase awareness to road users to target the mitigation of SCs, and 2) to evaluate the potential benefits of the proposed communication plan with CV technologies in alleviating SCs.

This study used …

Investigating The Leading Causes Of Fatalities Of Aging Pedestrians Using Bayesian Network Model, Luciano Lalika

UNF Graduate Theses and Dissertations

Identifying factors associated with older pedestrian fatalities is key to implementing strategies aimed at improving pedestrian safety. This study focused on investigating the leading risk factors for older pedestrian fatalities at Florida roadway intersections. Analyses consisted of a Bayesian logistic regression (BLR) model to identify significant factors influencing pedestrian fatality, followed by a Bayesian Network (BN) model to identify the leading cause of pedestrian fatality among the statistically significant risk factors. Furthermore, the probabilistic inference of the leading causes of older pedestrian fatalities obtained from the BN was conducted through individual evidence predictive inference, diagnostic inference, and combined evidence predictive …