Engineering Commons^™

Research On Intelligent Optimization Method Of Combat Sos Based On Gabc Algorithm, Hucheng Zhang, Jingyu Yang

Journal of System Simulation

Abstract: In order to solve the problem that exploratory simulation can not traverse the solution space quickly, and provide the auxiliary decision-making scheme in real time, a genetic algorithm based on classifier is proposed. The framework of simulation optimization method based on the algorithm is established. It can find the optimal solution according to the dynamic changes of key factors and decision targets of the system, which is suitable for such as seeking the best efficiency-cost ratio scheme and the optimization of the optimal power deployment and other systems. Based on the simulation bed system of the National Defense …

Chameleon Swarm Algorithm For Segmental Variation Learning Of Population And S-Type Weight, Damin Zhang, Yi Wang, Linna Zhang

Journal of System Simulation

Abstract: It is the best choice for intelligent algorithms to be applied to specific fields to explore strong searching ability, good reliability and stability.In this paper, aiming at the defects of chameleon swarm algorithm, such as unstable solution, low convergence accuracy and unbalanced search and development, a chameleon swarm algorithm (RMSCSA) based on population diversity segmental mutation learning and S-type weight is proposed. The refraction mirror learning strategy (RML) is introduced to make the chameleon more consistent with the observation in nature and enhance its diversity. The introduction of segmental variation of population diversity can keep the individuals with poor …

Large-Scale Multi-Objective Natural Computation Based On Dimensionality Reduction And Clustering, Weidong Ji, Yuqi Yue, Xu Wang, Ping Lin

Journal of System Simulation

Abstract: In multi-objective optimization problems, as the number of decision variables increases, the optimization ability decreases significantly. To solve "dimension disaster", a large-scale multi-objective natural computation method based on dimensionality reduction and clustering is proposed. The decision variables are optimized by locally linear embedding(LLE) to obtain the representation of high-dimensional variables in the low-dimensional space, then the individuals are grouped through K-means to select the appropriate guide individuals for the population to strengthen the convergence and diversity. To verify the effectiveness, the method is applied to the multi-objective particle swarm optimization algorithm and the non-dominated sorting genetic algorithm. The convergence …

Dynamic Risk Assessment Of Vocs Cross Regional Flow Based On Petri Nets, Guangqiu Huang, He Wang

Journal of System Simulation

Abstract: In order to evaluate the interaction between regions due to the cross regional flow of VOCs(volatile organic compounds) under polluted weather, a dynamic risk assessment method of cross regional flow of VOCs is proposed by using Petri net modeling method. The migration paths of VOCs between multiple potential pollution sources and contaminated areas are determined by HYSPLIT model, and the relationship between each migration path is described by Petri net; the dynamic risk assessment method is defined, and the calculation of dynamic risk is integrated into the operation of functional Petri net; through case analysis, the dynamic risk assessment …

Simulation-Based Adaptive Dynamic Scheduling For Bi-Objective Parallel Multi-Processor Open Shop, Yarong Chen, Shuchen Guan, Chengjun Huang, Lixia Zhu, Fuhder Chou

Journal of System Simulation

Abstract: Aiming at the parallel multi-processor open shop scheduling problem with uncertain job's release time,processing time and urgent jobs, an adaptive dynamic method integrating FlexSim simulation model and NSGA-Ⅱ algorithm is designed to optimize the bi-objectives of TWC(total weighted completion time) and TWT(total weighted tardiness). By using the FlexSim simulation model, this method determines the adaptive scheduling cycle according to the dynamic workload of the open shop, and conducts right-shift rescheduling to the urgent jobs. NSGA-Ⅱ algorithm is used to generate the bi-objective optimization scheduling scheme. Experimental results of a grain sorting shop show that compared with the rule-based real-time …

Research On System Of Virtual-Reality Fusion And Inquiry-Based Learning, Yongning Zhu, Zeru Lou, Tianxiang Wu, Jianmin Wang

Journal of System Simulation

Abstract: With the increasing interest in personalized and self-motivated education, emphasizing active learning and practical experiences, inquiry-based learning (IBL) is attracting interest in education. Considering the requirement for inquiry-based education, a framework of full process inquiry-based learning environment in the real-virtual worlds is designed. As an example, a mixed-reality chemical experiment system is developed. The metadata including user behavior data, interactive suite status and interactive interface status is collected through physical sensing. By mapping real-world status to the virtual world avatar, virtual experiments are simulated with computational dynamic solvers and real-time rendering. The generated images are sent back to the …

Knn Fault Detection Based On Reconstruction Error And Multi-Block Modeling Strategy, Jing Zheng, Weili Xiong, Xiaodong Wu

Journal of System Simulation

Abstract: For the fault monitoring algorithm based on k-nearest neighbor (kNN), the abnormal information that caused the fault is easy to be overwhelmed by the normal operating condition information, which leads to the problem of untimely fault detection and low alarm rate. A kNN fault monitoring method based on reconstruction error is proposed using auto-encoder and multi-block modeling strategy. The method uses the normal working condition data set to train the auto-encoder model, and extracts the reconstruction error based on the model to solve the problem that abnormal information is easy to be overwhelmed. Further considering the fault characteristics such …

Uniform Experimental Design With Constrained Region Based On Fruit Fly Algorithm, Jiawei Zhou, Xin Du, Youcong Ni, Hu Zhang, Hao Zhang, Haoran Ni, Feng Wang

Journal of System Simulation

Abstract: To solve the problems that existing two-phase differential evolutionary algorithms still have poor diversity of population distribution and weak local search ability in solving uniform designs in constrained experimental region, a new two-phase fruit fly optimization algorithm (ToPFOA) based on uniform experimental design is proposed. In the first stage, fruit fly search strategy combined with differential operator, K-means clustering and external document updating the centers of clusters is used todynamically improve distribution diversity of population in constrained region. In the second stage, a new fruit fly operator is designed to improve local search ability in constrained region. …

Drosophila Retina Simulation System And The Emergence Of Orientation Selectivity, Ziyu Liu, Yiran Zhuo, Zhuoyi Song

Journal of System Simulation

Abstract: To investigate the biophysical mechanisms underlying the Drosophila retinal computations, a piece of simulation software is constructed. By constructing the connectivity of the optical structure of the Drosophila compound eye with the neural network and retinal neuronal information encoding processes,, the retinal transformation from the light to the electrical signals is simulated. The photo-transduction model is optimized by a stochastic process. The generating mechanism of orientation selectivity (OS) is explored in the Drosophila retina's output neurons through a simulation system. Experiments show that with comparable simulation accuracy, the simulation speed increases by 40 times. The software can now be …

Research On Multiple Filter Signal Compensation For Washout Algorithm Optimization Of Flight Simulator, Weichao Liu, Hui Wang

Journal of System Simulation

Abstract: Aiming at the defects of signal loss and poor adaptability of the classical washout algorithm when applied to flight simulator, an optimization scheme of washing algorithm based on multiple filtering signal compensation is proposed. Analyzing the lost signal in classical washout algorithm, intercepting the lost signals to the depth filter with depth filtering strategy, basing on human perception errors and platform movement margin, after multiple filtering signal to certain proportion respectively compensation to the three channel of washout algorithm to achieve the maximum reduction of signal loss, thus reducing human perception error. The classical washing algorithm and the improved …

Modulation Recognition Method Of Mixed Signal Based On Intelligent Analysis Of Cyclic Spectrum Section, Yu Du, Xinquan Yang, Jianhua Zhang, Suchun Yuan, Huachao Xiao, Jingjing Yuan

Journal of System Simulation

Abstract: Aiming at the problems of low intelligence and poor adaptability for the existing mixed signal recognition methods, an intelligent recognition method based on cyclic spectral cross section and deep learning is proposed. For common mixed communication signals, the characteristics of zero frequency cross section of cyclic spectrum are theoretically deduced and analyzed. Two new pre-processing methods, nonlinear segmental mapping and directional pseudo-clustering are proposed, which can effectively improve the adaptability and consistency of cross section features. The pre-processed feature graph is combined with the residual network (ResNet), and the deep learning network is used to mine and analyze the …

Short-Time Human Activity Recognition Based On Wavelet Features Matching, Benyue Su, Li Zhang, Qingxuan He, Min Sheng

Journal of System Simulation

Abstract: The selection of features is the key problem in the study of human activity recognition. In order to obtain sufficient and stable behavioral features, long-time behavioral data that exceed one behavior cycle are often processed, while short-time behavioral data with less than one behavioral cycle are usually unstable, making it difficult to achieve accurate and stable identification. This paper proposes a short-time human activity recognition method based on the combination of wavelet transform and template matching. Coefficient features are extracted using wavelet transform method. The features of the short-time test samples are matched with the features in the template …

Scheduling Optimization Of Aluminum Extrusion Production Line Based On Timed Petri Net And Bso Algorithm, Yali Wu, Shuting He, Yanxi Yang, Lianqiang Feng, Fuqiang Wang, Yulu Chen

Journal of System Simulation

Abstract: For the problems of long production period and low efficiency caused by the complicated processes and large scheduling capacity of aluminum extrusion production line in industrial production, a timed Petri net (TdPN) scheduling model of aluminum extrusion production line is proposed and analyzed for reasonableness. The brain storm optimization (BSO) algorithm is introduced into the model, and an optimized scheduling algorithm for aluminum extrusion scheduling problems is proposed based on the individual encoding and decoding methods. The simulated annealing local search mechanism is used to improve the performance of BSO algorithm in the later stage, which can achieve the …

A Multi-Resolution Simulation Modeling Method, Zhaopeng Liu, Xinhai Xu, Bowen Yuan, Jinlu Zhang

Journal of System Simulation

Abstract: Aiming at the resolution gap between the operation task issued by the high-level commanders and the simulation system model instructions in the human-in-the-loop simulation deduction, a multi-resolution modeling method based on behavior tree is proposed. By improving the behavior tree syntax, the low-resolution combat missions are disaggregated into high-resolution simulation system instructions. By designing a decision model embedded in the behavior tree, the problem of resource uncertainty and execution effect uncertainty faced in the execution of model instructions is solved. A combat scenario for seizing air supremacy is designed to verify the effectiveness of the method.

Acknowledgments Of Reviewers

Journal of Sustainable Mining

No abstract provided.

Development Of Battery Materials To Function As Corrosion Protection On Car Body Plates, Tubagus Noor Rohmannudin, Sulistijono Sulistijono, Noval Adrinanda, Faridz Wira Dharma, Samuel Areliano

Journal of Materials Exploration and Findings

Most car bodies made for mass production are made from steel or aluminum. Both are strong metals, but steel is cheaper than aluminum and is more commonly used in lower-end cars for a broader consumer range. The weakness of steel compared to aluminum is that it is susceptible to corrosion under certain conditions, and thus it may deteriorate over time without proper care. To prevent corrosion, modern cars are coated with paint to prevent direct contact with the environment. As a second line of protection, a car battery can be connected to the body to create an impressed current cathodic …

Potential Of Biduri Fiber (Calotropis Gigantea) As Material For Oil Spill Absorbent, Anne Sukmawati, Wulan Septiani

Journal of Materials Exploration and Findings

Biduri fiber (Calotropis gigantea) is a natural hollow fiber with hydrophobic and oleophilic properties potentially used as oil spilled sorbent from seawater. This study aims to determine the absorption capacity and efficiency of the Biduri fiber and membrane to fuel oil. Measurement of oil absorption to seawater was carried out at various fiber weights (0.5-1.5 g), fiber composition (50-95%), contact time (10-90 minutes), temperature (30 and 50°C), and compared with commercial products. The results showed that the fiber weight variation of 0.5-1.5 g has an average absorption efficiency of 96.67%, and the highest absorption was obtained in a weight of …

Numerical Study Of Owls’ Leading-Edge Serrations, Asif Shahriar Nafi

Electronic Theses and Dissertations

The silent flight ability of owls is often attributed to their unique wing morphology and its interaction with their wingbeat kinematics. Among these distinctive morphological features, leading-edge serrations stand out – these are rigid, miniature, hook-like patterns located at the leading edge of the primary feathers of their wings. It had been hypothesized that these leading-edge serrations serve as a passive flow control mechanism, influencing the aerodynamic performance and potentially affecting the boundary layer development over the wing, subsequently influencing wake flow dynamics. Despite being the subject of research spanning multiple decades, a consensus regarding the aerodynamic mechanisms underpinning owls’ …

Editorial: Advances In Acoustic/Elastic Wave Sensing For Information Processing, Taehwa Lee, Chen Shen, Qingbo He

Henry M. Rowan College of Engineering Departmental Research

No abstract provided.

Influence Of Synthesis Conditions On The Physicochemical And Electrocatalytic Properties Of Non-Stoichiometric Ba2sr2la2ti4o12 Perovskites, Ofeliya Kostadinova, Iliyan Popov, Simeon M. Stankov, Hristo Kolev, Tamara Petkov

Karbala International Journal of Modern Science

Present work studies the influence of the pretreatment milling media (deionized water (BLTOS-H) and isopropanol (BLTOS-i)) on the surface characteristics, structure, chemical composition and catalytic activity of non-stoichiometric Ba2Sr2La2Ti4O12 perovskites. The IR spectroscopy and XRD analyses shows a difference in the structure and phase composition of the two materials. X-ray photoelectron spectroscopy detects a Ba2+- and La3+-enriched and Sr2+-depleted surface. The BLTOS-i sample appears to exhibit higher specific surface area (SSA) and pore volume in comparison to BLTOS-H. The electrochemical tests showed that BLTOS-H sample have similar behavior to platinum at current densi-ties up to 10 mA cm-2, while BLTOS-i …

Using Dielectric Scatters To Selectively Excite Embedded Eigenstates In Cavity Resonators, Olugbenga Joshua Gbidi

Theses and Dissertations

Bound states in the continuum (BICs) are waves that remain in the continuous spectrum of radiating waves that carry energy, however, still localized within the spectrum. BICs, also embedded eigenmodes, exhibit high quality factors that have been observed in optical and acoustic waveguides, photonic structures, and other material systems. Presently, there are limited means to select these BICs in terms of the quality factor and their excitation. In this work, we show that a different type of BIC, Quasi-BICs (Q-BICs), in open resonators can have their quality attuned by introducing embedded scatters. Using microwave cavities and dielectric scatters as an …

Hitting Two Birds With One Emissions-Based Maintenance Stone – A Literature Review On Improving Overall Productivity Of Underground Diesel Fleets, Johannes Deon Swanepoel, Jennifer Hines, Vinod Gopaldasani, Brian Davies

Journal of Sustainable Mining

Many industries regard occupational health and safety as a core value and an integral component to maintaining high productivity, and, thus, shareholder value. Diesel fleets’ engine maintenance is instrumental in ensuring affected workplaces meet production requirements while controlling health and safety hazards that these fleets introduce to the workplace. This systematic literature review focuses on production and occupational health and safety advantages associated with the implementation and adherence to an emissions-based maintenance (EBM) program. The literature review was conducted across eight databases relevant to workplace health and engineering. To be eligible for inclusion, the publication had to contain maintenance interventions …

Research On Vibration-Based Early Diagnostic System For Excavator Motor Bearing Using 1-D Cnn, Dorjsuren Yandagsuren, Tatsuki Kurauchi, Hisatoshi Toriya, Hajime Ikeda, Tsuyoshi Adachi, Youhei Kawamura

Journal of Sustainable Mining

In mining, super-large machines such as rope excavators are used to perform the main mining operations. A rope excavator is equipped with motors that drive mechanisms. Motors are easily damaged as a result of harsh mining conditions. Bearings are important parts in a motor; bearing failure accounts for approximately half of all motor failures. Failure reduces work efficiency and increases maintenance costs. In practice, reactive, preventive, and predictive maintenance are used to minimize failures. Predictive maintenance can prevent failures and is more effective than other maintenance. For effective predictive maintenance, a good diagnosis is required to accurately determine motor-bearing health. …

New Types Of Topologies And Neutrosophic Topologies, Florentin Smarandache

Neutrosophic Systems with Applications

In this paper, we recall the six new types of topologies that we introduced in the last years (2019-2022), such as: Refined Neutrosophic Topology, Refined Neutrosophic Crisp Topology, NeutroTopology, AntiTopology, SuperHyperTopology, and Neutrosophic SuperHyperTopology.

New Types Of Topologies And Neutrosophic Topologies, Florentin Smarandache

Neutrosophic Systems with Applications

In this paper, we recall the six new types of topologies that we introduced in the last years (2019-2022), such as: Refined Neutrosophic Topology, Refined Neutrosophic Crisp Topology, NeutroTopology, AntiTopology, SuperHyperTopology, and Neutrosophic SuperHyperTopology.

"Semiclassical Mastermind", Curtis Bair, Alexa S. Cunningham, Joshua Qualls

Posters-at-the-Capitol

Games are often used in the classroom to teach mathematical and physical concepts. Yet the available activities used to introduce quantum mechanics are often overwhelming even to upper-level students. Further, the "games" in question range in focus and complexity from superficial introductions to games where quantum strategies result in decidedly nonclassical advantages, making it nearly impossible for people interested in quantum mechanics to have a simple introduction to the topic. In this talk, we introduce a straightforward and newly developed "Semiclassical Mastermind" based on the original version of mastermind but replace the colored pegs with 6 possible qubits (x+, x-, …

Intro To Primary Sources, Katie Strand, Jen Kirk, Dan Davis, Lara Petersen

All E-Learning Resources

Attention: As of 2026 updated versions of this item will no longer be available on Digital Commons. Please contact [email protected] for more information.

The Identifying Primary Sources tutorial teaches students how they find, evaluate, and use primary sources in their own research. Along the way, they'll learn about some great places to start researching when looking for primary sources.

A Dtn-Based Spatio-Temporal Routing Using Location Prediction Model In Underground Mines, Abhay Goyal, Sanjay Kumar Madria, Samuel Frimpong

Computer Science Faculty Research & Creative Works

Situational awareness during any disaster depends on effective communication and location tracking. In the case of underground mines, where the communication methods are mostly central, the whole communication channel would be rendered unusable during a disaster. To this end, we propose the use of Delay Tolerant Networks (DTN) to allow the miners to function in a distributed manner and help in locating the injured miners and routing distress messages. Due to the unavailability of GPS signals, the pillar numbers are used to identify the locations of the miners. For spatio-temporal routing of messages, we formulate a new scheme using Contact …

Data Augmentation For Neutron Spectrum Unfolding With Neural Networks, James Mcgreivy, Juan J. Manfredi, Daniel Siefman

Faculty Publications

Neural networks require a large quantity of training spectra and detector responses in order to learn to solve the inverse problem of neutron spectrum unfolding. In addition, due to the under-determined nature of unfolding, non-physical spectra which would not be encountered in usage should not be included in the training set. While physically realistic training spectra are commonly determined experimentally or generated through Monte Carlo simulation, this can become prohibitively expensive when considering the quantity of spectra needed to effectively train an unfolding network. In this paper, we present three algorithms for the generation of large quantities of realistic and …

Predicting Young’S Modulus Of Indian Coal Measure Rock Using Multiple Regression And Artificial Neutral Network, Sayantan Chakraborty, Rohan Bisai, Rohit Roy, Sathish Kumar Palaniappan, Samir Kumar Pal, Karanam Uma Maheshwar Rao

Journal of Sustainable Mining

Accurate information on Young’s modulus (E) is required for simulating rock deformation in mines; on the other hand, it is very cumbersome to obtain in the laboratory and collecting drilled cores in sufficient amounts, especially in the case of soft rocks, is quite impossible. Empirical equations were deducted for E from easily determinable rock properties, and the final model was selected through different statistical strength parameter tests. The generalization of the equation was verified through the normal distribution tests of residues of the equation. R2 came to be 0.609 and was validated using an artificial neural network with an improved …